I am trying to install moodle. It has been a very frustrating experience with the "Server Checks" page during the installation process with 2 issues.
php_extension for php_intl.dll is failing. I have done nearly everything that is written anywhere but the server check still fails.
php_setting for opcache.enable also fails. All the settings in php.ini as per recommendation has been made and yet this check doesn't pass.
One pointer which may be useful. from the command prompt, when i tried to do php -v to check version or if i run php.exe, it throws an error saying:
"PHP Warning: PHP Startup: Unable to load dynamic library 'D:\Moodle_34\server\php\ext\php_intl.dll' - The specified module could not be found. in Unknown on line 0"
moodle 3.4.3+
Windows 8.1 pro desktop
PHP 7.1.10
Apache 2.4
XAMPP 3.2.2
Any help would be most welcome.
Related
I'm attempting to install PostgreSQL (10.1) and pgAdmin 4 for an online course I'm taking. Every time I try to run the .exe file for the download I get the following error message:
There has been an error. Unknown error while running C:
\Temp\postgresql_installer_a8b04b6e60\getlocales.exe
I've tried to Run as Admin, I've tried downloaded previous versions of PostgreSQL and nothing seems to work. I've found others who have had the same issue but haven't found a resolution.
Does anyone know how I can install? Thanks.
Before installation, I closed all antivirus and antispy-patch for cryptolocker. Some rules added by protection softwares, blocked install file from running another place and change-read settings. First I installed pgadmin 4 v1.6, then upgrade it to v2.0.
I also using PHPStorm built-in database browser. Faster than pgadmin4.
Last week I installed PHP 7.0.0RC2 on my Raspberry Pi B.
I am able to view PHP pages, however, the problem is that I cannot connect to the database using mysqli (I know that mysql is no longer supported in PHP v7).
I ran the ./configure command with --with-mysqli=shared.
However, when I check which modules are installed using the php -m command, I do not see mysqli.
I tried adding extension=mysqli.so to the php.ini file.
It first complained that the mysqli.so file could not be found, so I tried copying the mysqli.so of my php5 version to the extensions folder.
However, this did not solve the problem and resulted in the following error message:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20141001/mysqli.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20141001/mysqli.so: undefined symbol: zval_used_for_init in Unknown on line 0
Does anyone got any suggestions of how to get mysqli to work with my PHP7 installation on my Raspberry Pi?
You may find detailed information in the configure output, but it's pretty hard to catch, and if it's not a fatal error, won't stop the build going ahead when you make.
The recommended (read: only decent) driver for MySQLi is the MySQL Native Driver (mysqlnd).
If you want MySQLi to be built shared, you must also build mysqlnd shared, and everything that depends on it (PDO MySQL, for example).
It's going to be simpler to just build the native drivers static, using the configure option:
--with-mysqli=mysqlnd
Which will enable a static build of mysqlnd and mysqli.
If for some reason you really do want to build shared, then you'll need configure options that closely resemble, if not are exactly the same as:
--enable-mysqlnd=shared
--with-mysqli=shared,mysqlnd
Which will result in a shared build of mysqlnd and mysqli, requiring you to add extension=mysqlnd.so and extension=mysqli.so in the appropriate order (the latter depends on the former), in the appropriate place.
Remember to make distclean before you re-configure the build, surprising things will happen if you do not ;)
PHP Startup: unable to load dynamic library
'C:\xampp\php\ext\php_memcached.dll' -%1 is not a valid Win32
application.
This error is keep showing whenever I restart Apache Server(Using xampp).
I have installed memcached and started using command prompt, memcached.exe -d start and its running fine as I checked task manager.
Now, How to fix it? Am I not using right .dll file?
Try phpinfo() and check right on top, where it says Compiler, if you downloaded the correct VC8/9/10 32/64bit version of the .dll, exchange it - if needed - restart apache and you should be fine. Sometimes this can be a bit tedious to find the corresponding .dll's, good luck!
yes. regardless windows 64, 86 version nor non-thread safe version or other. Try all version to figure out if what version is suite for your xampp.
I am getting a bunch of compile errors when I try to install the MySQL DBD::mysql Perl library. I am trying to install this library on OpenSuse linux (SUSE Linux Enterprise server 10 (x86_64) version 10, patch level 4)
The install fails when trying to compile dbdimp.h. There are hundreds of complile errors but I have reason to believe they all stem from the first 3:
dbdimp.h:23:49: error: mysql.h: No such file or directory
dbdimp.h:24:45: error: mysqld_error.h: No such file or directory
dbdimp.h:26:49: error: errmsg.h: No such file or directory
I believe that the reason I am getting the errors above is that I have no MySql Client installed. I do not know how to install mysql client (I believe I am supposed to get some version of libmysqlclient).
I am brand new to opensuse and vaguely familar with installing packages on Linux in general have used yum, yast, apt-get on ubuntu + centOS previously but the only package manager tools that seem to be on OpenSuse 10 are rpm and zypper. I have not managed to install the required mysql client using either of these. If anyone knows how to install MySql Client to resolve my issue I would greatly appreciate any recomendations
Thanks
You need to install MySQL or the MySQL client libraries, either through your system's package manager or by following the installation instructions from the source code.
It sounds like your question is really "How do I install MySQL on OpenSuse", which would be more appropriate for one of the other StackExchange sites.
I was able to resolve this to a point. In my original question, I stated that I had tried using YAST but that it had not worked. In fact, I did not fully explore the YAST install option but when I did, I managed to download install the required librarys by following an article I found (http://adminramble.com/install-mysql-yast/#chitika_close_button)
I was able to open the YAST GUI in the terminal window (not an X-window display) and navigate through the "software management" section wherein I was able to do a search for MySql. Amoung the search results were mysql client libraries, which I then selected and hit "Accept". The installation started and completed successully.
In order to complile the PERL DBD::mysql module, I had to create a new makefile with the ccflags specified so that the header files could be found:
perl Makefile.PL --cflags -I/usr/include/mysql
I say "to a point" at the top of this comment because I then ran into further problems compiling but my original issue posted has been partially resolved and getting this far may help someone else who is experiencing the same problem. Will update if I get a solution to the compile problem.
I'm attempting to install memcache for MAMP. It seems to configure/make/install fine but I'm getting an error saying the API version is wrong:
[26-Oct-2012 17:40:51 UTC] PHP Warning: PHP Startup: memcache: Unable to initialize module
Module compiled with module API=20090626
PHP compiled with module API=20100525
These options need to match
in Unknown on line 0
I am using MAMP 2.1.1 on OS X Mountain Lion.
I'm using this memcache build:
http://pecl.php.net/package/memcache/2.2.7
I extracted the archive into this directory:
/Applications/MAMP/bin/php/php5.4.4/include/memcache-2.2.7
And then ran these commands from the extracted directory:
/Applications/MAMP/bin/php/php5.4.4/bin/phpize
./configure
make
sudo make install
No errors except what I noted above, which I am seeing in:
/Applications/MAMP/logs/php_error.log
Any ideas on how to fix this?
Ok so after a few hours of trying to figure this out, I was able to find the problem and fix it. I'm pretty much a huge noob when it comes to all of this stuff, but here is the best I can explain what I think I figured out:
So, when I ran first ran phpize on the module, it was configured for my system's default installation of php. I had to point php and phpize to my PATH in my .bash_profile
export PATH=/Applications/MAMP/Library/bin:/Applications/MAMP/bin/php/php5.4.3/bin:/usr/local/bin:$PATH:/opt/local/bin
Make sure to change the php version to what ever version you are running.
After adding this to your path, running phpize -v should return:
PHP Api Version: 20100412
Zend Module Api No: 20100525
Zend Extension Api No: 220100525
and running which phpize should return: /Applications/MAMP/bin/php/php5.4.3/bin/phpize
So then it was just a matter of deleting all of the files that were installed the first time, and running through the installation process again. I unzipped the downloaded file cd into the unzipped folder and ran:
/Applications/MAMP/bin/php/php5.4.3/bin/phpize
./configure
make
cp modules/memcache.so /Applications/MAMP/bin/php/php5.4.3/lib/php/extensions/no-debug-non-zts-20100525/
And boom done. It works!
This article helped me out a lot, even though it isn't related to memcache: http://drupal.org/node/1464236