What changes should make to enable dlt-system.
In build folder dlt-system application is not generating.
Manually by using command: cmake -D with dlt-system=ON it will generate but I need to generate while building please look at recipie image
Your recipe supports dlt-system via PACKAGECONFIG.
In order to activate that flags in the compilation process, you just need to add dlt-system to PACKAGECONFIG in .bb or .bbappend file to the recipe:
PACKAGECONFIG_append = " dlt-system"
If you want to add it from local.conf:
PACKAGECONFIG_pn-name_append = " dlt-system"
Just change name with your recipe name.
This will add -DWITH_DLT_SYSTEM=ON to EXTRA_OECMAKE which is used in do_configure of the cmake class.
I new to Yocto so there are probably some mistakes and misunderstanding that I've had, I appreciate if you can help.
So, I want to add a new package (tar file) to my custom image.
I have followed steps and steps in manual and some online instructions. While running: "bitbake mylayer", the layer is built fine but I got this error while building the image, here is the log file:
DEBUG: Executing python function rootfs_deb_bad_recommendations
DEBUG: Python function rootfs_deb_bad_recommendations finished
DEBUG: Executing python function extend_recipe_sysroot
NOTE: Installed into sysroot: []
NOTE: Skipping as already exists in sysroot: ['depmodwrapper-cross', 'apt-native', 'dpkg-native', 'pseudo-native', 'update-rc.d-native', 'prelink-native', 'makedevs-native', 'ldconfig-native', 'opkg-util$
DEBUG: Python function extend_recipe_sysroot finished
DEBUG: Executing python function do_rootfs
NOTE: ###### Generate rootfs #######
NOTE: Installing the following packages: apt busybox copy-uefiimg-to-sda coreutils dpkg e2fsprogs-resize2fs libfontconfig1 libfreetype6 libglib-2.0-0 gptfdisk libjemalloc2 kernel-module-axi-dma-sensor ku$
ERROR: Unable to install packages.
Reading package lists...
Building dependency tree...
Reading state information...
Package mypackage is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mylayer' has no installation candidate
DEBUG: Python function do_rootfs finished
ERROR: Function failed: do_rootfs
And here is mylayer.bb:
SUMMARY = ""
LICENSE = "CLOSE"
FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
SRC_URI += "file://mypackage.tar"
Also, I have included the package in conf/local.conf:
IMAGE_INSTALL_append += " mylayer"
So beside trying to figure out how to solve this problem, I also have some questions:
I have read some example of .bb, and they mentioned about LIC_FILES_CHKSUM. The mypackage.tar.gz is a package to install a platform for the device and I don't know much about the source code, so I don't know if it is necessary to include the license? Or how to know that this package need license to install?
In some answer I found online, there is one saying that I need to include PACKAGE_CLASSES ?= "package_deb" (they want to install the .deb file), so probably in my case I will need PACKAGE_CLASSES ?= "package.tar" right? I have tried to change variable, but it still not successful.
The mypackage.tar includes some deb files. If I could not install mypackage.tar, can I instead install these .deb files? Can I put it all in mylayer.bb?
Thank you in advanced, I have tried to study much documents as I could but I get so confused and there is huge amount of information to digest.
First, before answering your questions
Let me mention some best practices advice for you:
Rename the recipe to some significant name related to you compressed package.
Naming the recipe to mylayer confuses Yocto users, because there is the term layer also.
Regarding you recipe:
There is no need for FILESEXTRAPATHS because the recipe path is added automatically to Yocto paths.
FILESEXTRAPATHS it is required for .bbappend files.
You need to override the do_install task function, it does nothing by default.
do_install is the first essential task to make sure that your sources are included in the final image.
Beside that, when specifying a compressed source file into SRC_URI, yocto automatically decompresses it.
This is mentioned here.
So, here what your recipe should look like:
SUMMARY = ""
LICENSE = "CLOSED"
# Prevent Yocto from decompressing the file
SRC_URI = "file://mypackage.tar;unpack=0"
do_install(){
# Create the opt folder into the final image, ${D} is ${WORKDIR}/image
install -d ${D}/opt
# Copy the compressed file there; You can change permissions as you want
install -m 0755 ${WORKDIR}/mypackage.tar ${D}/opt
}
# Very important to specify what you installed in (do_install)
FILES_${PN} = "/opt/*"
Now, when you run IMAGE_INSTALL_append += " mylayer" your file will be installed.
Regarding your questions:
You mentioned that your compressed file contains .deb files, I assume that no license checksum is needed. Also, I understand that you may wanted to point to SRC_URI[md5sum] or other checksums for the full package. That is also not needed for local files, it is used to check for the integrity of online sources.
PACKAGE_CLASSES as mentioned here, is used by the system to know in what type the data should be packaged. By the data I mean the data that you installed with do_install. That data get packaged for according to your PACKAGE_CLASSES variable, for example, to deb file. And that is used, along side with all other recipes packages, to build the final rootfs.
Yes, if you are installing the tar file into the image and then unpack it to install all deb files, for example, with dpkg. You can use the bin_package class to do that, now the recipe must be changed for that reason:
Decompress the tar file and provide the deb files in the local files folder.
Add all deb files to SRC_URI
Inherit the bin_package class
Specify the files to be packaged.
Your recipe should look like this:
SUMMARY = ""
LICENSE = "CLOSED"
SRC_URI = "file://deb_file1.deb \
file://deb_file2.deb"
# No need to `do_install` , it is invoked by the (bin_package) class
FILES_${PN} = ""
Important:
About FILES_${PN}, you need to add all what the deb installed into the image folder
Example, if your deb file installs this:
/usr/bin/hello
/etc/hello.cfg
Specify them:
FILES_${PN} = "/usr/bin/*"
FILES_${PN} += "/etc/*"
Use * so if other deb files install files into the same folder as others it will include all.
I am trying to build a custom recipe with Yocto (Rocko) for my Linux i.MX6 based embedded system.
The main recipe had dependency on a other custom recipe(as the main recipe is using header-files from this recipe) which is also creating some binaries which needs to be included in the final image.
I have added other_recipe(nbdkit) in the "DEPENDS" of main_recipe.bb
DEPENDS += "nbdkit"
the main recipe is creating a .so with the help of its own source file which is including header-files from the 'kit' recipe. I am able to install the binaries & .so generated using this main_recipe by adding it in do_install().
Now in the other_recipe(nbdkit http://cgit.openembedded.org/meta-openembedded/tree/meta-networking/recipes-support/nbdkit/nbdkit_git.bb?h=master), When I add do_install()to include the binaries generated from that recipe the main_recipe build gets failed with PKG_CONFIG error as follow,
| Package nbdkit was not found in the pkg-config search path.
| Perhaps you should add the directory containing `nbdkit.pc'
| to the PKG_CONFIG_PATH environment variable
| No package 'nbdkit' found
Other build errors says that the header-files of kit included in the main_recipe is not found.
app-nbdkit-plugin.c:2:10: fatal error: nbdkit-plugin.h: No such file or directory
Where app-nbdkit-plugin.c is source file of main_recipe & kit-plugin.h is header file of other_recipe.
The strange thing is, when I remove do_install() from other_recipe(nbdkit) the main_recipe is getting built successfully.
Now I doubt, Is it possible to set a recipe as DEPENDS of other recipe and at the same time it provides output file as do_install()?
Will sharing header-files from other_recipe to main_recipe resolves the issue? If yes, how to do that?
Thanks.
[EDIT] Added nbdkit recipe link.
I'm using Yocto to compile my application for my target hardware. The build succeeds, but I get a warning:
WARNING: myApplication-0.0.1-r0 do_package_qa: QA Issue: /usr/local/bin/myApplication contained in package myApplication requires libstdc++.so.6(CXXABI_1.3.3), but no providers found in RDEPENDS_myApplication? [file-rdeps]
I've added everything I can find to both the DEPENDS and RDEPENDS of my application's recipe, but I'm still getting that error.
DEPENDS += "gcc-runtime"
RDEPENDS_${PN} += "libstdc++ libstdc++-dev gcc-runtime"
Is there something I can add to my RDEPENDS to eliminate this warning?
I have also tried these other combinations, all of which resulted in a successful build, and of which give the same warning.
Both DEPENDS and RDEPENDS empty.
RDEPENDS_${PN} += "libstdc++"
RDEPENDS_${PN} += "libstdc++ libstdc++-dev
RDEPENDS_${PN} += "libstdc++ gcc-runtime DEPENDS += "gcc-runtime"
Please try to add
RDEPENDS_${PN} += "libstdc++6"
RDEPENDS needs the output package name which usually is the name of ipk or rpm and
not the recipe name which generated the given output package. Secondly packages containing only libraries also use debian library naming conventions so they get renamed like above.
I am trying to install a set of CMake utilty functions under /usr/share/cmake-3.4/Modules/MYMODULES/useful.cmake within a Yocto build.
Here is my current (sanitized) recipe (call it my-useful-modules.bb)
SECTION = "devel"
LICENSE = "CLOSED"
inherit cmake
EXTERNALSRC := "path/to/source/code"
do_compile() {
:
}
FILES_${PN} += "${datadir}/cmake-3.4/Modules/MYMODULES/*"
BBCLASSEXTEND = "nativesdk"
The configure and install tasks work fine, and if I look under image in tmp/work/..., I see the full tree (including all my host directories as expected).
But I keep getting the following error
ERROR: nativesdk-my-useful-modules-1.0-r0 do_package: QA Issue:
nativesdk-my-useful-modules: Files/directories were installed but not
shipped in any package:
Followed by a long list of files which basically includes everything under image.
These modules need to be available both in the native sysroot during the build, and in the standard SDK built with populate_sdk.
Which package should I be specifying with FILES_${PN} to get them packaged?
I'd also appreciate knowing how to either avoid specifying the cmake version in the FILES statement, or get it from the build system.
Updating FILES_${PN} will resolve your error and also there is no need to provide cmake version in this case.
FILES_${PN} += "${datadir}/*"