I am trying to start a Zookeper instance and i keep getting an error that says the zookeeper.properties file does not exist..when in fact it does.
$ ./script.sh [2019-06-30 07:40:00,844] INFO Reading configuration
from: .\config\zookepeer.properties
(org.apache.zookeeper.server.quorum.QuorumPeerConfig) [2019-06-30
07:40:00,844] ERROR Invalid config, exiting abnormally
(org.apache.zookeeper.server.quorum.QuorumPeerMain)
org.apache.zookeeper.server.quorum.QuorumPeerConfig$ConfigException:
Error processing ./config/zookepeer.properties
at org.apache.zookeeper.server.quorum.QuorumPeerConfig.parse(QuorumPeerConfig.java:156)
at org.apache.zookeeper.server.quorum.QuorumPeerMain.initializeAndRun(QuorumPeerMain.java:104)
at org.apache.zookeeper.server.quorum.QuorumPeerMain.main(QuorumPeerMain.java:81)
Caused by: java.lang.IllegalArgumentException:
.\config\zookepeer.properties file is missing
at org.apache.zookeeper.server.quorum.QuorumPeerConfig.parse(QuorumPeerConfig.java:140)
... 2 more Invalid config, exiting abnormally
Folder structure
-root
-config
-zookeeper.properties
-bin
-zookeeper-server-start.sh
-script.sh
Script
./bin/zookeeper-server-start.sh ./config/zookepeer.properties
Zookeeper.properties
dataDir=/tmp/zookeeper
# the port at which the clients will connect
clientPort=2181
# disable the per-ip limit on the number of connections since this is a non-production config
maxClientCnxns=0
Please check the properties file name in script.
./bin/zookeeper-server-start.sh ./config/zookepeer.properties .
Change it as,
./bin/zookeeper-server-start.sh ./config/zookeeper.properties
and check.
Try this
./zookeeper-server-start.sh ../config/zookeeper.properties
Whereby you are located in the bin directory.
Getting this error when i ran ./byfn.sh -m up command : OCI runtime exec failed: exec failed: container_linux.go:348: starting container process caused "exec: \"scripts/script.sh\": stat scripts/script.sh: no such file or directory
You’re missing part of the byfn.sh script. Have you cloned the Hyperledger examples? There should be a directory called scripts containing script.sh and utils.sh. Byfn is dependent on both scripts
I was trying to run this command
#mongod --fork --logpath /var/log/mongod.log
but I got this message
about to fork child process, waiting until server is ready for connections.
forked process: 10750
all output going to: /var/log/mongod.log
log file [/var/log/mongod.log] exists; copied to temporary file
[/var/log/mongod.log.2017-05-23T14-57-31]
ERROR: child process failed, exited with error number 4
Could you please help me resolve the problem?
Per the MongoDB docs:
4
The version of the database is different from the version supported by the mongod (or mongod.exe) instance. The instance exits cleanly.
I am new to Zookeeper and it has being a real issue to install it and run. I am not sure what is wrong in here but I will explain what I've being doing to make it more clear:
1.- I've followed the installation guide provided by Apache. This means download the Zookeeper distribution (stable release) extracted the file and moved into the home directory.
2.- As I am using Ubuntu 12.04 I've modified the .bashrc file including this:
export ZOOKEEPER_INSTALL=/home/myusername/zookeeper-3.4.5
export PATH=$PATH:$ZOOKEEPER_INSTALL/bin
3.- Create a config file on conf/zoo.cfg
tickTime=2000
dataDir=/var/zookeeper
clientPort=2181
and also tried with:
dataDir=/var/log/zookeeper
and
dataDir=/var/bin/zookeeper
4.- When running the start command
zkServer.sh start or `bin/zkServer.sh start` nothing happens and always returns this
JMX enabled by default
Using config: /home/sasuke/zookeeper-3.4.5/bin/../conf/zoo.cfg
mkdir: cannot create directory `/var/zookeeper': Permission denied
Starting zookeeper ... /home/sasuke/zookeeper-3.4.5/bin/zkServer.sh: line 113: /var/zookeeper/zookeeper_server.pid: No such file or directory
FAILED TO WRITE PID
I have Java installed and inside the zookeper directory there is a zookeeper.jar file that I think it's not running.
Checking here on stackoverflow there was a guy that said he could run zookeeper after typing
ssh localhost
But when I try to do it I get this error
ssh: connect to host localhost port 22: Connection refused
Please help. I've being here trying to solve it for too long.
Getting started guide of zookeeper:
http://zookeeper.apache.org/doc/r3.1.2/zookeeperStarted.html
Previous case solved with the shh localhost
Zookeeper: FAILED TO WRITE PID
UPDATE:
The permissions for log are:
drwxr-xr-x 19 root root 4096 Oct 10 07:52 log
and for zookeeper:
drwxr-xr-x 2 zookeeper zookeeper 4096 Mar 23 2012 zookeeper
Should I change any of these?
I have had the same problem. In my case was useful to start Zookeeper and directly specify a configuration file:
/bin/zkServer.sh start conf/zoo.conf
It seems you do not have the required permissions. The /var/log owner is is going to be root. Zookeeper stores the process id and snapshot of data in that directory. The process id of the spawned zookeeper server is stored in a file -zookeeper_server.pid (as of 3.3.6)
If you have root previleges, you could start zookeeper with sudo (root) previleges, it should work but definitely not recommended. Make sure you start zookeeper with the same(or higher) permissions as the owner of the directory.
Create a new directory in your home folder like /home/username/zookeeper-data.
Let dataDir point to that directory and it should work.
The default zookeeper installation (tar extract) comes with the conf file named conf/zoo_sample.cfg while the same extract's bin/zkServer.sh expects the conf file to be called zoo.cfg thereby resulting in a "No such file or dir" and the "failed to write pid" error. So before running zkServer.sh to start or stop zookeeper instance, either:
rename the zoo_sample.cfg in the conf dir to zoo.cfg, or
give the name (and path) to the conf file (as suggested by Ilya Lapitan), or, of course
edit zkServer.sh ;-)
When you create the Directory for dataDir make sure to use the -p option. This will allow subsequent directories to be created as required by the application placing files.
mkdir -p /var/log/zookeeperData
Then set:
dataDir=/var/log/zookeeperData
Seems there's all kinds of reasons this can happen. So many helpful answers here!
For me, I had improper line endings in my zoo.cfg file, and possibly invisible characters, so zookeeper was trying to create directories like /var/zookeeper? and /var/zookeeper\r. Reworking my zoo.cfg a bit fixed it for me, along with deleting zoo_sample.conf.
This happens to me due to low disk space. cause zookeeper cant create pid file inside zookeeper data folder.
I have faced the same issue while starting the zookeeper with this command:
hadoop#ubuntu:~/hadoop/zookeeper/zookeeper-3.4.8$ bin/zkServer.sh
start
ERROR [main] client.ConnectionManager$HConnectionImplementation:
The node /hbase is not in ZooKeeper.
It should have been written by the master. Check the value configured in zookeeper.znode.parent. There could be a mismatch with the one configured in the master.
But running the script as su rectified the issue:
hadoop#ubuntu:~/hadoop/zookeeper/zookeeper-3.4.8$ sudo bin/zkServer.sh
start
ZooKeeper JMX enabled by default Using config:
/home/hadoop/hadoop/zookeeper/zookeeper-3.4.8/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
Go to /usr/local/etc/
You will find zookeeper directory
delete the directory
and restart the server - zkServer start
Change the path give dataDir=/tmp/zookeeper. If it works then its clearly access issues
But its generally not advisable to use tmp directory.
This seems to be an ownership issue; running the following solved this for me.
$ sudo chown -R $USER /var/lib/zookeeper
N.B.
I've outlined my steps below which show the error I was getting (the same as the error in this SO question) and the attempt at trying the solution proposed by a user above, which advised to provide zoo.cfg as an argument.
13:01:29 ✔ ~ :: $ZK/bin/zkServer.sh start
ZooKeeper JMX enabled by default
Using config: /usr/local/Cellar/zookeeper/3.4.14/libexec/bin/../conf/zoo.cfg
Starting zookeeper ... /usr/local/Cellar/zookeeper/3.4.14/libexec/bin/zkServer.sh: line 149: /var/lib/zookeeper/zookeeper_server.pid: Permission denied
FAILED TO WRITE PID
13:01:32 ✘ ~ :: $ZK/bin/zkServer.sh start $ZK/conf/zoo.cfg
ZooKeeper JMX enabled by default
Using config: /usr/local/Cellar/zookeeper/3.4.14/libexec/conf/zoo.cfg
Starting zookeeper ... /usr/local/Cellar/zookeeper/3.4.14/libexec/bin/zkServer.sh: line 149: /var/lib/zookeeper/zookeeper_server.pid: Permission denied
FAILED TO WRITE PID
13:04:45 ✔ /var/lib :: ls -la
total 0
drwxr-xr-x 4 root wheel 128 Apr 19 18:55 .
drwxr-xr-x 27 root wheel 864 Apr 19 18:55 ..
drwxr--r-- 3 root wheel 96 Mar 24 15:07 zookeeper
13:04:48 ✔ /var/lib :: echo $USER
tallamjr
13:06:03 ✔ /var/lib :: sudo chown -R $USER zookeeper
Password:
13:06:44 ✔ /var/lib :: ls -la
total 0
drwxr-xr-x 4 root wheel 128 Apr 19 18:55 .
drwxr-xr-x 27 root wheel 864 Apr 19 18:55 ..
drwxr--r-- 3 tallamjr wheel 96 Mar 24 15:07 zookeeper
13:06:48 ✔ ~ :: $ZK/bin/zkServer.sh start
ZooKeeper JMX enabled by default
Using config: /usr/local/Cellar/zookeeper/3.4.14/libexec/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
REF:
- https://askubuntu.com/questions/6723/change-folder-permissions-and-ownership
For me this solution worked:
I granted the read, write and execute permissions for everyone using the command $sudo chmod 777 foldername for the directory zookeeper by going inside the directory /var (/var/zookeeper).
After executing this command try running the zookeeper. It ran in my case
try to use sudo -E bin/zkServer.sh start
I have supervisord installed on my Ubuntu 10.04 and it runs a Java process continuously and supposed to heal (reload) process when it somehow dies or crashes.
On my htop I send SIGKILL, SIGTERM, SIGHUP, SIGSEGV signals to that Java process and watch /etc/logs/supervisord.log file and it says.
08:09:46,182 INFO success: myprogram entered RUNNING state,[...]
08:38:10,043 INFO exited: myprogram (exit status 0; expected)
At 08:38 I kill the process with SIGSEGV. How come it is exited with code 0 and why does not supervisord restart it at all?
All my supervisord.conf about this specific program is as follows:
[program:play-9000]
command=play run /var/www/myprogram/ --%%prod
stderr_logfile = /var/log/supervisord/myprogram-stderr.log
stdout_logfile = /var/log/supervisord/myprogram-stdout.log
Process works really fine when I launch supervisord, however does not get healed.
By the way any ideas how to start supervisord as a service so that it automatically launches when the whole system reboots?
Try setting autorestart=true. By default, autorestart is set to "unexpected" which means it will only restart a process if it exits with an unexpected exit code. By default, exit code 0 is expected.
http://supervisord.org/configuration.html#program-x-section-settings
You can use the chkconfig program to make sure that supervisor starts on reboot.
$ sudo apt-get install chkconfig
$ chkconfig -l supervisor
supervisor 0:off 1:off 2:on 3:on 4:on 5:on 6:off
You can see that it's enabled for runlevels 2-5 by default when I installed it.
$ man 7 runlevel
for more info on run levels.