I have 2 concerns.
1. How can I configure geofence alert in WsO2iot3.1.0-Updte7?
I did it in Update1 but according to documentation online: Monitoring Devices Using Location Based Services
<GeoLocationConfiguration> bloc is missing in cdm-config.xml file of Update7.
This is missing geofence settings in cdm-config.xml file
When I run the script mvn clean install -f siddhi-geo-extention-deployer.xml, and deploy Geo Analytics artifacts in devicemgt, nothing is displayed about geofence alerte (exit, enter, stationnary, speed) as in Update1.
nothing is displayed about geofence alerte (exit, enter, stationnary, speed)
2. New remote feature in devicemgt. We really appreciate but when we clic on active/connected device, it just in waiting device to connect status. Nothing is prompted.
Wainting on device to connect even when the device is active.
Remote session is enabled in cdm-config.xml file.
1. How can I configure geofence alert in WsO2iot3.1.0-Updte7?
From IoTS-3.1.0-Update 5 onward <GeoLocationConfiguration> configuration has been changed as <OperationAnalyticsConfiguration>. Please refer IoTS 3.2.0 Documentation for more details.
2. New remote feature in devicemgt.
This feature is only work with COPE type enrollments. You might need to enroll your device as COPE device, by installing vendor signed system service. Please refer Integrating the Android System Service Application documentation for more details about integrating the system service.
Related
My issue is while launching the RemoteApp it keeps spinning and says "Configuring remote session". Not all the time, though. It was launching a while ago and signed off. Now again launched the RemoteApp it just spinning.
And when I try to cancel it won't Cancel the RemoteApp I have to kill through the Task manager.
After killing it, I launched again and it just worked as expected
I need to get this fixed. Please suggest a resolution for me.
RDS is on Windows server 2012 R2
Client launching from Windows 10
Could you please let us know the following details.
Is this a recurring issue or 1 time occurred issue?
Please try to telnet the remote machine and check whether it's reachable or not when this problem occurs and share the feedback with us.
And also try the below solutions also, may be it'll fix this RDB freezing issue.
Try to see whether reducing Graphics helps.
This seems to have helped in few cases. This verifies whether you have the correct graphics driver.
Here’s how:
Right click the Windows desktop and choose Personalize.
Click "Display Settings".
Click "Advanced Settings”.
Click on "Troubleshoot" tab.
Click on "Change Settings".
On the resulting Display Adapter Troubleshooter dialog box, drag the slider one notch to the left.
If changing the video hardware acceleration solves the problem, it's a signal that your computer's video driver isn't quite perfect.
In such cases, download the driver from the link below.
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&os=WW1&osl=en&catid=&impid=&SystemID=STUDIOXPS8100
Connect and see if there’s any improvement.
Security software could also be one of the reasons.
Temporarily disable them and verify the result.
Try disabling Receive Window Auto-Tuning.
Here is what you need to do:
Go to Start and type cmd.
Right-click on cmd and select “Run as administrator”.
Type: netsh interface tcp set global autotuninglevel=disabled and press Enter.
If you want to to re-enable it:
Type: netsh interface tcp set global autotuninglevel=normal and press Enter.
If this doesn’t help, please post your concerns at Technet forums for further support.
http://social.technet.microsoft.com/Forums/en/w7itpronetworking/threads
Note: Ensure to enable all your security software by now.
If the above steps unsuccess, use below steps and try the same.
Logon to the Remote Desktop Services Session Host computer as an administrator
Start--Run gpedit.msc
In the left pane, under Computer Configuration, navigate to following:
Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
In the right pane, double-click on Set compression algorithm for RDP data
Select Enabled, and choose Balances memory and network bandwidth
Click OK to save the change
Apologies in advance for somewhat vague information. I am new to Citrix XenApp/XenDesktop technology and am just looking for generic troubleshooting information.
At my place of employment we have kiosks that are configured to connect to a SaaS webapp. These kiosk have either the Citrix XenApp or XenDesktop installed.
One of the icons launches the IE browser that connects to the SaaS app using a preconfigured user account. Sometimes, however, instead of launching the browser, the system displays the "The session limit has been reached. Please contact your system administrator." error shown in below image.
The people administering these kiosks think that this message comes from the SaaS web application but that application does not enforce any limits on how many session are open for a given account under a given time.
Also considering how Citrix XenApp/XenDesktop works I would think (but maybe I am wrong) that if the SaaS app did reject a user login, we would be displayed an error message in Internet Explorer instead of this ICA prompt.
So I think that the issue here could be that the message is not about login sessions made to the background SaaS app but either about Citrix sessions or perhaps previous IE browsers somehow running in the background(?)
However our company's Citrix team looked at this and noticed that "Citrix was still active" when this prompt was displayed. The conclusion was then that Citrix is for that reason not the cause here.
So I wanted here to ask some questions on what things I could consider as causes and where I could look in the hopes of getting started on this issue.
This would be for XenApp / XenDesktop 7.18.
The questions I have:
Does XenApp / XenDesktop have log files that can be consulted for
debugging issues like this?
Is it possible to get XenApp / XenDesktop to run in debug mode (to
output more details to the log files)?
Does Citrix have configuration settings that could lead it to
have an issue like this?
A. First check the event logs and see when you facing this issue so does any event logs generated.
B. Also you can check the ICA configuration tool for session settings and checked if session settings are set to NEVER.
C. The ICA listener configuration tool is located at Start > All Programs > Citrix > Administration Tools > ICA Listener Configuration.
You are on the right track with the SaaS application itself reporting the error. If this Citrix session was already active when the icon was clicked again and the preconfigured user was already logged into the SaaS application, that would account for this error. To investigate, logout the Citrix session and try clicking the icon again, or check SaaS application to see if that preconfigured users is already connected.
Is the same user used for all these kiosks or is each kiosk supposed to have a unique user? Can this preconfigured user log in multiple times?
When i try to launch the google assistant it crashes displaying the following error.
And when it reply it either say :
"There as been an error try in a few second"
"There as been a glitch"
ON_MUTED_CHANGED:
{'is_muted': False}
ON_START_FINISHED
[19218:19229:ERROR:speech_processing_task.cc(646)] Detected communication error: Downstream closed prematurely.
ON_CONVERSATION_TURN_STARTED
[19218:19229:ERROR:speech_processing_task.cc(646)] Detected communication error: Downstream closed prematurely.
[19218:19229:ERROR:assistant_output_handler.cc(589)] Failed with a general speech recognition error
ON_ASSISTANT_ERROR:
{'is_fatal': False}
ON_RESPONDING_STARTED:
{'is_error_response': True}
ON_RESPONDING_FINISHED
ON_CONVERSATION_TURN_FINISHED:
{'with_follow_on_turn': False}
[19218:19229:ERROR:speech_processing_task.cc(340)] S3 connection has timed out: No data from S3
[19218:19229:ERROR:speech_processing_task.cc(646)] Detected communication error: Downstream closed prematurely.
I am connected to the raspberry pi via ssh and can ping so i don't think it is a connection issue.
This my first post let me know if there is something i need to change or details i might have forget.
[upadate] i checked on myactivities and nothing appear in the logs but when I try with my smartphone it logs it properly
Also I updated my raspberry pi3 to the latest version and still no change in the error log
I had the same problem.
The thing was that the google assistant api wasn´t enabled.
do ctrl+c and run this command with env
python -m googlesamples.assistant.grpc.pushtotalk
When it says Press enter to send a new request, press enter and say something.
It will give you an error with a lot of command lines.
The last paragraph is important.
It´s here :-
PERMISSION_DENIED, Google Assistant API has not been used in project integrigate before or it is disabled. Enable it by visiting https://console.developers.google.com/apis/api/embeddedassistant.googleapis.com/overview?project=projectname then retry.
If you enabled this API recently, wait a few minutes for the action to propagate to our systems and retry.)>
copy and paste the link in your browser and click enable api.
once it is finished
run the command below
google-assistant-demo.
It should work now.
Yusonious
I'm building a hybrid app that speaks to a Bluemix app. I've got Mobile Application Security and Mobile Quality Assurance as a service. I'm using IBMLogger to send log messages, like so:
IBMBluemix.getLogger().info("Device successfully registered: "+ JSON.stringify(response));
I was under the impression that the MobileFirst-style services on Bluemix acted somewhat like the same components for a local MF install. I'm trying to find where I can see my log files in the BM console but have not been able to find them.
For a local MF install using the hybrid SDK, you have to specifically say you want your logs sent to the server, but I do not see that option when looking at the hybrid docs for BM/MF.
There is some doc here: https://www.ng.bluemix.net/docs/starters/mobile/mobilecloud/nodejsmobile.html#log
I suppose by default the log goes to the console, which you can retrieve through the loggregator, aka do cf logs <yourapp> --recent. You can also use the Monitoring & Analytics service to retain logs - see the above doc.
Having a tough time with this issue. Not sure how but my ApplicationPoolIdentity is broken.
Currently I'm running IIS 8 on Windows 8 with Visual Studio 2012. When trying to debug an application from Visual Studio, or just navigating to the site in a browser I get the following error logged and a 503 error.
Application pool 'DefaultAppPool' is being automatically disabled due to a series of failures in the process(es) serving that application pool.
If I check out the Application error logs, I find the following error from the User Profile Service.
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - The system cannot find the path specified.
Upon looking into the details I find that the User Profile Service is trying to load up a profile with the Id
S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415
Now I opened up the registry to try and find the profile with that UserId. However there's nothing in the Profile list that helps.
So digging around a little more I've found that this issue can be resolved by either
A) Set the Load User Profile of the Application Pool to false.
B) Use a different account for the application pool.
C) Fix the account.
Seeing how this is the built in account, I'd prefer to fix the issue rather than fix the sympton.
What I have tried
aspnet_regiis -i
Removing IIS from windows and reinstalling.
Attempted to follow the guide here but I don't know the account password :P
My hunch
Somehow the ApplicationPoolIdentity got messed up. Is there any physical folders for the built-in accounts? I know that the Network and Local service profiles physical directories exist at C:\Windows\ServiceProfiles\. It is possible to recreate the ApplicationPoolIdentity profile? Or am I way off on what the real issue is?
C) Here is what i did to fix the account
Go in regedit at key
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
There is a setting called "Default". You have to make sure that the data value point to an existing directory on the drive.
By default it contains "%SystemDrive%\Users\Default". In my company the default is changed to a custom profile. Somehow, someone deleted that user profile. So when the defaultAppPool user tryed to create an accound for himself, it was unable to do so because windows cannot provide him with a default user profile.
You can also diagnose this error when looking at the Event Viewer under the Application folder. You will get a message of that type:
Windows cannot find the local profile and is logging you on with a
temporary profile. changes you make to this profile will be lost when
you log off.