I cannot load VSCOde onto my old Toshiba laptop using Fedoa23. I follow the instructions from the web and finally get the message "No package code availale". I have previously installes VSCode on an old computer using Fedora23 but this time it does not work? Where do I go wrong?
Thanks.
Don't know, but this works for me.
You can use these step to install VSCode:
sudo rpm --import https://packages.microsoft.com/keys/microsoft.asc
sudo sh -c 'echo -e "[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc" > /etc/yum.repos.d/vscode.repo'
Then update the package cache and install the package using dnf (Fedora 22 and above):
dnf check-update
sudo dnf install code
Or on older versions using yum:
yum check-update
sudo yum install code
I am trying to install a package on CentOS, but it throws error when I run the "yum" command. The internet connection is working fine.
I try to yum clean all but problem persist.
Error:
[root#dcos-master3 ~]# yum install ntp
Loaded plugins: fastestmirror
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/$releasever/x86_64
My yum repolist is the next:
[root#dcos-master3 ~]# yum repolist list
Loaded plugins: fastestmirror
https://yum.dockerproject.org/repo/main/centos/%24releasever/repodata/repomd.xml: [Errno 14] HTTPS Error 403 - Forbidden
Trying other mirror.
To address this issue please refer to the below knowledge base article
https://access.redhat.com/solutions/69319
If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/
repolist: 0
If I list the repolist:
[root#dcos-master3 ~]# yum repolist
Loaded plugins: fastestmirror
https://yum.dockerproject.org/repo/main/centos/%24releasever/repodata/repomd.xml: [Errno 14] HTTPS Error 403 - Forbidden
Trying other mirror.
To address this issue please refer to the below knowledge base article
https://access.redhat.com/solutions/69319
If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/
repo id repo name status
base/$releasever/x86_64 CentOS-$releasever - Base 0
dockerrepo/$releasever Docker Repository 0
extras/$releasever/x86_64 CentOS-$releasever - Extras 0
updates/$releasever/x86_64 CentOS-$releasever - Updates 0
repolist: 0
BEFORE TRYING ANY OF THIS, HAVE A BACKUP OF YOUR MACHINE, YOU COULD DAMAGE YOUR OS MORE/COMPLETELY
It seems that your yum variable $releasever is somehow corrupt,
it usually is caused by missing centos-release package on the machine for some obscure reasons.
You can check if you have the package by:
rpm -qi centos-release
You will probably see:
"package centos-release is not installed"
First find out the exact centos version that you have by executing as root:
cat /etc/redhat-release
You will see something like this:
CentOS Linux release 7.3.1611 (Core)
You can fetch the centos-release package from repo by:
wget http://vault.centos.org/centos/7.3.1611/updates/x86_64/Packages/centos-release-7-3.1611.el7.centos.2.5.x86_64.rpm
Now run reinstall centos-release package via rpm:
sudo rpm -Uvh --replacepkgs centos-release-7-3.1611.el7.centos.2.5.x86_64.rpm
As next you can try to install something with yum and you might get:
[root#dcos-master3 ikerlan]# sudo yum install wget
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
error: cannot open Packages index using db5 - (-30969)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
Now you can try to reboot the machine or try to use the following command to rebuild the rpm db:
rpm --rebuilddb
I came across the same issue while downloading some packages in centos 7. After days of search, I found the solution:
Go to the yum repo directory.
cd /etc/yum.repos.d.
Make a copy of the CentOS-Base.repo file.
cp CentOS-Base.repo CentOS-Base.repo.old
Edit the CentOS-Base.repo file. Comment mirrorlist and uncomment baseurl.
vi CentOS-Base.repo
[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Now when you use yum, do the following.
sudo yum --disablerepo=* --enablerepo=base install httpd
Likewise for yum update.
sudo yum --disablerepo=* --enablerepo=base install httpd
It should work now.
I ran into this problem when attempting to install MariaDB on CentOS 7. I was super frustrated and after much searching found the answer at this link.
Here is what fixed this problem for me. Run as root.
# yum --disablerepo "*" --enablerepo epel install [package]
# yum clean all
"epel" can be whatever repo you like, but this one worked for me. Place [package] in the command just as written, not what package you are trying to install.
After you run the above, exit root and run whatever install you were attempting before encountering the error.
I noticed that in the failing url, your $releasever is %24releasever, but it should be 7 or 7.14.xx. Please check your yum config file at /etc/yum/var, or search in every .repo file, to see what is its value. It may be corrupted.
See Red Hat documentation for more information about how to set these variables.
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/deployment_guide/sec-using_yum_variables
yum install http://rpms.remirepo.net/enterprise/remi-release-7.rpm -y
yum -y install yum-utils
yum-config-manager --enable remi-php74
Then proceed to your installation/updates/etc
Always make sure NAT is active on your centos7. Specially when there is a VMnet2 for host. Because sometimes VMNet2 can be active instead of NAT and because of that you will not be able to connect to the internet through centos7. This is just a one reason for getting that error.
I have this Unable to install chromium in my centOS problem in Centos7. Suggested solution does not work in 7. It's missing libude.so dependency.
After some try and error I came to simple solution as simple as:
yum install epel-release
yum install chromium
you should add the third yum to your yum repository under the file yum.repos.d,such as epel ,rpmforge.and then goto terminal with command:
yum -y install chromium.x86_64
once compelete,a chromuim browser will display on your application manager,you can click it to open on your Desktop.
also you can use the command chromium-browser on terminal.
I am trying to install mongodb 3.2 on a CentOS 7 machine and facing issues in locating the packages.
I have updated the repo file as per the documentation:
[mongodb-org-3.2]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/3.2/x86_64/
gpgcheck=0
enabled=1
When running sudo yum install mongodb-org I am getting this error:
[centos#ip-10-24-1-228 ~]$ sudo yum install mongodb-org
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: ftp.osuosl.org
* epel: linux.mirrors.es.net
* extras: mirror.lax.hugeserver.com
* updates: mirror.hmc.edu
No package mongodb-org available.
Error: Nothing to do
Why do I get this message?
You need to configure the package management system (yum).
Create a /etc/yum.repos.d/mongodb.repo file to hold the following configuration information for the MongoDB repository:
If you have a 64bit system, use the following config:
[mongodb]
name=MongoDB Repository
baseurl=http://downloads-distro.mongodb.org/repo/redhat/os/x86_64/
gpgcheck=0
enabled=1
32bit isn't recommended for production deployments, but you may use:
[mongodb]
name=MongoDB Repository
baseurl=http://downloads-distro.mongodb.org/repo/redhat/os/i686/
gpgcheck=0
enabled=1
When you install the packages, you choose whether to install the current release or a previous one. This step provides the commands for both.
To install the latest stable version of MongoDB, run:
sudo yum install mongodb-org
To install a specific release of MongoDB, specify each component package individually and append to it the version number to the package name, as in the following example that installs the 3.2.0 release:
yum install mongodb-org-3.2.0 mongodb-org-server-3.2.0 mongodb-org-shell-3.2.0 mongodb-org-mongos-3.2.0 mongodb-org-tools-3.2.0
If you are still stuck, following this carefully might be helpful.
I figured out what was my problem. It was in my yum.conf file
exclude=mongodb-org,mongodb-org-server,mongodb-org-shell,mongodb-org-mongos,mongodb-org-tools
Once I commented out this line from yum.conf, everything went fine.
You should know that this URL https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/3.2/x86_64/ is not working anymore.
Go to http://repo.mongodb.org/yum/redhat/ and download mongodb-org.repo file.
Configure the package management system (yum), copy mongodb-org.repo to /etc/yum.repos.d/, so that you can install MongoDB directly, using yum.
Install the MongoDB packages and associated tools.
sudo yum install -y mongodb-org mongodb-org-server
Unfortunatelly mongodb website documentation suggests using https://docs.mongodb.org/manual/tutorial/install-mongodb-on-red-hat/, but this is wrong way.
This is a more recent version of Idos answer from Install MongoDB Community Edition on Red Hat Enterprise or CentOS Linux.
Configure the package management system (yum).
Create a /etc/yum.repos.d/mongodb.repo file so that you can install MongoDB directly, using yum.
For MongoDB 3.6
Use the following repository file:
[mongodb-org-3.6]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/3.6/x86_64/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-3.6.asc
For versions of MongoDB earlier than 3.6
To install the packages from an earlier release series such as 3.4, you can specify the release series in the repository configuration. For example, to restrict your system to the 3.4 release series, create a /etc/yum.repos.d/mongodb.repo file to hold the following configuration information for the MongoDB 3.4 repository:
[mongodb-org-3.4]
name=MongoDB 3.4 Repository
baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/3.4/x86_64/
gpgcheck=0
enabled=1
You can find .repo files for each release in the repository itself. Remember that odd-numbered minor release versions (e.g. 3.5) are development versions and are unsuitable for production use.
Install the MongoDB packages.
To install the latest stable version of MongoDB, issue the following command:
sudo yum install -y mongodb-org
To install a specific release of MongoDB, specify each component package individually and append the version number to the package name, as in the following example:
sudo yum install -y mongodb-org-3.6.4 mongodb-org-server-3.6.4 mongodb-org-shell-3.6.4 mongodb-org-mongos-3.6.4 mongodb-org-tools-3.6.4
When you install the packages, you choose whether to install the current release or a previous one. This step provides the commands for both.
Start MongoDB.
You can start the mongod process by issuing the following command:
sudo service mongod start
I know this issue is old and more than 2 years but I have received this error recently in Mongo DB 4.0
I have checked my yum.conf by
vi /etc/yum.conf yum.conf
and there was one line with the following.
exclude=courier* dovecot* exim* filesystem httpd* mod_ssl* **mongodb-org,mongodb-org-server,mongodb-org-shell,mongodb-org-mongos,mongodb-org-tools** mydns* nsd* p0f php* proftpd* pure-ftpd* spamassassin* squirrelmail*
Removed the
mod_ssl* mongodb-org,mongodb-org-server,mongodb-org-shell,mongodb-org-mongos,mongodb-org-tools
and changed it to
exclude=courier* dovecot* exim* filesystem httpd* mod_ssl* mydns* nsd* p0f php* proftpd* pure-ftpd* spamassassin* squirrelmail*
This has fixed my issue and should fix yours.
Hello Friend i will resoled problem
First Clean old data
sudo yum erase $(rpm -qa | grep mongod)
sudo rm -rf /etc/yum.repos.d/mongod*
sudo yum clean all
again create repo file new
/etc/yum.repos.d/mongodb-enterprise-4.4.repo
file so that you can install MongoDB enterprise directly using yum:
[mongodb-enterprise-4.4]
name=MongoDB Enterprise Repository
baseurl=https://repo.mongodb.com/yum/redhat/$releasever/mongodb-enterprise/4.4/$basearch/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-4.4.asc
Install MongoDB Enterprise 4.4.
Issue the following command:
sudo yum install -y mongodb-enterprise
Install a specific release of MongoDB Enterprise.
To install a specific release, you must specify each component package individually along with the version number, as in the following example:
sudo yum install -y mongodb-enterprise-4.4.1 mongodb-enterprise-server-4.4.1 mongodb-enterprise-shell-4.4.1 mongodb-enterprise-mongos-4.4.1 mongodb-enterprise-tools-4.4.1
If you only install mongodb-enterprise=4.4.1 and do not include the component packages, the latest version of each MongoDB package will be installed regardless of what version you specified.
Pin a specific version of MongoDB Enterprise.
Although you can specify any available version of MongoDB Enterprise, yum upgrades the packages when a newer version becomes available. To prevent unintended upgrades, pin the package by adding the following exclude directive to your /etc/yum.conf file:
exclude=mongodb-enterprise,mongodb-enterprise-server,mongodb-enterprise-shell,mongodb-enterprise-mongos,mongodb-enterprise-tools
By default, MongoDB runs using the mongod user account and uses the following default directories:
/var/lib/mongo (the data directory)
/var/log/mongodb (the log directory)
➤ If you installed via the package manager,
The default directories are created, and the owner and group for these directories are set to mongod.
➤ If you installed by downloading the tarballs,
The default MongoDB directories are not created. To create the MongoDB data and log directories:
sudo mkdir -p /var/lib/mongo
sudo mkdir -p /var/log/mongodb
sudo systemctl daemon-reload
sudo systemctl start mongod
Any Error Come than ones Clean old
Option:- not create socket file than /tmp
in old socket file remove
sudo systemctl daemon-reload
sudo systemctl start mongod
sudo service mongod status
more info to read https://docs.mongodb.com/manual/tutorial/install-mongodb-enterprise-on-red-hat/
https://www.mysterydata.com/how-to-install-mongodb-4-0-on-centos-7-rhel-7/
#nikolai.serdiuk seems to be correct. The baseurl provided in Mongo's Documentation doesn't seem to be functional. Replace that step with this instead (1):
yum-config-manager --add-repo http://repo.mongodb.org/yum/redhat/mongodb-org.repo
and then continue on with (2):
sudo yum install -y mongodb-org
Hope this helps.
Create a mongodb-org.repo file
sudo vi /etc/yum.repos.d/mongodb-org.repo
Add following content
[mongodb-org-3.4]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-
org/3.4/x86_64/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-3.4.asc
Then execute sudo yum install mongodb-org
Reference:docs.mongodb.com/manual/tutorial/install-mongodb-on-red-hat/
first you have to create repo in your redhat system.
cd /etc/yum.repos.d/mongodb-org.repo
and Enter i, and copy-past this.
[mongodb-org-4.0]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/4.0/x86_64/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-4.0.asc
and save it like- enter ctrl + : and enter : + qw
and run this command
yum install mongodb-org
Check and remove old version mongodb
yum list installed mongodb.x86_64
yum remove mongodb.x86_64
It helps
Hello Friend i will resoled problem
First Clean old data
sudo rm -rf /etc/yum.repos.d/mongod*
sudo yum clean all
again create repo file new
/etc/yum.repos.d/mongodb-enterprise-4.4.repo
file so that you can install MongoDB enterprise directly using yum:
[mongodb-enterprise-4.4]
name=MongoDB Enterprise Repository
baseurl=https://repo.mongodb.com/yum/redhat/$releasever/mongodb-enterprise/4.4/$basearch/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-4.4.asc
Install MongoDB Enterprise 4.4.
Issue the following command:
sudo yum install -y mongodb-enterprise
Install a specific release of MongoDB Enterprise.
To install a specific release, you must specify each component package individually along with the version number, as in the following example:
sudo yum install -y mongodb-enterprise-4.4.1 mongodb-enterprise-server-4.4.1 mongodb-enterprise-shell-4.4.1 mongodb-enterprise-mongos-4.4.1 mongodb-enterprise-tools-4.4.1
If you only install mongodb-enterprise=4.4.1 and do not include the component packages, the latest version of each MongoDB package will be installed regardless of what version you specified.
Pin a specific version of MongoDB Enterprise.
Although you can specify any available version of MongoDB Enterprise, yum upgrades the packages when a newer version becomes available. To prevent unintended upgrades, pin the package by adding the following exclude directive to your /etc/yum.conf file:
exclude=mongodb-enterprise,mongodb-enterprise-server,mongodb-enterprise-shell,mongodb-enterprise-mongos,mongodb-enterprise-tools
By default, MongoDB runs using the mongod user account and uses the following default directories:
/var/lib/mongo (the data directory)
/var/log/mongodb (the log directory)
➤ If you installed via the package manager,
The default directories are created, and the owner and group for these directories are set to mongod.
➤ If you installed by downloading the tarballs,
The default MongoDB directories are not created. To create the MongoDB data and log directories:
sudo mkdir -p /var/lib/mongo
sudo mkdir -p /var/log/mongodb
sudo systemctl daemon-reload
sudo systemctl start mongod
Any Error Come than ones Clean old
Option:- not create socket file than /tmp
in old socket file remove
sudo systemctl daemon-reload
sudo systemctl start mongod
sudo service mongod status
This command
yum-config-manager --add-repo http://repo.mongodb.org/yum/redhat/mongodb-org.repo
will create the repo as above suggested. Then it will work.
Follow the below steps to install MongoDB on CentOS
Add MongoDB yum repository
# vi /etc/yum.repos.d/mongodb.repo
Enter i and paste the below lines in the file
[MongoDB]
name=MongoDB Repository
baseurl=http://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/4.0/x86_64/
gpgcheck=0
enabled=1
Press esc to save the vim file then enter :wq to quit the saved file.
3.Install MongoDB server
yum install mongodb-org
Start MongoDB Service
# systemctl start mongod.service # For CentOS 7
# service mongod restart # For CentOS 6/5
Check Mongod version
mongod --version
Referance: Installing MongoDB on CentOS
When i try to install rpmforge (i need to install phpmyadmin) i get this error, any help would be greatly appreciated!
[root#plasticarmy ~]# yum http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm
Loaded plugins: fastestmirror
No such command: http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm. Please use /usr/bin/yum --help
[root#plasticarmy ~]#
Any help would be great!
Close, but you're missing "install" in the above yum command.
First, if you haven't already, import the key ->
sudo rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
Then 'yum install' ->
sudo yum install http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm
Try running:
rpm -Uvh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm
as root and it should work.
I had the same issue, and it was due to the fact that i was installing the wrong package, Note that "rpmforge-release-0.5.3-1" is a 0.5.3-1 release.
When I got the right release "epel-release-7-0.2" which is 7-0.2 as per the command:
sudo rpm -Uvh http://fedora.mirrors.romtelecom.ro/pub/epel/beta/7/x86_64/epel-release-7-0.2.noarch.rpm
The installation of the package was successful, and I could install phpMyAdmin later.
P.S: my CentOS is 7.