i want my variable to inherit the label of my turtles.
im making routes for them and want them to remember the last place they visited.
so theyll continue to the next place in the chain.
ifelse last_place = home
[set place min-one-of (turtles with [label = "mall"])[distancemyself]]
[set place min-one-of (turtles with [label = "home"])[distancemyself]]
i cant use my actual code in here but hopefully, you get the gist
if
place = one-of turtles with [label = "mallI]
I want to add
set last_place label of place
i want last_place to get the label of place.
i know it can create loops if i have the same place twice in the same route but i want to create a list to prevent them but right now i need a sort of where flag that will make my turtles keep going to the end.
Hard to say without seeing more of your code- it's hard to know what turtle is doing what. If your code is sensitive, I'd recommend following the tips in the MCVE guidelines to make a reproducible example- it might be easier to address your exact problem that way!
As an alternative, instead of using a label it's probably better to just have the turtles store the "location" turtle or patch in a turtle-variable. Using this simple example setup:
breed [ walkers walker ]
breed [ locations location ]
walkers-own [ location-list ]
to setup
ca
create-walkers 10 [
setxy random-pxcor random-pycor
set location-list []
pd
]
create-locations 20 [
set size 1.5
set shape "house"
setxy random-pxcor random-pycor
]
reset-ticks
end
You can have turtles store the places they visit in a list and reference them that way.
to go
ask walkers [
; Build an agrentset of locations that do not belong
; to each turtle's 'location-list'
let unvisited-locations locations with [
not member? self [location-list] of myself
]
; Target the nearest unvisited location
let target min-one-of unvisited-locations [ distance myself ]
; if the target exists, move towards it
if target != nobody [
face target
ifelse distance target > 1 [
fd 1
] [
move-to target
set location-list lput target location-list
]
]
; if a turtle visits all locations, remove the
; first location visited from the 'location-list'
; so that it will follow the same pattern continuously
if length location-list = count locations [
set location-list but-first location-list
]
]
tick
end
Related
I am a beginner with NetLogo and I am trying to ask some turtles (students from different social classes) to link to other turtles (schools). What I would like is for the working class students to look for the school with the highest achievement which is at the same not expensive and has not reached the max number of links allowed. If the desired school has reached the max number of links allowed I want the student to look for the next school with the highest achievement which has not reached the max number of links allowed and so on.
This is the code. I get the following message "ANY? expected input to be an agentset but got the turtle (school 1) instead."
breed [schools school]
breed [upperclass upperclass-student]
breed [workingclass workingclass-student]
upperclass-own [achievement enrolled? target]
workingclass-own [achievement enrolled? target]
schools-own [schoolachievement expensive? ]
to setup
clear-all
set-default-shape schools "house"
set-default-shape upperclass "person"
set-default-shape workingclass "person"
ask patches [ set pcolor 8 ]
create-schools num-of-schools [ setxy random-xcor random-ycor set schoolachievement random-normal 5 1
set expensive? one-of [ true false ] ]
create-upperclass num-of-upperclass [ set color white setxy random-xcor random-ycor set achievement
random-normal 5 1 ] ;Students from upper class have higher achievement
create-workingclass num-of-workingclass [ set color red setxy random-xcor random-ycor set achievement
random-normal 4 1 ]
end
to go
ask workingclass [
choose-school ]
end
to choose-school
if breed = workingclass [
set target one-of schools with-max [ schoolachievement ] with [ expensive? = false ] ]
if any? target with [ count link-neighbors < max-link-count ] [
create-link-with target ]
set enrolled? TRUE
end
Your problem is the difference between an agent and an agentset, which is a somewhat subtle problem. The with-max returns an agentset - a set of agents (in this case turtles). That agentset can have 0 members, 1 member, 2+ members but is a set even if it is empty. However, the one-of selects one agent from the agentset and returns it as an agent, not an agentset. That is, NetLogo knows anything that is returned by one-of must be exactly one agent. At this point, primitives that are for agentsets (like any?) will throw an error unless they can also be used on individual agents.
So, back to your code. I like the readability of checking whether there are viable schools and then selecting one, which is what I think you meant to do. That would be:
to choose-school
if breed = workingclass
[ set targets schools with-max [ schoolachievement ] with [ expensive? = false ]
set candidates targets with [ count link-neighbors < max-link-count ]
if any? candidates
[ create-link-with one-of candidates
set enrolled? TRUE
]
]
end
Note that I also changed to targets instead of target, which is one way to keep track of whether something is an agent or an agentset.
The other way you could do this and keep it as an agent is:
to choose-school
if breed = workingclass [
set target one-of schools with-max [ schoolachievement ] with [ expensive? = false ] ]
if target != nobody and [count link-neighbors] of target < max-link-count [
create-link-with target ]
set enrolled? TRUE
end
So you can use nobody instead of any? but you can't also use with in that line because the with is really a filter on a set.
I also think you have a bracketing issue - I assume you want set enrolled? TRUE inside the brackets. I left it in the second fix, but changed in the first error (as well as changing bracket position convention to make the code block structure more visible)
I am creating a simulation which copies shoplifter behaviour. Turtles are split between "professional" and "novice" shoplifters and if "professionals" are apprehended by store security they might (1/2) want to select a new store to target "new-store-required".
"professional" shoplifters target the store with the lowest "security" value in a certain radius, all values are set as they are created.
I am trying to set a new "target-store", a "store" in-radius 10 with the second lowest "security", i.e. excluding the current "target-store" but I am having difficulty.
So far I have attempted to made several additions to the following code to exclude the current target store, this includes variations of "member? my patches" as the "store" where the shoplifter has been apprehended is added to this "patch-set" which will inform a later command. Also I have made a list of ascending "security" values to tell the "shoplifter" to target the "store" with "security" (the value which determines store vulnerability) the same as item 1 on the list, but I fear this might not work because their original target-store might not necessarily be item 0 as they target the store with the lowest "security" in a 10 unit radius.
These are the lines of code I am working with at the moment, any suggestions would be greatly appreciated.
***Edit: I could ideally like the code to make use of "mypatches" so each time a professional shoplifter is apprehended at a store that store can be added to mypatches and the subsequent target-store can exclude all stores which are members of mypatches.
to new-target-store
ask turtles [ if
new-store-required = 1 and professional = 1 and (random-float 1 < 0.5) [
set target-store min-one-of store in-radius 10 [security]
]
]
end
Edit 2: I've fixed what was wrong.
You may want to include your setup code, or a stripped-down version of it if it's really long, to make sure that answers conform to the structure you've used. I would approach this by having a turtles-own variable to store their current target, which they can try to fill if it is empty (rather than using an extra boolean for that purpose). Also, you may want to convert your 1/0 options to true/false for cleaner code. Check out this example setup:
globals [ stores ]
patches-own [ security ]
turtles-own [
current-target
professional?
mypatches
]
to setup
ca
ask n-of 20 patches [
set pcolor green
set security 1 + random 10
]
set stores patches with [ pcolor = green ]
crt 5 [
setxy random-xcor random-ycor
pd
set professional? one-of [ true false ]
set current-target nobody
set mypatches ( patch-set )
]
reset-ticks
end
This sets up a world with some green patches that are grouped into the patch-set called stores. Also, you have some turtles that have the boolean professional? set to either true or false. They initialize with no current-target store, and an empty mypatches patch-set variable.
Now, you can have turtles check if their current-target exists. If it does not, they can assign a store to that variable from the set of stores (possible-targets, here) that are not equal to the patch-here of the asking turtle. Professional thieves can further refine possible-targets to exclude any stores at which they have been apprehended, by excluding any stores that are a member of their mypatches patch-set variable. More details in comments:
to go
ask turtles [
; if you have no target currently
if current-target = nobody [
; Create a temporary patch set made up of all stores except for
; the one that I'm currently in
let possible-targets stores with [ self != [patch-here] of myself ]
ifelse professional? [
; Have professional thieves revise their possible targets to exclude
; any in the patchset mypatches, then choose a possible target
set possible-targets possible-targets with [ not member? self [mypatches] of myself ]
set current-target min-one-of possible-targets in-radius 10 [ security ]
] [
; Have amateur thieves choose randomly from the possible targets
set current-target one-of possible-targets
]
]
; move closer to your current target, or
; move to it exactly if you're near enough
ifelse current-target != nobody [
face current-target
ifelse distance current-target > 1 [
fd 1
] [
move-to current-target
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; *** do your shoplifting attempt/check here ***
; For this example, just have professional thieves sometimes
; add this patch to their mypatches patchset
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
if professional? and random-float 1 < 0.5 [
set mypatches ( patch-set mypatches patch-here )
]
; Reset current-target to nobody
set current-target nobody
]
] [
; if no suitable nearby targets, wander randomly
rt random 61 - 30
fd 1
]
]
tick
end
If you run that long enough, eventually your professional thieves will stop being able to find target stores as they have added all stores to their mypatches variable.
I'm modeling territory selection in NetLogo, and would like my turtles to calculate the perimeter of their territory once established. I've been trying to come up with ideas for how to do this, but haven't found a good means yet. Any ideas?
patches-own
[ owner ] ;; patches know who owns them
turtles-own
[ territory ;; agentset of patches I own
food ;; food acquired in my territory
threshold ] ;; food required, will build territory until meet this
to go
tick
ask turtles [ build-territory ]
end
to build-territory
if food > threshold [ calculate-perimeter ] ;; stop building when enough food
pick-patch ;; keep picking patches until meet threshold.
end
to calculate-perimeter
;; what could I use to add up the perimeter of the territory?
end
Thanks in advance for any suggestions!
A modification of my last answer to you:
to setup
ca
ask patches with [pxcor > 0 ] [
set pcolor white
]
crt 1
end
to go
ask turtles [
let blacklist patches with [ pcolor = black ]
let northpatches patches with [ pycor > 0 ]
let northred ( northpatches with [ member? self blacklist = false ] )
ask northred [ set pcolor red ]
let border northred with [ any? neighbors4 with [ pcolor != red ] ]
ask border [
set pcolor blue
]
print count border
]
end
You can designate border/perimeter patches as any of you territory patches with neighbors that are not territory. For you it might look something like:
ask turtles [
print count territory with [ any? neighbors4 with [owner != myself ]
]
]
Again, I can't test it without your setup so you would have to modify.
Edited below
To count the edges of patches that are on the border, you could have them count their neighbors4 that belong to another turtle. Then, they can add them to that turtle's perimeter length. For example:
to assess-perimeter ;;; must be called by a turtle
print ("Assessing perimeter")
let current-turtle who
let temp-per-len 0
let border-patches patches with [ owner = current-turtle and any? neighbors4 with [ owner != current-turtle ] ]
show (word "I have " count border-patches " border patches")
ask border-patches [
;; One way to get each border patch to check each of its neighbors
let nobodies 4 - count neighbors4 ;; if any patches are on the edge of the world, returns the number of those edges
let non-territory-edges count neighbors4 with [ owner != current-turtle ]
let border-edges nobodies + non-territory-edges
set temp-per-len temp-per-len + border-edges
]
show (word "My perimeter length: " temp-per-len )
set perimeter-length temp-per-len
end
If that is called after all turtles have chosen their entire home range, the idea is that each turtle assesses the border of its home range. Then, it has each of those border patches count its neighbors4 that have a different owner. I used "temp-per-len" as a summing variable within the loop, which is then used to set the turtles-own "perimeter-length". Full model code, including setup and definitions, here. Note- you'll have to download or copy the code, the model is too bulky to run well in the HTML format.
Also, I didn't actually count to make sure this worked perfectly- I did a quick version and crossed my fingers, but I think the idea makes sense and hopefully gets you started.
I'm new to NetLogo and am attempting to model home range selection of subsequent colonizers. The model should follow simple steps:
Individual 1 picks a home range (a subset of patches).
When individual 1 is done picking its home range, it hatches new
individual 2.
Individual 2 picks a home range, then hatches individual 3.
Individual 3 picks a home range, and so on.
I'm having trouble figuring out how to get this to work. I can get the first turtle to pick a home range. But the offspring do not. Writing the code numerous ways has only accomplished two unintended outcomes. Either endless new individuals are hatched simultaneously, before the first turtle has a home range, and the new turtles fail to pick a home range. Or, the first turtle picks its home range and hatches a new turtle, but that new turtle doesn't pick a home range. Neither outcome is what I want.
How do I set this up to run as intended, so that hatchlings pick home ranges too? Here is one simplified version of my code:
to setup-turtles
crt 1
[setxy random-xcor random-ycor]
end
to go
ask turtles [pick-homerange]
tick
end
to pick-homerange
while [food-mine < food-required] ;; if not enough food, keep picking patches for home range
[;; code to pick home range until it has enough food; this is working okay
]
[;; when enough food, stop picking home range
hatch 1 fd 20 ;; now hatch 1, move new turtle slightly away
]
end
So it is at this last part, once the home range is built, that I want a new turtle to hatch from its parent. I then want that turtle to repeat the pick-homerange procedure. How could that be coded to happen? I've tried writing this every way I can think of; nothing is working. Thanks in advance for any assistance!
One way to do this is to have each patch equal one "food value", and have turtles grow their home range until their home range supplies them with enough food. I would set this up so that patches "know" to which turtle they belong, and so that turtles know how much food they need, which patches are part of their home range, and the food supplied by their homerange. Example patch and turtle variables would then be:
patches-own [
owned_by
]
turtles-own [
food_required
my_homerange
homerange_food
]
Then, your turtles can add patches into their home range until they hit their "food_required", whatever you set that as. For simplicity, in this example I assume that turtles are territorial and so won't "share" home ranges. Further explanation of steps is commented in the code below. This is intended just to get you started- for example, it will hang if you run pick-homerange too many times.
to setup-turtles
crt 1 [
set size 1.5
setxy random-xcor random-ycor
set food_required 5 + random 5
set homerange_food 0
set my_homerange []
]
end
to pick-homerange
ask turtles [
;; Check if the current patch is owned by anyone other than myself
if ( [owned_by] of patch-here != self ) and ( [owned_by] of patch-here != nobody ) [
;; if it is owned by someone else, move to a new patch that is not owned
let target one-of patches in-radius 10 with [ owned_by = nobody ]
if target != nobody [
move-to target
]
]
;; Now add the current patch into my homerange
ask patch-here [
set owned_by myself
]
set my_homerange patches with [ owned_by = myself ]
;; calculate the number of patches currently in my homerange
set homerange_food count patches with [owned_by = myself]
;; Now grow the homerange until there are enough patches in the homerange
;; to fulfill the "food_required" variable
while [ homerange_food < food_required ] [
let expander one-of my_homerange with [ any? neighbors with [ owned_by = nobody ] ]
if expander != nobody [
ask expander [
let expand_to one-of neighbors4 with [ owned_by = nobody ]
if expand_to != nobody[
ask expand_to [
set owned_by [owned_by] of myself
]
]
]
]
;; Reassess homerange food worth
set my_homerange patches with [ owned_by = myself ]
set homerange_food count patches with [owned_by = myself]
]
ask my_homerange [
set pcolor [color] of myself - 2
]
;; Now that my homerange has been defined, I will hatch a new turtle
hatch 1 [
set color ([color] of myself + random 4 - 2)
]
]
end
I have individuals (turtles) and I have households (turtles with fixed xy)
I have a variable address stored at households. I have a number of a family attached to individuals. The households has the same number.
How can I ATTACH or MOVE the individuals to their corresponding household?
I tried something like:
ask individuals
[ if family = [family-place] of household
[
move-to [address] of household
]
]
Since it is a slow monday morning, here is how I would do it.
I assume familiy-number to be the name of the common number in both moving and sessile turtles. I would use let to create a local variable that only works within the procedure. (See the procedure go-home for this)
breed [walkers walker]
breed [houses house]
houses-own [family-number]
walkers-own [family-number]
to setup
clear-all
set-default-shape houses "house"
create-houses 10 [
setxy random-xcor random-ycor
set family-number random 10000
]
reset-ticks
end
to leave-home
ask houses [
hatch-walkers 1 [
set family-number [family-number] of myself
set color [color] of myself
set heading random 360
fd 1
]
]
end
to go
ask walkers [
rt random 120
lt random 120
fd 1
]
tick
end
to go-home
ask walkers [
let family-place one-of houses with [family-number = [family-number] of myself]
move-to family-place
fd 1 ;; walker will step away one step so we can see him.
]
end
Just copy it into NetLogo, make a button for each procedure and play. Works best if in the order
setup
leave-home
go
go-home
Hope this helps!
move-to household should do it.
I'm having trouble understanding your question, so I've having to guess at what you want, but with the help of your comment on Bryan's answer, maybe I've guessed right?
ask individuals [
move-to one-of households with [address = [family-place] of myself]
]
if this seems confusing because of the myself, you could also write it as:
ask individuals [
let f family-place
move-to one-of households with [address = f]
]