I am trying to use the libreoffice formula editor to add some formulae to drawings in libreoffice draw.
However, whenever I want to enter a formula that LO thinks is wrong it places an ugly upside-down question mark or a box with nothing in it.
MWE:
%sigma^+
I want to denote the light polarization to be right-circular polarized, hence there should be nothing behind the + sign. However, LO decides a + sign should be followed by something and adds in an ugly placeholder.
In LATEX I would write
\sigma^+
and be done.
How do I get rid of the placeholder?
You should type it with double quotes, that is
%sigma^"+".
Related
I'm on Win10, using Acrobat Pro DC 2021.011... to edit and Reader DC (same version) to test.
From experience and from reading forums etc, forms in these apps are maddening... but I have not been able to find any discussion (or solutions) to the following behavior...
The form I'm building for other employees' use has a large edit text box set to Multi-line and Allow Rich Text Formatting. It is set to a default font, Calibri and size 50pt. For most situations this will work for them; provides 2-3 lines for a short product description. But occasionally they want a smaller font and more lines... They know how to get the ctrl+e properties bar. But in my testing of this alternative situation they'll need sometimes, I'm finding it's impossible to get the smaller font size and more lines to work. Here's my process.
tab into text box. Ctrl+E for properties bar.
before typing I set the font size to 24
then I type in my 4 lines of text
then I tab to my next form field...
and kaboom... the field I just filled...it's line height is so large it's pushed some of the content invisible. I assume this is coming from the field's default font size, 50
And if I try to adjust the line height, by selecting all the text and then choosing in More...>Form Field Text Properties>Paragraph>Line Spacing
If I set it to Single and click Close/click into another field I get the very large leading (presumably for 50pt font (same as pic above after point 5)
If I choose Exactly and set to point size slightly larger, click Close/out of field, I get another ridiculous result where the 2/3 line have the height I set, but the space between the 1 & 2 second line is way too much and the space between the last line and 3rd line is way too small...
before tabbing or clicking out of field to another field
Good lord.. what is that! 3 different leading values in the same field; just after applying 1 value to all lines, all text in the field...
It makes no sense... it doesn't look like it regards your input at all, and just comes up with it's own random leading... I've fiddled with Space before/after and combinations of Line Height and nothing comes close to what we need... At this point I'm convinced the Acrobat tools for a stylizing text in a multi-line, allow formatting text field are useless. I'd be better off with my employees they can't format anything, ever. Just type one line and hit Tab or Enter...
What is going on! I'm trying to make a simple fillable form for other employees to use, but this kind of behavior makes that impossible (It's enough of a stretch to teach them to use the ctrl+E and do some styling of their text but this is bonkers and completely unteachable... there's not rhyme or pattern to teach!)
Hope someone can help or has seen this behavior too.
So I am having a problem. This is what I can create on one of my laptop:
On another, when I created something that has {TC} in it, the whole field code disappeared.
For the example above, if on the other computer, both are running Office 2010,
I can input the code to create the table of content from:
{TOC \f \h \z \f 1\t "Heading 1,1,Heading 2,2,Heading 3,3,Title,1}
to
{TC}
The moment I type in TC, the whole {} disappears.
Other field codes work just fine, except for {TC}. So my question is how do I get {TC} to show on my other laptop?
Thank you for your time.
Apparently, I found my answer.
When I searched google for my answer, most sites give this as a solution:
For Word 2010, go to File->Options->Advanced
Under Show document contents: Select "Show field code instead of their values"
This is the equivalent of pressing Alt+F9, which DID NOT solve my problem.
Apparently, the solution to get {TC} to show in your document is in:
go to File->Options->Display
and check to always show HIDDEN TEXT.
I hope this helps someone in the future.
Yeah, the disappearing TC code is annoying at first -- seems like it's broken. Other codes work, but why does that disappear, even if entering manually? Word instantly sets TC code to Hidden, even the field code itself.
To temporarily toggle this visible without permanently changing your display to show Hidden Text, you can use the normal Ctrl-Shift-8, which toggles display of spaces, paragraph marks, tabs, and Hidden Text, on and off. This is a good keyboard shortcut to have in your standard back of tricks anyway. It is frequent in Word that you need to toggle paragraph marks on and off, because paragraph formatting is attached to the Paragraph mark, and when they're hidden, it can be tricky to fix various formatting issues.
The original post was a few years ago, but I fear things have gotten worse since then, not better. I am using Word 365 v2201, which should be up to date. The other day, I wasted hours on trying to resolve this issue with TC field codes.
First I tried entering them using Insert > Quick Parts > Field. Word creates what looks like a field code, but it behaves as normal text. Messing around with the various controls to toggle field display and hidden text etc etc, has absolutely no effect. It is basically a faux field. And of course, it is completely ignored when compiling the TOC.
Next, I tried entering it manually, by using Ctrl + F9 to either create a blank field or convert some existing text into a field. Same result as above.
As with the original post, this seems to afflict only the TC field code. Other codes work fine, including TOC. And if I create a TOC field, then edit the code to TC, it immediately loses its properties as a field. If I then put the O back in, it immediately behaves as a field once again. Unlike in the original post, adjusting the settings for field display and/or hidden text, have no impact.
In the end, the only solution was to create the field using Alt + Shift + o to open the Mark Table of Contents Entry dialog box. And finally, this works!
I want to use the Search and Replace dialogue in Rubymine, or something similar to replace something like "Scenario:" with "#Desktop\nScenario"
I'm trying to replace every instance of Scenario: in a large Cucumber test suite with
#desktop
Scenario:
Any best ways to do this?
Update:
Thanks to #ryan2johnson9 comment, I realise there's now an easier option (tested on 2017.3).
By clicking on the "New Line" (or using the shortcut Ctrl+Shift+Enter / Alt+Enter), the input becomes multilines.
Original Answer
In the search and replace box, if you tick the "Regex" option you can do:
Search: "Scenario:"
Replace by: "#desktop\nScenario:"
The only trick is to tick the "Regex" option :)
Rubymine has macros (http://www.jetbrains.com/ruby/webhelp/binding-macros-with-keyboard-shortcuts.html) but I dont think they are powerful enough for this example.
It's possible that you could solve it with some elaborate feature hidden inside Rubymine, but I think it would be a lot easier to do this with a tool like perl/sed from the Terminal. If you are using Windows I assume you could search the net and find a text search/replace tool that fits your need.
In OSX I there are a bunch of Text Substitutions app too.
I would go that route since Rubymines macro tool isnt up to the task.
Here's a cheap and sleazy alternative:
Copy a newline character from between two empty lines in the file being edited. Temporarily add two empty lines if you don't have any.
Set up search/replace and enter the string you want to replace into the search text input box.
Paste the newline you just copied into the replacement text box plus whatever other text you want. You will be able to see the height of the replacement text input box grow vertically by one line due to the newline.
Perform the search/replace.
For this, the use of the Rubymine regex is optional.
I'm trying to show some text on top of a plot. Using
text(13,15200,('~ 12h'),'HorizontalAlignment','right','VerticalAlignment','middle','FontSize',10,'FontAngle','italic');
I can create the text box how I want it. But a thing I didn't manage to do is to create a carriage return within that text object. Already tried to add '\r' or '\n' but the only thing I get is the display of '\r' or '\n' with out breaking the line. Any ideas?
And i now that text object are used to put text WITHIN axes. But I am still trying to find a way to put some text outside the grap. Searching stackoverflow I found this Post about using UICONTROL. It works great but when I export to EPS the text seems to be in pixel format and NOT vector - so it looks really bad. Is there another way besides using uicontrol??
Thanks a lot for help!
In text that is not interpreted, you can specify line breaks using the carriage return character, which has the ascii code 10.
text(x,y,sprintf('break after this%snew line here',char(10)));
To allow text outside axes, you need to turn off clipping for the text object
text(x,y,.....,'clipping','off')
Is there a quick and easy way to word wrap like "Apply Word Wrap" function of KDE's Kate?
Enter to wrapping mode = M-x auto-fill-mode
Wrap text = select text -> M-q
While the mishadoff's answer is great for default word wrapping, I once had to re-implement it because I wasn't content with the way Emacs did it, so I tried to scratch the bits of it together and here it is: http://pastebin.com/75q65hRf in case you need it.
With that bit of code you can configure what characters to wrap on, what characters terminate words, and also set exception rules for when the characters that would've otherwise break the line won't do it. It may also pad the created column on the right and on the left (I was using this function to format and display documentation text).