I have a server on OVH and I'm trying to send some mail to my Gmail address using sendmail.
I installed sendmail with apt-get on debian, and echo "Subject: test" | /usr/sbin/sendmail -v mymail#gmail.com works. However Gmail puts the mail in the spam folder and says the mail is not authenticated.
I have no knowledge of how email works and from what I've seen I could use SPF or DKIM to provide authentication, but it seems it requires admin access to ovh DNS servers.
What would be the easiest way, using only admin access to the server that sends mails, to make sure emails sent from it are not marked as spam ?
Thanks
There are no easy way. That's the simple answer.
Google Mail is fighting spam every second, every day, all year. To get mail delivered directly to the inbox requires time and patience and there are no shortcuts. If there where, spammers would have it way to easy!
You are very correct that Google's SMTP servers will ask you to beef up your SMTP mail headers to include better authentication and security. There's no way around it if you want to be on good terms with Google's SMTP servers.
Here is a list of things to consider
SPF (Must have, also to defend spam sent in your name)
DKIM (Must have, this is somewhat a step up from SPF)
ESMTP (Google likes it when you talk to them encrypted)
Bulk headers (Use them if it's bulk, no reason to lie!)
Unsubscribe headers (Use them if you are sending out maillist content)
SMTP relay's with nice Senderscores (Easy access to the inbox, but cost)
SMTP relay's with good reputation (Easy access to the inbox, but cost)
Feedback loop headers/setup (If you send large amount of mails)
Only use "warmed up" SMTP relay servers (Mostly used by bulk senders)
Reverse DNS to match HELO/HELO (Mismatch can make problems)
Static IP (It's a given)
As you can see it's no simple task to "just" send an email to Google and expect it to be passed along to the users Inbox without getting targeted as spam.
Most of the options above requires extensive server knowlagde or that your hosting provider supports it. You need to have access to change your own DNS records but also the SMTP server that you send your mail from needs to be setup with the things in advance.
Now to the:
"How to send emails to Google Mail that always land in the inbox for dummies"
Well you basically buy your way into the inbox. Use SMTP services like Mailchimp, Amazon AWS-SMS (Simple Mail Service) many if not all of these services have already setup DKIM, SPF and are on good terms with Google. They do however have many rules and what and what not to do so if you don't follow the rules they will close your account right away.
Related
I am using mailgun.com for occassional mass-mailings. Would it be possible to also use it for sending personal emails from me and my wife? The specific problem is that email errors (e.g. "Recipient not found on the server") are only available in the mailgun console and I'd like for them to be received as an error emails sent back to the sender (as is the case with "standard" personal email services). Is it possible to set this up at mailgun.com?
Alternatively, is there a cheap (or even free) SMTP server available for sending emails from the custom domain I own?
(Note that RECEIVING emails to our domain is not a problem, we have that solved using email redirection on my domain.)
Detailed explanation of our setup and reasoning: Behind the scenes, we are both using personail gmail accounts (e.g. me#gmail.com and wife#gmail.com) but we don't advertise these anywhere and our "public" email addresses are me#mydomain.com and wife#mydomain.com. Mydomain.com uses Cloudflare email redirection to redirect our incoming emails back to our Gmail inboxes. We used "Send mail as" GMail feature to send emails as "me#mydomain.com" and "wife#mydomain.com" through smtp.gmail.com but this solution requires us to have "Less secure apps" enabled on our Google accounts and Google seems to be phasing this solution out. The fact that our "real" Gmail addresses are visible in the email headers is not a problem for us.
Originally, we've used free "legacy" Google Workspace accounts on mydomain.com but those are now also being phased out by Google. So we are looking for a SMTP server.
Answering my own question:
I have found that smtp2go.com (which provides very similar services to mailgun.com) provides this option. Your SMTP account can be configured (in the "Advanced" tab) so that bounced email reports are delivered back to the sender's mailbox (or to different mailbox). Additionally, smtp2go's services are free if you send less than 1000 emails monthly so this seems like perfect solution to my problem.
I spent weeks on researching the net on wich solution should I use in order to correctly send emails from my websites hosted on shared hosting accounts, but the more I read - the more confused I get.
So this is my situation!
I have among others, an ecommerce website built on OpenCart, on a shared hosting account and a few email addresses in cPanel, like sales#mydomain.com, newsletter#mydomain.com, contact#mydomain.com, etc. These email accounts are also accessible via roundCube by the user at email.mydomain.com and via IMAP\SMTP on their email clients like Thunderbird.
The website has these email addresses set up and it uses (at leas Opencart does) php mail() to send emails for events (new order, contact, quote, etc).
Since last year or so, providers like Yahoo keeps banning the server's IP address and emails get bounced back with failure messages, Gmail recipients get them in Spam folder, etc. I almost monthly ask my hosting provider to change IP address, ask Yahoo or spam services to unblock the IP address, do tests, etc and I don't even have a large number of emails going, like 100 per month, most of them are Ask for a quote wich are plain text messages.
In other words, it isn't working.
What I am looking for what solution should I use to send emails from websites hosted on shared accounts, that is transactional emails and newsletter emails without upsetting Yahoo,Google,etc. subdomains? external smtp service? configure email accounts in a specific way? What do you guys use ?
If you are able to add extensions to Opencart on your shared host, you may want to consider adding the phpmailer extension (http://www.opencart.com/index.php?route=extension/extension/info&extension_id=3932). This will enable you to send all outgoing mail from Opencart via phpmailer, which can be setup to send mail through a remote SMTP relay (such as smtp.gmail.com, sendgrid, or some other remote SMTP relay). A reputable remote SMTP relay will probably be less likely to be blacklisted than your host's SMTP relay that the php mail() command is currently using.
We are building a system that is, effectively, an email/calendar/contact client.
Users will provide us with their email address password (or other auth, eg oauth) and we will connect to their underlying email system.
"underlying systems" include:
Microsoft Exchange / Office365
GMail
Yahoo Mail
Apple email
Generic IMAP
Each of these systems have subtle (and not so subtle) differences in their APIs, especially to access calendar & contact data. Thus we need to know what provider the user is using.
But we would rather not ASK the user. We would like to figure it out (and at, least reduce the choices) automatically.
I've looked around for something that already implements this but have not found anything. I know it's mostly possible because Windows Phone does it pretty well (just enter username/pw and it does the right thing).
Before I dive in and start writing my own I want to ensure I'm not wasting my time if someone's already done it in an excellent way.
Know of anything like this? For this project prefer C#/.NET.
[EDIT: Adding potential algo]
Potential Algorithm:
Given email address & password
Extract domain name from email address
Try Exchange autodiscover. If successful done.
Use DNS MX records to find smtp host.
Do SMTP EHLO
Gmail responds with "250-mx.google.com at your service"
So if we see a "google.com" we are done.
Yahoo responds with 250-mta1257.mail.sk1.yahoo.com
So if we see a "yahoo.com" in the response we are done.
Apple responds with 250-xxxxxx-mac.com
So if we see a "mac.com" in the response we are done.
If none of the above
IMAP?
...
[EDIT: 5/18]
I built a prototype that uses methods that don't require auth (e.g. just MX/SMTP sluthing). Give it a try: http://bit.ly/KLZKxD
Algorithm seems reasonable. You will get best results running from unfiltered server (meaning it has direct SMTP outbound / doesn't run through a proxy). If running from client (mobile/tablet/desktop), then no guarantees as some ISP's pass SMTP through a proxy relay hence EHLO response is only for proxy.
You may want to do a port check for servers to verify expected protocol support (just a TCP connect may be sufficient but protocol handshake is preferable). Additionally, best to build up a database of verified SMTP and IMAP server mappings as there can be split names (e.g. smtp.domain.com and mail.domain.com) - discovering SMTP is easy, discovering outbound server(s) which usually also means calendar/contacts server, not so much (except for Exchange but only if autodiscovery is configured correctly).
If you can get your users to approve and assuming you have their username/password, you could try connecting to SMTP via MX record and sending an email back to your own address then checking through headers for useful info about the server (needs to be authenticated to relay). Users could alternatively reply to an email you generate in order to get the same server info.
Also ensure that you do your own DNS query and try each MX record or all primaries -- if the principal MX is down or DNS is poorly configured for equal weighting, you could end up hitting a smarthost / backup which may just be a dumb SMTP relay / store-and-forward and not give you the correct response.
TL;DR: No quick solution but a cascaded algorithm that trys and fails different solutions until one works / gives an expected result should work.
Most devices can auto detect the service by parsing the Whole e-mail address. Xyz#gmail.com would obviously be a gmail account. So for Apple, Gmail, Yahoo, Live, Hotmail etc you can easily program for.
For other domains, including custom, you can try this: http://www.exclamationsoft.com/exclamationsoft/netmailbot/help/website/HowToFindTheSMTPMailServerForAnEmailAddress.html
You can detect Google Apps For Your Domain accounts by examining the domain's MX records. If the primary MX record is ASPMX.L.GOOGLE.com, then it's GMail.
I created an implementation of this that has been used widely with some success: https://github.com/tig/Email2Calendar
This is used by both milelogr.com and freebusy.io.
My application will be used in a manner that the user is remote from his computer running the application, receiving data via text messages sent periodically from the PC. Im sending the text message via email, using the number#carrierdomain.com. To simplify determining the user's smtp server, I've been sending the message using the destination phone carrier's smtp, instead of the whatever may or may not be available at the PC. This has worked so far with AT&T and T-Mobile, but not Verizon, as they have discontinued their smtp service.
I'm using mailsend v1.15 http://www.muquit.com/muquit/software/mailsend/mailsend.html
but Im open to alternatives.
I do have a less than ideal workaround, which is to use google or hotmail's smtp, but that requires a login/pass.
If I can send the text through regular email, using outlook, it works. I've looked at outlooks smtp logs, but that doesn't really help.
If its not being sent to a Verizon smtp server, how does it get routed, and is it something that my application can use?
Is there a reliable way to send email without having the senders smtp?
Theoretically, any smtp server can send your e-mail. However, due to the overwhelming amount of spaming on the internet, pretty much every isp has locked down their smtp server and will not allow anonymous relaying of e-mail.
If you do have the outlook client on the box you are sending the e-mail you can look at using one of the Outlook APIs:
http://msdn.microsoft.com/en-us/library/gg608200.aspx
to send the e-mail message. You are using the outlook configuration then and don't have to worry about it your code.
As long as an SMTP server is configured to allow relay from a remote domain then you can use it send email from/to virtually any address. There are downsides, however, to using any SMTP server to send an email from a specific domain - the most notable of which is that the recipient's domain will likely flag the message as spam because the domain of the SMTP server is different from that of the sender's email address.
There are other non-email APIs that can be used to send text messages, if that is something you're willing to consider. Check out:
Tropo (http://www.tropo.com)
Zeep Mobile (http://www.zeepmobile.com)
Best of luck to you.
Impossible. SMTP is the Simple Mail Transfer Protocol, without this is impossible to access to another account with Email format. You can make a php mail where you don't need to have smtp, but your access will be limited, not all ESP / ISP will allow you to delivery those emails, because they need to identify you using your SMTP and MX Lookup (Reverse MX A records) from your server. It exists more ways, but are 100% SPAMMERS and HACKERS methods and I don't recommend to use them.
Am developing and newsletter email software in vb.net for a friend, and he has asked me to add option to send email using dns servers,
How do i send an emai using dns server without smtp or imap?
Send email "using DNS servers" still uses SMTP. And it's generally a bad idea. Here's what it's about:
Usually, an email app (your own, Outlook, etc.) send mail using SMTP or similar protocol to a configured mail server. It could be a company's own server, or an ISP's server, or something like that. The mail may pass through various outgoing mail servers on its way out of an organisation, but at some point it hits a "boundary server" (There are pretty names for all these different types of server, but they're not important right now.)
This boundary server uses DNS to find the recipient's mail server and then sends the message (using SMTP) to that server. (I have omitted the details on purpose)
Sending email "using DNS" means that your app acts as a boundary server. It uses DNS to find the recipient's mail server and then sends the mail directly - rather than using any outgoing servers.
It's a bad idea for two reasons.
More and more ISPs block SMTP traffic that doesn't pass through their outgoing servers
More and more incoming servers validate the boundary server using various techniques. Your app is not likely to be accepted by these servers
Both of these issues are anti-spam countermeasures, so using this technique makes you look like a spammer, leaves many of your messages blocked, and is likely to get your IP address blacklisted.
Hopefully you can explain this to your friend so that they will understand that the "normal" way of sending mail is the only way to ensure that they don't get listed as a spammer.