Related
On minikube for windows I created a deployment on the kubernetes cluster, then I tried to scale it by changing replicas from 1 to 2, and after that kubectl hangs and my disk usage is 100%.
I only have one container in my deployment
apiVersion: apps/v1
kind: Deployment
metadata:
name: first-deployment
spec:
replicas: 1
selector:
matchLabels:
run: app
template:
metadata:
labels:
run: app
spec:
containers:
- name: demo
image: ner_app
imagePullPolicy: IfNotPresent
ports:
- containerPort: 5000
all I did was run this after the pods were successfully deployed and running
kubectl scale --replicas=2 deployment first-deployment
In another terminal I was watching the pods using
kubectl get pods --watch
But everything is unresponsive and I'm not sure how to recover from this.
When I run kubectl get pods again it gives the following message
PS D:\docker\ner> kubectl get pods
Unable to connect to the server: net/http: TLS handshake timeout
Is there a way to recover, or cancel whatever process is running?
Also my VM's are on Hyper-V for Windows 10 Pro (minikube and Docker Desktop) both have the default RAM allocated - 2048MB
The container in my pod is a machine learning process and the model it loads could be large, in the order of 200MB to 300MB
You may have some proxy problems. Try following commands:
$ unset http_proxy
$ unset https_proxy
and repeat your kubectl call.
For me, the problem is that Docker ran out of memory. (EDIT: Possibly anyway; I wrote this post a while ago, and am now not so sure that is the root case, but did not write down my rationale, so idk.)
Anyway, to fix:
Fully close your k8s emulator. (docker desktop, minikube, etc.)
Shutdown WSL2. (wsl --shutdown) [EDIT: This step is apparently not necessary -- at least not always, since this time I skipped it, and the problem still resolved.]
Restart your k8s emulator.
Rerun the commands you wanted.
Sometimes it also works to simply:
Right click the Docker Desktop tray-icon, press "Restart Docker", and wait a few minutes for things to restart. (sometimes this fails, with Docker Desktop saying "Docker failed to start", so I'd generally recommend the more thorough process above)
Just happened to me on a new Windows 10 install with Ubuntu distro in WSL2. I solved the problem by running:
$ sudo ifconfig eth0 mtu 1350
(BTW, I was on a VPN connection when trying the 'kubectl get pods' command)
You can set up resource limits on deployments so that pods will not use the entire available resource in the node.
In my case I have my private EKS cluster and there is no 443(HTTPS) enabled in security groups.
My issue is solved after enabling the (HTTPS)443 port in security groups.
Kindly refer for AWS documentation for more details: "You must ensure that your Amazon EKS control plane security group contains rules to allow ingress traffic on port 443 from your connected network"
i solved this problem when execute the following command
minikube delete
and then start it
minikube start --vm-driver="virtualbox"
if use this why your pods will deleted
and when run kubectl get pods
you can see this result
No resources found in default namespace.
You could try $ unset all_proxy to reset the socket proxy.
Also, if you're connected to a VPN, try disconnecting - it seems that can interfere with connecting to a cluster.
I think the other answers don't really mention or refer to the vpn and proxy documentation for minikube: https://minikube.sigs.k8s.io/docs/handbook/vpn_and_proxy/
The NO_PROXY variable here is important: Without setting it, minikube may not be able to access resources within the VM. minikube uses two IP ranges, which should not go through the proxy:
192.168.99.0/24: Used by the minikube VM. Configurable for some hypervisors via --host-only-cidr
192.168.39.0/24: Used by the minikube kvm2 driver.
192.168.49.0/24: Used by the minikube docker driver’s first cluster.
10.96.0.0/12: Used by service cluster IP’s. Configurable via --service-cluster-ip-rang
So adding those IP ranges to your NO_PROXY environment variable should fix the issue.
Simply closing cmd, opening again, then
minikube start
And then executing the commands again solved this issue for me.
P.S: minikube start took less than a minute
Adding the IP address to the no_proxy list worked for me.
Obtain the IP address from ip addr output.
export no_proxy=localhost,127.0.0.1,<IP_ADDRESS>
restart minikube will work.
But if you don't want to delete it
then you can just switch to other cluster and then switch back.
I just click other kubenete cluster (ex: docker-desktop)
and then click back to the cluster I want to run (ex: minikube)
If you're on Linux or Mac, go to your virtualbox, and then on the toolbar choose 'Global Tools', then if you see two machines are using the same ip address, you should remove one of them. this image shows virtual box GUI
As this answer comes first on search for net-http-tls-handshake-timeout error
For those having issue with AWS EKS (and likely any K8s),
NO_PROXY solves problem by adding related IP/host to environment variable.
As suggested in comments for first answer.
For AWS EKS (when seeing this intermittently after vpc-cni addon upgrade)
replace for specific region or single url for your use case.
NO_PROXY=$NO_PROXY;eks.amazonaws.com
At least for Windows 10 and 11
$PS C:\oc rollback dc/my-app
Unable to connect to the server: net/http: TLS handshake timeout
For OpenShift 4.x the problem is that for some reason you are logged-out:
$PS C:\oc status
error: You must be logged in to the server (Unauthorized)
logging in by e.g.
$oc login -u developer
resolves the problem
Open PowerShell as an administrator and run the command "wsl --shutdown". You will see the same notification in your open Ubuntu terminal.
Open Docker Desktop.
Open a new terminal.
Run the command "minikube status" in the Ubuntu terminal.
Run the Minikube container. You can do this in Docker Desktop.
Run the command "minikube start".
That's it! You don't need to close your computer after this, and Minikube should work fine.
I am trying to implement auditing policy
My yaml
~/.minikube/addons$ cat audit-policy.yaml
# Log all requests at the Metadata level.
apiVersion: audit.k8s.io/v1beta1
kind: Policy
rules:
- level: Metadata
Pods got stuck
minikube start --extra-config=apiserver.Authorization.Mode=RBAC --extra-config=apiserver.Audit.LogOptions.Path=/var/logs/audit.log --extra-config=apiserver.Audit.PolicyFile=/etc/kubernetes/addons/audit-policy.yaml
😄 minikube v0.35.0 on linux (amd64)
💡 Tip: Use 'minikube start -p <name>' to create a new cluster, or 'minikube delete' to delete this one.
🔄 Restarting existing virtualbox VM for "minikube" ...
⌛ Waiting for SSH access ...
📶 "minikube" IP address is 192.168.99.101
🐳 Configuring Docker as the container runtime ...
✨ Preparing Kubernetes environment ...
▪ apiserver.Authorization.Mode=RBAC
▪ apiserver.Audit.LogOptions.Path=/var/logs/audit.log
▪ apiserver.Audit.PolicyFile=/etc/kubernetes/addons/audit-policy.yaml
🚜 Pulling images required by Kubernetes v1.13.4 ...
🔄 Relaunching Kubernetes v1.13.4 using kubeadm ...
⌛ Waiting for pods: apiserver
Why?
I can do this
minkub start
Then I go for minikube ssh
$ sudo bash
$ cd /var/logs
bash: cd: /var/logs: No such file or directory
ls
cache empty lib lock log run spool tmp
How to apply extra-config?
I don't have good news. Although you made some mistakes with the /var/logs it does not matter in this case, as there seems to be no way of implement auditing policy in Minikube (I mean there is, few ways at least but they all seem to fail).
You can try couple of ways presented in GitHub issues and other links I will provide, but I tried probably all of them and they do not work with current Minikube version. You might try to make this work with earlier versions maybe, as it seems like at some point it was possible with the way you have provided in your question, but as for now in the updated version it is not. Anyway I have spend some time on trying the ways from the links and couple of my own ideas but no success, maybe you will be able to find the missing piece.
You can find more information in this documents:
Audit Logfile Not Created
Service Accounts and Auditing in Kubernetes
fails with -extra-config=apiserver.authorization-mode=RBAC and audit logging: timed out waiting for kube-proxy
How do I enable an audit log on minikube?
Enable Advanced Auditing Webhook Backend Configuration
We are trying to run an instance of the RabbitMQ chart with Helm from the helm/charts/stable/rabbit project. I had it running perfect but then I had to restart k8s for some maintenance. Now we are completely unable to launch the RabbitMQ chart in any way shape or form. I am not even trying to run the chart with any variables, i.e. just the default values.
Here is all I am doing:
helm install stable/rabbitmq
I have confirmed I can simply run the default right on my local k8s which I'm running with Docker for Desktop. When we run the rabbit chart on our shared k8s the exact same way as on desktop and what we did before the restart, the following error is thrown:
Failed to get nodes from k8s - 503
I have also posted an issue on the Helm charts repo as well. Click here to see the issue on Github.
We are suspecting the DNS but are unable to confirm anything yet. What is very frustrating is after the restart every single other chart we installed restarted perfectly except Rabbit which now will not start at all.
Anyone know what I could do to get Rabbits peer discovery to work? Anyone seen issue like this after restarting k8s?
So I actually got rabbit to run. Turns out my issue was the k8s peer discovery could not connect over the default port 443 and I had to use the external port 6443 because kubernetes.default.svc.cluster.local resolved to the public port and could not find the internal, so yeah our config is messed up too.
It took me a while to realize the variable below was not overriding when I overrode it with helm install . -f server-values.yaml.
rabbitmq:
configuration: |-
## Clustering
cluster_formation.peer_discovery_backend = rabbit_peer_discovery_k8s
cluster_formation.k8s.host = kubernetes.default.svc.cluster.local
cluster_formation.k8s.port = 6443
cluster_formation.node_cleanup.interval = 10
cluster_formation.node_cleanup.only_log_warning = true
cluster_partition_handling = autoheal
# queue master locator
queue_master_locator=min-masters
# enable guest user
loopback_users.guest = false
I had to add cluster_formation.k8s.port = 6443 to the main values.yaml file instead of my own. Once the port was changed specifically in the values.yaml, rabbit started right up.
I'm wondering what is the reason of using rabbit_peer_discovery_k8s plugin, if values.yaml defaults to 1 replicas (your manifest file does not override this setting) ?
I was trying to reproduce your issue with given by you override values (dev-server.yaml), as per the details in your github issue #10811, but I somewhat failed. Here are my observations:
If to install RabbitMQ chart with your custom values, my rabbitmq-dev-default-0 pod gets stuck in CrashLoopBackOff state.
It`s quite hard to troubleshoot it further for me as bitnami`s rabbitmq image containers, used by this rabbitmq Helm chart, are shipped with non-root account.
On the other hand if rabbitmq chart is installed on my Kubernetes cluster (v1.13.2) in simplest form:
helm install stable/rabbitmq
I observe similar issue then. I mean rabbitmq server survives a simulated VM restart of all cluster nodes (including master), but I cannot connect to it from outside:
Post VM restart, I`m getting following error from my python mqclient:
socket.gaierror: [Errno -2] Name or service not known
Few remarks here:
Yes, I did port(s)-forward as per instructions on "helm status " command:
The readiness probe works fine:
curl -sS -f --user user:<my_pwd> 127.0.0.1:15672/api/healthchecks/node
{"status":"ok"}
rabbitmqctl to rabbitmq-server connectivity from inside the container works fine too:
kubectl exec rabbitmq-dev-default-0 -- rabbitmqctl list_queues
warning: the VM is running with native name encoding of latin1 which may cause Elixir to malfunction as it expects utf8. Please ensure your locale is set to UTF-8 (which can be verified by running "locale" in your shell)
Timeout: 60.0 seconds ...
Listing queues for vhost / ...
name messages
hello 11
From the moment I used kubectl port-forward to pod instead service, connectivity to rabbitmq server is restored:
kubectl port-forward --namespace default pod/rabbitmq-dev-default-0 5672:5672
$ python send.py
[x] Sent 'Hello World!'
Am working on Azure Kubernates where we can store Docker Images in Azure. Here am trying to check my kubectl version, then am getting
Unable to connect to the server: dial tcp [::1]:8080: connectex: No
connection could be made because the target machine actively refused
it.
For this I followed MSDN:uilding Microservices with AKS and VSTS – Part 2 and MSDOCS:Kubernetes on windows
So, can you please suggest me “How to resolve for this issue?”
I am on windows 10, and for me I did not enable kubernetes on Docker Desktop.
As you can see here, there are no contexts available.
So go to settings of docker desktop and enable it as follows.
Now run a command as follows.
kubectl config get-contexts
Ensure you see something like this.
Also you can also try listing the nodes as follows.
kubectl get nodes
I think you might missed out to configure the cluster, for that you need to run the below command in your command prompt.
az aks get-credentials --resource-group myResourceGroup --name myAKSCluster
The above CLI command creates .config file with complete cluster and nodes details in your local machine.
After that you run kubectl get nodes command in your command prompt, then you can get the list of nodes inside the cluster like in the below image.
For reference follow this Deploy an Azure Kubernetes Service (AKS) cluster.
If you can see that your config file is correctly configured by going to $HOME/.kube/config - Linux or %UserProfile%/.kube/config - Windows but you are still receiving the error message - try running command line as an administrator.
More information on the config file can be found here: https://kubernetes.io/docs/concepts/configuration/organize-cluster-access-kubeconfig/
In my case, I was shuffling between az aks k8s cluster and local docker-desktop.
So every time I change the cluster context I need to restart the docker, else I get the same described error.
Unable to connect to the server: dial tcp 127.0.0.1:6443: connectex: No connection could be made because the target machine actively refused it.
PS: make sure your cluster is started as shown in this picture showing (Stop local cluster)
For me it appeared to be due to Windows not having a HOME environment variable set. According to the docs kubectl will use the config file $(HOME)/.kube/config. But since this variable isn't set on Window it can't locate the file.
I created a HOME variable with the same value as USERPROFILE and it started working.
I'm using Hyper-V on Local Windows and I met this error because I didn't configure minikube.
(I know the question is about Azure, not minikube. But this article is on the top for the error message. So, I've put the solution here.)
1. enable Hyper-V.
Type in systeminfo on your Terminal. If you can find the line below,
Hyper-V Requirements: A hypervisor has been detected. Features required for Hyper-V will not be displayed.
Hyper-V works correctly.
If you can't, enable it from settings.
2. Create Hyper-V Network Switch
Open Hyper-V manager. (Searching it is the fastest way.)
Next, click your PC name on the left.
Then, you can find Virtual Switch Manager menu on the right.
Click it and choose External Virtual Switch with name: "Minikube Switch"
Click apply to create it.
3. start minikube
Go back to terminal and type in:
minikube start --vm-driver hyperv --hyperv-virtual-switch "Minikube Switch"
For more information, check the steps in this article.
Check docker is running and you started minikube or whichever cloud kube you using.
my issue resolved after running "minikube start --driver=docker"
Essentially this problem occurs if your minikube or kind isn't configured. Just try to restart your minikube or kind. If that doesn't solve your problem then try to restart your hypervisor which minikube uses.
minikube start
This command solved my issue.
I was facing the same error while firing the command "kubectl get pods"
The issue has been resolved by having following steps below:
a) First find out current-context
kubectl config get-contexts
CURRENT NAME CLUSTER AUTHINFO NAMESPACE
b) if no context is set then set it manually by using
kubectl config set-context <Your context>
Hope this will help you.
If you're facing this error on windows, its possible that your docker instance is not running.
These are the steps I followed to replicate the above error;
Stopped docker and then tried to start-up an nginx-deployment. Doing this caused the mentioned error above to happen.
How did I solve it?
Check if minikube is running in my case this was not running
Start minikube
Retry applying your configuration above. In my case see the screenshot below
When you see that your deployment has been created, then all should be fine.
I had exactly the same problem even after having correct config (by running an azure cli command).
It seems that kubectl expects HOME env.variable set but it did not exist for me. There is however a solution:
If you add a KUBECONFIG environmental variable that will point to config it will start working.
Example:
setx KUBECONFIG %UserProfile%\.kube\config
When the variable is present kubectl has no troubles reading from file.
P.S. It is an alternative to setting a HOME variable as suggested in another answer.
Azure self-hosted agent doesn't have the permission to access Kubernates cluster:
Remove Azure self-hosted agent - .\config.cmd Remove
configure again ( .\config.cmd) with a user have permission to access Kubernates cluster
I encountered similar problem:
> kubectl cluster-info
"To further debug and diagnose cluster problems, use 'kubectl cluster-info dump'.
Unable to connect to the server: dial tcp xxx.x.x.x:8080: connectex: No connection could be made because the target machine actively refused it."
> kubectl cluster-info dump
Unable to connect to the server: dial tcp xxx.0.0.x:8080: connectex: No connection could be made because the target machine actively refused it.
This setup was working fine until Docker for Desktop bought it's own copy of kubectl. There are 2 ways to overcome this situation:
1 - Quit / Stop Docker for Desktop while using the cluster
2 - Set KUBECONFIG file path
I tried both the options and they worked.
Found a good source for .kube/config, sending it over here for quick reference:
apiVersion: v1
clusters:
- cluster:
certificate-authority: fake-ca-file
server: https://1.2.3.4
name: development
- cluster:
insecure-skip-tls-verify: true
server: https://5.6.7.8
name: scratch
contexts:
- context:
cluster: development
namespace: frontend
user: developer
name: dev-frontend
- context:
cluster: development
namespace: storage
user: developer
name: dev-storage
- context:
cluster: scratch
namespace: default
user: experimenter
name: exp-scratch
current-context: ""
kind: Config
preferences: {}
users:
- name: developer
user:
client-certificate: fake-cert-file
client-key: fake-key-file
- name: experimenter
user:
password: some-password
username: exp
Reference: https://kubernetes.io/docs/tasks/access-application-cluster/configure-access-multiple-clusters/
Following #ilya-chernomordik,
I've added my config path to the System Variable by doing
setx KUBECONFIG "D:\Minikube\Minikube.minikube\config"
I have changed the default Location from C: Drive to D: Drive as i have less space in C.
Now the problem is fixed.
edit: after 5 mins, the api server again stopped. It's been more than 5-6 hours i'm trying to solve this issue. I'm not sure why this problem is happening, even after adding the coreect path.
On Rancher Desktop, make sure context is correctly choosen
In my situation, I'm in windows with docker desktop in a simple scenario just for studies, but the case is:
In the docker version in 20.10 or above, it come with kubernetes installed. Then it doesn't necessary installed a cluster adm like minikube. Then, when it just need to enable kubernetes in Docker Desktop configuration. Like:
Go to Docker Desktop: settings > kubernetes > check the box inside section Enable kubernetes and then click in Restart Kubernetes Cluster
When we do this, the docker provide all needed to works Kubernetes properly.
Referenced by: Blog
I have an weave network plugin.
inside my folder /etc/cni/net.d there is a 10-weave.conf
{
"name": "weave",
"type": "weave-net",
"hairpinMode": true
}
My weave pods are running and the dns pod is also running
But when i want to run a pod like a simple nginx wich will pull an nginx image
The pod stuck at container creating , describe pod gives me the error , failed create pod sandbox.
When i run journalctl -u kubelet i get this error
cni.go:171] Unable to update cni config: No networks found in /etc/cni/net.d
is my network plugin not good configured ?
i used this command to configure my weave network
kubectl apply -f https://git.io/weave-kube-1.6
After this won't work i also tried this command
kubectl apply -f “https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d ‘\n’)”
I even tried flannel and that gives me the same error.
The system i am setting kubernetes on is a raspberry pi.
I am trying to build a raspberry pi cluster with 3 nodes and 1 master with kubernetes
Dose anyone have ideas on this?
Thank you all for responding to my question. I solved my problem now. For anyone who has come to my question in the future the solution was as followed.
I cloned my raspberry pi images because i wanted a basicConfig.img for when i needed to add a new node to my cluster of when one gets down.
Weave network (the plugin i used) got confused because on every node and master the os had the same machine-id. When i deleted the machine id and created a new one (and reboot the nodes) my error got fixed. The commands to do this was
sudo rm /etc/machine-id
sudo rm /var/lib/dbus/machine-id
sudo dbus-uuidgen --ensure=/etc/machine-id
Once again my patience was being tested. Because my kubernetes setup was normal and my raspberry pi os was normal. I founded this with the help of someone in the kubernetes community. This again shows us how important and great are IT community is. To the people of the future who will come to this question. I hope this solution will fix your error and will decrease the amount of time you will be searching after a stupid small thing.
Looking at the pertinent code in Kubernetes and in CNI, the specific error you see seems to indicate that it cannot find any files ending in .json, .conf or .conflist in the directory given.
This makes me think it could be something as the conf file not being present on all the hosts, so I would verify that as a first step.