First of all, I am new to Streamsets.
I installed the Full Tarball tar, following the instructions for Systemd systems, since I'm working on a Ubuntu 16.04 VM (host is Windows 10).
It worked well for a time, but when i restarted my VM, SDC stopeds working. I deleted my VM and tried with a new one, and I now have the following error when starting the sdc service :
Job for sdc.socket failed. See "systemctl status sdc.socket" and "journalctl -xe" for details.
When I look at the first option, I have this error message :
sdc.socket : Failed to listen on sockets : Address already in use
Failed to listen on sdc.socket
I let the default configuration during the installation, so the listening port is 18630.
When I look at the running process to see which one uses this port, there's none (lof -i :18630 | grep LISTEN). Same on host.
Does anyone have an idea about this ?
Related
telnet is necessary in order to maintain compatibility with older software in this case. I'm working with the Yocto Rocko 2.4.2 distribution. when I try to telnet to the board I'm getting the oh so detailed message "connection refused".
Using the method here and the options here I modified the busybox configuration per suggestion. When the board is booted up and logged in, if you execute: telnet, it spits out usage info and a quick directory check shows that telnet is installed to /usr/bin/telnet. My guess is that the telnet client is installed but the telnet server is not running?
I need to get telnetd to start manually at least so I know it will work with an init script in place. The second reference link there suggests that 'telnetd will not be started automatically though...' and that there will need to be an init script. How can I start telnetd manually for testing?
systemctl enable telnetd
returns: Unit telnetd.service could not be found
UPDATE
telnetd in located in /usr/sbin/telnetd. I was able to manually start the telnetd service for testing from there. After manually starting the service telnet login now works. looking into writing a systemd init script to auto start the telnetd service, so I suppose this issue is closed. unless anyone would like to offer up detailed telnet busybox configuration and setup steps as an answer to 'How to configure telnet service for yocto image'
update
Perhaps there is something more? I created a unit file that looks like this:
[Unit]
Description=auto start telnetd
[Service]
ExecStart=/usr/sbin/telnetd
[Install]
WantedBy=multi-user.target
on reboot, systemd indicates the process executed and succeeded:
systemctl status telnetd
.
.
.
Process: 466 ExecStart=/usr/sbin/telnetd (code=exited, status=0/SUCCESS)
.
.
.
The service is not running however. netstat -l does not list it and telnet login fails. Something I'm missing?
last update...i think
so following this post, I managed to get telnet.socket service to startup on reboot.
systemctl status telnet.socket
shows that it is running and listening on 23. Now however, when I try to remote in with telnet I'm getting
Connection closed by foreign host
Everything I've read so far has been talking about xinetd service (which I do not have...). What is confusing is that, if I just navigate to /usr/sbin/ and execute telnetd, the server is up and running and I can telnet into the board, so I do not believe I'm missing any utilities or services (like the above mentioned xinetd), but something is still not being configured correctly. any ideas?
I've got problem with completing pgadmin4 installation thru sudo /usr/pgadmin4/bin/setup-web.sh command.
During this process instalator does not recognizing that Apache is running and asks me if I want to start it:
The Apache web server is not running. We can enable and start the web server for you to finish pgAdmin 4 installation. Continue (y/n)? y
Then it just spits some errors:
Too few arguments.
Error enabling . Please check the systemd logs
Too few arguments.
Error starting . Please check the systemd logs
So far I havn't found where the logs are stored.
About my apache, I am quite sure that my server is running, because I can connect to it through browser, phpmyadmin is working properly, and service apache2 status returns * apache2 is running. By my understanding apache2 is just fancy word for httpd service, and there is no other service called simply apache.
PostgreSQL seems to work properly from command line, haven't tested if I can connect to it yet, but this shouldn't be the case right?
I am using
**PostgreSQL:** 12.5 (Ubuntu 12.5-0ubuntu0.20.04.1)
**Ubuntu:** Ubuntu 20.04 LTS
**Server:** Apache/2.4.41 (Ubuntu)
I had the same issue for Debian 10 and Ubuntu 20. The /usr/pgadmin4/bin/setup-web.sh script is using 'uname -a' which doesn't contain "Debian" identifier in the return string. Updating this to read /proc/version will allow APACHE to be specified as the Debian variant of apache2.
Change:
UNAME=$(uname -a)
To:
UNAME=$(cat /proc/version)
I had a similar problem with Ubuntu running inside WSL 2. Managed to resolve it by modifying the /usr/pgadmin4/bin/setup-web.sh script. I moved these lines outside of the conditional:
IS_DEBIAN=1
APACHE=apache2
This allowed the installation to progress beyond the Too few arguments. error. There was still an error however:
System has not been booted with systemd as init system (PID 1). Can't operate.
Error restarting apache2. Please check the systemd logs
I resolved this by running:
sudo service apache2 restart
After this I tried bringing up the admin page by visiting http://127.0.0.1/pgadmin4 from the Windows host. This still didn't work, and had to connect using the Ubuntu machine's ip address (you can find it out via ifconfig) which finally allowed me to see the login page.
I am trying to install Kubernetes on windows server 2016.
I tried to install minikube, and got some errors.
This is the tutorial that I followed:
https://www.assistanz.com/installing-minikube-on-windows-2016-server/
This is the command + error that I got:
PS C:\Windows\system32> minikube start –vm-driver=hyperv –hyperv-virtual-switch=Minikube
Starting local Kubernetes v1.10.0 cluster...
Starting VM... Downloading Minikube ISO
170.78 MB / 170.78 MB [============================================] 100.00% 0s
E1106 19:29:10.616564 11852 start.go:168] Error starting host: Error creating host: Error executing step: Running precreate checks.
: VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path.
Retrying.
E1106 19:29:10.689675 11852 start.go:174] Error starting host: Error creating host: Error executing step: Running precreate checks.
: VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path
================================================================================
An error has occurred. Would you like to opt in to sending anonymized crash
information to minikube to help prevent future errors?
To opt out of these messages, run the command:
minikube config set WantReportErrorPrompt false
================================================================================
Please enter your response [Y/n]:
Someone knows how to solve it?
I googled it, but no luck.
Thanks!
I was never able to get the config parameters to work with minikube start.
I was able to get past this error using the minikube config commands in PowerShell (should also work at a command prompt):
minikube config set vm-driver hyperv
minikube config set hyperv-virtual-switch ExternalSwitch
minikube config view
minikube delete
minikube start
For more information on the command run: minikube config -h
Looking at the documentation you have provided, I have noticed that the screenshot shows a slight difference to the one they've quote.
I have also found this command in another piece of documentation from kubernetes here, showing the same command as that from the screenshot.
I suggest you try the following command;
minikube start --vm-driver=hyperv --hyperv-virtual-switch=Minikube
It is true that OP has pasted the incorrect command, because there is - instead of --. I tried to pass this arguments to minikube and all you get is an instant error. So the issue must be somewhere else. I remember having similar issue and it got resolved after deleting the .kube and .minikube folders and trying to run it again.
After taking a closer look this tutorial is destined for installation of minikube inside of a Windows Server 2016 Virtual Machine, so you have to have a Nested Virtualization able hardware:
Prerequisites The Hyper-V host and guest must both be Windows Server
2016/Windows 10 Anniversary Update or later. VM configuration version
8.0 or greater. An Intel processor with VT-x and EPT technology -- nesting is currently Intel-only. There are some differences with
virtual networking for second-level virtual machines. See "Nested
Virtual Machine Networking".
So the main question is, is that true in your scenario? Are you trying to perform your steps on Windows Server Hyper-V virtual machine with nested virtualization feature?
If you confirm that I have technical possibilities to check it in that scenario.
Otherwise I recommend using the "traditional way" of running minikube in Windows, according for example to this tutorial.
I've updated jdk from 1.8_131 to 1.8_151 for CDH5. So i need to restart the cluster to make it take affect. In the begining i use cloudrea manager web page to restart, but it failed when zookeeper started which is the first step. Then I made a bad choice which is close cloudrea manager in terminal including kill -9 postgresql process. After that, i could't open the cloudrea manager web page.
I use following instructions to start the cluster.
service cloudera-scm-server-db start
service cloudera-scm-server start
service cloudera-scm-agent start
All of them are failed, because /var/log/cloudera-scm-server and /var/log/cloudera-scm-agent disappear.
So I creat these two files manually also include dg.log and cloudera-scm-agent.log
At this time, the server and agent could start. But server-db still can not. The next is some details.
Starting cloudera-scm-server-db (via systemctl): Job for
cloudera-scm-server-db.service failed because the control process
exited with error code. See "systemctl status
cloudera-scm-server-db.service" and "journalctl -xe" for details
journalctl -xe
The CM is using external DB. Failed to start embedded DB service, giving up
service --status-all
What i've done:
So, what should i do now? thank you thank you very much!!!
The above problem had been sovled.
If you open this /etc/cloudera-scm-server/db.properties file, which shown as below.
# cat /etc/cloudera-scm-server/db.properties
Auto-generated by scm_prepare_database.sh
#
Sat Oct 1 12:19:15 PDT 201
#
com.cloudera.cmf.db.type=postgresql
com.cloudera.cmf.db.host=localhost
com.cloudera.cmf.db.name=scm
com.cloudera.cmf.db.user=scm
com.cloudera.cmf.db.password=TXqEESuhj5
com.cloudera.cmf.db.setupType=EXTERNAL
EXTERNAL is the crux.
In my CDH service, I use embedded postgresql as my server database. But it's not recommended to use by cloudera offical. I'm a new man on Cloudera, so I made a mistake.
I wrongly use a command which only prepared for Cloudera Manager Server external database.
/usr/share/cmf/schema/scm_prepare_database.sh postgresql scm scm scm_password
The above command can config db.properties
As long as you run above command, com.cloudera.cmf.db.setupType will be set to EXTERNAL(For more details about this, you can find in Cloudera docs)
The most direct and effective way is to reset password of scm.
Then
update the password
set Type as EMBEDDED
make port 7432 listening(you can use netstat -nltp to check)
in db.properties.
#vim cat /etc/cloudera-scm-server/db.properties
Auto-generated by scm_prepare_database.sh
Sat Oct 1 12:19:15 PDT 201
com.cloudera.cmf.db.type=postgresql
com.cloudera.cmf.db.host=localhost:7432
com.cloudera.cmf.db.name=scm
com.cloudera.cmf.db.user=scm
com.cloudera.cmf.db.password=new_password
com.cloudera.cmf.db.setupType=EMBEDDED
Now close all cloudera-scm service and restart in order server-db,server,agent.
If /var/log was cleared wrongly.
You can creat these files such as /var/log/cloudera-scm-server and /var/log/cloudera-scm-agent manually.
It is noteworthy that you should creat these file by user cloudera-scm, otherwise the log can not be written, and you won't find what error happened from log file.
I have stopped a virtual machine with CentOS running an instance of Context Broker. Upon relaunching the system with the enabler, the latter gives a Fatal Error. See the below log:
# contextBroker
INFO#13:18:32 contextBroker.cpp[1348]: Orion Context Broker is running
INFO#13:18:32 mongoGlobal.cpp[164]: Successful connection to database
INFO#13:18:32 contextBroker.cpp[1157]: Connected to mongo at localhost:orion
INFO#13:18:32 mongoGlobal.cpp[483]: Database Operation Successful ({ conditions.type: "ONTIMEINTERVAL" })
INFO#13:18:32 rest.cpp[901]: Fatal Error (error starting REST interface)
I'm working on the 4.1.2 version of Orion, CentOS 6 running in VirtualBox. Running with su because I get a permission denied on a log file error. For info, I have enabled bridging network connection just before the VM reboot.
Is it the fact that the broker was not closed correctly that there is something blocking its restart? (PS. yes I know that there is a nearly exact same error message in the administration guide, but I don't see any solutions there)
Thank you!
EDIT: one solution that works is uninstalling the contextBroker package and installing it again. I wish there was a cleaner way!
EDIT: this problem reproduces every time I kill the contextBroker application - then every time restarts don't help, reinstalling the package does.
Make sure there is no other instance of the broker running (ps aux | grep contextBroker), using the same port.
If there is another instance of the broker running, then the port will be taken and the REST initialization will fail.
About running as root because of log-file permissions ... Why not simply change the owner of the log-file instead?