How to schedule ECS tasks on AWS Fargate - amazon-ecs

I have created a Task Definition on Elastic Container Service and have successfully run it in a Fargate cluster. However when I create a Scheduled Task in said cluster the option for "Launch Type" is hardcoded to EC2. Is there a way, perhaps through the command line to schedule the task to run on Fargate?

Heads up ! This is now supported in AWS:
https://aws.amazon.com/about-aws/whats-new/2018/08/aws-fargate-now-supports-time-and-event-based-task-scheduling/
Although not in some regions - As at Apr-19 it still wasn't supported in EU-west-2 (London). Check the table at the top of this page to see if it's supported in the region you want: https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduled_tasks.html

There seem to be no way of scheduling a task on FARGATE.
Only way it can be done right now seems to be by having your 'scheduler' external to ECS. I did it with a lambda. You can also use something like a jenkins or a simple cron task that fires the aws-cli command to ECS, in both these cases though you will need an instance always running.
I wrote a lambda that accepts the params (overrides) to be sent to the ECS task and has the schedule the task was supposed to have.
Update:
It seems there is a schedule tab in FARGATE Cluster details now that will allow you set cron schedules on ECS tasks.

While the AWS Documentation gives you ways to do this through CloudFormation, it seems like they've not yet released this feature anyway. I have been trying to do something similar and ran into the same issue.
Once it does become available, this link from the aws docs should be useful. Here's how they suggest doing it, but I keep running into errors saying NetworkConfiguration is not recognized and LaunchType is not recognized.
"EcsParameters": {
"Group": "string",
"LaunchType": "string",
"NetworkConfiguration": {
"awsvpcConfiguration": {
"AssignPublicIp": "string",
"SecurityGroups": [ "string" ],
"Subnets": [ "string" ]
}
},
Update: Here is an alternative that did end up working for me through the aws events put-targets command on the aws cli!
Make sure your aws cli is up to date. This method fails for older
versions of the cli. run this to update: pip install awscli --upgrade --user
After that, you should be good to go. Use the aws events put-targets --rule <value> --targets <value> command. Make sure that before you run this command you have a rule already defined on your cluster. If not, you can do that with the aws events put-rule cmd too. Refer to the AWS docs for put-rule, and for put-targets.
An example of a rule from the documentation is given below:
aws events put-rule --name "DailyLambdaFunction" --schedule-expression "cron(0 9 * * ? *)"
The put-targets command that worked for me is this:
aws events put-targets --rule cli-RS-rule --targets '{"Arn": "arn:aws:ecs:1234/cluster/clustername","EcsParameters": {"LaunchType": "FARGATE","NetworkConfiguration": {"awsvpcConfiguration": {"AssignPublicIp": "ENABLED", "SecurityGroups": [ "sg-id1233" ], "Subnets": [ "subnet-1234" ] }},"TaskCount": 1,"TaskDefinitionArn": "arn:aws:ecs:1234:task-definition/taskdef"},"Id": "sampleID111","RoleArn": "arn:aws:iam:1234:role/eventrole"}'

You can create a CloudWatch rule that uses a schedule as the event source and an ESC task as the target.

No this is not supported yet unfortunately. There is an open issue here. Hopefully it gets done soon as I would like to use it as well!

Disclosure: I work for SenseDeep that provides Powerdown # https://www.powerdown.io
Other services provide this functionality. PowerDown gives the ability to schedule Fargate services. This is at the service level, not the task level, but it is easy to create services for tasks. For example: you could schedule a CICD pipeline container to run 9-5 M-F.

It's not possible to have EC2 instances and Fargate instances at the same cluster.
It's possible to schedule a Fargate instance. Create a specific service and update that from aws tools. Ex:
aws ecs update-service --service my-http-service --task-definition
https://docs.aws.amazon.com/cli/latest/reference/ecs/update-service.html
Useful resources:
You could use the ECS aws tools and execute on lambda or travis.
Check out this medium post:
https://medium.com/#joseignaciocastelli92/how-to-create-a-continuous-deployment-process-using-ecs-fargate-docker-travis-410d84b4d99e
At the button has this repository that has the aws commands:
https://github.com/JicLotus/ecs-farate-scripts-to-deploy-and-build
Bests

Related

AWS EMR cluster with cloudformation: how to enable debugging

When creating an EMR cluster via the UI, I can click 'enable debugging'.
Via the cli, I can add the parameter --enable-debugging.
How can I do it via cloudformation? I did give a LogUri, where I do see the logs, but the EMR web UI carries on telling me 'Debugging not configured' when running Spark jobs.
It just is added as the first step in the steps...so the equivalent of the below in CloudFormation config.
"Steps": [{
"Name": "Setup Hadoop Debugging",
"ActionOnFailure": "TERMINATE_CLUSTER",
"HadoopJarStep": {
"Jar": "command-runner.jar",
"Args": ["state-pusher-script"]
}
}]
The accepted answer is almost correct.
I received an error while deploying: CloudFormation currently only supports long-running clusters, set ActionOnFailure to CANCEL_AND_WAIT or CONTINUE.
So, the following code worked for me (also, YAML version for those, who would like to copypaste that format):
Steps:
- Name: SetupHadoopDebugging
ActionOnFailure: CONTINUE
HadoopJarStep:
Jar: command-runner.jar
Args:
- 'state-pusher-script'

Deregister oldest task definition in ecs with aws cli

I have to remove old task definitions from aws cli?
Does any one have idea or any useful links that i can follow.
From console we can do manually but is there any automation we can set here?
e.g. aws ecs deregister-task-definition --task-definition curler:1 ?
https://docs.aws.amazon.com/cli/latest/reference/ecs/deregister-task-definition.html

How to force fargate service to be launched only from AWS Lambda

I've created a simple task to print a hello world. I've created a ECR image, docker compose and ecs-params.yml.
I get the cloudwatch log for the print, but the task keeps launching every minute, which I guess it's due to REPLICA service type.
How can I stop this from happening, I want to launch this Fargate task ONLY from a lambda, and when it finishes I don't it to be relaunched.
Thanks in advance
If you want a one-shot / one-off / standalone task to be launched by ECS and have it run until it finishes, you wouldn't use an ECS service definition but merely a task.
You can run tasks on their own without packaging as an ECS service.
See: https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs_run_task.html
If you are using the ECS CLI, then there is also ecs-cli compose create. So, you would use that call and not the one also creating an ECS service along with it.
You can then use AWS Lambda and send an ecs:RunTask AWS API call to invoke/start the ECS task.

Run task defintion after stack creation

The question seems simple enough. I have a bunch task definitions and a cluster in my CloudFormation template. When setting up manually I would create a task based on any definition and provide it with a CRON definition. It would then start to run.
I can't seem to find this option in CF? I found service but this only works for tasks that run indefinitely, which mine are not (they run once per day for approx. 10-20 minutes).
After some research I found out about AWS::Events::Rule which people seem to only use in conjunction with Lambda which I do not. I was unable to find any example that referenced FARGATE tasks so I'm not sure it's even possible.
If anyone has any examples of running tasks in CRON using CF, that would be great.
I think that ECS scheduled tasks (cron) would suit you:
Amazon ECS supports the ability to schedule tasks on either a cron-like schedule or in a response to CloudWatch Events. This is supported for Amazon ECS tasks using both the Fargate and EC2 launch types.
This is based on CloudWatch Events which can be used to schedule many things, not only lambda.
To setup it using CloudFormation you can use AWS::Events::Rule with the target of AWS::Events::Rule EcsParameters

Timeout configuration for CloudFormation

I am running CloudFormation updates to ECS. Triggered by CodePipeline. I would like to abort the CloudFormation deployment and rollback to the previous version after a timeout.
What is the best way to accomplish this? I saw something about WaitConditions but I'm not sure that is the right mechanism.
I also found that you can configure a TimeoutInMinutes on nested stacks https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-stack.html#cfn-cloudformation-stack-timeoutinminutes - but sounds like you cannot apply a similar property at the top level of the stack or to an arbitrary resource?
Is there another way that I can use the combination where I can abort the Codepipeline->Cloudformation->ECS deployment after a few minutes if it doesn't succeed?
This is a general gripe with CodePipeline ECS Deploy action (ECS, not ECS B/G) that if you push a bad image, you will have to wait 1hr for the timeout to occur before you can retry the pipeline.
At the moment, CodePipeline doesn't support rollbacks. You can detect a failed pipeline using CloudWatch [1] and take some action. The action will probably be roll-forward to a good version.
[1] Detect and React to Changes in Pipeline State with Amazon CloudWatch Events - https://docs.aws.amazon.com/codepipeline/latest/userguide/detect-state-changes-cloudwatch-events.html
We don't use CodePipeline, we're using Sceptre. But I guess my workaround could still work.
My workaround for this problem is that before triggering a deployment, run a script in the background.
./deployment-breaker.sh &
And for the script
#!/bin/bash
sleep 600
$deploymentStatus = (aws cloudformation describe-stack --stack-name STACK_NAME | jq XXX)
if [[ $deploymentStatus == YOUR_TERMINATE_CONDITION ]]then
aws cloudformation cancel-update-stack --stack-name STACK_NAME
fi