I am writing a c# application that uses OSIsoft AFSDK dll (2016 version). My application should define PI server collective and send data to this collective.
But what I'm trying to figure out is:
using C# code, how to define a PI data archive servers as a collective? and how to configure one of them to be the primary server?
I've been searching for code examples and couldn't find any code.
Can anyone post an example or a reference to such an example?
you can add a new Collective to the Known Servers Table using the next code snippet:
using OSIsoft.AF.PI;
PIServers myPIServers = new PIServers();
PIServer newPIServer = myPIServers.Add("NewPIServer");
Then you can access to PI Collective information using:
PICollective collective = newPIServer.Collective
You can consult the Live Library:
https://techsupport.osisoft.com/Documentation/PI-AF-SDK/Html/T_OSIsoft_AF_PI_PIServers.htm
And also there's a very good forum for anything regarding OSIsoft PI: https://pisquare.osisoft.com/
Hope it helps!
Related
I have installed nominatim 4.1.0 (tokenizer= ICU) via following instructions on nominatim documentation, added wikipedia data during the installation, and imported an updated pbf file from geofabrik.de.
All works but when I sent some kind of request (e.g. Cagliari via Roma) the answer I get from Nominatim Website (https://nominatim.openstreetmap.org/) and my local installation are very different. The right results are on nominatim website of course.
The problems seems to be with the search candidate algorithm or the attribuition/calc of AdressImportance parameter.
The very strange thing is that I get these wrong results only for some requests.
There is any particular parameter to set or anything else to verify?
I hope it is clear for you and even small advice or comment would be very helpful for me
Thanks
Michele
After a discussion with the maintainers (https://github.com/osm-search/Nominatim/discussions/2839), I found an acceptable solution by editing the Geocode.php file line as follows:
$this->iLimit = $iLimit + max($iLimit, 150)
the result is not exactly the same as that of the online version but it works fine for me
I want to replicate the functionality of the IBM i Access Client Solutions "Printer Output" tool that is used to retrieve PDF's of spooled files from our IBM Db2 environment. Instead of a user interface, I want to replicate the functionality as an API.
I want to construct an API which takes inputs such as the filter parameters pictured below:
The output of the API would be PDF(s) of the printer output spooled files that match the parameters specified.
I figure that if I am able to access the i Access Printer Output tool, then I should be able to use my credentials to access the spool files using an API or something like that.
Where would I start in constructing something like this?
Also, are there any IBM guides that contain relevant information? I have looked but been unsuccessful. The Programmer's Toolkit is, also, not available with my version of i Access.
Also, I don't have developer roles, so if this is possible, it would need to be something that I can do with little authority within the IBM i servers and the Access client.
First off, IBM ACS is Java based. Thus everything it does can be found in the IBM Toolbox for Java, aka JTOpen aka JT400.
http://jt400.sourceforge.net/
Documentation https://www.ibm.com/docs/en/i/7.4?topic=java-toolbox
You're going to want to look at the reading a transformed spool file example
The transformation actually happens on the IBM i side, by specifying the appropriate workstation customization object, QCTXPDF in this case rather than the examples original QWPTIFFG4
// The following examples demonstrate how to set up a PrintParameterList to
// obtain different transformations when reading spooled file data. In the code
// segments that follow, assume a spooled file already exists on a server, and
// the createSpooledFile() method creates an instance of the SpooledFile class
// representing the spooled file.
// Create a spooled file
SpooledFile splF = createSpooledFile();
// Set up print parameter list
PrintParameterList printParms = new PrintParameterList();
printParms.setParameter(PrintObject.ATTR_WORKSTATION_CUST_OBJECT, "/QSYS.LIB/QCTXPDF.WSCST");
printParms.setParameter(PrintObject.ATTR_MFGTYPE, "*WSCST");
// Create a transformed input stream from the spooled file
PrintObjectTransformedInputStream is = splF.getTransformedInputStream(printParms);
I'm new to the lsp4e & lsp technologies and as far as I have seen the framework provides almost everything for working with eclipse. However there is a way to use this features at will? i.e I would like to use the LS to get all the functions on a file, I think this will be done with textDocument/documentSymbol but how can I get this using the lsp4e framework?
NOTE:
I checked for SymbolKind and seems it was not the one I was looking for however that input helped me finding a sample of DocumentSymbol
DocumentSymbolParams params = new DocumentSymbolParams(
new TextDocumentIdentifier(documentUri.toString()));
CompletableFuture<List<Either<SymbolInformation, DocumentSymbol>>> symbols =
languageServer.getTextDocumentService().documentSymbol(params);
I checked for SymbolKind and seems it was not the one I was looking for. However that input helped me finding a sample of DocumentSymbol
DocumentSymbolParams params = new DocumentSymbolParams(
new TextDocumentIdentifier(documentUri.toString()));
CompletableFuture<List<Either<SymbolInformation, DocumentSymbol>>> symbols =
languageServer.getTextDocumentService().documentSymbol(params);
I have a 3-axis system, which resembles the CNC-axis, and a PowerPanel from B&R. Now I plan to execute the g-code, which I read from a file, which is fe located in the Downloads folder. This will be done with fbs from B&R Automation Studio.
I got confused with the help, since it says in drive engineering/mapp Motion/technologie/function block/mpcnc3axis/description the part of moveProgram, where it redirects you to MC_BR_MoveProgram \ description. There stands that you can start the program with [Program name prefix] [File device name:] [Path] Program name syntax. Now I am not sure how to include this with my MpCnc3Axis code or if I can use the syntax also in MpCnc3AxisParType ProgramName part to start the program from fe Downloads Folder, since it didn't work with McPrgAdvParType InitProgramName.
Any links to related material would be appreciated.
I would also accept a solution with C, if it is easier.
Depending on if you are willing to buy software licences from B&R, running a CNC system is more or less easy.
The state of the art implementation is with mappMotion. It requires software licenses and gives you ready to go FUBs to execute nc files, jogging, direct movements, etc. This works the same way for different robot types and CNC kinematics. I recently uploaded a small implementation of a robot on GitLab: https://gitlab.com/kirni/bur_robotic_sample
The alternative is the old ARNC0 approach. No more new features are implemented, but it is free - as long as you do not need any functions that require a Dual Use agreement (i.e. 5 Axis CNC, etc.). The implementation is rather complex and is definitely to extensive to be answered completely at stackoverflow.
However Automation Studio ships with a sample for a two axis CNC. In the logical view you can add a new object Library Samples which opens a dialog where you can select Samples/Motion/CNC system (2 axis)/LibARNC0_Basic_ST.zip. This would be the best starting point, which is also documented in the help in MotionControl/ACP10 ARNC0/Examples/CNC or guid: 4620bb1c-8694-4f27-87d0-805686d7c0c8 as of AS 4.4.4.64.
I hope this helps!
I want to get the adaptor which I use on a USB-to-serial. Do you know any way to get the adaptor used? I already searched on the internet however I didn't find anything useful. Currently I am using matlab to get the data from the device. I use funcion instrhwinfo.
The output of the funcion is my case is:
serialInfo =
AvailableSerialPorts: {'COM14'}
JarFileVersion: 'Version 2.8.0'
ObjectConstructorName: {'serial('COM14');'}
SerialPorts: {'COM14'}
But, this details are not enough I want to know the ADAPTOR used on the COM14 (the model of the cable which I use).
But I want to know more details about the COM14. In this case, there's only one COM PORT avaibable, but the problem is if there are more than one, I need to know the model of the cable to connect to the correct COM PORT.
You would have to look in the registry for additional info. However the entries may depend on your particular device. Most USB/serial cables use FTDI chips and create registry entries under: SYSTEM\CurrentControlSet\Enum\FTDIBUS
A less complicated solution that I've used is to loop through all the active COM ports until you find the one that gives the appropriate response.