Goal: I have an Angular 5 client that I wish to centralise logging to AWS CloudWatch so that I can view all logs (from the web client, API, lambdas, DynamoDB) in one place.
Solution considered:
(1) Create an API on the AWS Api Gateway with the CloudWatch Logs (AWS Service)
(2) Angular 5 client will post all logging to this API.
Problem:
I am having difficulty configuring the AWS Api Gateway correctly. The documentation on this is particularly sparse. I have created a simple test API with the following configuration.
Basic API configuration
This is a POST method on the API. The TestAPIRole has permission to PutEventLogs to CloudWatch.
I ran a test with the following data:
Test message
And I get the following response:
Response from test message
I think I haven't configure the API right but I am not sure what else to try. Has anyone tried to configure AWS API Gateway to post log events to Cloudwatch?
Has anyone tried to configure AWS API Gateway to post log events to Cloudwatch?
We have an error-logger API (API Gateway + Lambda) we use at work. At the minimum, it's just a simple POST endpoint that receives what the frontend (ours is in React) error handler sends. The Lambda simply writes to CloudWatch and we aggregate them through ElasticSearch.
Related
I am working on creating a new request in AWS API Gateway. I am having issues with a 404 not found on the URL request.
The request (had to create fake one for the question):
GET https://hello.stackoverflow.com/services/misc/myroute/v1/swagger.json
I created a route in API Gateway ANY /services/misc/myroute/{proxy+}
I attached the route to a Load Balancer Listener integration
I set up the listener rule in the Load Balancer:
IF Path is /services/misc* Then Forward to Target
IF Requests otherwise not routed Then Forward to Default
Created logs for this system in the AWS API Gateway: Monitor -> Logging -> Set Log Destination
Set variables for the log format using the $context variables, Context Variables
Ex Log:
{ "requestId":"QWRHQKWFHWAFZ=",
"routeKey":"ANY /services/misc/myroute/{proxy+}",
"path":"/services/misc/myroute/v1/swagger.json",
"domain":"hello.stackoverflow.com",
"domain_prefix":"hello",
"httpMethod":"GET", "status":"404","protocol":"HTTP/1.1", "endpoint":-" }
One final check I have done to make sure its completing its "route" was see the requests in the monitoring and seeing the 4xx come from this ALB listener.
I can send the request via localhost and get a response with the json body
GET https://localhost:8080/v1/swagger.json --> Status 200 OK with body filled
In my quest to solve the issue, it has lead me to many older (2019) stack overflow questions that seem to be outdated with the AWS Console, same with the AWS documentation. See links below...
AWS API Gateway Method request path parameter not working
AWS API Gateway 404 page not found error when invoking endpoint url
AWS API Gateway Method request path parameter not working
With this being my first project in the AWS cloud space, I am not sure where else to turn. My guess would be the authentication headers from the API Gateway are being lost, but not sure where I can see this loss happening.
From my understanding of how the AWS Request Flow goes, I created this diagram:
In my current situation I have been able to create 3 elements:
A batch queue
A batch job description
An API gateway
My goal is to call the "Submit Job" functionality from the API gateway POST action (I'm using a REST Gateway). I have been able to setup the API gateway and it's role in IAM. I found nearly all the settings except for the action or path override. Just using SubmitJob provides me with forbidden errors. For a lambda function I found the path override I should use by example.
My question:
When calling AWS Batch job to submit a job from the API Gateway, which values should I use in the "Path override" under "Integration request"?
In AWS, I don't you can associate an API Gateway with a Batch job directly. Instead, you have to set up a lambda function that is triggered by the API Gateway POST data, and this function submit's a job to your AWS batch function.
The steps for doing this are here: api gateway integration with aws batch
And I've done this. One Lambda function can serve for multiple endpoints of your API, and you can use it to route data to batch functions and queue them up.
I am very new to WSO2 API manager and trying out my very first simple restful api. which returns json response and has no security since it is an internal api.
I installed WSO2 API manager locally and trying to call the rest api on my dev server which uses http and no security as I mentioned earlier.
Here is how my get url looks like:
and here is my url looks like for production and sandbox environment:
I don't have any message mediation enabled.
I went to the API store and created a trial application (so that I can get the access token. Eventhough, my dev environment api has no security, I was reading that for throttling and other purpose, I need to pass bearer token to the WSO2 api OR it will reject the request.)
When I am trying to consume the api, I get the following binary message.
Is there any way I can see the proxy log on WSO2 server so that I can see the request and its header sent to my dev server?
How can I fix this binary response to get the proper json response?
I searched all over and can't find solution to it.
You can use below steps on WSO2 ESB or APIM to enable Wire Logs.
Uncomment below line in /repository/conf/log4j.properties
log4j.logger.org.apache.synapse.transport.http.wire=DEBUG
Restart Server.
Source - http://lakshanigamage.blogspot.com/2015/03/how-to-enable-wire-logs-in-wso2-esbapim.html
Is there a way to get IBM Cloud Compose for RabbitMQ logs using web interface or cli?
There is Syslog-NG for RabbitMQ and it has other cloud logging services namely papertrail and Loggly providing the webinterface along with two IBM Cloud Compose API calls for logs
Get list of available logfiles
GET /2016-07/deployments/:id/logfiles
Get details of a logfile including download link
GET /2016-07/deployments/:id/logfiles/:logfile_id
To make use of the API, you will need a handful of digital assets; a token for your account to access the IBM Cloud API and a foundation endpoint for your queries. Check this link for details on how to get the token, endpoint and example cURL calls
I'm building a CloudFoundry application in Bluemix using the API Management service. For this I'm following this tutorial http://www.ibm.com/developerworks/cloud/library/cl-bluemix-api-mgmt-app/index.html.
I can successfully create an API Plan for a custom REST API application (running on a Liberty server on Bluemix as well) and it is published.
I can also create a service in my Bluemix dashboard using the new Custom API, which I take as the API plan was successfully deployed on Bluemix.
Whenever I try to bind this new service I get the following message:
BXNUI2055E: Unable to connect to Cloud Foundry because of the
following exception: "Read timed out." If the problem persists, see
the Troubleshooting topics in the IBM Bluemix Documentation to check
service status, review troubleshooting information, or for information
about getting help.
From time to time I also get this message
The service broker returned an invalid response for the request to
https://apimasv1-stage.stage1.mybluemix.net/d118dceb-edbf-4a7f-9bab-d44371b0c9f9/privateservices/v2/service_instances/1a60830c-0796-4105-afb4-e3477424acf9/service_bindings/ebb853dc-ec88-4987-b8f2-e9acd38d1741.
Status Code: 502 Bad Gateway, Body: 502 Bad Gateway: Registered
endpoint failed to handle the request.
Also, I can open the API portal and see the services listed in there. However, whenever I try to test the service, I get the following error
A security error has occurred. If using a self-signed certificate on
your gateway, you will need to accept it in your browser, which you
can do by clicking the following link.
https://api.wawona.apim.ibmcloud.com/victorshmx1ibmcom-dev/sb/LibraryREST/rs/authors/1
Also, below in the response I get this message:
NetworkError: Failed to execute 'send' on 'XMLHttpRequest': Failed to
load
'https://api.wawona.apim.ibmcloud.com/victorshmx1ibmcom-dev/sb/LibraryREST/rs/authors/1'.
I must clarify this service (the liberty app) doesn't have any security constraint to access the REST service nor I added some kind of security in the API Management portal.
Another thing to clarify is that I can bind other services, but not this one.
Does anyone know how I can fix those problems? Is there a known issue with IBM API Management service?
this seems to be an error with the service API Management instance you are trying to bind to.
You could open a ticket to support team following the link you can find here:
https://developer.ibm.com/bluemix/support/
Click on 'Contact IBM' and open a 'Support ticket'