I'm trying to figure out the best way in Swift to add values to an Array that is a Value in a Dictionary. I want to build a dictionary of contacts sorted by the first letter of their first name. For example [A : [Aaron, Adam, etc...], B : [Brian, Brittany, ect...], ...]
I found this function:
updateValue(_:forKey:)
And tried using it in a loop:
for contact in self.contacts.sorted() {
self.contactDictionary.updateValue([contact], forKey: String(describing: contact.characters.first))
}
But when I tried to use that it replaced the existing array with a new one. I know I can manually check to see if the key in the dictionary exists, if it does, retrieve the array and then append a new value, otherwise add the new key/value pair but I'm not sure if Swift provides an easier/better way to do this.
Any insight would be much appreciated!
You can use reduce(into:) method (Swift4) and as follow:
let contacts = ["Aaron", "Adam", "Brian", "Brittany", ""]
let dictionary = contacts.reduce(into: [String:[String]]()) { result, element in
// make sure there is at least one letter in your string else return
guard let first = element.first else { return }
// create a string with that initial
let initial = String(first)
// initialize an array with one element or add another element to the existing value
result[initial] = (result[initial] ?? []) + [element]
}
print(dictionary) // ["B": ["Brian", "Brittany"], "A": ["Aaron", "Adam"]]
If you are using Swift3 or earlier you would need to create a mutable result dictionary inside the closure:
let contacts = ["Aaron", "Adam", "Brian", "Brittany", ""]
let dictionary = contacts.reduce([String:[String]]()) { result, element in
var result = result
guard let first = element.first else { return result }
let initial = String(first)
result[initial] = (result[initial] ?? []) + [element]
return result
}
print(dictionary) // ["B": ["Brian", "Brittany"], "A": ["Aaron", "Adam"]]
Note that the result is not sorted. A dictionary is an unordered collection. If you need to sort your dictionary and return an array of (key, Value) tuples you can use sorted by key as follow:
let sorted = dictionary.sorted {$0.key < $1.key}
print(sorted)
"[(key: "A", value: ["Aaron", "Adam"]), (key: "B", value: ["Brian", "Brittany"])]\n"
Swift 4's new dictionary initializers can do it all for you:
let contactInitials = contacts.filter{!$0.isEmpty}.map{ ($0.first!,[$0]) }
let dict = [Character:[String]](contactInitials, uniquingKeysWith:+)
Related
I have two dictionaries in Swift with few similar values which are in dynamic mode:
dict1 = ["a1":"value 1", "b1":"value2", "c1":"value 3"]
dict2 = ["b1": "value2", "d1": "value4"]
If I want to compare these two dictionaries and want to extract only the matching keys even nested, how do I about to do that?
If you want the common keys with the value in one of them :
let intersectionDict = dict1.filter { dict2.keys.contains($0.key) }
//Or
let intersectionDict2 = dict2.filter { dict1.keys.contains($0.key) }
If you want the values to match too:
let intersectionDict3 = dict1.filter { dict2[$0.key] == $0.value }
And the result is:
print(intersectionDict3) //["b1": "value2"]
As others have shown, you can do this using a filter statement. You can make it even quicker by always filtering the smaller of the two dicts, improving the time complexity from O(dict1.size) to O(min(dict1.size, dict2.size).
extension Dictionary {
func intersectingByKeys(with other: Dictionary) -> Dictionary {
let (smallerDict, largerDict) = (self.count < other.count) ? (self, other) : (other, self)
return smallerDict.filter { key, _ in largerDict.keys.contains(key) }
}
}
let dict1 = ["a1":"value 1", "b1":"value2", "c1":"value 3"]
let dict2 = ["b1": "value2", "d1": "value4"]
print(dict1.intersectingByKeys(with: dict2))
You can create a Set from the keys of one of the dictionaries and call intersection on the Set with the keys of the other dictionary.
let matchingKeys = Set(dict1.keys).intersection(dict2.keys) // {"b1"}
I have a dictionary, like this:
{"Matt":"Apple", "Calvin":"Nut", "Susie":"Pear"}
I want to check the keys of the dictionary with a string, to see if they contain that string-- and if they do, I want to add their respective value to an array
So, if the input was "a"
the return would be ["Apple", "Nut"] because "Matt" and "Calvin" matched the "a"
Basically looking for some Swift tips,
otherwise I was going to implement it like this:
Grab all keys, put into an array
Filter keys for string value, this is the keyArray
Enumerate over keyArray, and get all their values from the dictionary
Boom have an array of values
You can filter the dictionary, using contains() on each key,
and then extract the corresponding values:
let dict = [ "Matt":"Apple", "Calvin":"Nut", "Susie":"Pear" ]
let input = "a"
let values = Array(dict.filter { $0.key.contains(input) }.values)
print(values) // ["Apple", "Nut"]
Or with flatMap() (renamed to compactMap() in Swift 4.1):
let values = dict.flatMap { $0.key.contains(input) ? $0.value : nil }
print(values) // ["Apple", "Nut"]
Here each dictionary entry is mapped to the value if the key contains
the given string, and to nil otherwise. flatMap() then returns an
array with the non-nil values.
Simply using a filter over the dictionary:
let dict: [String: String] = ["Matt": "Apple", "Calvin": "Nut", "Susie": "Pear"]
func findValuesMatching(search: String, in dict: [String: String]) -> [String] {
return dict
.filter { (key, value) in
return key.range(of: search) != nil
}.map { (key, value) in
return value
}
}
print(findValuesMatching(search: "a", in: dict))
Do it like this:
let dict = ["Matt":"Apple", "Calvin":"Nut", "Susie":"Pear"]
let containsA = dict.filter({ $0.key.lowercased().contains("a") }).map({ $0.value })
Output:
["Apple", "Nut"]
I'm trying to figure out the best way in Swift to add values to an Array that is a Value in a Dictionary. I want to build a dictionary of contacts sorted by the first letter of their first name. For example [A : [Aaron, Adam, etc...], B : [Brian, Brittany, ect...], ...]
I found this function:
updateValue(_:forKey:)
And tried using it in a loop:
for contact in self.contacts.sorted() {
self.contactDictionary.updateValue([contact], forKey: String(describing: contact.characters.first))
}
But when I tried to use that it replaced the existing array with a new one. I know I can manually check to see if the key in the dictionary exists, if it does, retrieve the array and then append a new value, otherwise add the new key/value pair but I'm not sure if Swift provides an easier/better way to do this.
Any insight would be much appreciated!
You can use reduce(into:) method (Swift4) and as follow:
let contacts = ["Aaron", "Adam", "Brian", "Brittany", ""]
let dictionary = contacts.reduce(into: [String:[String]]()) { result, element in
// make sure there is at least one letter in your string else return
guard let first = element.first else { return }
// create a string with that initial
let initial = String(first)
// initialize an array with one element or add another element to the existing value
result[initial] = (result[initial] ?? []) + [element]
}
print(dictionary) // ["B": ["Brian", "Brittany"], "A": ["Aaron", "Adam"]]
If you are using Swift3 or earlier you would need to create a mutable result dictionary inside the closure:
let contacts = ["Aaron", "Adam", "Brian", "Brittany", ""]
let dictionary = contacts.reduce([String:[String]]()) { result, element in
var result = result
guard let first = element.first else { return result }
let initial = String(first)
result[initial] = (result[initial] ?? []) + [element]
return result
}
print(dictionary) // ["B": ["Brian", "Brittany"], "A": ["Aaron", "Adam"]]
Note that the result is not sorted. A dictionary is an unordered collection. If you need to sort your dictionary and return an array of (key, Value) tuples you can use sorted by key as follow:
let sorted = dictionary.sorted {$0.key < $1.key}
print(sorted)
"[(key: "A", value: ["Aaron", "Adam"]), (key: "B", value: ["Brian", "Brittany"])]\n"
Swift 4's new dictionary initializers can do it all for you:
let contactInitials = contacts.filter{!$0.isEmpty}.map{ ($0.first!,[$0]) }
let dict = [Character:[String]](contactInitials, uniquingKeysWith:+)
I've looked through the methods here but I can't quite find what I'm looking for. I'm new-ish to Swift. I would like to extract a subset from a Dictionary based on a Set of key values, preferably without a loop.
For example, if my key Set is of type Set<String> and I have a Dictionary of type Dictionary<String, CustomObject>, I would like to create a new Dictionary of type Dictionary<String, CustomObject> that contains only the key-value pairs associated with the keys in the Set of Strings.
I can see that I could do this with for loop, by initializing a new Dictionary<String, CustomObj>(), checking if the original Dictionary contains a value at each String in the set, and adding key-value pairs to the new Dictionary. I am wondering if there is a more efficient/elegant way to do this however.
I'd be open to finding the subset with an Array of Strings instead of a Set if there is a better way to do it with an Array of keys.
Many thanks!
Swift 5 - You can do this very simply:
let subsetDict = originalDict.filter({ mySet.contains($0.key)})
The result is a new dictionary with the same type as the original but which only contains the key-value pairs corresponding to the keys in mySet.
Your assumption is correct, there is a more concise/swift-ish way to accomplish what you need.
For example you can do it via reduce, a functional programming concept available in Swift:
let subDict = originalDict.reduce([String: CustomObject]()) {
guard mySet.contains($1.key) else { return $0 }
var d = $0
d[$1.key] = $1.value
return d
}
Or, in two steps, first filtering the valid elements, and then constructing back the dictionary with the filtered elements:
let filteredDict = originalDict.filter { mySet.contains($0.key) }
.reduce([CustomObject]()){ var d = $0; d[$1.key]=$1.value; return d }
forEach can also be used to construct the filtered dictionary:
var filteredDict = [CustomObject]()
mySet.forEach { filteredDict[$0] = originalDict[$0] }
, however the result would be good it it would be immutable:
let filteredDict: [String:CustomObject] = {
var result = [String:CustomObject]()
mySet.forEach { filteredDict2[$0] = originalDict[$0] }
return result
}()
Dummy type:
struct CustomObject {
let foo: Int
init(_ foo: Int) { self.foo = foo }
}
In case you'd like to mutate the original dictionary (instead of creating a new one) in an "intersect" manner, based on a given set of keys:
let keySet = Set(["foo", "baz"])
var dict = ["foo": CustomObject(1), "bar": CustomObject(2),
"baz": CustomObject(3), "bax": CustomObject(4)]
Set(dict.keys).subtracting(keySet).forEach { dict.removeValue(forKey: $0) }
print(dict) // ["foo": CustomObject(foo: 1), "baz": CustomObject(foo: 3)]
I have a simple Dictionary which is defined like:
var dict : NSDictionary = [ 1 : "abc", 2 : "cde"]
Now I want to add an element into this dictionary: 3 : "efg"
How can I append 3 : "efg" into this existing dictionary?
You're using NSDictionary. Unless you explicitly need it to be that type for some reason, I recommend using a Swift dictionary.
You can pass a Swift dictionary to any function expecting NSDictionary without any extra work, because Dictionary<> and NSDictionary seamlessly bridge to each other. The advantage of the native Swift way is that the dictionary uses generic types, so if you define it with Int as the key and String as the value, you cannot mistakenly use keys and values of different types. (The compiler checks the types on your behalf.)
Based on what I see in your code, your dictionary uses Int as the key and String as the value. To create an instance and add an item at a later time you can use this code:
var dict = [1: "abc", 2: "cde"] // dict is of type Dictionary<Int, String>
dict[3] = "efg"
If you later need to assign it to a variable of NSDictionary type, just do an explicit cast:
let nsDict = dict as! NSDictionary
And, as mentioned earlier, if you want to pass it to a function expecting NSDictionary, pass it as-is without any cast or conversion.
you can add using the following way and change Dictionary to NSMutableDictionary
dict["key"] = "value"
I know this might be coming very late, but it may prove useful to someone.
So for appending key value pairs to dictionaries in swift, you can use updateValue(value: , forKey: ) method as follows :
var dict = [ 1 : "abc", 2 : "cde"]
dict.updateValue("efg", forKey: 3)
print(dict)
SWIFT 3 - XCODE 8.1
var dictionary = [Int:String]()
dictionary.updateValue(value: "Hola", forKey: 1)
dictionary.updateValue(value: "Hello", forKey: 2)
dictionary.updateValue(value: "Aloha", forKey: 3)
So, your dictionary contains:
dictionary[1: Hola, 2: Hello, 3: Aloha]
If your dictionary is Int to String you can do simply:
dict[3] = "efg"
If you mean adding elements to the value of the dictionary a possible solution:
var dict = Dictionary<String, Array<Int>>()
dict["key"]! += [1]
dict["key"]!.append(1)
dict["key"]?.append(1)
Swift 3+
Example to assign new values to Dictionary. You need to declare it as NSMutableDictionary:
var myDictionary: NSMutableDictionary = [:]
let newValue = 1
myDictionary["newKey"] = newValue
print(myDictionary)
For whoever reading this for swift 5.1+
// 1. Using updateValue to update the given key or add new if doesn't exist
var dictionary = [Int:String]()
dictionary.updateValue("egf", forKey: 3)
// 2. Using a dictionary[key]
var dictionary = [Int:String]()
dictionary[key] = "value"
// 3. Using subscript and mutating append for the value
var dictionary = [Int:[String]]()
dictionary[key, default: ["val"]].append("value")
In Swift, if you are using NSDictionary, you can use setValue:
dict.setValue("value", forKey: "key")
Given two dictionaries as below:
var dic1 = ["a": 1, "c": 2]
var dic2 = ["e": 3, "f": 4]
Here is how you can add all the items from dic2 to dic1:
dic2.forEach {
dic1[$0.key] = $0.value
}
Dict.updateValue updates value for existing key from dictionary or adds new new key-value pair if key does not exists.
Example-
var caseStatusParams: [String: AnyObject] = ["userId" : UserDefault.userID ]
caseStatusParams.updateValue("Hello" as AnyObject, forKey: "otherNotes")
Result-
▿ : 2 elements
- key : "userId"
- value : 866
▿ : 2 elements
- key : "otherNotes"
- value : "Hello"
[String:Any]
For the fellows using [String:Any] instead of Dictionary below is the extension
extension Dictionary where Key == String, Value == Any {
mutating func append(anotherDict:[String:Any]) {
for (key, value) in anotherDict {
self.updateValue(value, forKey: key)
}
}
}
As of Swift 5, the following code collection works.
// main dict to start with
var myDict : Dictionary = [ 1 : "abc", 2 : "cde"]
// dict(s) to be added to main dict
let myDictToMergeWith : Dictionary = [ 5 : "l m n"]
let myDictUpdated : Dictionary = [ 5 : "lmn"]
let myDictToBeMapped : Dictionary = [ 6 : "opq"]
myDict[3]="fgh"
myDict.updateValue("ijk", forKey: 4)
myDict.merge(myDictToMergeWith){(current, _) in current}
print(myDict)
myDict.merge(myDictUpdated){(_, new) in new}
print(myDict)
myDictToBeMapped.map {
myDict[$0.0] = $0.1
}
print(myDict)
To add new elements just set:
listParameters["your parameter"] = value
There is no function to append the data in dictionary. You just assign the value against new key in existing dictionary. it will automatically add value to the dictionary.
var param = ["Name":"Aloha","user" : "Aloha 2"]
param["questions"] = "Are you mine?"
print(param)
The output will be like
["Name":"Aloha","user" : "Aloha 2","questions" : ""Are you mine"?"]
To append a new key-value pair to a dictionary you simply have to set the value for the key. for eg.
// Initialize the Dictionary
var dict = ["name": "John", "surname": "Doe"]
// Add a new key with a value
dict["email"] = "john.doe#email.com"
print(dict)
Output -> ["surname": "Doe", "name": "John", "email": "john.doe#email.com"]
var dict = ["name": "Samira", "surname": "Sami"]
// Add a new enter code herekey with a value
dict["email"] = "sample#email.com"
print(dict)
Up till now the best way I have found to append data to a dictionary by using one of the higher order functions of Swift i.e. "reduce". Follow below code snippet:
newDictionary = oldDictionary.reduce(*newDictionary*) { r, e in var r = r; r[e.0] = e.1; return r }
#Dharmesh In your case, it will be,
newDictionary = dict.reduce([3 : "efg"]) { r, e in var r = r; r[e.0] = e.1; return r }
Please let me know if you find any issues in using above syntax.
Swift 5 happy coding
var tempDicData = NSMutableDictionary()
for temp in answerList {
tempDicData.setValue("your value", forKey: "your key")
}
I added Dictionary extension
extension Dictionary {
func cloneWith(_ dict: [Key: Value]) -> [Key: Value] {
var result = self
dict.forEach { key, value in result[key] = value }
return result
}
}
you can use cloneWith like this
newDictionary = dict.reduce([3 : "efg"]) { r, e in r.cloneWith(e) }
if you want to modify or update NSDictionary then
first of all typecast it as NSMutableDictionary
let newdictionary = NSDictionary as NSMutableDictionary
then simply use
newdictionary.setValue(value: AnyObject?, forKey: String)