Fairly new to Powershell. I'm working on a script that will let a user install different pieces of software that will be needed. This process is currently being done manually and it can take 30-45 minutes to install everything that is needed. However, not everything needs to be installed on each workstation so I need flexibility for the user. This is what I have come up with so far. (Modified for brevity)
$Software1Path = "Path to installer"
$Software2Path = "Path to installer"
$Software3Path = "Path to installer"
function Software1 {
$Software1Arguments = "/S"
Start-Process -FilePath $Software1Installer $Software1Arguments -Wait
InstallOptions
}
function Software2 {
$Software2Arguments = "/silent"
Start-Process -FilePath $Software2Installer $Software2Arguments -Wait
InstallOptions
}
function Software3 {
$Software3Arguments = "/passive"
Start-Process -FilePath $Software3Installer $Software3Arguments -Wait
InstallOptions
}
function InstallOptions {
Do {
Clear-Host
Write-Host('1. Install Software1')
Write-Host('2. Install Software1')
Write-Host('3. Install Software1')
Write-Host('4. Install All Three')
Write-Host('0. Exit')
$value = Read-Host 'Input your selection (0-3)'
}
Until ($value -eq "o"){
switch ($value) {
"0" {exit}
"1" { Software 1}
"2" { Software 2}
"3" { Software 3}
"4" { Software1
Software2
Software3}
}
}
}
It does not give the desired result. I can either install one piece of software but then the script exits and I also cannot install all three. I've played with the InstallOptions and wrote it ten different ways but I am still not getting the desired result. Any suggestions?
You can call InstallOptions in a while($true) {} (as long as you keep 0 to exit) or another type of loop to make it return to the menu. If you call the menu from the software installation-function it will never get to 2 and 3 when you use "install all". Try:
$Software1Path = "Path to installer"
$Software2Path = "Path to installer"
$Software3Path = "Path to installer"
function Software1 {
$Software1Arguments = "/S"
Start-Process -FilePath $Software1Path -ArgumentList $Software1Arguments -Wait
}
function Software2 {
$Software2Arguments = "/silent"
Start-Process -FilePath $Software2Path -ArgumentList $Software2Arguments -Wait
}
function Software3 {
$Software3Arguments = "/passive"
Start-Process -FilePath $Software3Path -ArgumentList $Software3Arguments -Wait
}
function InstallOptions {
Clear-Host
Write-Host('1. Install Software1')
Write-Host('2. Install Software2')
Write-Host('3. Install Software3')
Write-Host('4. Install All Three')
Write-Host('0. Exit')
$value = Read-Host 'Input your selection (0-3)'
switch ($value) {
"0" {exit}
"1" { Software1}
"2" { Software2}
"3" { Software3}
"4" {
Software1
Software2
Software3
}
}
}
#Start the train
while($true) { InstallOptions }
You might also want to clean this up. Ex. $Sofware1Path is outside the function while the $Software1Arguments are inside. For simple installations, you could clean this up to use ex. a csv-stored array (can be read stored in a separate file if needed). Something like:
$Installations = #(#"
Name,Step,Path,Arguments
Software1,1,"c:\Install Files\Product1\Setup.exe",/S
Software2,2,"c:\Install Files\Product2\SetupPart2.exe",/silent
Software2,1,"c:\Install Files\Product2\Setup.exe","/silent ""space test with ,"""
Software3,1,"c:\Install Files\Product3\Setup.exe",/passive "space test"
"# | ConvertFrom-Csv)
function InstallSoftware ($Name) {
Write-Host "Installing $Name..."
$Installations | Where-Object { $_.Name -eq $Name } | Sort-Object { $_.Step -as [int] } | ForEach-Object {
ExecuteStep -Path $_.Path -Arguments $_.Arguments
}
}
function ExecuteStep ($Path, $Arguments) {
Write-Host "Executing '$Path' '$Arguments'"
Start-Process -FilePath $Path -ArgumentList $Arguments -Wait
}
function Menu {
$UniqueSoftware = $Installations | Select-Object -ExpandProperty Name -Unique | Sort-Object
$NumOfSoftware = $UniqueSoftware.Count
#Generate menu
Clear-Host
for($i=0;$i -lt $NumOfSoftware; $i++) {
Write-Host ("{0}. Install {1}" -f ($i+1), $Software[$i].Name)
}
Write-Host ("{0}. Install all" -f ($NumOfSoftware+1))
Write-Host "0. Exit"
do {
#Get input
$value = (Read-Host "Input your selection (0-$($NumOfSoftware+1))") -as [int]
#Execute
switch ($value) {
0 { exit }
{ $_ -gt 0 -and $_ -le $NumOfSoftware } { InstallSoftware -Name $UniqueSoftware[($_-1)] }
($NumOfSoftware+1) { 0..($NumOfSoftware-1) | ForEach-Object { InstallSoftware -Name $UniqueSoftware[($_)] } }
default { Write-Host "Invalid input..." }
}
#Validate input or retry
} until ( $value -ge 0 -and $value -le $NumOfSoftware+1 )
}
#Start the train
while($true) { Menu }
I've searched but did not find any answer.
The task is register one dll using Powershell ps1, followed by other lines of scripts. I don't want to be interrupted by the dialog, so added the /s parameter. But now the result information is ignored, no matter succeed or fail.
I want the result displayed in console. But how?
Launch regsvr32.exe /s with Start-Process -PassThru and inspect the ExitCode property:
$regsvrp = Start-Process regsvr32.exe -ArgumentList "/s C:\path\to\your.dll" -PassThru
$regsvrp.WaitForExit(5000) # Wait (up to) 5 seconds
if($regsvrp.ExitCode -ne 0)
{
Write-Warning "regsvr32 exited with error $($regsvrp.ExitCode)"
}
Here is a more complete full powershell cmdlet with pipeline support.
function Register-Dll
{
<#
.SYNOPSIS
A function that uses the utility regsvr32.exe utility to register a file
.PARAMETER Path
The file path
.PARAMETER Unregister
when specified, unregisters instead of registers
#>
[CmdletBinding()]
param (
[ValidateScript({ Test-Path -Path $_ -PathType 'Leaf' })]
[Parameter(Mandatory=$true,ValueFromPipeline=$true,ValueFromPipeLineByPropertyName=$true)]
[Alias("FullName")]
[string[]]$Path,
[Alias("u")]
[switch]$Unregister
)
begin {
if ($Unregister)
{
$regflag = "-u "
}
else
{
$regflag = ""
}
[int]$NumFailed=0
$RegExitCodes = #{
0="SUCCESS";
1="FAIL_ARGS - Invalid Argument";
2="FAIL_OLE - OleInitialize Failed";
3="FAIL_LOAD - LoadLibrary Failed";
4="FAIL_ENTRY - GetProcAddress failed";
5="FAIL_REG - DllRegisterServer or DllUnregisterServer failed.";
}
}
process {
foreach ($p in $path)
{
try
{
$regsvrp = Start-Process regsvr32.exe -ArgumentList "/s $regflag <code>$p</code>" -Wait -NoNewWindow -PassThru
if($regsvrp.ExitCode -ne 0)
{
$NumFailed++
Write-Error "regsvr32 $regflag for $p exited with error $($regsvrp.ExitCode) - $($RegExitCodes[$regsvrp.ExitCode])"
}
} catch {
$NumFailed++
Write-Error $_.Exception.Message
}
}
}
end {
if ($NumFailed -gt 0)
{
if ($Unregister)
{
$mode = "unregister"
}
else
{
$mode = "register"
}
Write-Error "Failed to $mode $NumFailed dll's, see previous errors for detail"
}
}
}
Usage:
function Register-MyAppDll
{
param(
[Parameter(Mandatory=$true,ParameterSetName="Both")]
[switch]$ReRegister,
[Parameter(Mandatory=$true,ParameterSetName="UnregisterOnly")]
[Alias("u")]
[switch]$UnRegister,
[Parameter(Mandatory=$true,ParameterSetName="RegisterOnly")]
[Alias("r")]
[switch]$Register
)
$RegOptions = #()
if ($UnRegister -or $ReRegister) { $RegOptions += #{Unregister=$true} }
if ($Register -or $ReRegister) { $RegOptions += #{} }
$dlltoregister = Get-ChildItem "C:\MyApp\bin" -Filter *.dll | where {$_ -notmatch '^interop'}
foreach ($RegOpt in $RegOptions)
{
$dlltoregister | Register-Dll #RegOpt
}
}
Register-MyAppDll -UnRegister
Register-MyAppDll -Register
Register-MyAppDll -ReRegister
Enjoy :)
Thank you Justin! I'm using this script and it works great.
There seems to be a typo in the following line of code:
$regsvrp = Start-Process regsvr32.exe -ArgumentList "/s $regflag <code>$p</code>" -Wait -NoNewWindow -PassThru
The code tag shoudn't be there. I changed it to the following with added escaped double quotes around path to support spaces in paths:
$regsvrp = Start-Process regsvr32.exe -ArgumentList "/s $regflag `"$p`"" -Wait -NoNewWindow -PassThru
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 5 years ago.
Improve this question
What essential things (functions, aliases, start up scripts) do you have in your profile?
I often find myself needing needing some basic agregates to count/sum some things., I've defined these functions and use them often, they work really nicely at the end of a pipeline :
#
# useful agregate
#
function count
{
BEGIN { $x = 0 }
PROCESS { $x += 1 }
END { $x }
}
function product
{
BEGIN { $x = 1 }
PROCESS { $x *= $_ }
END { $x }
}
function sum
{
BEGIN { $x = 0 }
PROCESS { $x += $_ }
END { $x }
}
function average
{
BEGIN { $max = 0; $curr = 0 }
PROCESS { $max += $_; $curr += 1 }
END { $max / $curr }
}
To be able to get time and path with colors in my prompt :
function Get-Time { return $(get-date | foreach { $_.ToLongTimeString() } ) }
function prompt
{
# Write the time
write-host "[" -noNewLine
write-host $(Get-Time) -foreground yellow -noNewLine
write-host "] " -noNewLine
# Write the path
write-host $($(Get-Location).Path.replace($home,"~").replace("\","/")) -foreground green -noNewLine
write-host $(if ($nestedpromptlevel -ge 1) { '>>' }) -noNewLine
return "> "
}
The following functions are stolen from a blog and modified to fit my taste, but ls with colors is very nice :
# LS.MSH
# Colorized LS function replacement
# /\/\o\/\/ 2006
# http://mow001.blogspot.com
function LL
{
param ($dir = ".", $all = $false)
$origFg = $host.ui.rawui.foregroundColor
if ( $all ) { $toList = ls -force $dir }
else { $toList = ls $dir }
foreach ($Item in $toList)
{
Switch ($Item.Extension)
{
".Exe" {$host.ui.rawui.foregroundColor = "Yellow"}
".cmd" {$host.ui.rawui.foregroundColor = "Red"}
".msh" {$host.ui.rawui.foregroundColor = "Red"}
".vbs" {$host.ui.rawui.foregroundColor = "Red"}
Default {$host.ui.rawui.foregroundColor = $origFg}
}
if ($item.Mode.StartsWith("d")) {$host.ui.rawui.foregroundColor = "Green"}
$item
}
$host.ui.rawui.foregroundColor = $origFg
}
function lla
{
param ( $dir=".")
ll $dir $true
}
function la { ls -force }
And some shortcuts to avoid really repetitive filtering tasks :
# behave like a grep command
# but work on objects, used
# to be still be allowed to use grep
filter match( $reg )
{
if ($_.tostring() -match $reg)
{ $_ }
}
# behave like a grep -v command
# but work on objects
filter exclude( $reg )
{
if (-not ($_.tostring() -match $reg))
{ $_ }
}
# behave like match but use only -like
filter like( $glob )
{
if ($_.toString() -like $glob)
{ $_ }
}
filter unlike( $glob )
{
if (-not ($_.tostring() -like $glob))
{ $_ }
}
This iterates through a scripts PSDrive and dot-sources everything that begins with "lib-".
### ---------------------------------------------------------------------------
### Load function / filter definition library
### ---------------------------------------------------------------------------
Get-ChildItem scripts:\lib-*.ps1 | % {
. $_
write-host "Loading library file:`t$($_.name)"
}
To setup my Visual Studio build environment from PowerShell I took the VsVars32 from here. and use it all the time.
###############################################################################
# Exposes the environment vars in a batch and sets them in this PS session
###############################################################################
function Get-Batchfile($file)
{
$theCmd = "`"$file`" & set"
cmd /c $theCmd | Foreach-Object {
$thePath, $theValue = $_.split('=')
Set-Item -path env:$thePath -value $theValue
}
}
###############################################################################
# Sets the VS variables for this PS session to use
###############################################################################
function VsVars32($version = "9.0")
{
$theKey = "HKLM:SOFTWARE\Microsoft\VisualStudio\" + $version
$theVsKey = get-ItemProperty $theKey
$theVsInstallPath = [System.IO.Path]::GetDirectoryName($theVsKey.InstallDir)
$theVsToolsDir = [System.IO.Path]::GetDirectoryName($theVsInstallPath)
$theVsToolsDir = [System.IO.Path]::Combine($theVsToolsDir, "Tools")
$theBatchFile = [System.IO.Path]::Combine($theVsToolsDir, "vsvars32.bat")
Get-Batchfile $theBatchFile
[System.Console]::Title = "Visual Studio " + $version + " Windows Powershell"
}
start-transcript. This will write out your entire session to a text file. Great for training new hires on how to use Powershell in the environment.
My prompt contains:
$width = ($Host.UI.RawUI.WindowSize.Width - 2 - $(Get-Location).ToString().Length)
$hr = New-Object System.String #('-',$width)
Write-Host -ForegroundColor Red $(Get-Location) $hr
Which gives me a divider between commands that's easy to see when scrolling back. It also shows me the current directory without using horizontal space on the line that I'm typing on.
For example:
C:\Users\Jay ----------------------------------------------------------------------------------------------------------
[1] PS>
# ----------------------------------------------------------
# msdn search for win32 APIs.
# ----------------------------------------------------------
function Search-MSDNWin32
{
$url = 'http://search.msdn.microsoft.com/?query=';
$url += $args[0];
for ($i = 1; $i -lt $args.count; $i++) {
$url += '+';
$url += $args[$i];
}
$url += '&locale=en-us&refinement=86&ac=3';
Open-IE($url);
}
# ----------------------------------------------------------
# Open Internet Explorer given the url.
# ----------------------------------------------------------
function Open-IE ($url)
{
$ie = new-object -comobject internetexplorer.application;
$ie.Navigate($url);
$ie.Visible = $true;
}
I rock a few functions, and since I'm a module author I typically load a console and desperately need to know what's where.
write-host "Your modules are..." -ForegroundColor Red
Get-module -li
Die hard nerding:
function prompt
{
$host.UI.RawUI.WindowTitle = "ShellPower"
# Need to still show the working directory.
#Write-Host "You landed in $PWD"
# Nerd up, yo.
$Str = "Root#The Matrix"
"$str> "
}
The mandatory anything I can PowerShell I will functions go here...
# Explorer command
function Explore
{
param
(
[Parameter(
Position = 0,
ValueFromPipeline = $true,
Mandatory = $true,
HelpMessage = "This is the path to explore..."
)]
[ValidateNotNullOrEmpty()]
[string]
# First parameter is the path you're going to explore.
$Target
)
$exploration = New-Object -ComObject shell.application
$exploration.Explore($Target)
}
I am STILL an administrator so I do need...
Function RDP
{
param
(
[Parameter(
Position = 0,
ValueFromPipeline = $true,
Mandatory = $true,
HelpMessage = "Server Friendly name"
)]
[ValidateNotNullOrEmpty()]
[string]
$server
)
cmdkey /generic:TERMSRV/$server /user:$UserName /pass:($Password.GetNetworkCredential().Password)
mstsc /v:$Server /f /admin
Wait-Event -Timeout 5
cmdkey /Delete:TERMSRV/$server
}
Sometimes I want to start explorer as someone other than the logged in user...
# Restarts explorer as the user in $UserName
function New-Explorer
{
# CLI prompt for password
taskkill /f /IM Explorer.exe
runas /noprofile /netonly /user:$UserName explorer
}
This is just because it's funny.
Function Lock-RemoteWorkstation
{
param(
$Computername,
$Credential
)
if(!(get-module taskscheduler))
{
Import-Module TaskScheduler
}
New-task -ComputerName $Computername -credential:$Credential |
Add-TaskTrigger -In (New-TimeSpan -Seconds 30) |
Add-TaskAction -Script `
{
$signature = #"
[DllImport("user32.dll", SetLastError = true)]
public static extern bool LockWorkStation();
"#
$LockWorkStation = Add-Type -memberDefinition $signature -name "Win32LockWorkStation" -namespace Win32Functions -passthru
$LockWorkStation::LockWorkStation() | Out-Null
} | Register-ScheduledTask TestTask -ComputerName $Computername -credential:$Credential
}
I also have one for me, since Win + L is too far away...
Function llm # Lock Local machine
{
$signature = #"
[DllImport("user32.dll", SetLastError = true)]
public static extern bool LockWorkStation();
"#
$LockWorkStation = Add-Type -memberDefinition $signature -name "Win32LockWorkStation" -namespace Win32Functions -passthru
$LockWorkStation::LockWorkStation() | Out-Null
}
A few filters? I think so...
filter FileSizeBelow($size){if($_.length -le $size){ $_ }}
filter FileSizeAbove($size){if($_.Length -ge $size){$_}}
I also have a few I can't post yet, because they're not done but they're basically a way to persist credentials between sessions without writing them out as an encrypted file.
Here's my not so subtle profile
#==============================================================================
# Jared Parsons PowerShell Profile (jaredp#rantpack.org)
#==============================================================================
#==============================================================================
# Common Variables Start
#==============================================================================
$global:Jsh = new-object psobject
$Jsh | add-member NoteProperty "ScriptPath" $(split-path -parent $MyInvocation.MyCommand.Definition)
$Jsh | add-member NoteProperty "ConfigPath" $(split-path -parent $Jsh.ScriptPath)
$Jsh | add-member NoteProperty "UtilsRawPath" $(join-path $Jsh.ConfigPath "Utils")
$Jsh | add-member NoteProperty "UtilsPath" $(join-path $Jsh.UtilsRawPath $env:PROCESSOR_ARCHITECTURE)
$Jsh | add-member NoteProperty "GoMap" #{}
$Jsh | add-member NoteProperty "ScriptMap" #{}
#==============================================================================
#==============================================================================
# Functions
#==============================================================================
# Load snapin's if they are available
function Jsh.Load-Snapin([string]$name) {
$list = #( get-pssnapin | ? { $_.Name -eq $name })
if ( $list.Length -gt 0 ) {
return;
}
$snapin = get-pssnapin -registered | ? { $_.Name -eq $name }
if ( $snapin -ne $null ) {
add-pssnapin $name
}
}
# Update the configuration from the source code server
function Jsh.Update-WinConfig([bool]$force=$false) {
# First see if we've updated in the last day
$target = join-path $env:temp "Jsh.Update.txt"
$update = $false
if ( test-path $target ) {
$last = [datetime] (gc $target)
if ( ([DateTime]::Now - $last).Days -gt 1) {
$update = $true
}
} else {
$update = $true;
}
if ( $update -or $force ) {
write-host "Checking for winconfig updates"
pushd $Jsh.ConfigPath
$output = #(& svn update)
if ( $output.Length -gt 1 ) {
write-host "WinConfig updated. Re-running configuration"
cd $Jsh.ScriptPath
& .\ConfigureAll.ps1
. .\Profile.ps1
}
sc $target $([DateTime]::Now)
popd
}
}
function Jsh.Push-Path([string] $location) {
go $location $true
}
function Jsh.Go-Path([string] $location, [bool]$push = $false) {
if ( $location -eq "" ) {
write-output $Jsh.GoMap
} elseif ( $Jsh.GoMap.ContainsKey($location) ) {
if ( $push ) {
push-location $Jsh.GoMap[$location]
} else {
set-location $Jsh.GoMap[$location]
}
} elseif ( test-path $location ) {
if ( $push ) {
push-location $location
} else {
set-location $location
}
} else {
write-output "$loctaion is not a valid go location"
write-output "Current defined locations"
write-output $Jsh.GoMap
}
}
function Jsh.Run-Script([string] $name) {
if ( $Jsh.ScriptMap.ContainsKey($name) ) {
. $Jsh.ScriptMap[$name]
} else {
write-output "$name is not a valid script location"
write-output $Jsh.ScriptMap
}
}
# Set the prompt
function prompt() {
if ( Test-Admin ) {
write-host -NoNewLine -f red "Admin "
}
write-host -NoNewLine -ForegroundColor Green $(get-location)
foreach ( $entry in (get-location -stack)) {
write-host -NoNewLine -ForegroundColor Red '+';
}
write-host -NoNewLine -ForegroundColor Green '>'
' '
}
#==============================================================================
#==============================================================================
# Alias
#==============================================================================
set-alias gcid Get-ChildItemDirectory
set-alias wget Get-WebItem
set-alias ss select-string
set-alias ssr Select-StringRecurse
set-alias go Jsh.Go-Path
set-alias gop Jsh.Push-Path
set-alias script Jsh.Run-Script
set-alias ia Invoke-Admin
set-alias ica Invoke-CommandAdmin
set-alias isa Invoke-ScriptAdmin
#==============================================================================
pushd $Jsh.ScriptPath
# Setup the go locations
$Jsh.GoMap["ps"] = $Jsh.ScriptPath
$Jsh.GoMap["config"] = $Jsh.ConfigPath
$Jsh.GoMap["~"] = "~"
# Setup load locations
$Jsh.ScriptMap["profile"] = join-path $Jsh.ScriptPath "Profile.ps1"
$Jsh.ScriptMap["common"] = $(join-path $Jsh.ScriptPath "LibraryCommon.ps1")
$Jsh.ScriptMap["svn"] = $(join-path $Jsh.ScriptPath "LibrarySubversion.ps1")
$Jsh.ScriptMap["subversion"] = $(join-path $Jsh.ScriptPath "LibrarySubversion.ps1")
$Jsh.ScriptMap["favorites"] = $(join-path $Jsh.ScriptPath "LibraryFavorites.ps1")
$Jsh.ScriptMap["registry"] = $(join-path $Jsh.ScriptPath "LibraryRegistry.ps1")
$Jsh.ScriptMap["reg"] = $(join-path $Jsh.ScriptPath "LibraryRegistry.ps1")
$Jsh.ScriptMap["token"] = $(join-path $Jsh.ScriptPath "LibraryTokenize.ps1")
$Jsh.ScriptMap["unit"] = $(join-path $Jsh.ScriptPath "LibraryUnitTest.ps1")
$Jsh.ScriptMap["tfs"] = $(join-path $Jsh.ScriptPath "LibraryTfs.ps1")
$Jsh.ScriptMap["tab"] = $(join-path $Jsh.ScriptPath "TabExpansion.ps1")
# Load the common functions
. script common
. script tab
$global:libCommonCertPath = (join-path $Jsh.ConfigPath "Data\Certs\jaredp_code.pfx")
# Load the snapin's we want
Jsh.Load-Snapin "pscx"
Jsh.Load-Snapin "JshCmdlet"
# Setup the Console look and feel
$host.UI.RawUI.ForegroundColor = "Yellow"
if ( Test-Admin ) {
$title = "Administrator Shell - {0}" -f $host.UI.RawUI.WindowTitle
$host.UI.RawUI.WindowTitle = $title;
}
# Call the computer specific profile
$compProfile = join-path "Computers" ($env:ComputerName + "_Profile.ps1")
if ( -not (test-path $compProfile)) { ni $compProfile -type File | out-null }
write-host "Computer profile: $compProfile"
. ".\$compProfile"
$Jsh.ScriptMap["cprofile"] = resolve-path ($compProfile)
# If the computer name is the same as the domain then we are not
# joined to active directory
if ($env:UserDomain -ne $env:ComputerName ) {
# Call the domain specific profile data
write-host "Domain $env:UserDomain"
$domainProfile = join-path $env:UserDomain "Profile.ps1"
if ( -not (test-path $domainProfile)) { ni $domainProfile -type File | out-null }
. ".\$domainProfile"
}
# Run the get-fortune command if JshCmdlet was loaded
if ( get-command "get-fortune" -ea SilentlyContinue ) {
get-fortune -timeout 1000
}
# Finished with the profile, go back to the original directory
popd
# Look for updates
Jsh.Update-WinConfig
# Because this profile is run in the same context, we need to remove any
# variables manually that we don't want exposed outside this script
i add this function so that i can see disk usage easily:
function df {
$colItems = Get-wmiObject -class "Win32_LogicalDisk" -namespace "root\CIMV2" `
-computername localhost
foreach ($objItem in $colItems) {
write $objItem.DeviceID $objItem.Description $objItem.FileSystem `
($objItem.Size / 1GB).ToString("f3") ($objItem.FreeSpace / 1GB).ToString("f3")
}
}
apropos.
Although I think this has been superseded by a recent or upcoming release.
##############################################################################
## Search the PowerShell help documentation for a given keyword or regular
## expression.
##
## Example:
## Get-HelpMatch hashtable
## Get-HelpMatch "(datetime|ticks)"
##############################################################################
function apropos {
param($searchWord = $(throw "Please specify content to search for"))
$helpNames = $(get-help *)
foreach($helpTopic in $helpNames)
{
$content = get-help -Full $helpTopic.Name | out-string
if($content -match $searchWord)
{
$helpTopic | select Name,Synopsis
}
}
}
I keep a little bit of everything. Mostly, my profile sets up all the environment (including calling scripts to set up my .NET/VS and Java development environment).
I also redefine the prompt() function with my own style (see it in action), set up several aliases to other scripts and commands. and change what $HOME points to.
Here's my complete profile script.
Set-PSDebug -Strict
You will benefit i you ever searched for a stupid Typo eg. outputting $varsometext instead $var sometext
##############################################################################
# Get an XPath Navigator object based on the input string containing xml
function get-xpn ($text) {
$rdr = [System.IO.StringReader] $text
$trdr = [system.io.textreader]$rdr
$xpdoc = [System.XML.XPath.XPathDocument] $trdr
$xpdoc.CreateNavigator()
}
Useful for working with xml, such as output from svn commands with --xml.
This creates a scripts: drive and adds it to your path. Note, you must create the folder yourself. Next time you need to get back to it, just type "scripts:" and hit enter, just like any drive letter in Windows.
$env:path += ";$profiledir\scripts"
New-PSDrive -Name Scripts -PSProvider FileSystem -Root $profiledir\scripts
This will add snapins you have installed into your powershell session. The reason you may want to do something like this is that it's easy to maintain, and works well if you sync your profile across multiple systems. If a snapin isn't installed, you won't see an error message.
---------------------------------------------------------------------------
Add third-party snapins
---------------------------------------------------------------------------
$snapins = #(
"Quest.ActiveRoles.ADManagement",
"PowerGadgets",
"VMware.VimAutomation.Core",
"NetCmdlets"
)
$snapins | ForEach-Object {
if ( Get-PSSnapin -Registered $_ -ErrorAction SilentlyContinue ) {
Add-PSSnapin $_
}
}
I put all my functions and aliases in separate script files and then dot source them in my profile:
. c:\scripts\posh\jdh-functions.ps1
The function to view the entire history of typed command (Get-History, and his alias h show default only 32 last commands):
function ha {
Get-History -count $MaximumHistoryCount
}
You can see my PowerShell profile at http://github.com/jamesottaway/windowspowershell
If you use Git to clone my repo into your Documents folder (or whatever folder is above 'WindowsPowerShell' in your $PROFILE variable), you'll get all of my goodness.
The main profile.ps1 sets the subfolder with the name Addons as a PSDrive, and then finds all .ps1 files underneath that folder to load.
I quite like the go command, which stores a dictionary of shorthand locations to visit easily. For example, go vsp will take me to C:\Visual Studio 2008\Projects.
I also like overriding the Set-Location cmdlet to run both Set-Location and Get-ChildItem.
My other favourite is being able to do a mkdir which does Set-Location xyz after running New-Item xyz -Type Directory.
amongst many other things:
function w {
explorer .
}
opens an explorer window in the current directory
function startover {
iisreset /restart
iisreset /stop
rm "C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\*.*" -recurse -force -Verbose
iisreset /start
}
gets rid of everything in my temporary asp.net files (useful for working on managed code that has dependencies on buggy unmanaged code)
function edit($x) {
. 'C:\Program Files (x86)\Notepad++\notepad++.exe' $x
}
edits $x in notepad++
I actually keep mine on github.
Function funcOpenPowerShellProfile
{
Notepad $PROFILE
}
Set-Alias fop funcOpenPowerShellProfile
Only a sagaciously-lazy individual would tell you that fop is so much easier to type than Notepad $PROFILE at the prompt, unless, of course, you associate "fop" with a 17th century English ninny.
If you wanted, you could take it a step further and make it somewhat useful:
Function funcOpenPowerShellProfile
{
$fileProfileBackup = $PROFILE + '.bak'
cp $PROFILE $fileProfileBackup
PowerShell_ISE $PROFILE # Replace with Desired IDE/ISE for Syntax Highlighting
}
Set-Alias fop funcOpenPowerShellProfile
For satisfying survivalist-paranoia:
Function funcOpenPowerShellProfile
{
$fileProfilePathParts = #($PROFILE.Split('\'))
$fileProfileName = $fileProfilePathParts[-1]
$fileProfilePathPartNum = 0
$fileProfileHostPath = $fileProfilePathParts[$fileProfilePathPartNum] + '\'
$fileProfileHostPathPartsCount = $fileProfilePathParts.Count - 2
# Arrays start at 0, but the Count starts at 1; if both started at 0 or 1,
# then a -1 would be fine, but the realized discrepancy is 2
Do
{
$fileProfilePathPartNum++
$fileProfileHostPath = $fileProfileHostPath + `
$fileProfilePathParts[$fileProfilePathPartNum] + '\'
}
While
(
$fileProfilePathPartNum -LT $fileProfileHostPathPartsCount
)
$fileProfileBackupTime = [string](date -format u) -replace ":", ""
$fileProfileBackup = $fileProfileHostPath + `
$fileProfileBackupTime + ' - ' + $fileProfileName + '.bak'
cp $PROFILE $fileProfileBackup
cd $fileProfileHostPath
$fileProfileBackupNamePattern = $fileProfileName + '.bak'
$fileProfileBackups = #(ls | Where {$_.Name -Match $fileProfileBackupNamePattern} | `
Sort Name)
$fileProfileBackupsCount = $fileProfileBackups.Count
$fileProfileBackupThreshold = 5 # Change as Desired
If
(
$fileProfileBackupsCount -GT $fileProfileBackupThreshold
)
{
$fileProfileBackupsDeleteNum = $fileProfileBackupsCount - `
$fileProfileBackupThreshold
$fileProfileBackupsIndexNum = 0
Do
{
rm $fileProfileBackups[$fileProfileBackupsIndexNum]
$fileProfileBackupsIndexNum++;
$fileProfileBackupsDeleteNum--
}
While
(
$fileProfileBackupsDeleteNum -NE 0
)
}
PowerShell_ISE $PROFILE
# Replace 'PowerShell_ISE' with Desired IDE (IDE's path may be needed in
# '$Env:PATH' for this to work; if you can start it from the "Run" window,
# you should be fine)
}
Set-Alias fop funcOpenPowerShellProfile
Jeffrey Snover's Start-NewScope because re-launching the shell can be a drag.
I never got comfortable with the diruse options, so:
function Get-FolderSizes { # poor man's du
[cmdletBinding()]
param(
[parameter(mandatory=$true)]$Path,
[parameter(mandatory=$false)]$SizeMB,
[parameter(mandatory=$false)]$ExcludeFolders,
[parameter(mandatory=$false)][switch]$AsObject
) #close param
# http://blogs.technet.com/b/heyscriptingguy/archive/2013/01/05/weekend-scripter-sorting-folders-by-size.aspx
# uses Christoph Schneegans' Find-Files https://schneegans.de/windows/find-files/ because "gci -rec" follows junctions in "special" folders
$pathCheck = test-path $path
if (!$pathcheck) { Write-Error "Invalid path. Wants gci's -path parameter."; return }
if (!(Get-Command Find-Files)) { Write-Error "Required function Find-Files not found"; return }
$fso = New-Object -ComObject scripting.filesystemobject
$parents = Get-ChildItem $path -Force | where { $_.PSisContainer -and $ExcludeFolders -notContains $_.name -and !$_.LinkType }
$folders = Foreach ($folder in $parents)
{
$getFolder = $fso.getFolder( $folder.fullname.tostring() )
if (!$getFolder.Size)
{
#for "special folders" like appdata
# maybe "-Attributes !ReparsePoint" works in v6? https://stackoverflow.com/a/59952913/
# what about https://superuser.com/a/650476/ ?
# abandoned because it follows junctions, distorting results # $length = gci $folder.FullName -Recurse -Force -EA SilentlyContinue | Measure -Property Length -Sum
$length = Find-Files $folder.FullName -EA SilentlyContinue | Measure -Property Length -Sum -EA SilentlyContinue
$sizeMBs = "{0:N0}" -f ($length.Sum /1mb)
} #close if size property is null
else { $sizeMBs = "{0:N0}" -f ($getFolder.size /1mb) }
New-Object -TypeName psobject -Property #{
Name = $getFolder.Path
SizeMB = $sizeMBs
} #close new obj property
} #close foreach folder
#here's the output
$foldersObj = $folders | Sort #{E={[decimal]$_.SizeMB}} -Descending | ? {[Decimal]$_.SizeMB -gt $SizeMB}
if (!$AsObject) { $foldersObj | Format-Table -AutoSize } else { $foldersObj }
#calculate the total including contents
$sum = $folders | Select -Expand SizeMB | Measure -Sum | Select -Expand Sum
$sum += ( gci $path | where {!$_.psIsContainer} | Measure -Property Length -Sum | Select -Expand Sum ) / 1mb
$sumString = "{0:n2}" -f ($sum /1kb)
$sumString + " GB total"
} #end function
Set-Alias gfs Get-FolderSizes
function Find-Files
{
<# by Christoph Schneegans https://schneegans.de/windows/find-files/ - used in Get-FolderSizes aka gfs
.SYNOPSIS
Lists the contents of a directory. Unlike Get-ChildItem, this function does not recurse into symbolic links or junctions in order to avoid infinite loops.
#>
param (
[Parameter( Mandatory=$false )]
[string]
# Specifies the path to the directory whose contents are to be listed. By default, the current working directory is used.
$LiteralPath = (Get-Location),
[Parameter( Mandatory=$false )]
# Specifies a filter that is applied to each file or directory. Wildcards ? and * are supported.
$Filter,
[Parameter( Mandatory=$false )]
[boolean]
# Specifies if file objects should be returned. By default, all file system objects are returned.
$File = $true,
[Parameter( Mandatory=$false )]
[boolean]
# Specifies if directory objects should be returned. By default, all file system objects are returned.
$Directory = $true,
[Parameter( Mandatory=$false )]
[boolean]
# Specifies if reparse point objects should be returned. By default, all file system objects are returned.
$ReparsePoint = $true,
[Parameter( Mandatory=$false )]
[boolean]
# Specifies if the top directory should be returned. By default, all file system objects are returned.
$Self = $true
)
function Enumerate( [System.IO.FileSystemInfo] $Item ) {
$Item;
if ( $Item.GetType() -eq [System.IO.DirectoryInfo] -and ! $Item.Attributes.HasFlag( [System.IO.FileAttributes]::ReparsePoint ) ) {
foreach ($ChildItem in $Item.EnumerateFileSystemInfos() ) {
Enumerate $ChildItem;
}
}
}
function FilterByName {
process {
if ( ( $Filter -eq $null ) -or ( $_.Name -ilike $Filter ) ) {
$_;
}
}
}
function FilterByType {
process {
if ( $_.GetType() -eq [System.IO.FileInfo] ) {
if ( $File ) { $_; }
} elseif ( $_.Attributes.HasFlag( [System.IO.FileAttributes]::ReparsePoint ) ) {
if ( $ReparsePoint ) { $_; }
} else {
if ( $Directory ) { $_; }
}
}
}
$Skip = if ($Self) { 0 } else { 1 };
Enumerate ( Get-Item -LiteralPath $LiteralPath -Force ) | Select-Object -Skip $Skip | FilterByName | FilterByType;
} # end function find-files
The most valuable bit above is Christoph Schneegans' Find-Files https://schneegans.de/windows/find-files
For pointing at stuff:
function New-URLfile {
param( [parameter(mandatory=$true)]$Target, [parameter(mandatory=$true)]$Link )
if ($target -match "^\." -or $link -match "^\.") {"Full paths plz."; break}
$content = #()
$header = '[InternetShortcut]'
$content += $header
$content += "URL=" + $target
$content | out-file $link
ii $link
} #end function
function New-LNKFile {
param( [parameter(mandatory=$true)]$Target, [parameter(mandatory=$true)]$Link )
if ($target -match "^\." -or $link -match "^\.") {"Full paths plz."; break}
$WshShell = New-Object -comObject WScript.Shell
$Shortcut = $WshShell.CreateShortcut($link)
$Shortcut.TargetPath = $target
$shortCut.save()
} #end function new-lnkfile
Poor man's grep? For searching large txt files.
function Search-TextFile {
param(
[parameter(mandatory=$true)]$File,
[parameter(mandatory=$true)]$SearchText
) #close param
if ( !(Test-path $File) )
{
Write-Error "File not found: $file"
return
}
$fullPath = Resolve-Path $file | select -Expand ProviderPath
$lines = [System.IO.File]::ReadLines($fullPath)
foreach ($line in $lines) { if ($line -match $SearchText) {$line} }
} #end function Search-TextFile
Set-Alias stf Search-TextFile
Lists programs installed on a remote computer.
function Get-InstalledProgram { [cmdletBinding()] #http://blogs.technet.com/b/heyscriptingguy/archive/2011/11/13/use-powershell-to-quickly-find-installed-software.aspx
param( [parameter(mandatory=$true)]$Comp,[parameter(mandatory=$false)]$Name )
$keys = 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall','SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall'
TRY { $RegBase = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine,$Comp) }
CATCH {
$rrSvc = gwmi win32_service -comp $comp -Filter {name='RemoteRegistry'}
if (!$rrSvc) {"Unable to connect. Make sure that this computer is on the network, has remote administration enabled, `nand that both computers are running the remote registry service."; break}
#Enable and start RemoteRegistry service
if ($rrSvc.State -ne 'Running') {
if ($rrSvc.StartMode -eq 'Disabled') { $null = $rrSvc.ChangeStartMode('Manual'); $undoMe2 = $true }
$null = $rrSvc.StartService() ; $undoMe = $true
} #close if rrsvc not running
else {"Unable to connect. Make sure that this computer is on the network, has remote administration enabled, `nand that both computers are running the remote registry service."; break}
$RegBase = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine,$Comp)
} #close if failed to connect regbase
$out = #()
foreach ($key in $keys) {
if ( $RegBase.OpenSubKey($Key) ) { #avoids errors on 32bit OS
foreach ( $entry in $RegBase.OpenSubKey($Key).GetSubkeyNames() ) {
$sub = $RegBase.OpenSubKey( ($key + '\' + $entry) )
if ($sub) { $row = $null
$row = [pscustomobject]#{
Name = $RegBase.OpenSubKey( ($key + '\' + $entry) ).GetValue('DisplayName')
InstallDate = $RegBase.OpenSubKey( ($key + '\' + $entry) ).GetValue('InstallDate')
Version = $RegBase.OpenSubKey( ($key + '\' + $entry) ).GetValue('DisplayVersion')
} #close row
$out += $row
} #close if sub
} #close foreach entry
} #close if key exists
} #close foreach key
$out | where {$_.name -and $_.name -match $Name}
if ($undoMe) { $null = $rrSvc.StopService() }
if ($undoMe2) { $null = $rrSvc.ChangeStartMode('Disabled') }
} #end function
Going meta, spreading the gospel, whatnot
function Copy-ProfilePS1 ($Comp,$User) {
if (!$User) {$User = $env:USERNAME}
$targ = "\\$comp\c$\users\$User\Documents\WindowsPowershell\"
if (Test-Path $targ)
{
$cmd = "copy /-Y $profile $targ"
cmd /c $cmd
} else {"Path not found! $targ"}
} #end function CopyProfilePS1
$MaximumHistoryCount=1024
function hist {get-history -count 256 | %{$_.commandline}}
New-Alias which get-command
function guidConverter([byte[]] $gross){ $GUID = "{" + $gross[3].ToString("X2") + `
$gross[2].ToString("X2") + $gross[1].ToString("X2") + $gross[0].ToString("X2") + "-" + `
$gross[5].ToString("X2") + $gross[4].ToString("X2") + "-" + $gross[7].ToString("X2") + `
$gross[6].ToString("X2") + "-" + $gross[8].ToString("X2") + $gross[9].ToString("X2") + "-" +`
$gross[10].ToString("X2") + $gross[11].ToString("X2") + $gross[12].ToString("X2") + `
$gross[13].ToString("X2") + $gross[14].ToString("X2") + $gross[15].ToString("X2") + "}" $GUID }
I keep my profile empty. Instead, I have folders of scripts I can navigate to load functionality and aliases into the session. A folder will be modular, with libraries of functions and assemblies. For ad hoc work, I'll have a script to loads aliases and functions. If I want to munge event logs, I'd navigate to a folder scripts\eventlogs and execute
PS > . .\DotSourceThisToLoadSomeHandyEventLogMonitoringFunctions.ps1
I do this because I need to share scripts with others or move them from machine to machine. I like to be able to copy a folder of scripts and assemblies and have it just work on any machine for any user.
But you want a fun collection of tricks. Here's a script that many of my "profiles" depend on. It allows calls to web services that use self signed SSL for ad hoc exploration of web services in development. Yes, I freely mix C# in my powershell scripts.
# Using a target web service that requires SSL, but server is self-signed.
# Without this, we'll fail unable to establish trust relationship.
function Set-CertificateValidationCallback
{
try
{
Add-Type #'
using System;
public static class CertificateAcceptor{
public static void SetAccept()
{
System.Net.ServicePointManager.ServerCertificateValidationCallback = AcceptCertificate;
}
private static bool AcceptCertificate(Object sender,
System.Security.Cryptography.X509Certificates.X509Certificate certificate,
System.Security.Cryptography.X509Certificates.X509Chain chain,
System.Net.Security.SslPolicyErrors policyErrors)
{
Console.WriteLine("Accepting certificate and ignoring any SSL errors.");
return true;
}
}
'#
}
catch {} # Already exists? Find a better way to check.
[CertificateAcceptor]::SetAccept()
}
Great question. Because I deal with several different PowerShell hosts, I do a little logging in each of several profiles, just to make the context of any other messages clearer. In profile.ps1, I currently only have that, but I sometimes change it based on context:
if ($PSVersionTable.PsVersion.Major -ge 3) {
Write-Host "Executing $PSCommandPath"
}
My favorite host is the ISE, in Microsoft.PowerShellIse_profile.ps1, I have:
if ($PSVersionTable.PsVersion.Major -ge 3) {
Write-Host "Executing $PSCommandPath"
}
if ( New-PSDrive -ErrorAction Ignore One FileSystem `
(Get-ItemProperty hkcu:\Software\Microsoft\SkyDrive UserFolder).UserFolder) {
Write-Host -ForegroundColor Green "PSDrive One: mapped to local OneDrive/SkyDrive folder"
}
Import-Module PSCX
$PSCX:TextEditor = (get-command Powershell_ISE).Path
$PSDefaultParameterValues = #{
"Get-Help:ShowWindow" = $true
"Help:ShowWindow" = $true
"Out-Default:OutVariable" = "0"
}
#Script Browser Begin
#Version: 1.2.1
Add-Type -Path 'C:\Program Files (x86)\Microsoft Corporation\Microsoft Script Browser\System.Windows.Interactivity.dll'
Add-Type -Path 'C:\Program Files (x86)\Microsoft Corporation\Microsoft Script Browser\ScriptBrowser.dll'
Add-Type -Path 'C:\Program Files (x86)\Microsoft Corporation\Microsoft Script Browser\BestPractices.dll'
$scriptBrowser = $psISE.CurrentPowerShellTab.VerticalAddOnTools.Add('Script Browser', [ScriptExplorer.Views.MainView], $true)
$scriptAnalyzer = $psISE.CurrentPowerShellTab.VerticalAddOnTools.Add('Script Analyzer', [BestPractices.Views.BestPracticesView], $true)
$psISE.CurrentPowerShellTab.VisibleVerticalAddOnTools.SelectedAddOnTool = $scriptBrowser
#Script Browser End
Of everything not already listed, Start-Steroids has to be my favorite, except for maybe Start-Transcript.
(http://www.powertheshell.com/isesteroids2-2/)