I want to create an Virtual Output port in my app, which can be recognised by other music apps.
Example is iSymphonic, were one is able to select a VO from a list generated by MIDIFlow.
I have tried .createVirtualPorts() which does not throw errors, but at the same time does not create VO's that are visible in iSymphonic.
Related
My aim is to write an audio app for low latency realtime audio analysis on OSX. This will involve connecting to one or more USB interfaces and taking specific channels from these devices.
I started with the learning core audio book and writing this using C. As I went down this path it came to light that a lot of the old frameworks have been deprecated. It appears that the majority of what I would like to achieve can be written using AVAudioengine and connecting AVAudioUnits, digging down into core audio level only for the lower things like configuring the hardware devices.
I am confused here as to how to access two devices simultaneously. I do not want to create an aggregate device as I would like to treat the devices individually.
Using core audio I can list the audio device ID for all devices and change the default system output device here (and can do the input device using similar methods). However this only allows me one physical device, and will always track the device in system preferences.
static func setOutputDevice(newDeviceID: AudioDeviceID) {
let propertySize = UInt32(MemoryLayout<UInt32>.size)
var deviceID = newDeviceID
var propertyAddress = AudioObjectPropertyAddress(
mSelector: AudioObjectPropertySelector(kAudioHardwarePropertyDefaultOutputDevice),
mScope: AudioObjectPropertyScope(kAudioObjectPropertyScopeGlobal),
mElement: AudioObjectPropertyElement(kAudioObjectPropertyElementMaster))
AudioObjectSetPropertyData(AudioObjectID(kAudioObjectSystemObject), &propertyAddress, 0, nil, propertySize, &deviceID)
}
I then found that the kAudioUnitSubType_HALOutput is the way to go for specifying a static device only accessible through this property. I can create a component of this type using:
var outputHAL = AudioComponentDescription(componentType: kAudioUnitType_Output, componentSubType: kAudioUnitSubType_HALOutput, componentManufacturer: kAudioUnitManufacturer_Apple, componentFlags: 0, componentFlagsMask: 0)
let component = AudioComponentFindNext(nil, &outputHAL)
guard component != nil else {
print("Can't get input unit")
exit(-1)
}
However I am confused about how you create a description of this component and then find the next device that matches the description. Is there a property where I can select the audio device ID and link the AUHAL to this?
I also cannot figure out how to assign an AUHAL to an AVAudioEngine. I can create a node for the HAL but cannot attach this to the engine. Finally is it possible to create multiple kAudioUnitSubType_HALOutput components and feed these into the mixer?
I have been trying to research this for the last week, but nowhere closer to the answer. I have read up on channel mapping and everything I need to know down the line, but at this level getting the audio at. lower level seems pretty undocumented, especially when using swift.
I'm using AKSequencer's genData function to receive the MIDI in file format. I would next like to use that MIDI file that I generate to load it into a AKSequencer. Is this possible?
Yes. AudioKit's MIDIFileEditAndSync example shows both how to create a new AKSequencer from a MIDI file using loadMIDIFile() and how to add the tracks from a MIDI file to an existing AKSequencer using addMIDIFileTracks(). Of course the output of the genData method can be used to do either.
I have a Verilog code simulated and synthesized on ISE design toolkit. I've got an FPGA spartan 6 device which is to be used for the implementation. But there is a problem with the device (probably a power issue) which makes the device unavailable in any of the COM ports when I connected it to my PC. So I want to check whether my Matlab code which I made for serial communication through the device does the desired job. So I need a method to test serial communication via any of the COM ports without connecting a serial com device to the PC. Is there any such method that I can Tx Rx serial data from Matlab to COM ports? Any software or any other method would be highly appreciated :)
I found a way to test Matlab serial communication using virtual serial ports.
Download "Freeware Virtual COM Ports Emulator" from: http://freevirtualserialports.com/
I installed it in Windows 10, and it's working (as trial).
Add a pair of two serial ports:
Execute the following Matlab code sample to verify it's working:
s3 = serial('COM3','BaudRate',115200);
s4 = serial('COM4','BaudRate',115200);
fopen(s3);
fopen(s4);
fwrite(s3, uint8([1, 2, 3, 4, 5]));
%fprintf(s3, '12345');
pause(0.1);
RxBuf = fread(s4, 5)
fclose(s3);
delete(s3);
clear s3
fclose(s4);
delete(s4);
clear s4
The output is:
RxBuf =
1
2
3
4
5
Bypassing the problem "it only stays for a single test session".
There is a problem when creating a pair of virtual ports using the software, it only stays for a single test session.
I guess it's a problem with the COM port emulation software.
The following solution, is not a good practice (and not a true solution).
Declare the serial object as global, keeping the object persistent.
Create the serial object only if it's not created.
Don't delete and don't clear the serial object.
See the following code sample:
global s3 s4
if isempty(s3)
s3 = serial('COM3','BaudRate',115200);
end
if isempty(s4)
s4 = serial('COM4','BaudRate',115200);
end
fopen(s3);
fopen(s4);
fwrite(s3, uint8([1, 2, 3, 4, 5]));
pause(0.1);
RxBuf = fread(s4, 5)
fclose(s3);
%delete(s3);
%clear s3
fclose(s4);
%delete(s4);
%clear s4
You can also look for a better virtual COM port software.
As Rotem suggested, if you need to communicate via serial line between 2 program of your PC you need a virtual COM port emulator.
It seems you are running on Windows OS so I would recommend a completely free emulator (not a trial one). For Windows I use com0com Null-modem emulator (from SourceForge).
In the example below I will show how to communicate with "another" device so Matlab will not handle both side of the communication. The other device will be simulated by a simple terminal. For windows I use RealTerm: Serial/TCP Terminal (also from SourceForge).
Setup:
Execute the setup of both program with all default options. by default com0com will create a virtual pair COM3/COM4 but if these port already exist on your system the program may assign other numbers. Check the numbers before you run the example. (it will also create a CNCA0/CNCB0 pair but you can ignore this one for now).
For RealTerm, once installed (don't forget to activate the server registration at the end of the setup, it should be ticked by default though), it will look like below. Keep all default options, just set the port number and the baud rate if they need to be changed.
Test MATLAB -> Terminal
You are ready to send Ascii characters or binary values from MATLAB to your device. The animation below shows you an example of both option:
you can click on the picture to see it full size. It is running in loop so you may want to wait until it restart from the beginning.
Test Terminal -> MATLAB
Below animation shows you how to test the communication in the other way:
Don't forget to tick [CR] [LF] on RealTerm when you send Ascii characters and want to use the '%s' format specifier on MATLAB, as it needs these characters to detect the end of the string.
Note:
If you have another terminal program that you are more used too, it
will work the same.
If the RealTerm option does not suit you, or if you want to handle
both sides of communication from Matlab, then you can use the code
provided by Rotem in his first answer. Just install com0com but
ignore all the RealTerm part.
I am developing a app for iOS using Flash, and I've created a LSO using the following code:
var so:SharedObject = SharedObject.getLocal("name");
so.data.user = enternamehere.text;
var result:String = so.flush();
I'm using a input text field so that users can enter their name. The instance name is "enternamehere".
I'd like to be able to call the information stored from the input text to appear on a different scene within the file.
So, a user enters their name on scene 3, and it appears on Scene 4 and the name is stored locally.
Any way of doing this?
Thanks
I have a 2giga mpeg file of people runnig,jogging,walking etc. in it. I will use it in a image classification project but I need to segmentate the video depending on per person an per action.
for example;
there are 25 people in video which repeat these actions in order
1st person
-runs
-walks
2nd person
-runs
-walks
and goes on....
and what I want is to have 2 different mpeg file for each person
such as;
firstperson_runs.mpeg
firstperson_waves.mpeg
so I need a tool to split big file into these files. Splitting shall be due to time.
such as;
pick t1:start of action
pick t2:end of action
create a new video from big file for the interval t1 and t2
of course I will select time intervals for each video.
OS:Winxp pro
if it can be done by matlab ,can you describe it?
any help???
I imagine there are a number of tools available to do this without MATLAB, but if you really want to use MATLAB I would check out these submissions on The MathWorks File Exchange:
Gerald Dalley's videoIO Toolbox for Matlab
Micah Richert's mmread
David Foti's mpgread and mpgwrite
EDIT:
As mentioned by M456, you can also use the built-in function MMREADER for creating a multimedia reader object for your movie file (and subsequently reading selected movie frames from it with the READ method). However, I don't know which version of MATLAB this function was introduced in. It is in versions 7.7 and 7.8 (R2008b and R2009a, respectively), but it is not in version 7.1.
Matlab can do such video split operations. There are two built in functions (aviread and mmreader) for reading video files. Both will create objects which contain the individual frames of the video. You can save these as separate frames or make a new video out of by using avifile.