Please help find superscript j Unicode character code, if it is present. If not, do you know why?
I look up on Wikipedia. There is ⁱ, but no j.
Well, there's U+02B2 MODIFIER LETTER SMALL J. That said, as the name implies, it's intended for cases where a superscript 'j' serves as a sort of diacritic (e.g. in IPA, where it denotes that the previous consonant is palatalized). Using it as a pure superscript would be cheating; see "Why doesn't Unicode have a full set of superscripts and subscripts?" in the Unicode FAQ.
Is there any way I can write a superscript slash with Unicode?
My aim is to represent rational exponents in a nicer form than 123**(456/789).
Well unicode is full of characters. The meaning is up to its interpretation.
For superscript slash you can use:
Canadian Syllabics Final Acute 123⁴⁵⁶ᐟ⁷⁸⁹
Right Raised Omission Bracket 123⁴⁵⁶⸍⁷⁸⁹
Musical Symbol Repeated Figure-1 123⁴⁵⁶𝄍⁷⁸⁹
For subscript slash you can use:
Right Low Paraphrase Bracket 123₄₅₆⸝₇₈₉
If you have other solutions please comment and I will update my answer.
A helpful site to find special unicode characters: shapecatcher
No. On general grounds, we can be pretty sure that if such a character existed, it would be in the Superscripts and Subscripts block (not all superscripts are there, but the odds are that if any superscripts will be added, they will be placed there).
So you need some higher-level protocol, as you usually do, when you need superscripts beyond a fairly limited repertoire. Unicode is about encoding characters, not about layout and mathematical expressions.
Assuming http://en.wikipedia.org/wiki/Unicode_subscripts_and_superscripts is accurate, the answer is no.
Looking at the complete official Unicode name list and making the bold assumption it would have "slash" either in its name or description, there is no such character at this time.
I'm giving a tech talk about Unicode and encoding in my company, in which I'm trying to make the point that strings are always encoded, and developers should never carelessly assume that everything is 0-127 ASCII.
I have numerous examples of problems caused by mis-encoded text, but I didn't find any example of simple English text with numbers that's encoded above Unicode code point 127.
The basic English alphabet is mapped in Unicode to the same numerical value as the plain old ASCII: The range A-Z is mapped to [65-90] (or [0x41-0x5a] in hex), and [a-z] is mapped to [97-122] (hex [0x61-0x7a]).
Does the English alphabet appear elsewhere in the code charts? I do not mean circumflex letters or other Latin variants, just the plain English alphabet.
CJK characters are generally monospaced in all fonts, since that's how those languages tend to be written.
When mixing CJK and English characters, however, you run into a problem: ASCII characters do not in general have the width of a CJK character. This means that if you use ASCII, you lose the monospaced property - which may not always be desirable.
For this purpose, ｆｕｌｌｗｉｄｔｈ ｃｈａｒａｃｔｅｒｓ (U+FF00-FFEE, Wikipedia, Unicode code chart) may be used in place of "regular" characters. These have the property that they have the same width as a single CJK character.
Note, however, that fullwidth characters are virtually never used outside of a CJK context, and even in those contexts, plain ASCII is frequently used as well, when monospacing is considered unimportant.
Plenty of punctuation and symbols have code point values above U+007F:
“Hello.”
He had been given the comprehensive sixty-four-crayon Crayola box—including the gold and silver crayons—and would not let me look.
x ≠ y
The above examples use:
U+201C and U+201D — smart quotes
U+2014 — em-dash
U+2260 — not equal to
See the Unicode charts for more.
Well, if you just mean a-z and A-Z then no, there are no English characters above 127. But words like fiancé, resumé etc are sometimes spelled like that in English and use codepoints above 127.
Then there are various punctuation signs, currency symbols and so on that are above 127. Not sure if this counts as simple English text.
Can anybody please tell me what is the range of Unicode printable characters? [e.g. Ascii printable character range is \u0020 - \u007f]
See, http://en.wikipedia.org/wiki/Unicode_control_characters
You might want to look especially at C0 and C1 control character http://en.wikipedia.org/wiki/C0_and_C1_control_codes
The wiki says, the C0 control character is in the range U+0000—U+001F and U+007F (which is the same range as ASCII) and C1 control character is in the range U+0080—U+009F
other than C-control character, Unicode also has hundreds of formatting control characters, e.g. zero-width non-joiner, which makes character spacing closer, or bidirectional text control. This formatting control characters are rather scattered.
More importantly, what are you doing that requires you to know Unicode's non-printable characters? More likely than not, whatever you're trying to do is the wrong approach to solve your problem.
This is an old question, but it is still valid and I think there is more to usefully, but briefly, say on the subject than is covered by existing answers.
Unicode
Unicode defines properties for characters.
One of these properties is "General Category" which has Major classes and subclasses. The Major classes are Letter, Mark, Punctuation, Symbol, Separator, and Other.
By knowing the properties of your characters, you can decide whether you consider them printable in your particular context.
You must always remember that terms like "character" and "printable" are often difficult and have interesting edge-cases.
Programming Language support
Some programming languages assist with this problem.
For example, the Go language has a "unicode" package which provides many useful Unicode-related functions including these two:
func IsGraphic(r rune) bool
IsGraphic reports whether the rune is defined as a Graphic by Unicode. Such
characters include letters, marks, numbers, punctuation, symbols, and spaces,
from categories L, M, N, P, S, Zs.
func IsPrint(r rune) bool
IsPrint reports whether the rune is defined as printable by Go. Such
characters include letters, marks, numbers, punctuation, symbols, and
the ASCII space character, from categories L, M, N, P, S and the ASCII
space character. This categorization is the same as IsGraphic except
that the only spacing character is ASCII space, U+0020.
Notice that it says "defined as printable by Go" not by "defined as printable by Unicode". It is almost as if there are some depths the wizards at Unicode dare not plumb.
Printable
The more you learn about Unicode, the more you realise how unexpectedly diverse and unfathomably weird human writing systems are.
In particular whether a particular "character" is printable is not always obvious.
Is a zero-width space printable? When is a hyphenation point printable? Are there characters whose printability depends on their position in a word or on what characters are adjacent to them? Is a combining-character always printable?
Footnotes
ASCII printable character range is \u0020 - \u007f
No it isn't. \u007f is DEL which is not normally considered a printable character. It is, for example, associated with the keyboard key labelled "DEL" whose earliest purpose was to command the deletion of a character from some medium (display, file etc).
In fact many 8-bit character sets have many non-consecutive ranges which are non-printable. See for example C0 and C1 controls.
First, you should remove the word 'UTF8' in your question, it's not pertinent (UTF8 is just one of the encodings of Unicode, it's something orthogonal to your question).
Second: the meaning of "printable/non printable" is less clear in Unicode. Perhaps you mean a "graphical character" ; and one can even dispute if a space is printable/graphical. The non-graphical characters would consist, basically, of control characters: the range 0x00-0x0f plus some others that are scattered.
Anyway, the vast majority of Unicode characters (more than 200.000) are "graphical". But this certainly does not imply that they are printable in your environment.
It seems to me a bad idea, if you intend to generate a "random printable" unicode string, to try to include all "printable" characters.
What you should do is pick a font, and then generate a list of which Unicode characters have glyphs defined for your font. You can use a font library like freetype to test glyphs (test for FT_Get_Char_Index(...) != 0).
Taking the opposite approach to #HoldOffHunger, it might be easier to list the ranges of non-printable characters, and use not to test if a character is printable.
In the style of Regex (so if you wanted printable characters, place a ^):
[\u0000-\u0008\u000B-\u001F\u007F-\u009F\u2000-\u200F\u2028-\u202F\u205F-\u206F\u3000\uFEFF]
Which accounts for things like separator spaces and joiners
Note that unlike their answer which is a whitelist that ignores all non-latin languages, this blacklist wont permit non-printable characters just because they're in blocks with printable characters (their answer wholly includes Non-Latin, Language Supplement blocks as 'printable', even though it contains things like 'zero-width non-joiner'..).
Be aware though, that if using this or any other solution, for sanitation for example, you may want to do something more nuanced than a blanket replace.
Arguably in that case, non-breaking spaces should change to space, not be removed, and invisible separator should be replaced with comma conditionally.
Then there's invalid character ranges, either [yet] unused or reserved for encoding purposes, and language-specific variation selectors..
NB when using regular expressions, that you enable unicode awareness if it isn't that way by default (for javascript it's via /.../u).
You can tell if you have it correct by attempting to create the regular expression with some multi-byte character ranges.
For example, the above, plus the invalid character range \u{E0100}-\u{E01EF} in javascript:
/[\u0000-\u0008\u000B-\u001F\u007F-\u009F\u2000-\u200F\u2028-\u202F\u205F-\u206F\u3000\uFEFF\u{E0100}-\u{E01EF}]/u
Without u \u{E0100}-\u{E01EF} equates to \uDB40(\uDD00-\uDB40)\uDDEF, not (\uDB40\uDD00)-(\uDB40\uDDEF), and if replacing you should always enable u even when not including multbyte unicode in the regex itself as you might break surrogate pairs that exist in the text.
What characters are valid?
At present, Unicode is defined as starting from U+0000 and ending at U+10FFFF. The first block, Basic Latin, spans U+0000 to U+007F and the last block, Supplementary Private Use Area-B, spans U+100000 to 10FFFF. If you want to see all of these blocks, see here: Wikipedia.org: Unicode Block; List of Blocks.
Let's break down what's valid/invalid in the Latin Block1.
The Latin Block: TLDR
If you're interested in filtering out either invisible characters, you'll want to filter out:
U+0000 to U+0008: Control
U+000E to U+001F: Device (i.e., Control)
U+007F: Delete (Control)
U+008D to U+009F: Device (i.e., Control)
The Latin Block: Full Ranges
Here's the Latin block, broken up into smaller sections...
U+0000 to U+0008: Control
U+0009 to U+000C: Space
U+000E to U+001F: Device (i.e., Control)
U+0020: Space
U+0021 to U+002F: Symbols
U+0030 to U+0039: Numbers
U+003A to U+0040: Symbols
U+0041 to U+005A: Uppercase Letters
U+005B to U+0060: Symbols
U+0061 to U+007A: Lowercase Letters
U+007B to U+007E: Symbols
U+007F: Delete (Control)
U+0080 to U+008C: Latin1-Supplement symbols.
U+008D to U+009F: Device (i.e., Control)
U+00A0: Non-breaking space. (i.e., )
U+00A1 to U+00BF: Symbols.
U+00C0 to U+00FF: Accented characters.
The Other Blocks
Unicode is famous for supporting non-Latin character sets, so what are these other blocks? This is just a broad overview, see the wikipedia.org page for the full, complete list.
Latin1 & Latin1-Related Blocks
U+0000 to U+007F : Basic Latin
U+0080 to U+00FF : Latin-1 Supplement
U+0100 to U+017F : Latin Extended-A
U+0180 to U+024F : Latin Extended-B
Combinable blocks
U+0250 to U+036F: 3 Blocks.
Non-Latin, Language blocks
U+0370 to U+1C7F: 55 Blocks.
Non-Latin, Language Supplement blocks
U+1C80 to U+209F: 11 Blocks.
Symbol blocks
U+20A0 to U+2BFF: 22 Blocks.
Ancient Language blocks
U+2C00 to U+2C5F: 1 Block (Glagolitic).
Language Extensions blocks
U+2C60 to U+FFEF: 66 Blocks.
Special blocks
U+FFF0 to U+FFFF: 1 Block (Specials).
One approach is to render each character to a texture and manually check if it is visible. This solution excludes spaces.
I've written such a program and used it to determine there are roughly 467241 printable characters within the first 471859 code points. I've selected this number because it covers all of the first 4 Planes of Unicode, which seem to contain all printable characters. See https://en.wikipedia.org/wiki/Plane_(Unicode)
I would much like to refine my program to produce the list of ranges, but for now here's what I am working with for anyone who needs immediate answers:
https://editor.p5js.org/SamyBencherif/sketches/_OE8Y3kS9
I am posting this tool because I think this question attracts a lot of people who are looking for slightly different applications of knowing printable ranges. Hopefully this is useful, even though it does not fully answer the question.
The printable Unicode character range, excluding the hex, is 32 to 126 in the int datatype.
Unicode, stict term, has no range. Numbers can go infinite.
What you gave is not UTF8 which has 1 byte for ASCII characters.
As for the range, I believe there is no range of printable characters. It always evolves. Check the page I gave above.
Where can I get a list of ASCII codes corresponding to Japanese kanji, hiragana and katakana characters. I am doing a java function and Javascript which determines wether it is a Japanese character. What is its range in the ASCII code?
ASCII stands for American Standard Code for Information Interchange, only includes 128 characters (not all of them even printable), and is based on the needs of American use circa 1960. It includes nothing related to any Japanese characters.
I believe you want the Unicode code points for some characters, which you can lookup in the charts provided by unicode.org.
Please see my similar question regarding Kanji/Kana characters. As #coobird mentions it may be tricky to decide what range you want to check against since many Kanji overlap with Chinese characters.
In short, the Unicode ranges for hiragana and katakana are:
Hiragana: Unicode: 3040-309F
Katakana: Unicode: 30A0–30FF
If you find this answer useful please upvote #coobird's answer to my question as well.
がんばって！
Well it has been a while, but here's a link to tables of hiragana, katakana, kanji etc and their Unicodes...
http://www.rikai.com/library/kanjitables/kanji_codes.unicode.shtml
BUT, as you probably know Unicodes are hexadecimal. You can translate them into decimal numbers using Windows Calc in programmer mode and then input that number as an ASCII code and it will produce the character you want, well depending on what you're putting it into. It will in MS Wordpad and Word(not Notepad).
For example the hiragana ぁ is 3041 in Unicode. 3041 is hexadecimal and translates to 12353 in decimal. If you enter 12353 as an ASCII code into Wordpad or Word i.e hold Alt, enter 12353 on the number-pad then release Alt, it will print ぁ. The range of Japanese characters seems to be Hiragana:3040 - 309f(12352-12447 in ASCII), Katakana:30a0 - 30ff(12448-12543 in ASCII), Kanji: 4e00-4DB5(19968-19893 ASCII), so there are several ranges. There's also a half-width katakana range on that chart.
Japanese characters won't be in the ASCII range, they'll be in Unicode. What do you want, just the char value for each character?
I won't rehash the ASCII part. Just have a look at the Unicode Code Charts.
Kanji will have a Unicode "Script" property of Hani, hiragana will have a "Script" property of Hira, and katakana have a "Script" property of Kana. In Java, you can determine the "Script" property of a character using the Character.UnicodeScript class: http://docs.oracle.com/javase/7/docs/api/java/lang/Character.UnicodeScript.html I don't know if you can determine a character's "Script" property in Javascript.
Of course, most kanji are characters that are also used in Chinese; given a character like 猫, it is impossible to tell whether it's being used as a Chinese character or a Japanese character.
I think what you mean by ASCII code for Japanese is the SBCS (Single Byte Character Set) equivalent in Japanese. For Japanese you only have a MBCS (Multi-Byte Character Sets) that has a combination of single byte character and multibyte characters. So for a Japanese text file saved in MBCS you have non-Japanese characters (english letters and numbers and common non-alphanumeric characters) saved as one byte and Japanese characters saved as two bytes.
Assuming that you are not referring to UNICODE which is a uniform DBCS (Double Byte Character Set) where each character is exactly two bytes. Actually to be more correct lately UNICODE also has multiple DBCS because the character set could not accomodate other character anymore. Some UNICODE character consiste of 4 bytes already having the first two bytes as leading character.
If you are referring to The first one (MBCS) that and not UNICODE then there are a lot of Japanese character set like Shift-JIS (the more popular one). So I suggest that you search Shift-JIS character map. Although there are other Japanese character set map aside from Shift-JIS.