There is a vertical line in the Editor. When I run code, the results go to the next line once this vertical line is reached.
Right now I get this:
3433 3344 3434 3434 3434 3434/
343 4645 345345 56546 35345/
3656 546546 3534 3553 5645
I want the console output to be this
3433 3344 3434 3434 3434 3434 343 4645 345345 56546 35345 3656 546546 3534 3553 5645
I want my code output to take up the entire width of my screen.
I'm using IPython within Spyder(Ptyhon 3.6) from Anaconda
If you are printing a numpy array, you can set your "linewidth" in this way:
import numpy as np
l_w = 1000 #The number of elements to display before truncation in console
np.set_printoptions(linewidth=l_w)
(Spyder maintainer here) Unfortunately, right now (May/2018) it is not possible to configure the width output text can take in our consoles.
Related
If I type 12345 and set the cursor between 3 and 4 and start typing this will overwrite the 4 and 5. What I want is to be able to eg. add 77 inbetween and the output will be: 123 774 5. Is there any way I can do this?
My code is essentially just:
<MaskedTextField
label="With input mask"
mask="999 999 999"
maskChar=""
/>
Codesandbox: https://codesandbox.io/s/keen-sunset-khegc?file=/src/App.js
I want to import a csv file (data.csv) which is structured as follows
Area,MTU,Biomass MW,Lignite MW
CTA|DE(50Hertz),"01.01.2015 00:00 - 01.01.2015 00:15 (CET)","1227","6485"
CTA|DE(50Hertz),"01.01.2015 00:15 - 01.01.2015 00:30 (CET)","","6421"
CTA|DE(50Hertz),"01.01.2015 00:30 - 01.01.2015 00:45 (CET)","1230","n/e"
CTA|DE(50Hertz),"01.01.2015 00:45 - 01.01.2015 01:00 (CET)","N/A","6299"
I've tried to use textscan which works pretty well, but the process stops once the empty quotation marks are reached. The argument 'EmptyValue',0 does not work.
file = fopen('data.csv');
data = textscan(file, '%q %q "%f" "%f"', 'Delimiter', ',',...
'headerlines', 1,'TreatAsEmpty', {'N/A', 'n/e'}, 'EmptyValue',0);
fclose(file);
Any idea, on how to import the whole file.
textscan(file,'%q%q%q%q%[^\n\r]','Delimiter',',','headerlines',1);
worked just fine for me. You get values like: "01.01.2015 00:00 - 01.01.2015 00:15 (CET)" But those are trivial to write a separate parser for. Don't try to do it all in one step. That will cause you much pain and suffering. Break it up into simple single steps.
Also, I highly recommend right clicking your file in the "Current Folder" window in matlab, then selecting "Import Data" This makes importing CSV (or tab separated, or fixed width data files) trivial.
I need help to format below file with some calculation for a particular row having some pattern
hnt 1 454 454
gft 10 8844 8853
step 2 23 24
str 10 Check sum(00244-00240) 420 434
dert 03 14 16
ghh 33 Check sum(12366-12361) 8008 8046
I need to have four column file by performing subtraction for the row having text "check sum".
I wish to remove the text "Check sum" and then subtract the numbers given in ( ). For e.g. (00244-00240) will be subtracted and will be having value '4' and this '4' will be added to left column which has the value '10'.
so now this value will become '14'. After this calculation the other value on that row will shift left column wise. Thus making four columns table instead of six columns
The desired output is
hnt 1 454 454
gft 10 8844 8853
step 2 23 24
str 14 420 434
dert 03 14 16
ghh 38 8008 8046
I am new to shell scrip and appreciate your help to get above desired output using awk or sed or both. I am also ok if this can be achieved without using this awk and sed and by using other command in unix shell script
Perl can do the parsing and the addition:
perl -pe 's/(\d+)\s+Check sum\((\d+)([+-]\d+)\)/$1+$2+$3/e' file
hnt 1 454 454
gft 10 8844 8853
step 2 23 24
str 14 420 434
dert 03 14 16
ghh 38 8008 8046
If you want the output to look prettier, pipe the result through column -t
You can try this one liner:
sed "s/Check//;s/sum//;s/(//;s/)//" filename|awk '/-/{sub(/-/," ");for (i=1;i<=NF;i++);{calc=$3-$4;$2=$2+calc;$3="";$4=""}}1'
Note:
This answer does not retain the original white-spaces for the rows having calculation performed
I'm running a bunch (~320) computational chemistry experiments and I need to pull a small amount of the data out of each of the files so that I can do some work on it in MatLab.
I'm pretty sure I can use sed to make this work, but try as I might I don't seem to be able to do so.
I need all of the data starting at the line beginning with "1 1" and ending with the line starting with "33 33".
I J FI(I,J) k(I,J) K(I,J)
1 1 -337.13279 -0.06697 -0.00430
2 2 3804.89120 8.52972 0.54787
3 3 3195.69653 6.01702 0.38648
4 4 3189.18684 5.99253 0.38490
5 5 3183.73262 5.97205 0.38359
6 6 3174.47525 5.93737 0.38136
7 7 3167.88746 5.91275 0.37978
8 8 1628.80868 1.56311 0.10040
9 9 1623.56055 1.55306 0.09975
10 10 1518.21620 1.35806 0.08723
11 11 1476.93012 1.28520 0.08255
12 12 1341.24087 1.05990 0.06808
13 13 1312.30373 1.01466 0.06517
14 14 1264.73004 0.94242 0.06053
15 15 1185.62592 0.82822 0.05320
16 16 1175.54013 0.81419 0.05230
17 17 1170.41211 0.80710 0.05184
18 18 1090.20196 0.70027 0.04498
19 19 1039.29190 0.63639 0.04088
20 20 1015.00116 0.60699 0.03899
21 21 1005.05773 0.59516 0.03823
22 22 986.55965 0.57345 0.03683
23 23 917.65537 0.49615 0.03187
24 24 842.93089 0.41863 0.02689
25 25 819.00146 0.39520 0.02538
26 26 758.39720 0.33888 0.02177
27 27 697.11173 0.28632 0.01839
28 28 628.75684 0.23292 0.01496
29 29 534.75856 0.16849 0.01082
30 30 499.35579 0.14692 0.00944
31 31 422.01320 0.10493 0.00674
32 32 409.30255 0.09870 0.00634
33 33 227.12411 0.03039 0.00195
33 2nd derivatives larger than 0.371D-04 over 561
MatLab is not a fan of text, so I'd like to not use text delimiters (though there are some in the header of this data section) and keep the data contained to only the numeric lines.
The data files contain a lot of other numbers as well, so I need to match the occurrence of "1 1" at the start of the line and "33 33" as the end of the copy. These 'indices' exist only in this block of info.
I attempted to use
% sed -n /"1 1"/,/"33 33"/p input.file > output.file
But I get a WHOLE BUNCH of data in the output file as it copies everything that shows up between any "1" and "33"
Is there any way to do what I'm looking for?
Also, I'm using the tcsh as that is what my servers run.
How about using awk
awk '$1=="1"&&$2=="1"{t=1};t;$1=="33"&&$2=="33"{t=0}' file
Recommand by #mklement0, if there is only one block, to avoid processing the remainder of the file you can update the command to:
awk '$1=="1"&&$2=="1"{t=1};t;$1=="33"&&$2=="33"{exit}' file
Your problem is twofold. First, there are two blanks between the ones, but your regex only allows for one (judging from the now indented code). Second, you are probably not precise enough; the /1 1/ pattern matches 11 11, for example, and 111 111 and so on.
So, you should consider:
sed -n -e '/^ *1 *1 /,/^33 *33 /p' -e '/^33 33 /q' input.file > output.file
The patterns are anchored to the start of line by the ^ (caret). The numbers are separated by one or more blanks (there are other, longer-winded ways of writing that in standard sed; the + option is not standard sed but is widely available). And the numbers are terminated by a blank. The chances are that the first expression alone will give you what you want. The second expression terminates the search early when it recognizes the 33 33 input line, which can save a significant amount of file I/O and hence processing time if the input file is big enough.
If the lines with ID numbers in the hundreds have some different format, then it should be fairly straight-forward to tweak the regexes to match what is used. If the data contains tabs instead of (or as well as) blanks, you can tweak the regexes to manage that, too.
If you data is all formatted exactly the same as this file, then you can use sed to just read the 3rd through the 35th line (rows 1 1 - 33 33). This is a lot easier than parsing the values, but does require that the files have a standard format:
sed -n 3,35p data.txt
Another cheap way would be to grep for only numeric lines, and take only the first 33:
grep "^[0-9 ][0-9 .-]*$" data.txt | head -n 33
I am trying to import certain data into my SAS datset using this piece of code:
Data Names_And_More;
Infile 'C:\Users\Admin\Desktop\Torrent Downloads\SAS 9.1.3 Portable\Names_and_More.txt';
Input Name & $20.
Phone : $20.
Height & $10.
Mixed & $10.;
run;
The data in the file is as below:
Roger Cody (908)782-1234 5ft. 10in. 50 1/8
Thomas Jefferson (315)848-8484 6ft. 1in. 23 1/2
Marco Polo (800)123-4567 5Ft. 6in. 40
Brian Watson (518)355-1766 5ft. 10in 89 3/4
Michael DeMarco (445)232-2233 6ft. 76 1/3
I have been trying to learn SAS and while going through Ron Cody's book Learning SAS by example,I found to import the kind of data above, we can use 'the ampersand (&) informat modifier. The ampersand, like the colon,says to use the supplied informat, but the delimiter is now two or more blanks instead of just one.' (Ron's words, not mine). However, while importing this the result (dataset) is as follows:
Name Phone Height Mixed
Roger Cody (908)782- Thomas Jefferson Marco Polo
Also, for further details the SAS log is as follows:
419 Data Names_And_More;
420 Infile 'C:\Users\Admin\Desktop\Torrent Downloads\SAS 9.1.3 Portable\Names_and_More.txt';
421 Input Name & $20.
422 Phone : $20.
423 Height & $10.
424 Mixed & $10.
425 ;run;
NOTE:
The infile 'C:\Users\Admin\Desktop\Torrent Downloads\SAS 9.1.3 Portable\Names_and_More.txt' is:
File Name=C:\Users\Admin\Desktop\Torrent Downloads\SAS 9.1.3 Portable\Names_and_More.txt,
RECFM=V,LRECL=256
NOTE:
LOST CARD.
Name=Brian Watson (518)35 Phone=Michael Height=DeMarco (4 Mixed= ERROR=1 N=2
NOTE: 5 records were read from the infile 'C:\Users\Admin\Desktop\Torrent Downloads\SAS 9.1.3
Portable\Names_and_More.txt'.
The minimum record length was 37.
The maximum record length was 47.
NOTE: SAS went to a new line when INPUT statement reached past the end of a line.
NOTE: The data set WORK.NAMES_AND_MORE has 1 observations and 4 variables.
NOTE: DATA statement used (Total process time):
real time 0.17 seconds
cpu time 0.14 seconds
I am looking for some help with this one. It'd be great if someone can explain what exactly is happening, what am I doing wrong and how to correct this error.
Thanks
The answer is in the explanation in Ron Cody's book. & means you need two spaces to separate varaibles; so you need a second space after the name (and other fields with &).
Wrong:
Roger Cody (908)782-1234 5ft. 10in. 50 1/8
Right:
Roger Cody (908)782-1234 5ft. 10in. 50 1/8