Below is code in which I need help.
#!/usr/bin/perl -w
use strict;
use Data::Dumper;
my #arrayElements = ('Array Functions');
print join(", ", #arrayElements);
### Output => Array Functions
my %hashElements = ();
I want to assign the content of #arrayElements to $hashElements{Item}
Missing some core concepts or trying wrong and been a while struggling with this.
You seem to be missing some core concepts of Perl (or programming in general). If you are learning Perl through a book or online tutorial, I suggest you re-read the chapters on arrays and hashes.
Let's look at the things involved here. You have:
#arrayElements, which is an array. It contains a list with one elements, the string 'Array Functions'.
%hashElements, which is a hash. It's empty.
$hashElements{Item}, which is a scalar value. You want to set this.
You say you want $hashElements{Item} to have the value 'Array Functions', which you have as the first element in your array #arrayElements.
$hashElements{Item} = $arrayElements[0];
And that's it. Both $hashElements{Item} and $arrayElements[0] are scalar values. That's why their sigils (the sign at the front) changes from an # (for array) or % (for hash) to a $. You can distinguish whether the value came from a hash or an array by the brackets used to access the elements. [] is for arrays, and {} is for hashes.
You cannot do the following though.
$hashElements{Item} = #arrayElements;
Because $hashElements{Item} is a scalar, the thing on the right hand side of the assignment will be treated in scalar context. An array in scalar context gets converted to the number of elements in the array, so this would assign 1. That's not what you want.
You should really read up more about this, and also pick better names for your variables. Your example is very confusing. In general, we don't do $CamelCase for variable names in Perl, but instead use $snake_case, which is easier to read and type.
Take a look at the following resources to learn more about the concepts I've mentioned above.
Perl Maven, perldata, perldsc
Related
In Programming Perl (the book) I read that I can create a dictionary where the entries hold an array as follows:
$wife{"Jacob"} = ["Leah", "Rachel", "Bilhah", "Zilpah"];
Say that I want to grab the contents of $wife{"Jacob"} in a list. How can I do that?
If I try:
$key = "Jacob";
say $wife{$key};
I get:
ARRAY (0x56d5df8)
which makes me believe that I am getting a reference, and not the actual list.
See
perllol,
perldsc and
perlreftut
for information on using complex data structures and references.
Essentially, a hash can only have scalars as values, but references are scalars, Therefore, you are saving an arrayref inside the hash, and have to dereference it to an array.
To dereference a reference, use the #{...} syntax.
say #{$wife{Jacob}};
or
say "#{$wife{Jacob}}"; # print elements with spaces in between
I guess by this time you must be knowing that
$ refers to a scalar
and # refers to an array.
since you yourself said that the value for that key is an array,then you should
say #wife{$key};
instead of
say $wife{$key};
I'm no expert at Perl, wondering why the first way of obtaining numSheets is okay, while the following way isn't:
use Spreadsheet::Read;
my $spreadsheet = ReadData("blah.xls");
my $n1 = $spreadsheet->[1]{sheets}; # okay
my %sh = %spreadsheet->[1]; # bad
my $n2 = $sh{label};
The next to last line gives the error
Global symbol "%spreadsheet" requires explicit package name at newexcel_display.pl line xxx
I'm pretty sure I have the right sigils; if I experiment I can only get different errors. I know spreadsheet is a reference to an array not directly an array. I don't know about the hash for the metadata or individual sheets, but experimenting with different assumptions leads nowhere (at least with my modest perl skill.)
My reference on Spreadsheet::Read workings is http://search.cpan.org/perldoc?Spreadsheet::Read If there are good examples somewhere online that show how to properly use Spreadsheet, I'd like to know where they are.
It's not okay because it's not valid Perl syntax. The why is because that's not how Larry defined his language.
The sigils in front of variables tell you what you are trying to do, not what sort of variable it is. A $ means single item, as in $scalar but also single element accesses to aggregates such as $array[0] and $hash{$key}. Don't use the sigils to coerce types. Perl 5 doesn't do that.
In your case, $spreadsheet is an array reference. The %spreadsheet variable, which is a named hash, is a completely separate variable unrelated to all other variables with the same identifier. $foo, #foo, and %foo come from different namespaces. Since you haven't declared a %spreadsheet, strict throws the error that you see.
It looks like you want to get a hash reference from $spreadsheet->[1]. All references are scalars, so you want to assign to a scalar:
my $hash_ref = $spreadsheet->[1];
Once you have the hash reference in the scalar, you dereference it to get its values:
my $n2 = $hash_ref->{sheets};
This is the stuff we cover in the first part of Intermediate Perl.
What is the difference between $this, #that, and %those in Perl?
A useful mnemonic for Perl sigils are:
$calar
#rray
%ash
Matt Trout wrote a great comment on blog.fogus.me about Perl sigils which I think is useful so have pasted below:
Actually, perl sigils don’t denote variable type – they denote conjugation – $ is ‘the’, # is
‘these’, % is ‘map of’ or so – variable type is denoted via [] or {}. You can see this with:
my $foo = 'foo';
my #foo = ('zero', 'one', 'two');
my $second_foo = $foo[1];
my #first_and_third_foos = #foo[0,2];
my %foo = (key1 => 'value1', key2 => 'value2', key3 => 'value3');
my $key2_foo = $foo{key2};
my ($key1_foo, $key3_foo) = #foo{'key1','key3'};
so looking at the sigil when skimming perl code tells you what you’re going to -get- rather
than what you’re operating on, pretty much.
This is, admittedly, really confusing until you get used to it, but once you -are- used to it
it can be an extremely useful tool for absorbing information while skimming code.
You’re still perfectly entitled to hate it, of course, but it’s an interesting concept and I
figure you might prefer to hate what’s -actually- going on rather than what you thought was
going on :)
$this is a scalar value, it holds 1 item like apple
#that is an array of values, it holds several like ("apple", "orange", "pear")
%those is a hash of values, it holds key value pairs like ("apple" => "red", "orange" => "orange", "pear" => "yellow")
See perlintro for more on Perl variable types.
Perl's inventor was a linguist, and he sought to make Perl like a "natural language".
From this post:
Disambiguation by number, case and word order
Part of the reason a language can get away with certain local ambiguities is that other ambiguities are suppressed by various mechanisms. English uses number and word order, with vestiges of a case system in the pronouns: "The man looked at the men, and they looked back at him." It's perfectly clear in that sentence who is doing what to whom. Similarly, Perl has number markers on its nouns; that is, $dog is one pooch, and #dog is (potentially) many. So $ and # are a little like "this" and "these" in English. [emphasis added]
People often try to tie sigils to variable types, but they are only loosely related. It's a topic we hit very hard in Learning Perl and Effective Perl Programming because it's much easier to understand Perl when you understand sigils.
Many people forget that variables and data are actually separate things. Variables can store data, but you don't need variables to use data.
The $ denotes a single scalar value (not necessarily a scalar variable):
$scalar_var
$array[1]
$hash{key}
The # denotes multiple values. That could be the array as a whole, a slice, or a dereference:
#array;
#array[1,2]
#hash{qw(key1 key2)}
#{ func_returning_array_ref };
The % denotes pairs (keys and values), which might be a hash variable or a dereference:
%hash
%$hash_ref
Under Perl v5.20, the % can now denote a key/value slice or either a hash or array:
%array[ #indices ]; # returns pairs of indices and elements
%hash{ #keys }; # returns pairs of key-values for those keys
You might want to look at the perlintro and perlsyn documents in order to really get started with understanding Perl (i.e., Read The Flipping Manual). :-)
That said:
$this is a scalar, which can store a number (int or float), a string, or a reference (see below);
#that is an array, which can store an ordered list of scalars (see above). You can add a scalar to an array with the push or unshift functions (see perlfunc), and you can use a parentheses-bounded comma-separated list of scalar literals or variables to create an array literal (i.e., my #array = ($a, $b, 6, "seven");)
%those is a hash, which is an associative array. Hashes have key-value pairs of entries, such that you can access the value of a hash by supplying its key. Hash literals can also be specified much like lists, except that every odd entry is a key and every even one is a value. You can also use a => character instead of a comma to separate a key and a value. (i.e., my %ordinals = ("one" => "first", "two" => "second");)
Normally, when you pass arrays or hashes to subroutine calls, the individual lists are flattened into one long list. This is sometimes desirable, sometimes not. In the latter case, you can use references to pass a reference to an entire list as a single scalar argument. The syntax and semantics of references are tricky, though, and fall beyond the scope of this answer. If you want to check it out, though, see perlref.
Here I am thinking I know how to use lists in Perl, when this happens. If I do this (debugging code, prettiness not included):
#! /usr/bin/perl -w
use strict;
my $temp1 = "FOOBAR";
my $temp2 = "BARFOO!";
my #list = { $temp1, $temp2 };
print $temp1; #this works fine
print $list[0]; #this prints out HASH(0x100a2d018)
It looks like I am printing out the address of the second string. How do I get at the actual string stored inside the list? I assume it has something to do with references, but dunno for sure.
my #list = { $temp1, $temp2 };
should be
my #list = ( $temp1, $temp2 ); # Parentheses instead of curly braces.
What your original code did was store a reference to a hash {$temp1 => $temp2} into #list's first element ($list[0]). This is a perfectly valid thing to do (which is why you didn't get a syntax error), it's just not what you intended to do.
You already got the answer to your question, don't use {}, because that creates an anonymous hash reference.
However, there is still the matter of the question you didn't know you asked.
What is the difference between an array and a list in Perl?
In your question, you use the term 'list' as if it were interchangeable with the term array, but the terms are not interchangeable. It is important to understand the what the difference is.
An array is a type of variable. You can assign values to it. You can take references to it.
A list is an ordered group of zero or more scalars that is created when an expression is evaluated in a list context.
Say what?
Ok, conisder the case of my $foo = (1,2,3). Here $foo is a scalar, and so the expression (1,2,3) is evaluated in a scalar context.
On the surface it is easy to look at (1,2,3) and say that's a literal list. But it is not.
It is a group of literal values strung together using the comma operator. In a scalar context, the comma operator returns the right hand value, so we really have ((1 ,2),3) which becomes ((2),3) and finally 3.
Now my #foo = (1,2,3) is very different. Assignment into an array occurs in a list context, so we evaluate (1,2,3) in list context. Here the comma operator inserts both sides into the list. So we have ((1,2),3) which evaluates to (list_of(1,2),3) and then list_of(list_of(1,2),3), since Perl flattens lists, this becomes list_of(1,2,3). The resulting list is assigned into #foo. Note that there is no list_of operator in Perl, I am trying to differentiate between what is commonly thought of as a literal list and an actual list. Since there is no way to directly express an actual list in Perl, I had to make one up.
So, what does all this mean to someone who is just learning Perl? I'll boil it down to a couple of key points:
Learn about and pay attention to context.
Remember that your array variables are arrays and not lists.
Don't worry too much if this stuff seems confusing.
DWIM does, mostly--most of the time the right things will happen without worrying about the details.
While you are pondering issues of context, you might want to look at these links:
Start with the discussion of context in Programming Perl. Larry et alia explain it all much more clearly than I do.
Perlop means something entirely different when you pay attention to what each operator returns based on context.
A nice discussion of scalar and context on Perlmonks.
An short introductory article about context: Context is Everything.
MJD explains context.
The perldoc for scalar and wantarray
Since arrays and hashes can only contain scalars in Perl, why do you have to use the $ to tell the interpreter that the value is a scalar when accessing array or hash elements? In other words, assuming you have an array #myarray and a hash %myhash, why do you need to do:
$x = $myarray[1];
$y = $myhash{'foo'};
instead of just doing :
$x = myarray[1];
$y = myhash{'foo'};
Why are the above ambiguous?
Wouldn't it be illegal Perl code if it was anything but a $ in that place? For example, aren't all of the following illegal in Perl?
#var[0];
#var{'key'};
%var[0];
%var{'key'};
I've just used
my $x = myarray[1];
in a program and, to my surprise, here's what happened when I ran it:
$ perl foo.pl
Flying Butt Monkeys!
That's because the whole program looks like this:
$ cat foo.pl
#!/usr/bin/env perl
use strict;
use warnings;
sub myarray {
print "Flying Butt Monkeys!\n";
}
my $x = myarray[1];
So myarray calls a subroutine passing it a reference to an anonymous array containing a single element, 1.
That's another reason you need the sigil on an array access.
Slices aren't illegal:
#slice = #myarray[1, 2, 5];
#slice = #myhash{qw/foo bar baz/};
And I suspect that's part of the reason why you need to specify if you want to get a single value out of the hash/array or not.
The sigil give you the return type of the container. So if something starts with #, you know that it returns a list. If it starts with $, it returns a scalar.
Now if there is only an identifier after the sigil (like $foo or #foo, then it's a simple variable access. If it's followed by a [, it is an access on an array, if it's followed by a {, it's an access on a hash.
# variables
$foo
#foo
# accesses
$stuff{blubb} # accesses %stuff, returns a scalar
#stuff{#list} # accesses %stuff, returns an array
$stuff[blubb] # accesses #stuff, returns a scalar
# (and calls the blubb() function)
#stuff[blubb] # accesses #stuff, returns an array
Some human languages have very similar concepts.
However many programmers found that confusing, so Perl 6 uses an invariant sigil.
In general the Perl 5 compiler wants to know at compile time if something is in list or in scalar context, so without the leading sigil some terms would become ambiguous.
This is valid Perl: #var[0]. It is an array slice of length one. #var[0,1] would be an array slice of length two.
#var['key'] is not valid Perl because arrays can only be indexed by numbers, and
the other two (%var[0] and %var['key']) are not valid Perl because hash slices use the {} to index the hash.
#var{'key'} and #var{0} are both valid hash slices, though. Obviously it isn't normal to take slices of length one, but it is certainly valid.
See the slice section of perldata perldocfor more information about slicing in Perl.
People have already pointed out that you can have slices and contexts, but sigils are there to separate the things that are variables from everything else. You don't have to know all of the keywords or subroutine names to choose a sensible variable name. It's one of the big things I miss about Perl in other languages.
I can think of one way that
$x = myarray[1];
is ambiguous - what if you wanted a array called m?
$x = m[1];
How can you tell that apart from a regex match?
In other words, the syntax is there to help the Perl interpreter, well, interpret!
In Perl 5 (to be changed in Perl 6) a sigil indicates the context of your expression.
You want a particular scalar out of a hash so it's $hash{key}.
You want the value of a particular slot out of an array, so it's $array[0].
However, as pointed out by zigdon, slices are legal. They interpret the those expressions in a list context.
You want a lists of 1 value in a hash #hash{key} works
But also larger lists work as well, like #hash{qw<key1 key2 ... key_n>}.
You want a couple of slots out of an array #array[0,3,5..7,$n..$n+5] works
#array[0] is a list of size 1.
There is no "hash context", so neither %hash{#keys} nor %hash{key} has meaning.
So you have "#" + "array[0]" <=> < sigil = context > + < indexing expression > as the complete expression.
The sigil provides the context for the access:
$ means scalar context (a scalar
variable or a single element of a hash or an array)
# means list context (a whole array or a slice of
a hash or an array)
% is an entire hash
In Perl 5 you need the sigils ($ and #) because the default interpretation of bareword identifier is that of a subroutine call (thus eliminating the need to use & in most cases ).