I have a folder full of jpg files which all end with "-x-large.jpg" I would like to rename them all using command line so that it gets rid of the -x-large and just becomes .jpg.
So for example 123-x-large.jpg will become 123.jpg
Can someone tell me how I can do this with the ren command?
Thanks.
for img in *-x-large.jpg; do mv -i -v "$img" "${img%-x-large.jpg}.jpg"; done
This loops on all matching images and moves them into a new file with a truncated name (removing -x-large.jpg from the end) with the .jpg added back to the end of the file name. I'm invoking this interactively with mv -i so you are prompted before overwriting each file. To force overwriting (always say "yes"), change that to mv (remove the -i). To prevent overwriting (always say "no"), change that to mv -n.
Remove the -v (verbose) if you don't want to see each rename happen.
If you have a very large number of these files, the command line will be too long for the above command (since *-x-large.jpg will be expanded onto a command line). You can work around that with find and xargs as follows:
sh <(find . -maxdepth 1 -name '*-x-large.jpg' \
|sed -r 's/(.*)(-x-large.jpg)$/mv -i "\1\2" "\1.jpg"/')
This creates a shell script using bash process substitution, using find to generate a list of all files we want to rename and then piping them through sed to create the mv commands.
(See above for the mv flags. I removed -v because presumably this will be a very long list.)
See the version below if you want to check the script before running it.
The above one-liner requires GNU bash or Korn shell (ksh) as well as GNU sed.
Here's how to do it with neither (in three commands):
find . -maxdepth 1 -name '*-x-large.jpg' \
|sed 's/.*/mv "&" "&/; s/-x-large.jpg$/.jpg"/' > temp.sh
sh temp.sh
rm temp.sh
Posix sed doesn't reliably support capture groups (\(…\) or sed -r to invoke ERE) and therefore we can't expect it to be able to match and recall text, so this version simply writes most of the command and then fixes the ending (the absence of a trailing double quotes in the first replacement is intentional; we add it in the second replacement). Posix shell (/bin/sh proper) doesn't support process substitution, so we dump to a temporary file, evaluate it, and then remove it.
If we're referring to Windows command-line, then SET /? is your friend. Loads of good info in there.
setlocal ENABLEDELAYEDEXPANSION
set SEARCH_SUFFIX=-x-large.jpg
set REPLACE_SUFFIX=.jpg
for %%A in ("*%SEARCH_SUFFIX%") do (
set OLD_NAME=%%~nxA
set NEW_NAME=!OLD_NAME:%SEARCH_SUFFIX%=%REPLACE_SUFFIX%!
ren "!OLD_NAME!" "!NEW_NAME!"
)
endlocal
Related
First off, I'd like to say that I know this is almost an exact duplicate of some posts that I've read, but have not had any luck with referencing.
I have 100+ files that all follow a very strict naming convention of 5_##_<name>.ext My issue was that when originally making these files I failed to realise that 5_100_ and above would mess up my ordering.
I am now trying to append a 0 in front of every number between 01 and 99. I've written a bash script using sed that works for the file contents (the file name is in the file as well):
#!/bin/bash
for fl in *.tcl; do
echo Filename: $fl
#sed -i 's/5_\(..\)_/5_0\1_/g' $fl
done
However, this only changes the contents and not the filename itself. I've read that mv is the solution (rename is simpler but I do not have it on my system). My current incarnation of my multiple attempts is:
mv "$fl" $(echo "$file" | sed -e 's/5_\(..\)_/5_0\1_/g') but it gives me an error: mv: missing destination file operand after <filename>
Again, I'm sorry about the duplicate but I wasn't able to solve my issue by reading it. I'm sure I'm just using the combination of mv and sed incorrectly.
Solution was entered in the comments. I was using $file instead of $fl.
Something like this might be useful:
for n in $(seq 99)
do
prefix2="5_$(printf "%02d" ${n})_"
prefix3="5_$(printf "%03d" ${n})_"
for f in ${prefix2}*.tcl
do
suffix="${f#${prefix2}}"
[[ -r "${prefix3}${suffix}" ]] || mv "${prefix2}${suffix}" "${prefix3}${suffix}"
done
done
Rather than processing every single file, it only looks at the ones that currently have a "5_XX_" prefix, and only renames them if the corresponding "5_XXX_" file doesn't already exist...
#!/bin/bash
for fl in *.tcl
do
NewName="$(echo "${fl} | sed '/^5_[0-9]\{2\}_/ s/../&0/' )"
#echo "Filename: ${fl} -> ${NewName}
[ ! "${fl}" = "${NewName}" ] && mv ${fl} ${NewName}
done
With a bit a securisation a allow to pass several time on same folder (changing only needed one).
Under linux (non posix sed by default), use sed --posix instead of simple sed call
Does sed -i work on AIX?
If not, how can I edit a file "in place" on AIX?
The -i option is a GNU (non-standard) extension to the sed command. It was not part of the classic interface to sed.
You can't edit in situ directly on AIX. You have to do the equivalent of:
sed 's/this/that/' infile > tmp.$$
mv tmp.$$ infile
You can only process one file at a time like this, whereas the -i option permits you to achieve the result for each of many files in its argument list. The -i option simply packages this sequence of events. It is undoubtedly useful, but it is not standard.
If you script this, you need to consider what happens if the command is interrupted; in particular, you do not want to leave temporary files around. This leads to something like:
tmp=tmp.$$ # Or an alternative mechanism for generating a temporary file name
for file in "$#"
do
trap "rm -f $tmp; exit 1" 0 1 2 3 13 15
sed 's/this/that/' $file > $tmp
trap "" 0 1 2 3 13 15
mv $tmp $file
done
This removes the temporary file if a signal (HUP, INT, QUIT, PIPE or TERM) occurs while sed is running. Once the sed is complete, it ignores the signals while the mv occurs.
You can still enhance this by doing things such as creating the temporary file in the same directory as the source file, instead of potentially making the file in a wholly different file system.
The other enhancement is to allow the command (sed 's/this/that' in the example) to be specified on the command line. That gets trickier!
You could look up the overwrite (shell) command that Kernighan and Pike describe in their classic book 'The UNIX Programming Environment'.
#!/bin/ksh
host_name=$1
perl -pi -e "s/#workerid#/$host_name/g" test.conf
Above will replace #workerid# to $host_name inside test.conf
You can simply install GNU version of Unix commands on AIX :
http://www-03.ibm.com/systems/power/software/aix/linux/toolbox/alpha.html
You can use a here construction with vi:
vi file >/dev/null 2>&1 <<#
:1,$ s/old/new/g
:wq
#
When you want to do things in the vi-edit mode, you will need an ESC.
For an ESC press CTRL-V ESC.
When you use this in a non-interactive mode, vi can complain about the TERM not set. The solution is adding export TERM=vt100 before calling vi.
Another option is to use good old ed, like this:
ed fileToModify <<EOF
,s/^ff/gg/
w
q
EOF
you can use perl to do it :
perl -p -i.bak -e 's/old/new/g' test.txt
is going to create a .bak file.
Have been looking at SED documention but need a little pointer in the right direction
I have 200 files I want to modify in a batch.
Source is html file.
Need to create a new file for the changes.
Want to delete the first part of each file up to the first tag (This is 20 or so lines but can vary slightly).
Then insert the contents of a source file (the same for all files) into the new target file starting at line 1, for 30 or so lines. The number of lines to insert does not match the number that are deleted though.
Hope you can help.
Paul
This can certainly be done with sed(1), but I would probably use the vanilla editor ed(1).
$ cat > bigfix.sh
for i in "$#"; do
ed "$i" << \eof
1,/<tag>/-1d
0r otherfile.html
w
q
eof
done
$ sh bigfix.sh file*.html
This shell script takes arguments and runs ed(1) on each arg. It deletes lines starting from the first and ending on the line right before the one with <tag>. It then puts otherfile.html at the top and writes out the result.
For an individual file:
sed -e '1,/tag/{/tag/r insertfile' -e ';d}' inputfile > outputfile
For many files:
find . -name 'criterion*.ext' -type f -exec sh -c 'sed -e "1,/tag/{/tag/r insertfile" -e ';d}" "{}" > "{}.new"' \;
Edit:
Fixed the find command to use sh because of the redirection. Note the change in quoting from the previous version.
I cannot get in-place editing Perl one-liners running under ActivePerl to work unless I specify them with a backup extension:
C:\> perl -i -ape "splice (#F, 2, 0, q(inserted text)); $_ = qq(#F\n);" file1.txt
Can't do inplace edit without backup.
The same command with -i.bak or -i.orig works a treat but creates an unwanted backup file in the process.
Is there a way around this?
This is a Windows/MS-DOS limitation. According to perldiag:
You're on a system such as MS-DOS that gets confused if you try reading from a deleted (but still opened) file. You have to say -i.bak, or some such.
Perl's -i implementation causes it to delete file1.txt while keeping an open handle to it, then re-create the file with the same name. This allows you to 'read' file1.txt even though it has been deleted and is being re-created. Unfortunately, Windows/MS-DOS does not allow you to delete a file that has an open handle attached to it, so this mechanism does not work.
Your best shot is to use -i.bak and then delete the backup file. This at least gives you some protection - for example, you could opt not to delete the backup if perl exits with a non-zero exit code. Something like:
perl -i.bak -ape "splice...." file1.txt && del file1.bak
Sample with recursive modify and delete both done by find. Works on e.g. mingw git bash on windows.
$ find . -name "*.xml" -print0 | xargs -0 perl -p -i.bak -e 's#\s*<property name="blah" value="false" />\s*##g'
$ find . -name "*.bak" -print0 | xargs -0 rm
Binary terminated values passed between find/xargs to handle spaces. Unusual s/ prefix to avoid mangling xml in search term. This assumes you didn't have any .bak files hanging around to begin.
I use sed to substitute text in files.
I want to give sed a file which contains all the strings to be searched and replaced in a given file.
It goes over .h and .cpp files. In each file it searches for file names which are included in it. If found, it substitutes for example "a.h" with "<a.h>" (without the quotes).
The script is this:
For /F %%y in (all.txt) do
for /F %%x in (allFilesWithH.txt) do
sed -i s/\"%%x\"/"\<"%%x"\>"/ %%y
all.txt - List of files to do the substitution in them
allFilesWithH.txt - All the include names to be searched
I don't want to run sed several times (as the number of files names in input.txt.) but I want to run a single sed command and pass it input.txt as input.
How can I do it?
P.S I run sed from VxWorks Development shell, so it doesn't have all the commands that the Linux version does.
You can eliminate one of the loops so sed only needs to be called once per file. Use
the -f option to specify more than one substitution:
For /F %%y in (all.txt) do
sed -i -f allFilesWithHAsSedScript.sed %%y
allFilesWithHAsSedScript.sed derives from allFilesWithH.txt and would contain:
s/\"file1\"/"\<"file1"\>"/
s/\"file2\"/"\<"file2"\>"/
s/\"file3\"/"\<"file3"\>"/
s/\"file4\"/"\<"file4"\>"/
(In the article Common threads: Sed by example, Part 3 there are many examples of sed scripts with explanations.)
Don't get confuSed (pun intended).
sed itself has no capability to read filenames from a file. I'm not familiar with the VxWorks shell, and I imagine this is something to do with the lack of answers... So here are some things that would work in bash - maybe VxWorks will support one of these things.
sed -i 's/.../...' `cat all.txt`
sed -i 's/.../...' $(cat all.txt)
cat all.txt | xargs sed -i 's/.../...'
And really, it's no big deal to invoke sed several times if it gets the job done:
cat all.txt | while read file; do sed -i 's/.../.../' $file; done
for file in $(cat all.txt); do # or `cat all.txt`
sed -i 's/.../.../' $file
done
What I'd do is change allFilesWithH.txt into a sed command using sed.
(When forced to use sed. I'd actually use Perl instead, it can also do the search for *.h files.)