I am trying to customize FusionPBX. In my dashboard, I want to list the incoming, placed and missed calls. I want to show this in two columns, one for 'Personal' Calls and the other for 'Ring Group' calls. I can't find any relation between xml_cdr and ring_groups table. How do I fetch the 'Ring Group' and 'Personal' calls from the xml_cdr table?
I wrote FusionPBX and I don't have a specific way to do what you are asking except call detail records will show ring_group_uuid when the call comes from a ring group. This may help accomplish what you need.
Related
I am deleting row from a sheet, On a sheet I have daily job which needs to recognize the deleted records, I need a way to recognize them using smartsheet api or sdk..
Thanks in advance..
I don't believe this scenario (identifying deleted rows) is explicitly supported by the API at this time. Seems like you could still use the API to achieve your goal though, with a bit more work (code) on your part.
Your code would have to get the sheet data (i.e., all sheet rows) at a regular interval and save that data somewhere -- then each time job runs, get the sheet data again and compare that data to the data you saved the previous time the job ran (to identify any rows that had been deleted).
Edit 9/26: Added Webhooks info
Note that with the approach I've described above, any rows that had been added AND deleted during the interval between job runs would not be detected. If it's important to identify each and every time a row is deleted, a better (and much more efficient) approach would be to use Webhooks. By using webhooks, your application subscribes to notifications for a specified sheet, and then would receive a callback (HTTP POST) from Smartsheet any time the sheet changes. Your application would need to inspect the information in each callback it receives to identify 'deleted row' events (eventType = deleted and objectType = row).
A simple way to do this is to add a column with a checkmark named "delete" or something similar, then with automation you can move the row to another sheet when the flag is detected, the row will be removed from the original sheet, but you will have a record of the deleted row in a different sheet that you can read or do what ever you need to do, this will also prevent deletions by mistake and you can even restore the row back if you need to. I don't think you need much code to implement this solution.
I'm trying to implement a read confirmation in a number of wiki pages.
I'm trying to use trackers.
General Description:
Employees in our company are assigned to read a number of official procedures.
I'm trying to implement a process where:
Each employee is assigned procedures he needs to read according to his department (Group).
Each procedure is a wiki page
At the end of each procedure there will be a confirmation form in the following format.
Users that don't need to read this procedure won't see this form.
Users that confirmed reading the document will see a message like:
You've confirmed reading this procedure.
Administrators will be able to monitor who read what procedure.
Questions:
How do I hide the tracker plugin from users who don't belong to the department (Group)
How do I display a different message once the user confirmed the read
Thanks
There are different way to achieve this and it require a bit of thinking (trade-off from a method to another), but this is what I’ll do.
Have 2 groups (before approving - after approving)
Display the procedures using a plugin listExecute and having at the end the approving checkbox to have some actions (notification, group changes, etc).
Enclosing everything in a tracker and turn it into a multipage forms can also be the way.
Your case remind me other use case I worked on including Official Procedures reading including quick test (to check if the procedures were understood) and approving mechanism. Look at https://doc.tiki.org/PluginExercise ;)
Good luck
Bernard
https://www.facebook.com/bsfez
Another, possibly simpler (? ;) way to do that would be to use just plugins group and list, maybe like this:
{GROUP(groups="This Department")}
{LIST()}
{filter type="trackeritem"}
{filter field="tracker_id" content="42"}
{filter field="tracker_field_procedurePage" content="{{page}}"}
{filter field="tracker_field_userLogin" content="{{user}}"}
{OUTPUT()}~tc~Item found, so already done~/tc~You already did this bit{OUTPUT}
{ALTERNATE()}~tc~Nothing found, show the form~/tc~{tracker trackerId=42 etc...}{ALTERNATE}
{LIST}
{ELSE}
You don't need to fill in the form
{GROUP}
This is totally untested i'm afraid, and i'm not 100% sure you can use a plugin in the ALTERNATE section, but give it a go? If it doesn't work, try using {display format="wiki plugin" etc...} which might do the trick - good luck!
In moodle,I could see the default course progress for the courses in the moodle on the front end. But when tried to show the progress like 10% completed when chapter1 gets completed, 20% completed when chapter2 gets completed and so on. I could not find any module or could not figure out how to modify the code.
In other words:1. How to track the progress of course completion based on course subsections completion? Because default tracking based on courses based only.2. It is possible to track the courses without (refer https://i.stack.imgur.com/GUqwT.png) ticking the course completion checkbox?3. Based on the URL viewing of course sections, is it possible to track the course progress?Thanks in advance.
You can sometimes track specific page views and interactions via the mdl_logstore_standard_log table. Different modules/activities in Moodle log different types/amounts of data, but views of typical course topics/sections are usually logged regardless of completion.
For example, imagine a course with id=10 where you visit section/topic 3. The URL usually looks something like this: <yourdomain>/course/view.php?id=10§ion=3
In this case, the view should be logged in mdl_logstore_standard_log with an eventname value of \core\event\course_viewed. The course id should be in the courseid column and the section viewed should be in the "other" column, although that data is an array stored with PHP serialization, so it's helpful to use unserialize and array parsing functions to get the "3" quickly if needed.
Again, keep in mind different activities/modules log data differently - for example, an assignment activity is logged differently - but hope this helps you find what you need. Good luck!
I have a CRUD that contains 5 tables and I need to do some processing on the server side alter the last table has been updated, the events on the datasetprovider happens after each individual table.
Like, I have 3 tables, person, car, personcar. I fill the fields I click save, first it's gonna save the person, then the car and last the personcar.
How can I know, in the transaction block, the last table?
I couldn't find the right 'after' event...
there's no such built-in functionality unless you utilize nested datasets that is. you should either implement some specific remote method wrapping all required modifications or enhance midas with extra means (see for example "KT Data Components" lib to get the idea how this could be implemented)
Your transaction should be on the serverside...have a method call that passes all your datasets in one call...handles the start/commit/rollback on the server side not the client side.
I've looked all over and cannot find an answer to my question; I can't even determine whether it is possible.
Referring to the attached image, you will notice that this is a statement report with data grouping activated.
1) The report shows all the services invoiced to an account by date.
You can expand the group to see all the transactions that formed part of that service for that day. (You can for instance make use of the same service multiple times per day)
2) This is the detailed layout of the service invoiced. This list is different for each service, but mainly it will show you a summarized transaction list (PK BatchId), which has the "+" symbol next to it to enable drilldown to a detailed report of the batch.
My problem:
When loading the statement report, we are now hitting multiple tables, multiple times to produce the data to be grouped and displayed in #2 (refer to image).
We are trying to avoid this like the plague.
My Question
Is there a way to populate #2 when and only when the user clicks a "+" symbol or an "expand" image where the "+" is currently located in #1.
In other words. We dispose of the group function and populate the statement without detailed information. When the user clicks on #1, we load a sproc, populate a dataset and display the data in #2.
Any thoughts on this?
Drillthrough Reports look like a good solution here. See the link for more information on how these work. So basically you have the report without the detailed information, but when somebody clicks on 1 it opens up a new report with the details behind it.
After testing, I confirmed that subreports are executed even if they are hidden within an element that can be toggled.
So subreports won't answer this problem.
[Edited: previously I thought they could be used. JAT points out that this negative answer may have some value, so I'm leaving it.]