I think I may be the only one experiencing this issue.
I, today, updated my eclipse install to version 2020-03 (4.15.0). I am also attempting to write a very simple JUnit 5 test for a new method I'm working on.
When I run my test, right now just a basic stub, I get the following error:
java.lang.SecurityException: class "org.junit.platform.commons.PreconditionViolationException"'s signer information does not match signer information of other classes in the same package
at java.base/java.lang.ClassLoader.checkCerts(ClassLoader.java:1150)
at java.base/java.lang.ClassLoader.preDefineClass(ClassLoader.java:905)
at java.base/java.lang.ClassLoader.defineClass(ClassLoader.java:1014)
at java.base/java.security.SecureClassLoader.defineClass(SecureClassLoader.java:151)
at java.base/jdk.internal.loader.BuiltinClassLoader.defineClass(BuiltinClassLoader.java:821)
at java.base/jdk.internal.loader.BuiltinClassLoader.findClassOnClassPathOrNull(BuiltinClassLoader.java:719)
at java.base/jdk.internal.loader.BuiltinClassLoader.loadClassOrNull(BuiltinClassLoader.java:642)
at java.base/jdk.internal.loader.BuiltinClassLoader.loadClass(BuiltinClassLoader.java:600)
at java.base/jdk.internal.loader.ClassLoaders$AppClassLoader.loadClass(ClassLoaders.java:178)
at java.base/java.lang.ClassLoader.loadClass(ClassLoader.java:521)
at org.eclipse.jdt.internal.junit5.runner.JUnit5TestLoader.createUnfilteredTest(JUnit5TestLoader.java:75)
at org.eclipse.jdt.internal.junit5.runner.JUnit5TestLoader.createTest(JUnit5TestLoader.java:66)
at org.eclipse.jdt.internal.junit5.runner.JUnit5TestLoader.loadTests(JUnit5TestLoader.java:53)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:526)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:770)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:464)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:210)
I also see the following dialog
My run Configuration is:
I've tried all major junit-jupiter (aggregator) releases back to 5.5.0 all resulting in the same issue.
I've tried this solution. However, that question deals with a class not found issue. I also tried that same solution using using junit-platform-commons version 1.6.1. no change.
However, I can run maven configuration with -Dtest=DeaFileListTest test the the tests run.
My test case is simple, I instantiate an object that has the method I want to test and then my test.
import static org.hamcrest.MatcherAssert.assertThat;
import static org.hamcrest.Matchers.empty;
import static org.hamcrest.Matchers.not;
import java.io.IOException;
import java.util.List;
import javax.ws.rs.core.Response;
import org.junit.jupiter.api.AfterAll;
import org.junit.jupiter.api.BeforeAll;
import org.junit.jupiter.api.Test;
import com.mfgweb.FileRepo;
class DeaFileListTest {
private static FileRepo filerepo;
private static Response response;
#BeforeAll
static void setUpBeforeClass() throws Exception {
filerepo = new FileRepo();
response = filerepo.getDeaFiles();
}
#AfterAll
static void tearDownAfterClass() throws Exception {
response = null;
filerepo = null;
}
#Test
public void deaFileListIsNotEmptyTest() throws IOException {
#SuppressWarnings ( "unchecked" )
List< String > files = ( List< String > )response.getEntity();
assertThat( files, not( empty() ) );
}
}
So I am curious why I'm receiving the Security Exception when I run the test in eclipse, yet Maven seems to execute them fine.
This error comes out when running the test.
I do not know how to solve it. they do not run in browser
Could not instantiate new WebDriver instance of type class
org.openqa.selenium.chrome.ChromeDriver
The code itself:
package com.automation.correo;
import org.junit.Test;
import org.junit.runner.RunWith;
import org.openqa.selenium.WebDriver;
import net.serenitybdd.junit.runners.SerenityRunner;
import net.thucydides.core.annotations.Managed;
import net.thucydides.core.annotations.Steps;
import pasos.pasoscorreo;
#RunWith(SerenityRunner.class)
public class testcorreo {
#Managed(driver = "chrome", uniqueSession = true)
WebDriver driver;
#Steps
pasoscorreo buyer;
#Test
public void Ingresar_Gmail_Valida_Correo_NoLeido() throws InterruptedException {
buyer.Abrir_Gmail();
buyer.Ingresar_usairio("Ingsisacontreras");
buyer.Ingresar_password("fdfdfd;");
buyer.Buscar_correo("Alejandro Rendon ");
buyer.UsuarioCon_correo();
buyer.Ultimo_correo();
buyer.Descripcion_Correo();
driver.close();
}
I had same issue during the first run of serenity-cucumber4-smoketests. The problem was in the chromedriver.exe version located in the skeleton. After I replaced it to a new one supported by my company, the test had passed. But same issue might happen if the path to the driver is not selected correctly.
I am using Flyway 5.0.5 and I am unable to create a java (SpringJdbcMigration) with autowired properties... They end up null.
The closest thing I can find is this question: Spring beans are not injected in flyway java based migration
The answer mentions it being fixed in Flyway 5 but the links are dead.
What am I missing?
I struggled with this for a long time due to my JPA dependency. I am going to edit the title of my question slightly to reflect this...
#Autowired beans are instantiated from the ApplicationContext. We can create a different bean that is ApplicationContextAware and use that to "manually wire" our beans for use in migrations.
A quite clean approach can be found here. Unfortunately, this throws an uncaught exception (specifically, ApplicationContext is null) when using JPA. Luckily, we can solve this by using the #DependsOn annotation and force flyway to run after the ApplicationContext has been set.
First we'll need the SpringUtility from avehlies/spring-beans-flyway2 above.
package com.mypackage;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.context.ApplicationContext;
import org.springframework.context.ApplicationContextAware;
import org.springframework.stereotype.Component;
#Component
public class SpringUtility implements ApplicationContextAware {
#Autowired
private static ApplicationContext applicationContext;
public void setApplicationContext(final ApplicationContext applicationContext) {
this.applicationContext = applicationContext;
}
/*
Get a class bean from the application context
*/
public static <T> T getBean(final Class clazz) {
return (T) applicationContext.getBean(clazz);
}
/*
Return the application context if necessary for anything else
*/
public static ApplicationContext getContext() {
return applicationContext;
}
}
Then, configure a flywayInitializer with a #DependsOn for springUtility. I extended the FlywayAutoConfiguration here hoping to keep the autoconfiguration functionality. This mostly seems to have worked for me, except that turning off flyway in my gradle.build file no longer works, so I had to add the #Profile("!integration") to prevent it from running during my tests. Other than that the autoconfiguration seems to work for me but admittedly I've only run one migration. Hopefully someone will correct me if I am wrong.
package com.mypackage;
import org.flywaydb.core.Flyway;
import org.springframework.boot.autoconfigure.flyway.FlywayMigrationInitializer;
import org.springframework.boot.autoconfigure.flyway.FlywayAutoConfiguration.FlywayConfiguration;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Profile;
import org.springframework.context.annotation.Primary;
import org.springframework.context.annotation.DependsOn;
import com.mypackage.SpringUtility;
#Configuration
#Profile("!integration")
class MyFlywayConfiguration extends FlywayConfiguration {
#Primary
#Bean(name = "flywayInitializer")
#DependsOn("springUtility")
public FlywayMigrationInitializer flywayInitializer(Flyway flyway){
return super.flywayInitializer(flyway);
//return new FlywayMigrationInitializer(flyway, null);
}
}
And just to complete the example, here is a migration:
package db.migration;
import org.flywaydb.core.api.migration.spring.BaseSpringJdbcMigration;
import org.springframework.jdbc.core.JdbcTemplate;
import org.springframework.stereotype.Component;
import com.mypackage.repository.AccountRepository;
import com.mypackage.domain.Account;
import com.mypackage.SpringUtility;
import java.util.List;
public class V2__account_name_ucase_firstname extends BaseSpringJdbcMigration {
private AccountRepository accountRepository = SpringUtility.getBean(AccountRepository.class);
public void migrate(JdbcTemplate jdbcTemplate) throws Exception {
List<Account> accounts = accountRepository.findAll();
for (Account account : accounts) {
String firstName = account.getFirstName();
account.setFirstName(firstName.substring(0, 1).toUpperCase() + firstName.substring(1));
account = accountRepository.save(account);
}
}
}
Thanks to avehlies on github, Andy Wilkinson on stack overflow and OldIMP on github for helping me along the way.
In case you are using more recent versions of Flyway, then extend BaseJavaMigration instead of BaseSpringJdbcMigration as the later is deprecated. Also, take a look at the below two comments by the user Wim Deblauwe.
The functionality hasn't made it into Flyway yet. It's being tracked by this issue. At the time of writing that issue is open and assigned to the 5.1.0 milestone.
Seems the updated answer provided by #mararn1618 is under documented on the official documentation, so I will provide a working setup here. Thanks to #mararn1618 for guiding in that direction.
Disclaimer, it's written in Kotlin :)
First you need a configuration for loading the migration classes, in Spring Boot (and perhaps Spring) you need either an implementation of FlywayConfigurationCustomizer or a setup of FlywayAutoConfiguration.FlywayConfiguration. Only the first is tested, but both should work
Configuration a, tested
import org.flywaydb.core.api.configuration.FluentConfiguration
import org.flywaydb.core.api.migration.JavaMigration
import org.springframework.beans.factory.annotation.Autowired
import org.springframework.boot.autoconfigure.flyway.FlywayConfigurationCustomizer
import org.springframework.context.ApplicationContext
import org.springframework.stereotype.Component
#Component
class MyFlywayConfiguration #Autowired constructor(
val applicationContext: ApplicationContext
) : FlywayConfigurationCustomizer {
override fun customize(configuration: FluentConfiguration?) {
val migrationBeans = applicationContext.getBeansOfType(JavaMigration::class.java)
val migrationBeansAsArray = migrationBeans.values.toTypedArray()
configuration?.javaMigrations(*migrationBeansAsArray)
}
}
Configuration option B, untested, but should also work
import org.flywaydb.core.api.migration.JavaMigration
import org.springframework.boot.autoconfigure.flyway.FlywayAutoConfiguration
import org.springframework.boot.autoconfigure.flyway.FlywayConfigurationCustomizer
import org.springframework.context.ApplicationContext
import org.springframework.context.annotation.Bean
import org.springframework.context.annotation.Configuration
#Configuration
class MyFlywayConfiguration : FlywayAutoConfiguration.FlywayConfiguration() {
#Bean
fun flywayConfigurationCustomizer(applicationContext: ApplicationContext): FlywayConfigurationCustomizer {
return FlywayConfigurationCustomizer { flyway ->
val p = applicationContext.getBeansOfType(JavaMigration::class.java)
val v = p.values.toTypedArray()
flyway.javaMigrations(*v)
}
}
}
And with that you can just write your migrations as almost any other Spring bean:
import org.flywaydb.core.api.migration.BaseJavaMigration
import org.flywaydb.core.api.migration.Context
import org.springframework.beans.factory.annotation.Autowired
import org.springframework.stereotype.Component
#Component
class V7_1__MyMigration #Autowired constructor(
) : BaseJavaMigration() {
override fun migrate(context: Context?) {
TODO("go crazy, mate, now you can import beans, but be aware of circular dependencies")
}
}
Side notes:
Be careful of circular dependencies, your migrations can most likely not depend on repositories (also makes sense, you are preparing them, after all)
Make sure your migrations are located where Spring scans for classes. So if you want to place them in the namespace db/migrations, you need to ensure that Spring scans that location
I haven't tested, but it's likely one should be cautious with mixing the path for these migrations and the locations where Flyway scans for migrations
Current flyway 6.5.5 version is released and back from 6.0.0 I believe support for spring beans is provided.
You can directly autowire spring beans into your Java based migrations (using #autowired), But the hunch is your Migration class also should be managed by Spring to resolve dependency.
There is a cool and simple way for it, by overriding default behavior of Flyway, check out https://reflectoring.io/database-migration-spring-boot-flyway/
the article clearly answers your question with code snippets.
If you are using deltaspike you can use BeanProvider to get a reference to your DAO.
Change your DAO code:
public static UserDao getInstance() {
return BeanProvider.getContextualReference(UserDao.class, false, new DaoLiteral());
}
Then in your migration method:
UserDao userdao = UserDao.getInstance();
And there you've got your reference.
(referenced from: Flyway Migration with java)
I am new to Mockito and need to learn it for work.
I made a very simple class that has one method that returns a string.
I then made the following test class in eclipse.
import static org.junit.Assert.*;
import org.junit.Test;
import org.mockito.Mockito;
public class No_1Test {
#Test
public void testNo_1() {
No_1 myTest = Mockito.mock(No_1.class);
Mockito.when(myTest.HelloWorld()).thenReturn("Hello World");
String result = myTest.HelloWorld();
Mockito.assertEquals("Hello World", myTest.HelloWorld());
}
}
My understanding of what I have made so far is:
I made a mock class of my No_1 class.
I specified that whenever the HelloWorld() method is called it should return the string ("Hello World")
I stored the results of HelloWorld() into the variable result (which should be "Hello World")
I want to assert that it does what it was meant to do.
The problem is that in eclipse it says that the assertEquals method is undefined for Mockito.
Can someone please point out where I am going wrong here.
You are getting the error like assertEquals method is undefined for mockito because we can't use mockito as in mockito.assertEquals as in your codes try changing it with junit.assertEquals()
And What my experience on mockito says that you should avoid mock classes of the same project,we use to mock classes for which we are dependent on other projects or module,so don't mock No_1 class in your codes and try these codes::
import static org.junit.Assert.*;
import org.junit.Test;
import org.mockito.Mockito;
public class No_1Test {
#Test
public void testNo_1() {
Mockito.when(myTest.HelloWorld()).thenReturn("Hello World");
Junit.assertEquals("Hello World", myTest.HelloWorld());
}
}
And mockito is for mocking java classes or method results but try using junit for your testing as in junit.assertequals
I try to get the titles and URLs from a public Picasa album. But I am stuck at the very beginning: I cannot create a new PicasawebService.
My Code:
import java.util.List;
import java.io.File;
import java.net.URL;
import com.google.gdata.client.*;
import com.google.gdata.client.photos.*;
import com.google.gdata.data.*;
import com.google.gdata.data.media.*;
import com.google.gdata.data.photos.*;
import java.util.ArrayList;
public class PicasaManager implements PicasaConnector {
public List<Avatar> getPhotoURLs() throws Exception {
PicasawebService myService = new PicasawebService("HI");
myService.setUserCredentials("foo#gmail.com", "mypassword");
ArrayList<Avatar> rl = new ArrayList<Avatar>();
URL feedUrl = new URL("https://picasaweb.google.com/111420671758947023853/EWA2012");
System.out.println("dddddddddddddddddd");
AlbumFeed feed = myService.getFeed(feedUrl, AlbumFeed.class);
for (PhotoEntry photo : feed.getPhotoEntries()) {
Avatar a1 = new Avatar();
a1.setDescription(photo.getTitle().getPlainText());
a1.setUrl(photo.getMediaThumbnails().get(0).getUrl());
rl.add(a1);
}
return (rl);
}
}
The Error Message:
Exception in thread "main" java.lang.NoSuchMethodError: com.google.common.collect.ImmutableSet.copyOf([Ljava/lang/Object;)Lcom/google/common/collect/ImmutableSet;
at com.google.gdata.wireformats.AltFormat$Builder.setAcceptableTypes(AltFormat.java:399)
at com.google.gdata.wireformats.AltFormat$Builder.setAcceptableXmlTypes(AltFormat.java:387)
at com.google.gdata.wireformats.AltFormat.<clinit>(AltFormat.java:49)
at com.google.gdata.client.Service.<clinit>(Service.java:558)
at tuwien.big.mensch.utilities.PicasaManager.getPhotoURLs(PicasaManager.java:27)
at tuwien.big.mensch.utilities.test.main(test.java:29)
test.java is my test class with the public static void main method,
Avatar is a class with two variables: description and url, there are getters and setters for both
in my netbeans IDE line 27 of the PicasaManager.java file is: PicasawebService myService = new PicasawebService("HI");
the implemented interace only defines the getPhotoURLs() method
I have no idea how to solve this problem, i hope somebody here can help me.
Have you included gdata-core-1.0.jar and guava-12.0.jar? Good luck on the rest of Web Engineering UE4 ;-)