In my recipe I have to download git repository and run CMake. After CMake finish its work additional directory OUT is created which contain setup.py file that I like to run in do_install?
I have tried:
DEPENDS = "setuptools python"
do_install () {
python OUT/setup.py install
}
But it raise no setup.py found error.
Can anyone deal with such issue?
That's happen because bitbake doesn't know where setup.py is stored - You need to use ${S} variable generated by bitbake to provide full path to this script.
Please read about how do_install() task work - link
At the moment I have reorganized my recipe which looks like below:
LICENSE = "CLOSED"
BB_STRICT_CHECKSUM = "0"
inherit cmake setuptools pythonnative
DEPENDS = "boost udev python swig-native python-native python-setuptools-native cmake-native"
SRC_URI = " \
git://github.com/my_repo.git;name=my_name \
file://0001-system-install.patch \
"
SRCREV_my_name = "404ff3eeff0d79c15cbfdbc126c4bff2996baea6"
S = "${WORKDIR}/git"
PARALLEL_MAKEINST = ""
Project downloaded from git base on CMake which has install like that:
install(CODE "execute_process(COMMAND python \"${PROJECT_SOURCE_DIR}/python/setup.py\" \"install\")")
But when I call recipe to build (bitbake my_recipe) or build image which contains that recipe (bitbake my_image) i received such error:
ERROR: pc-ble-driver-git-r0 do_compile: python setup.py build execution failed.
ERROR: pc-ble-driver-git-r0 do_compile: Function failed: do_compile (log file is located at /build/yocto-fsl/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/pc-ble-driver/git-r0/temp/log.do_compile.16502)
ERROR: Logfile of failure stored in: /build/yocto-fsl/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/pc-ble-driver/git-r0/temp/log.do_compile.16502
Log data follows:
| DEBUG: Executing shell function do_compile
| ERROR: python setup.py build execution failed.
| /build/yocto-fsl/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/pc-ble-driver/git-r0/recipe-sysroot-native/usr/bin/python-native/python: can't open file 'setup.py': [Errno 2] No such file or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /build/yocto-fsl/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/pc-ble-driver/git-r0/temp/log.do_compile.16502)
ERROR: Task (/build/yocto-fsl/sources/meta-slabs/recipes-external/pc-ble-driver/pc-ble-driver_git.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2195 tasks of which 2194 didn't need to be rerun and 1 failed.
P.S. On my PC when I build CMake project and call make install everything go as I assumed.
Any other suggestion how to deal with that?
Try add below command in your recipe file
distutils_do_compile() {
:
}
distutils_stage_headers() {
:
}
distutils_stage_all() {
:
}
distutils_do_install() {
:
}
and see more detail information below...
./poky/meta/classes/distutils-tools.bbclass
Related
I'm trying to add a neovim plugin that doesn't exist in nixpkgs yet (modes.nvim), but having trouble getting it to work.
I'm using NixOS 22.05, and Home Manager, and I am using the following to build this plugin:
pkgs.vimUtils.buildVimPlugin {
name = "modes-nvim";
src = pkgs.fetchFromGitHub {
owner = "mvllow";
repo = "modes.nvim";
rev = "3188692abf02a8838ec75e59d68c2ce3e4323f5c";
sha256 = "sha256-2QDpwQ9+F5t5gTR1KLVzRrvriwo5JUHatZEJnc0ojV8=";
};
}
Initially, I used lib.pkgs.fakeSha256 to get a "mismatched hash" error, and copy/pasted the has from that error message, so I think it's correct, though other things I've seen on the internet seem to have the SHA256 as a hex string, so not sure what's going on there.
When I run home-manager switch, I get the following error:
these 12 derivations will be built:
/nix/store/pna2lzjc3q56z59b2kfazzxi8m6swp8d-vimplugin-modes-nvim.drv
/nix/store/mnj1d881d8s57yj3y8wjy7i9nl3m089f-vimplugin-modes-nvim.drv
/nix/store/5l8vqvx2bbawkkj92s8qd0p5hw16pcmq-vim-pack-dir.drv
/nix/store/jgqf68sd50s79pydzs9154p509l5109v-hm_nviminit.vim.drv
/nix/store/rq8f75qr9ahrfr0hvp51inn19088bz5p-manifest.vim.drv
/nix/store/hbzm2xr6nv8mr2l9nrlf742fqdmw9nv3-neovim-0.7.2.drv
/nix/store/zks47ifk7njz1s8y7hvq357ac8z6azkd-neovim-0.7.2-fish-completions.drv
/nix/store/rkaa094vvyjcyy4v1zkh4f8xz64vqxas-cameron-fish-completions.drv
/nix/store/0073403x9b4wv13gm7a6bqy4765pi8g5-home-manager-files.drv
/nix/store/lxwpbhb6ryhwrff4cjyniff11843cf9x-home-manager-path.drv
/nix/store/xbbn44253wjh90md4hqrrc2wfpafkc55-activation-script.drv
/nix/store/ijwmv897xc2wlr1ij4a30vk4z154ikbf-home-manager-generation.drv
building '/nix/store/pna2lzjc3q56z59b2kfazzxi8m6swp8d-vimplugin-modes-nvim.drv'...
Sourcing vim-command-check-hook.sh
Using vimCommandCheckHook
Sourcing vim-gen-doc-hook
unpacking sources
unpacking source archive /nix/store/fcxyif8piqar9w9ynmi6ym71hw6zsy7a-source
source root is source
patching sources
configuring
no configure script, doing nothing
building
build flags: SHELL=/nix/store/iffl6dlplhv22i2xy7n1w51a5r631kmi-bash-5.1-p16/bin/bash
test -r dependencies/pack/vendor/start/plenary.nvim || git clone --depth=1 https://github.com/nvim-lua/plenary.nvim.git dependencies/pack/vendor/start/plenary.nvim
/nix/store/iffl6dlplhv22i2xy7n1w51a5r631kmi-bash-5.1-p16/bin/bash: line 1: git: command not found
make: *** [Makefile:7: install_dependencies] Error 127
error: builder for '/nix/store/pna2lzjc3q56z59b2kfazzxi8m6swp8d-vimplugin-modes-nvim.drv' failed with exit code 2;
last 10 log lines:
> unpacking source archive /nix/store/fcxyif8piqar9w9ynmi6ym71hw6zsy7a-source
> source root is source
> patching sources
> configuring
> no configure script, doing nothing
> building
> build flags: SHELL=/nix/store/iffl6dlplhv22i2xy7n1w51a5r631kmi-bash-5.1-p16/bin/bash
> test -r dependencies/pack/vendor/start/plenary.nvim || git clone --depth=1 https://github.com/nvim-lua/plenary.nvim.git dependencies/pack/vendor/start/plenary.nvim
> /nix/store/iffl6dlplhv22i2xy7n1w51a5r631kmi-bash-5.1-p16/bin/bash: line 1: git: command not found
> make: *** [Makefile:7: install_dependencies] Error 127
For full logs, run 'nix log /nix/store/pna2lzjc3q56z59b2kfazzxi8m6swp8d-vimplugin-modes-nvim.drv'.
error: 1 dependencies of derivation '/nix/store/mnj1d881d8s57yj3y8wjy7i9nl3m089f-vimplugin-modes-nvim.drv' failed to build
error: 1 dependencies of derivation '/nix/store/5l8vqvx2bbawkkj92s8qd0p5hw16pcmq-vim-pack-dir.drv' failed to build
error: 1 dependencies of derivation '/nix/store/jgqf68sd50s79pydzs9154p509l5109v-hm_nviminit.vim.drv' failed to build
error: 1 dependencies of derivation '/nix/store/rq8f75qr9ahrfr0hvp51inn19088bz5p-manifest.vim.drv' failed to build
error: 1 dependencies of derivation '/nix/store/0073403x9b4wv13gm7a6bqy4765pi8g5-home-manager-files.drv' failed to build
error: 1 dependencies of derivation '/nix/store/hbzm2xr6nv8mr2l9nrlf742fqdmw9nv3-neovim-0.7.2.drv' failed to build
error: 1 dependencies of derivation '/nix/store/ijwmv897xc2wlr1ij4a30vk4z154ikbf-home-manager-generation.drv' failed to build
It appears to be failing due to git not being found. Of course, I have git installed for me, but perhaps this command is being run in an environment that doesn't have access to my installed packages.
I'm very new to Nix and NixOS, so I'm not really sure how to begin fixing this issue. I've searched online for answers, but haven't found anything about this issue. Any advice is much appreciated.
I want to setup a private tangle on my own virtual machine with Ubuntu 18.04, 4GB RAM and 20GB memory.
I have follow this instructions: https://docs.iota.org/docs/compass/0.1/how-to-guides/set-up-a-private-tangle. Every command works fine until reach this one: bazel run //docker:layers_calculator.
It shows an error as follows:
Starting local Bazel server and connecting to it...
ERROR: /home/istabraq/compass/third-party/maven_deps.bzl:3:5: Traceback (most recent call last):
File "/home/istabraq/compass/WORKSPACE", line 42
maven_jars()
File "/home/istabraq/compass/third-party/maven_deps.bzl", line 3, in maven_jars
native.maven_jar(<4 more arguments>)
type 'struct' has no method maven_jar()
ERROR: error loading package '': Encountered error while reading extension file 'protobuf_deps.bzl': no such package '#com_google_protobuf_deps//': error loading package 'external': Could not load //external package
ERROR: error loading package '': Encountered error while reading extension file 'protobuf_deps.bzl': no such package '#com_google_protobuf_deps//': error loading package 'external': Could not load //external package
INFO: Elapsed time: 4.743s
INFO: 0 processes.
FAILED: Build did NOT complete successfully (0 packages loaded)
FAILED: Build did NOT complete successfully (0 packages loaded)
How can I solve this problem? what I have missed?
read carefully the message given after running bazel installer:
Make sure you have "/home/yourusername/bin" in your path. You can also activate bash completion by adding the following line to your :
source /home/yourusername/.bazel/bin/bazel-complete.bash
You can check with: "bazel info" or "bazel version"
Unfortunately, there are further errors:
https://github.com/iotaledger/compass/issues/142
I have solve this issue by using this commands:
Step 3: Set up your environment
If you ran the Bazel installer with the --user flag as above, the Bazel executable is installed in your $HOME/bin directory. It’s a good idea to add this directory to your default paths, as follows:
export PATH="$PATH:$HOME/bin"
You can also add this command to your ~/.bashrc or ~/.zshrc file to make it permanent.
reference:
https://docs.bazel.build/versions/master/install-ubuntu.html
I have tried to create a custom recipe, in Yocto project, for mgetty. But when I build my custom image, there are some issues that I cannot figure out.
This is my custom mgetty_1.2.0.bb
DESCRIPTION = "mgetty 1.2.0 recipe"
SECTION = "mgetty"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=fd3b2e6132b4ff4cb475558807ded25f"
SRC_URI = "ftp://mgetty.greenie.net/pub/mgetty/source/1.2/mgetty-${PV}.tar.gz"
SRC_URI[md5sum] = "6700f55a61f3a71ce7b882a0d0b82d19"
inherit autotools
And this is the error output:
ERROR: mgetty-1.2.0-r0 do_compile: oe_runmake failed
ERROR: mgetty-1.2.0-r0 do_compile: Function failed: do_compile (log file is
located at [...path...])
ERROR: Logfile of failure stored in: [...path...]
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function do_compile
| NOTE: make -j 8
| make: *** No targets specified and no makefile found. Stop.
| ERROR: oe_runmake failed
| WARNING: [...path...] exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at [...path...])
ERROR: Task ([...path...]/recipes-mgetty/mgetty/mgetty_1.2.0.bb:do_compile)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 2741 tasks of which 2734 didn't need to be
rerun and 1 failed.
NOTE: Writing buildhistory
Did I missed something in my recipe?
I'd suggest using devtool if you are new to Yocto. So, in this case:
devtool add mgetty ftp://mgetty.greenie.net/pub/mgetty/source/1.2/mgetty-1.2.0.tar.gz
This will create a local workspace for you with the recipe and sources. Now, devtool should be able to detect some of the things automatically based on presence of certain files in the package.
But, for projects like this, you might have to make changes to the Makefile as well to make sure that it doesn't override the compiler and flags variables. So, in this case, make changes to ensure CC, CFLAGS, LDFLAGS is not over-ridden etc. (replacing = with ?= would be one way of doing it). Once that is done, use 'devtool build' to build your recipe and resolve any further issues.
Once you're done with the changes, please create commits for them in the devtool workspace and use 'devtool finish' to create patches for these commits and have them included them in your recipe. See:
https://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#sdk-devtool-use-devtool-modify-to-modify-the-source-of-an-existing-component
For more information, refer to the manual.
I am perorming following steps for compiling source code locally. i am using poky version pyro of yocto. but after successfully clean the source code, while compiling source code is remove and error is display.
step 1
bitbake -v -c clean u-boot
step 2
bitbake -v u-boot
------------------------------Eroor-------------------------------
make: *** No rule to make target 'am335x_boneblack_config'. Stop.
make: Leaving directory '/u-boot/u-boot_v2017.01/u-boot_src'
ERROR: u-boot-1_2017.01-r0 do_compile: oe_runmake failed
ERROR: u-boot-1_2017.01-r0 do_compile: Function failed: do_compile (log file is located at /PYRO_BUILD/tmp/work/beaglebone-poky-linux-gnueabi/u-boot/1_2017.01-r0/temp/log.do_compile.10915)
ERROR: Logfile of failure stored in: /PYRO_BUILD/tmp/work/beaglebone-poky-linux-gnueabi/u-boot/1_2017.01-r0/temp/log.do_compile.10915
how should i resolve it?
make: *** No rule to make target 'am335x_boneblack_config'. Stop.
make: Leaving directory
'//src_bsp/u-boot/u-boot_v2017.01/u-boot_src'
From above error, It seems that you have uboot code locally at '//u-boot/u-boot_v2017.01/u-boot_src' which gets deleted on compiling(bitbake -v u-boot).
Try using EXTERNALSRC instead of S to specify path to u-boot source code as follows :
inherit externalsrc
EXTERNALSRC = "/<workspace>/u-boot/u-boot_v2017.01/u-boot_src"
EXTERNALSRC_BUILD = "/<workspace>/u-boot/u-boot_v2017.01/u-boot_src"
This Problem regards Openembedded/Yocto.
I have source code which needs to be compiled by a custom python3 script.
That means, that some python3 script should run during the do_compile() process.
The script imports setuptools, therefore, I added DEPENDS += "python3-setuptools-native" to the recipe. As far as I understand the documentation, this should make the setuptools module available for the building process (native).
But when bitbake executes the do_compile() process, I get this error: no module named 'setuptools'.
Let me break it down to a minimal (non-)working example:
FILE: test.bb
LICENSE = "BSD"
LIC_FILES_CHKSUM = "file://test/LICENSE;md5=d41d8cd98f00b204e9800998ecf8427e"
DEPENDS += "python3-setuptools-native"
SRC_URI = "file://test.py \
file://LICENSE"
do_compile() {
python3 ${S}/../test.py
}
FILE: test.py
import setuptools
print("HELLO")
bitbaking:
$ bitbake test
ERROR: test-1.0-r0 do_compile: Function failed: do_compile (log file is located at /path/to/test/1.0-r0/temp/log.do_compile.8532)
ERROR: Logfile of failure stored in: /path/to/test/1.0-r0/temp/log.do_compile.8532
Log data follows:
| DEBUG: Executing shell function do_compile
| Traceback (most recent call last):
| File "/path/to/test-1.0/../test.py", line 1, in <module>
| import setuptools
| ImportError: No module named 'setuptools'
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /path/to/test/1.0-r0/temp/log.do_compile.8532)
ERROR: Task (/path/to/test.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 400 tasks of which 398 didn't need to be rerun and 1 failed.
NOTE: Writing buildhistory
Summary: 1 task failed:
/path/to/test.bb:do_compile
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Is my exepectation wrong, that DEPENDS += "python3-setuptools-native" makes the python3 module 'setuptools' available to the python3 script in do_compile()? How may I accomplish this?
Under the hood quite a bit more is needed to get working setuptools support. Luckily there's a class to handle that:
inherit setuptools3
This should be all that's need to package a setuptools based project with OE-Core. As long as your project has a standard setup.py you don't need to write any do_compile() or do_install() functions.
If you do need to look at the details, meta/classes/setuptools3.bbclass and meta/classes/distutils3.bbclass should contain what you need (including the rather unobvious way to call native python from a recipe).