When I execute a Format Document command on a Vue Component.vue file VSCode replace all single quoted string with double quoted string.
In my specific case this rule conflicts with electron-vue lint configuration that require singlequote.
I don't have prettier extensions installed (no prettier.singleQuote in my setting)
How to customize VSCode to avoid this?
I dont have prettier extension installed, but after reading the possible duplicate answer I've added from scratch in my User Setting (UserSetting.json, Ctrl+, shortcut):
"prettier.singleQuote": true
A part a green warning (Unknown configuration setting) the single quotes are no more replaced.
I suspect that the prettier extension is not visible but is embedded inside the Vetur extension.
Well, like the guy (#user2982122) mentioned but instead of File go to Code -> Preferences -> Settings, then look for Quote, select Prettier and check both boxes
For projects that use .editorconfig file by default. The formatter will ignore the rules in the settings and use the rules in .editorconfig, then you can either:
Remove .editorconfig file, and use your VSCode settings.
Add quote_type = single to the .editorconfig file regarding your file type. You can also set quote_type value to double or auto.
It looks like it is a bug open for this issue: Prettier Bug
None of above solution worked for me.
The only thing that worked was, adding this line of code in package.json:
"prettier": {
"singleQuote": true
},
At the time of writing (June 2022):
please consider that .editorconfig overwrites every other configuration at the end, find the file (most probably on the root of your project), edit it and add the following:
[*]
quote_type = single
From the vuejs/vetur issue page https://github.com/vuejs/vetur/issues/986#
This solution worked for me.
In VSCodes settings.json file add this entry
"vetur.format.defaultFormatterOptions": {
"prettier": {
"singleQuote": true
}
},
Install prettier extension and paste below code in your VSCode settings.json file
"prettier.useEditorConfig": false,
"prettier.singleQuote": true
this will ignore your .editorconfig file setting.
What worked for me was setting up the .prettierrc.json config file. Put it to the root of your project with a sample config like this:
{
"singleQuote": true,
"trailingComma": "all",
"tabWidth": 2,
"semi": true,
"arrowParens": "always"
}
After triggering the Format Document command, all works just as expected.
Side note: What comes as a bonus with this solution is that each team member gets the same formatting outputs thanks to the present config file.
Correct solution :
I add .prettierrc.js file in my main root project
and write
module.exports = {
singleQuote: true
};
For newbies like me:
From the menu Nav bar at the top: Select File -> Preferences -> Settings.
In the search text box, type in Quote
In the filtered list that appears below, look for the gear icon and next to it - "Prettier". Click on check box to enable "Prettier: Single Quote"
I had the same issue in vscode. Just create a .prettierrc file in your root directory and add the following json.
For single quotes add:
{
"singleQuote": true
}
For double quotes add:
{
"singleQuote": false
}
Try one of these solutions
In vscode settings.json file add this entry
"prettier.singleQuote": true
In vscode if you have .editorconfig file, add this line under the root [*] symbol quote_type = single
In vscode if you have .prettierrc file, add this line
{
"singleQuote": true,
"vetur.format.defaultFormatterOptions": {
"prettier": {
"singleQuote": true
}
}
}
quote_type = single
add this inside .editorconfig
# EditorConfig is awesome: https://EditorConfig.org
# top-most EditorConfig file
root = true
[*]
indent_style = space
indent_size = 2
end_of_line = lf
charset = utf-8
trim_trailing_whitespace = false
insert_final_newline = false
quote_type = single
As noted by #attdona the Vetur extension includes prettier.
While you can change the prettier settings, as per the accepted answer, you can also change the formatter for specific regions of a vue component.
Here, for example, I've set Vetur to use the vscode-typescript formatter as it uses single quotes by default:
in .prettierrc add
{
"arrowParens": "avoid",
"semi": false,
"singleQuote": true
}
After struggling with the issue I found a useful tool. If you click on the Prettier word in the right lower corner you will get the Output window opened. In that window once you run formatting (in my case it is Alt + Shift + F) you will see all the configurations which prettier will use to format the document. So, we can clearly see that specifying the prettier in the prettier.singleQuote is wrong. It should just be singleQuote. Hence, having the .prettierrc file in my user root folder with the following contents produced the desired result:
{
"trailingComma": "none",
"useEditorConfig": false,
"singleQuote": true
}
Also, make sure that you have the Prettier extension installed.
I'm using typescript, for me it got resolved with checking "Tslint integration" flag under prettier settings (in vscode preferences):
There only solution that worked for me:
and only for Angular Projects:
Just go into your project ".editorconfig" file and paste 'quote_type = single'.
Hope it should work for you as well.
In my case, the problem was in the escaping \ character inside the string:
message = 'Error argument is not an object, it\'s ' + typeof error
Turning on the avoidEscape option and using double quotes for that string solved the problem:
message = "Error argument is not an object, it's " + typeof error
.eslintrc.js
module.exports = {
rules : {
// Other rules...
'quotes' : ['error', 'single', {'avoidEscape' : true}],
}
}
I added file called .prettierrc in my project folder.
File content:
{
"singleQuote": true,
"vetur.format.defaultFormatterOptions": {
"prettier": {
"singleQuote": true
}
}
}
It works for me to check single quote in Prettier as well
tslint.autoFixOnSave as true
You can use this in settings.json
"javascript.preferences.quoteStyle": "single"
Use this extension.
https://marketplace.visualstudio.com/items?itemName=BriteSnow.vscode-toggle-quotes
cmd ' (ctrl ' on win/Linux) will cycle among ' " `
For JSX use:
{"jsxSingleQuote": false}
First, install the Prettier extension. Create a .prettierrc configuration file at the root of your project. And add config like below:
{
"trailingComma": "es5",
"singleQuote": true,
"jsxSingleQuote": true,
"printWidth": 100,
"tabWidth": 2,
"semi": true,
"endOfLine": "auto"
}
Well for me both options solved the issue:
By adding inside the .prettierrc - "singleQuote": true
Or by adding following inside the package.json ->
"prettier": {
"singleQuote": true
}
Though I tried also adding .prettierrc.js and have following
module.exports = {
singleQuote: true
};
This didn't worked.
I had a lot of issues controlling linting and prettier formating. I had rules for eslint on for prettier like
"prettier/prettier": [
"error",
{ "singleQuote": true, "trailingComma": "none" }
],
and rules inside .prettierrc file
{
"tabWidth": 2
}
But my .prettierrc file was not getting processed. My fix was installing prettier as a package on dev dependency. So the solution that worked for me was installing all these packages eslint-config-prettier eslint-plugin-prettier and prettier.
This works for me :
try right click on the current document
and choose "format document with " ,
and choose your own format extension for the document.
:)
If you're using a YAML plugin, it also has a single/double quote option that was tripping me up. Cheers.
"prettier": {
"singleQuote": true
},
This line of code save my hours.
Related
I have a Problem with Visual Studio Code and Prettier. I got the following ".prettierrc"
{ "semi": false, "singleQuote": true, "arrowParens": "avoid", "bracketSpacing": false, "printWidth": 60 }
when i do know "npx prettier -w *.js" it works fine, for example it removes the Semicolon at the end of each line. But when I try to use it without the npx it doesn't work. I got the Option "format on save" activated for Prettier. But he only moves the semicolon to the end of the line and doesn't delete it.
I activated "Prettier:Require Config", Set Prettier -Code Format as default and also added "Prettier:Config Path: prettierrc" <-- Is my path maybe wrong ??
I have and error of eslint in my code that I cannot understand how turn off, these are some examples:
As you can see there is a eslint(prettier/prettier) rule that is incomprehensible and I can't understand how to turn off.
This is my eslint and prettier config:
eslint
module.exports = {
root: true,
extends: ['#react-native-community'],
parser: '#typescript-eslint/parser',
plugins: ['#typescript-eslint'],
overrides: [
{
files: ['*.ts', '*.tsx'],
rules: {
'#typescript-eslint/no-shadow': ['error'],
'no-shadow': 'off',
'no-undef': 'off',
},
},
],
};
prettier
module.exports = {
printWidth: 100,
arrowParens: 'avoid',
bracketSameLine: false,
singleQuote: true,
tabWidth: 2
};
Oh Pierro... Its you again.
Your Prettier configuration is not in sync with your ESLint configuration.
When you set Prettier's print-width rule, you need to always make sure that you set ESLint's max-len rule to the same value. This is very import, and is likely causing your issue. You seem to have some other stuff going on though.
#see this post
You need to synchronize the two. Ir looks like a JSX configuration that's causing problems. Try changing the value of bracketSameLine in your prettier configuration to true, or try getting rid of it all together.
You see where it says that the rule prettier/prettier is causing the issue? That should be in your configuration.
That's odd... You don't seem to have your .eslintrc.* file configured properly. It looks like your not properly configuring the eslint-plugin-prettier plugin for ESLint.
If you look at the plugin's documentation, which is where the prettier/prettier rule comes from (the first prettier is the name if the plugin, the second prettier is the name of the rule) it says you need to add the following values to the correct settings in your .eslintrc.* configuration file.
{
"plugins": ["prettier"],
"rules": {
"prettier/prettier": "error"
}
}
Its odd that the prettier/prettier rule shows up at all without you having added that configuration.
#see this answer here, it thoroughly explains what the prettier/prettier rule is.
The if the prettier config file is not present, the auto-formatting properties of vscode are taken as the default. the settings.json in the .vscode settings should be in sync with the linter properties. In your case you don't have prettier configured thats why the error is being thrown from prettier/prettier
I am trying to use VS code editor for creating kubernetes yaml files, by some reason, vscode is not showing auto-complete commands or space in my yaml files even though I have installed Yaml Support by Redhat extension and configured yaml.schema file as per below:
{
"yaml.schemas": {
"Kubernetes": "*.yaml"
}
}
Any help would be appreciated.
Thanks
I don't know why your config does not work. Here's mine:
{
"workbench.colorTheme": "Default Light+",
"workbench.startupEditor": "none",
"editor.cursorSurroundingLines": 5,
"window.zoomLevel": 3,
"redhat.telemetry.enabled": false,
"yaml.schemas": {
"Kubernetes": [
"deploy*.yaml"
],
},
}
This snippet works for me which currently selects deploy*.yaml files.
I added rest of settings just to show overall structure. Only yaml.schemas part matters, of course.
To access this file one should press command+shift+P (macOS), and type >user settings json in the search. To reload vscode one should press command+shift+P and then type >reload window there.
I tried to match *.yaml and it works as well.
Hopefully this answer will help some vscode newbie like me. It's not very obvious how to proceed with yaml configuration after initial install.
Fix This Problem On The Vscode Step by Step
Step 1 : install yaml plugin on the vscode
Step 2 : Edit this path vscode file>prefrences>settings>Extention>YAML
Step 3 : After Click Yaml on the right side find and edit YAML: Custom Tag Edit in setings.json
Step 4 : Append This lines in File Settings.json
"https://raw.githubusercontent.com/yannh/kubernetes-json-schema/master/v1.22.4-standalone-strict/all.json": ["/*.yaml","/*.yml"]
Step 5 : Final Reload vscode You can use Ctrl+Shift+p and search Reload Window On The Vscode
try this.
{
"yaml.schemas": {
"Kubernetes": "*.yaml"
},
"redhat.telemetry.enabled": true
}
you can try it.
"yaml.schemas": {
"http://www.schemastore.org/json/composer": ["/*"],
"kubernetes": ["/*.yaml"]
},
I have an issue where HTML file formatting in VSCode, "on-save", is different than Prettier's formatting when using the command line.
My user settings (changing these values doesn't seem to make any difference):
{
"[html]": {
"editor.formatOnSave": true
},
"prettier.eslintIntegration": false,
"html.format.enable": false
}
When I run Prettier from the command line, my HTML gets formatted like this:
prettier --write "./src/app/my-file.html"
my-file.html:
<a ng-hide="$last" href="" ng-click="doThis(thing)"
>{{ crumb.title }}</a
>
The same code when I save the file in VSCode (allowing the Prettier extension to do the formatting):
<a ng-hide="$last" href="" ng-click="doThis(thing)">{{
crumb.title
}}</a>
I know the extension is installed and working, because I see this icon in the bottom right hand side of the screen:
And, when I hover over this icon, I see a tooltip that says prettier#1.16.3, the same version I have installed on the command line prettier -v
Why am I getting different results with these 2 methods? I have not altered any settings, other than the above
I needed to create a .prettierrc file with the following contents:
{
"overrides": [
{
"files": "*.html",
"options": {
"parser": "html"
}
}
]
}
The command line was using the html parser, while VSCode was using the angular parser. This way they are both using the same parser for .html files.
I want to exclude some diretory in my project and configure vscode jshint in setting.json
{
"jslint.exclude": "C:\\Users\\Administrator\\Desktop\\tmp"
}
However a object is ecpected, so what is the key of object?
jslint.exclude maps paths (which possibly contain globs) to true or false to indicate if the path should be excluded
"jslint.exclude": {
"C:\\Users\\Administrator\\Desktop\\tmp": true,
"**\\*.es6": true
}