I am running ubuntu mate 16.04.
Wifi connection to school wifi or just regular wifi works perfectly fine.
However, connecting to mobile hotspot does not work... along with portable wifi router.
Does anybody ran into same issue? any help would help me..
Okay get this
Turns out (Presumably) raspberry pi cannot handle wireless protocol provided by Korean carriers (I use Pocket wifi from SKTelecom which is mobile router that transforms LTE signal to wifi). I tried pretty much every solutions online but in vain.
The solution was :
USB tethering.
I simply connected router to raspberry pi and it worked!
For those who are considering hotspot connection or wireless router, consider USB tethering.
All praise micro 5 pin..
Related
I have the following setup:
Ubuntu 18.04 PC connected with an ethernet cable to a raspberry pi 3+.
What I want:
I am using ssh to connect to the Pi. I would like that the Pi can get internet access through the ethernet. Meaning, that the Pi is using the internet of the PC.
It would be nice if you could help me with a guide and tell me what I have to change in order to make it work.
What I tried:
I have a static IP on my PC as well as on the Pi.
In the network manager (nm-connection-editor), I set the IPv4 method to 'Shared to other computers'.
How do I now tell the Pi to use this network?
Thanks for your help
I am new to Home Assistant and I currently have a disc image of the software installed on a Raspberry Pi 3b. I have managed to get this up and running successfully by connecting my PI to an internet connection via an ethernet cable and connecting my laptop to the same network wirelessly. The problem I am facing is that I wish to run this locally without an internet connection and simply connecting my laptop to the PI with the Ethernet cable does not seem to be working. I have tried looking around for support but I cannot seem to find much on the matter.
Home Assistant's default port is 8123 not 8023.
If there is a direct connection between your laptop and the Raspberry Pi then the chance is high that mDNS won't not work. Thus, homeassistant.local is not reachable.
Add a static IP address for your Home Assistant host and your laptop.
I wanna catch probe requests of mobile devices that are not connected to a network using monitor mode on Raspberry pi 3. I am using Raspbian OS. I used "Wifite" command but it only shows the mac addresses of access points and not of the non connected mobile device. I am a beginner in networking and Raspberry pi. Kindly guide me which commands should I use for this purpose?
You might try looking into sniff-probes.
It switches WiFi channels every two seconds and captures incoming packets using tcpdump.
how do i connect my raspberry pi to WIFI without ethernet cable. I have a wifi dongle or usb connected to my pi but the internet still doesnt work unless i connect a ethernet canble. can someone please help me out
You can setup your wi-fi via the command line, see a detailed guide on the official site:
https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md
Another option is to use the PIXEL desktop:
https://www.raspberrypi.org/documentation/configuration/wireless/pixel-desktop.md
Can I plug a cisco SPA303 ip phone directly into the ethernet port of a raspberry pi running raspbx?
I have got raspbx setup and running using a wifi dongle to connect to the router. The system works with the Cisco phone plugged into the router. However, the router is on the other-side of my house and ideally, as the raspbx is wifi, I would like to plug the phone directly into the pi and have it as one unit I can have anywhere in the house.
I have spent a painful amount of hours trying to set this up and I am sure there is a simple fix I am overlooking. Any ideas would be greatly appreciated.
Yes, you can. But you should setup static ip on phone or setup dhcpd server on RPi
Also some cisco phones have double ports(internal simpler switch inside). If so, you can connect one-by-one upto 8 phones.
There are several layers to take into consideration:
Link layer MDI/MDI-X detection of crossover/patch ethernet cable detection.
Static IP address for Raspberry Pi and a DHCP server for the IP phone
TFTP server to provisionize the IP phone
A peer in asterisk for the IP phone