Is it possible to aggregate several software modules (each having its own bitbake recipe) into one single package? (eg: a package that groups openssl+libnss+curl)
How should I write the recipe? May the PACKAGES keyword help?
I looked at packagegroup, that does not do this.
EDIT: My purpose is to create custom packages for a minimal embedded OS, not the regular rpm or deb, but squashfs based packages.
It "could" look like this my_package.bb
DESCRIPTION = "My package"
inherit packagegroup
DEPENDS_${PN}= "\
openssl \
libnss \
curl \
"
Then just include the package where you need it, e.g., my_super_package.bb
DESCRIPTION = "My super package"
inherit packagegroup
DEPENDS_${PN} = "my_package"
Please have a look at this post: https://lists.yoctoproject.org/pipermail/yocto/2014-July/020412.html
Related
I'm trying to add a library (a cmake project) to my Yocto project/image.
The package essentially consists of one static library (named hello.a) with some header files in C.
I wrote a recipe and could configure, compile, package it.
The packaging results are four files {hello-dbg, hello-dev, hello-src, hello-staticdev}.deb
So there is no hello.deb.
And that seems to be a problem preventing me to create image.
The following packages have unmet dependencies:
packagegroup-utils-extra : Depends: hello but it is not installable
E: Unable to correct problems, you have held broken packages.
When I try to add that by defining:
FILES_${PN} += "/usr/lib/hello.a"
bitbake does not allow adding static libraries to anything but staticdev -> so that does not work.
My question is then, as the title says, how to (force Yocto to) create ${PN}.deb file?
The empty packages (i.e. containing no files) are not created by default. If you want to override it, you can do it via the ALLOW_EMPTY variable for a package like this:
ALLOW_EMPTY:${PN} = "1"
You can also check the official documentation for ALLOW_EMPTY.
Just for clarification:
You can install the ${PN} package (it won't install any file on the target system).
As before, your static library will still be shipped in the ${PN}-staticdev package.
I new to Yocto so there are probably some mistakes and misunderstanding that I've had, I appreciate if you can help.
So, I want to add a new package (tar file) to my custom image.
I have followed steps and steps in manual and some online instructions. While running: "bitbake mylayer", the layer is built fine but I got this error while building the image, here is the log file:
DEBUG: Executing python function rootfs_deb_bad_recommendations
DEBUG: Python function rootfs_deb_bad_recommendations finished
DEBUG: Executing python function extend_recipe_sysroot
NOTE: Installed into sysroot: []
NOTE: Skipping as already exists in sysroot: ['depmodwrapper-cross', 'apt-native', 'dpkg-native', 'pseudo-native', 'update-rc.d-native', 'prelink-native', 'makedevs-native', 'ldconfig-native', 'opkg-util$
DEBUG: Python function extend_recipe_sysroot finished
DEBUG: Executing python function do_rootfs
NOTE: ###### Generate rootfs #######
NOTE: Installing the following packages: apt busybox copy-uefiimg-to-sda coreutils dpkg e2fsprogs-resize2fs libfontconfig1 libfreetype6 libglib-2.0-0 gptfdisk libjemalloc2 kernel-module-axi-dma-sensor ku$
ERROR: Unable to install packages.
Reading package lists...
Building dependency tree...
Reading state information...
Package mypackage is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mylayer' has no installation candidate
DEBUG: Python function do_rootfs finished
ERROR: Function failed: do_rootfs
And here is mylayer.bb:
SUMMARY = ""
LICENSE = "CLOSE"
FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
SRC_URI += "file://mypackage.tar"
Also, I have included the package in conf/local.conf:
IMAGE_INSTALL_append += " mylayer"
So beside trying to figure out how to solve this problem, I also have some questions:
I have read some example of .bb, and they mentioned about LIC_FILES_CHKSUM. The mypackage.tar.gz is a package to install a platform for the device and I don't know much about the source code, so I don't know if it is necessary to include the license? Or how to know that this package need license to install?
In some answer I found online, there is one saying that I need to include PACKAGE_CLASSES ?= "package_deb" (they want to install the .deb file), so probably in my case I will need PACKAGE_CLASSES ?= "package.tar" right? I have tried to change variable, but it still not successful.
The mypackage.tar includes some deb files. If I could not install mypackage.tar, can I instead install these .deb files? Can I put it all in mylayer.bb?
Thank you in advanced, I have tried to study much documents as I could but I get so confused and there is huge amount of information to digest.
First, before answering your questions
Let me mention some best practices advice for you:
Rename the recipe to some significant name related to you compressed package.
Naming the recipe to mylayer confuses Yocto users, because there is the term layer also.
Regarding you recipe:
There is no need for FILESEXTRAPATHS because the recipe path is added automatically to Yocto paths.
FILESEXTRAPATHS it is required for .bbappend files.
You need to override the do_install task function, it does nothing by default.
do_install is the first essential task to make sure that your sources are included in the final image.
Beside that, when specifying a compressed source file into SRC_URI, yocto automatically decompresses it.
This is mentioned here.
So, here what your recipe should look like:
SUMMARY = ""
LICENSE = "CLOSED"
# Prevent Yocto from decompressing the file
SRC_URI = "file://mypackage.tar;unpack=0"
do_install(){
# Create the opt folder into the final image, ${D} is ${WORKDIR}/image
install -d ${D}/opt
# Copy the compressed file there; You can change permissions as you want
install -m 0755 ${WORKDIR}/mypackage.tar ${D}/opt
}
# Very important to specify what you installed in (do_install)
FILES_${PN} = "/opt/*"
Now, when you run IMAGE_INSTALL_append += " mylayer" your file will be installed.
Regarding your questions:
You mentioned that your compressed file contains .deb files, I assume that no license checksum is needed. Also, I understand that you may wanted to point to SRC_URI[md5sum] or other checksums for the full package. That is also not needed for local files, it is used to check for the integrity of online sources.
PACKAGE_CLASSES as mentioned here, is used by the system to know in what type the data should be packaged. By the data I mean the data that you installed with do_install. That data get packaged for according to your PACKAGE_CLASSES variable, for example, to deb file. And that is used, along side with all other recipes packages, to build the final rootfs.
Yes, if you are installing the tar file into the image and then unpack it to install all deb files, for example, with dpkg. You can use the bin_package class to do that, now the recipe must be changed for that reason:
Decompress the tar file and provide the deb files in the local files folder.
Add all deb files to SRC_URI
Inherit the bin_package class
Specify the files to be packaged.
Your recipe should look like this:
SUMMARY = ""
LICENSE = "CLOSED"
SRC_URI = "file://deb_file1.deb \
file://deb_file2.deb"
# No need to `do_install` , it is invoked by the (bin_package) class
FILES_${PN} = ""
Important:
About FILES_${PN}, you need to add all what the deb installed into the image folder
Example, if your deb file installs this:
/usr/bin/hello
/etc/hello.cfg
Specify them:
FILES_${PN} = "/usr/bin/*"
FILES_${PN} += "/etc/*"
Use * so if other deb files install files into the same folder as others it will include all.
Please excuse my lack of knowledge and incorrect use of terminology. I
am looking to include irdadump in my build image within Yocto.
I modified the
/poky/meta/recipes-connectivity/irda-utils/irda-utils_0.9.18.bb file to
include irdadump in the list of targets to be built.
INITSCRIPT_NAME = "irattach"
INITSCRIPT_PARAMS = "defaults 20"
TARGETS ??= "irattach irdaping irdadump"
do_compile () {
for t in ${TARGETS}; do
oe_runmake -C $t
done
}
However the bitbake process fails which comes down to the dependency of
pkg-config and glib 2.0 required for idradump.
I did a quick search online and noticed that there was a separate .bb
file for irdadump:
http://cgit.openembedded.org/openembedded/plain/recipes/irda-utils/
I tried to replicate this however was still faced with compiling issues.
Could anyone give me a helping hand on including irdadump to my
irda-utils package?
Thank you
To add irda-utils to your build image, just add IMAGE_INSTALL_append in your conf/local.conf file.Next time when you will run Bitbake,it will include irda-utlis package in your build image.
IMAGE_INSTALL_append = " irda-utils"
I have created a Yocto autotools project in Eclipse (based on a Hello World project).
I wanted to separate my code into a number of libs and then link them in a form of static libs (.a) to my project.
Now I have one app and a number of static libs. However, no matter what I try I can't get my code to compile. Each separate lib compiles and produces a .a file, but my app doesn't.
After searching the web I have a possible solution - add a direct link to my static libs:
MyApp_CPPFLAGS="-I$LOCATION"
MyApp_LDADD="/home/xxx/workspace/MyApp/Encoding2/Debug/libEncoding2.a"
This is my Makefile.am file, where libEncoding2.a exist in that path.
The error I get is:
make[2]: *** No rule to make target `"/home/xxx/workspace/MyApp/Encoding2/Debug/libEncoding2.a"', needed by `MyApp'. Stop.
I already built the lib so I am not sure why a make try is even needed.
Any help will be appreciated.
Because you use static library in your recipes, you can make a soft link to the library in your project source folder, i.e., hello-world-0.1, using following command to link to your static library
ln -s /home/xxx/workspace/MyApp/Encoding2/Debug/libEncoding2.a
and then edit your bb file, hello-world_0.1.bb, adding the source path to your URL
SRC_URI = " \
file://libEncoding2.a \
file://hello-world.c \
"
and in the do_compile block, using follow command to compile your project
do_compile() {
${CC} hello-world.c libEncoding.a -o hello-world
}
do_install() {
install -d ${D}${bindir}/Hello
install -m 0755 enet ${D}${bindir}/Hello
}
After you bitbake your project
bitbake hello-world
and run mkefidisk.sh, you can find the hello-world in /usr/bin/Hello/hello-world. Hope this hint can help you.
BTW, I am not familiar with autotools, I just use make to bitbake the recipes. And your static library should also be created in Yocto not in Eclipse I think. So I think your path for the static library maybe not correct, it should locate in ~/yocto/build/tmp/... or some where like this. In my case, it was located in ln -s ~/yocto/build/tmp/sysroots/intel-corei7-64/usr/lib/libEncoding.a depends on your target environment.
Depending on whether you're using libtool or not, you should have either a noinst_LTLIBRARIES or noinst_LIBRARIES list of targets, respectively. This should only include the name of your library (libEncoding2.la or libEncoding2.a.)
You should never use a full path for this, and you should not quote Make variables, so what you were looking for is
MyApp_CPPFLAGS = -I$LOCATION
MyApp_LDADD = libEncoding2.la # or .a
And that would work.
But on the other hand it seems like you should take some time to understand how autotools work, as it might not be what you're looking for. With a grain of salt you can take my Autotools Mythbuster as a starting point.
I'm having a lot of trouble wrapping my head around how Solaris 11 does packaging. I understand that there is a yum type packaging approach, but I would expect there to be a rpm -i and rpm -U approach that allows a package to be delivered and then installed or upgrade.
For now I have tracked down how to make a package, ie pkgmk and pkgtrans. Given this I can create a "foo_1.0.pkg" file that can be installed like this:
pkgadd -d foo_1.0.pkg
However I can not figure out how to upgrade this package with "foo_2.0.pkg":
root#hostname # pkgadd -d foo_2.0.pkg
The following packages are available:
1 foo foo
(x86) private_build
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: all
Processing package instance <foo> from </root/foo_2.0.pkg>
foo(x86) private_build
Current administration requires that a unique instance of the <foo>
package be created. However, the maximum number of instances of the
package which may be supported at one time on the same system has
already been met.
No changes were made to the system.
What am I doing wrong? It would appear that i should use pkg update, but this seems to imply that I need to release my pkg in a repo.
First, you aren't using Solaris 11 packaging (IPS) but the legacy SVR4 packaging.
With the latter, you cannot upgrade a custom package. The only way is then simply to remove the old package and install the newer one, which is what rpm -U is doing under the hood anyway.
pkgrm foo
pkgadd -d foo_2.0.pkg foo
I had the same problem, but I was able to workaround it by passing a config file into the cmd. This is especially useful in a script when used with the "echo |" as it bypasses the confirmation prompt as well. The config file overwrites the default install properties which are located in a file here: /var/sadm/install/admin/default. The key is the instance=overwrite line. I changed some of the others as well, to avoid any other prompts that may come up. As an alternate solution you can change the default file directly and not have to reference the additional config file.
with myprog1.0 (or 2.0) already installed run the following command.
echo | pkgadd -a /opt/myprog/install.conf -d myprog2.0
contents of /opt/myprog/install.conf file:
mail=
instance=overwrite
partial=nocheck
runlevel=nocheck
idepend=nocheck
rdepend=nocheck
space=ask
setuid=ask
conflict=nocheck
action=nocheck
networktimeout=60
networkretries=3
authentication=quit
keystore=/var/sadm/security
proxy=
$UPDATE
This variable does not exist under most installation environments. If it does exist (with the value yes), it means that a PKG with the same name, version and architecture is already installed on the system or that the installing PKG will overwrite an installed PKG. The original BASEDIR is then used.
So, this variable you can use in preinstall or postinstall script for any updation.