I installed a 5 inch raspberry pi touch screen driver and it work well. Now I need to disable the screen and use the spi in an RFID code.
I need a method to disable the screen and clear the gpio pins.
I tried to use
disable_touchscreen=1
but nothing happens.
Then I tried
Xinput and disable the screen, the touch stopped but the pins didn't cleared .
Related
I am using npyscreen on a Raspberry Pi 4. The RPi has a touch screen.
When using the standard npyscreen forms, the OK/Cancel buttons respond to the keyboard keys (tab/enter) but don't respond to touch (I didn't try with a mouse)
Is there a way to make 'touch' work on the Raspberry Pi? Maybe a couple of configuration settings on the RPi itself?
lcd and fan use the same pin, how can i use two devices at the same time?
It isn't necessary to use 2 devices on Pi's pin 6(Ground). There is 7 more Ground pins. Just connect black wire to of other pins.
In the image yellow mark is the conflict pin and the red cicles are alternatives.
I am trying to view a video via CVLC on a raspberry pi zero by using this command...
cvlc --no-osd --video-filter=adjust --brightness=2.0 /mnt/flash-drive/16-16-05.mp4
The video plays without any issues when i leave out the "--video-filter=adjust --brightness=2.0" section.
But when i add that section VLC does not show the video.
I looked around on the web on how to adjust image settings like brightness and contrast from command line and that seems to be the way , i just don't understand why it doesn't work on the raspberry pi zero.
Any idea why that doesn't work ?
EDIT :
This function is not supported on the raspberry pi because of its hardware acceleration.
This function is not supported on the raspberry pi because of its hardware acceleration.
VLC BUG REPORT WEBSITE
I have a smart home (node-red) with a Raspberry Pi and a official 7" touchscreen as dashboard.
I now want to turn off the backlight after a certain time and I know how to do that. I also want to turn it back on if I touch the screen at any place.
I have no idea how to do that, as there is no node-red node for touch input or something like that.
Anyone did this before?
I added usb touch screen driver to my custom win ce 6.0 OS image. The touch screen works only when there is another USB device(USB flash drive, usb mouse etc.) present in the system and does not work when there is only single usb touch screen is connected. After troubleshooting, I discovered that the USB touch device does not get enumerated. Any help resolving this issue is highly appreciated.