the issue:
i need to do something like this
drop table if exists tt_t;
create temp table tt_t(id serial primary key, main_id int, external_id int);
insert into tt_t(main_id, external_id)
select currval(pg_get_serial_sequence('tt_t', 'id')), 1
where not exists (select from tt_t where external_id = 1);
but execution raises an error
SQL Error [55000]: ERROR: currval of sequence "tt_t_id_seq" is not yet defined in this session
solution:
there is a way to solve this with anonymous code block
do
$$
begin
if not exists(select from tt_t where external_id = 1)
then
insert into tt_t(external_id, main_id)
values(1, currval(pg_get_serial_sequence('tt_t', 'id')));
end if;
end;
$$
;
but anonymous blocks has some restrictions e.g. Dapper parameters not working with PostgreSQL through npgsql connection, is postgres anonymous function parameterization supported?
how do i fix it without anonymous code block (UPD: and without any DDL changes)?
probable solution:
insert into tt_t(id, main_id, external_id)
select nextval(pg_get_serial_sequence('tt_t', 'id')), currval(pg_get_serial_sequence('tt_t', 'id')), 1
where not exists (select from tt_t where external_id = 1);
shorter code has been proposed to me
insert into tt_t(id, main_id, external_id)
select nextval(pg_get_serial_sequence('tt_t', 'id')), lastval(), 1
where not exists (select from tt_t where external_id = 1);
but i'm not sure if nextval will be calculated first
What about using a default value:
drop table if exists tt_t;
create temp table tt_t(id serial primary key, main_id int default lastval(), external_id int);
insert into tt_t(external_id)
select 1
where not exists (select * from tt_t where external_id = 1);
In theory it shouldn't be possible that another nextval() is called between the one for the id and the lastval(). However I am not 100% sure if there are some corner cases that I don't know of.
The following works as well (even if one or more of the external_id values already exist).
insert into tt_t(external_id)
select *
from (values (1),(2),(3)) x (external_id)
where not exists (select *
from tt_t
where external_id = x.external_id);
Related
I have a select query that returns a dataset with "n" records in one column. I would like to use this column as the parameter in a stored procedure. Below a reduced example of my case.
The query:
SELECT code FROM rawproducts
The dataset:
CODE
1
2
3
The stored procedure:
ALTER PROCEDURE [dbo].[MyInsertSP]
(#code INT)
AS
BEGIN
INSERT INTO PRODUCTS description, price, stock
SELECT description, price, stock
FROM INVENTORY I
WHERE I.icode = #code
END
I already have the actual query and stored procedure done; I just am not sure how to put them both together.
I would appreciate any assistance here! Thank you!
PS: of course the stored procedure is not as simple as above. I just choose to use a very silly example to keep things small here. :)
Here's two methods for you, one using a loop without a cursor:
DECLARE #code_list TABLE (code INT);
INSERT INTO #code_list SELECT code, ROW_NUMBER() OVER (ORDER BY code) AS row_id FROM rawproducts;
DECLARE #count INT;
SELECT #count = COUNT(*) FROM #code_list;
WHILE #count > 0
BEGIN
DECLARE #code INT;
SELECT #code = code FROM #code_list WHERE row_id = #count;
EXEC MyInsertSP #code;
DELETE FROM #code_list WHERE row_id = #count;
SELECT #count = COUNT(*) FROM #code_list;
END;
This works by putting the codes into a table variable, and assigning a number from 1..n to each row. Then we loop through them, one at a time, deleting them as they are processed, until there is nothing left in the table variable.
But here's what I would consider a better method:
CREATE TYPE dbo.code_list AS TABLE (code INT);
GO
CREATE PROCEDURE MyInsertSP (
#code_list dbo.code_list)
AS
BEGIN
INSERT INTO PRODUCTS (
[description],
price,
stock)
SELECT
i.[description],
i.price,
i.stock
FROM
INVENTORY i
INNER JOIN #code_list cl ON cl.code = i.code;
END;
GO
DECLARE #code_list dbo.code_list;
INSERT INTO #code_list SELECT code FROM rawproducts;
EXEC MyInsertSP #code_list = #code_list;
To get this to work I create a user-defined table type, then use this to pass a list of codes into the stored procedure. It means slightly rewriting your stored procedure, but the actual code to do the work is much smaller.
(how to) Run a stored procedure using select columns as input
parameters?
What you are looking for is APPLY; APPLY is how you use columns as input parameters. The only thing unclear is how/where the input column is populated. Let's start with sample data:
IF OBJECT_ID('dbo.Products', 'U') IS NOT NULL DROP TABLE dbo.Products;
IF OBJECT_ID('dbo.Inventory','U') IS NOT NULL DROP TABLE dbo.Inventory;
IF OBJECT_ID('dbo.Code','U') IS NOT NULL DROP TABLE dbo.Code;
CREATE TABLE dbo.Products
(
[description] VARCHAR(1000) NULL,
price DECIMAL(10,2) NOT NULL,
stock INT NOT NULL
);
CREATE TABLE dbo.Inventory
(
icode INT NOT NULL,
[description] VARCHAR(1000) NULL,
price DECIMAL(10,2) NOT NULL,
stock INT NOT NULL
);
CREATE TABLE dbo.Code(icode INT NOT NULL);
INSERT dbo.Inventory
VALUES (10,'',20.10,3),(11,'',40.10,3),(11,'',25.23,3),(11,'',55.23,3),(12,'',50.23,3),
(15,'',33.10,3),(15,'',19.16,5),(18,'',75.00,3),(21,'',88.00,3),(21,'',100.99,3);
CREATE CLUSTERED INDEX uq_inventory ON dbo.Inventory(icode);
The function:
CREATE FUNCTION dbo.fnInventory(#code INT)
RETURNS TABLE AS RETURN
SELECT i.[description], i.price, i.stock
FROM dbo.Inventory I
WHERE I.icode = #code;
USE:
DECLARE #code TABLE (icode INT);
INSERT #code VALUES (10),(11);
SELECT f.[description], f.price, f.stock
FROM #code AS c
CROSS APPLY dbo.fnInventory(c.icode) AS f;
Results:
description price stock
-------------- -------- -----------
20.10 3
40.10 3
Updated Proc (note my comments):
ALTER PROC dbo.MyInsertSP -- (1) Lose the input param
AS
-- (2) Code that populates the "code" table
INSERT dbo.Code VALUES (10),(11);
-- (3) Use CROSS APPLY to pass the values from dbo.code to your function
INSERT dbo.Products ([description], price, stock)
SELECT f.[description], f.price, f.stock
FROM dbo.code AS c
CROSS APPLY dbo.fnInventory(c.icode) AS f;
This ^^^ is how it's done.
I am writing migration script to migrate database. I have to duplicate the row by incrementing primary key considering that different database can have n number of different columns in the table. I can't write each and every column in query. If i simply just copy the row then, I am getting duplicate key error.
Query: INSERT INTO table_name SELECT * FROM table_name WHERE id=255;
ERROR: duplicate key value violates unique constraint "table_name_pkey"
DETAIL: Key (id)=(255) already exist
Here, It's good that I don't have to mention all column names. I can select all columns by giving *. But, same time I am also getting duplicate key error.
What's the solution of this problem? Any help would be appreciated. Thanks in advance.
If you are willing to type all column names, you may write
INSERT INTO table_name (
pri_key
,col2
,col3
)
SELECT (
SELECT MAX(pri_key) + 1
FROM table_name
)
,col2
,col3
FROM table_name
WHERE id = 255;
Other option (without typing all columns , but you know the primary key ) is to CREATE a temp table, update it and re-insert within a transaction.
BEGIN;
CREATE TEMP TABLE temp_tab ON COMMIT DROP AS SELECT * FROM table_name WHERE id=255;
UPDATE temp_tab SET pri_key_col = ( select MAX(pri_key_col) + 1 FROM table_name );
INSERT INTO table_name select * FROM temp_tab;
COMMIT;
This is just a DO block but you could create a function that takes things like the table name etc as parameters.
Setup:
CREATE TABLE public.t1 (a TEXT, b TEXT, c TEXT, id SERIAL PRIMARY KEY, e TEXT, f TEXT);
INSERT INTO public.t1 (e) VALUES ('x'), ('y'), ('z');
Code to duplicate values without the primary key column:
DO $$
DECLARE
_table_schema TEXT := 'public';
_table_name TEXT := 't1';
_pk_column_name TEXT := 'id';
_columns TEXT;
BEGIN
SELECT STRING_AGG(column_name, ',')
INTO _columns
FROM information_schema.columns
WHERE table_name = _table_name
AND table_schema = _table_schema
AND column_name <> _pk_column_name;
EXECUTE FORMAT('INSERT INTO %1$s.%2$s (%3$s) SELECT %3$s FROM %1$s.%2$s', _table_schema, _table_name, _columns);
END $$
The query it creates and runs is: INSERT INTO public.t1 (a,b,c,e,f) SELECT a,b,c,e,f FROM public.t1. It's selected all the columns apart from the PK one. You could put this code in a function and use it for any table you wanted, or just use it like this and edit it for whatever table.
How to construct an INSERT statement so that it would not generate the error "insert or update on table ... violates foreign key constraint" in case if the foreign key value does not exist in the reference table?
I just need no record created in this case and success response.
Thank you
Use a query as the source for the INSERT statement:
insert into the_table (id, some_data, some_fk_column
select *
from (
values (42, 'foobar', 100)
) as x(id, some_data, some_fk_column)
where exists (select *
from referenced_table rt
where rt.primary_key_column = x.some_fk_column);
This can also be extended to a multi-row insert:
insert into the_table (id, some_data, some_fk_column
select *
from (
values
(42, 'foobar', 100),
(24, 'barfoo', 101)
) as x(id, some_data, some_fk_column)
where exists (select *
from referenced_table rt
where rt.primary_key_column = x.some_fk_column);
You didn't show us your table definitions so I had to make up the table and column names. You will have to translate that to your names.
You could create a function with plpgsql, which inserts a row and catches the exception:
CREATE FUNCTION customInsert(int,varchar) RETURNS VOID
AS $$
BEGIN
INSERT INTO foo VALUES ($1,$2);
EXCEPTION
WHEN foreign_key_violation THEN --do nothing
END;
$$ LANGUAGE plpgsql
You can then call this function by this:
SELECT customInsert(1,'hello');
This function tries to insert the given parameters into the table foo and catches the foreign_key_violation error if occurs.
Of course you can generalise the function more, to be able to insert in more than one table, but your question sounded like this was only needed for one specific table.
Hello what is the easiest way to duplicate a DB record over the same table?
My problem is that the table where I am doing this has many column, like 100+, and I don't like how the solution looks like. Here is what I do (this is inside plpqsql function):
...
1. duplicate record
INSERT INTO history
(SELECT NEXTVAL('history_id_seq'), col_1, col_2, ... , col_100)
FROM history
WHERE history_id = 1234
ORDER BY datetime DESC
LIMIT 1)
RETURNING
history_id INTO new_history_id;
2. update some columns
UPDATE history
SET
col_5 = 'test_5',
col_23 = 'test_23',
datetime = CURRENT_TIMESTAMP
WHERE history_id = new_history_id;
Here are the problems I am attempting to solve
Listing all these 100+ columns looks lame
When new column is added eventually the function should be updated too
On separate DB instances the column order might differ, which would cause the function fail
I am not sure if I can list them once more (solving issue 3) like insert into <table> (<columns_list>) values (<query>) but then the query looks even uglier.
I would like to achieve something like 'insert into ', but this seems impossible the unique primary key constraint will raise a duplication error.
Any suggestions?
Thanks in advance for you time.
This isn't pretty or particularly optimized but there are a couple of ways to go about this. Ideally, you might want to do this all in an UPDATE trigger though you could implement a duplication function something like this:
-- create source table
CREATE TABLE history (history_id serial not null primary key, col_2 int, col_3 int, col_4 int, datetime timestamptz default now());
-- add some data
INSERT INTO history (col_2, col_3, col_4)
SELECT g, g * 10, g * 100 FROM generate_series(1, 100) AS g;
-- function to duplicate record
CREATE OR REPLACE FUNCTION fn_history_duplicate(p_history_id integer) RETURNS SETOF history AS
$BODY$
DECLARE
cols text;
insert_statement text;
BEGIN
-- build list of columns
SELECT array_to_string(array_agg(column_name::name), ',') INTO cols
FROM information_schema.columns
WHERE (table_schema, table_name) = ('public', 'history')
AND column_name <> 'history_id';
-- build insert statement
insert_statement := 'INSERT INTO history (' || cols || ') SELECT ' || cols || ' FROM history WHERE history_id = $1 RETURNING *';
-- execute statement
RETURN QUERY EXECUTE insert_statement USING p_history_id;
RETURN;
END;
$BODY$
LANGUAGE 'plpgsql';
-- test
SELECT * FROM fn_history_duplicate(1);
history_id | col_2 | col_3 | col_4 | datetime
------------+-------+-------+-------+-------------------------------
101 | 1 | 10 | 100 | 2013-04-15 14:56:11.131507+00
(1 row)
As I noted in my original comment, you might also take a look at the colnames extension as an alternative to querying the information schema.
You don't need the update anyway, you can supply the constant values directly in the SELECT statement:
INSERT INTO history
SELECT NEXTVAL('history_id_seq'),
col_1,
col_2,
col_3,
col_4,
'test_5',
...
'test_23',
...,
col_100
FROM history
WHERE history_sid = 1234
ORDER BY datetime DESC
LIMIT 1
RETURNING history_sid INTO new_history_sid;
I'm using PostgreSQL 9.0 and I have a table with just an artificial key (auto-incrementing sequence) and another unique key. (Yes, there is a reason for this table. :)) I want to look up an ID by the other key or, if it doesn't exist, insert it:
SELECT id
FROM mytable
WHERE other_key = 'SOMETHING'
Then, if no match:
INSERT INTO mytable (other_key)
VALUES ('SOMETHING')
RETURNING id
The question: is it possible to save a round-trip to the DB by doing both of these in one statement? I can insert the row if it doesn't exist like this:
INSERT INTO mytable (other_key)
SELECT 'SOMETHING'
WHERE NOT EXISTS (SELECT * FROM mytable WHERE other_key = 'SOMETHING')
RETURNING id
... but that doesn't give the ID of an existing row. Any ideas? There is a unique constraint on other_key, if that helps.
Have you tried to union it?
Edit - this requires Postgres 9.1:
create table mytable (id serial primary key, other_key varchar not null unique);
WITH new_row AS (
INSERT INTO mytable (other_key)
SELECT 'SOMETHING'
WHERE NOT EXISTS (SELECT * FROM mytable WHERE other_key = 'SOMETHING')
RETURNING *
)
SELECT * FROM new_row
UNION
SELECT * FROM mytable WHERE other_key = 'SOMETHING';
results in:
id | other_key
----+-----------
1 | SOMETHING
(1 row)
No, there is no special SQL syntax that allows you to do select or insert. You can do what Ilia mentions and create a sproc, which means it will not do a round trip fromt he client to server, but it will still result in two queries (three actually, if you count the sproc itself).
using 9.5 i successfully tried this
based on Denis de Bernardy's answer
only 1 parameter
no union
no stored procedure
atomic, thus no concurrency problems (i think...)
The Query:
WITH neworexisting AS (
INSERT INTO mytable(other_key) VALUES('hello 2')
ON CONFLICT(other_key) DO UPDATE SET existed=true -- need some update to return sth
RETURNING *
)
SELECT * FROM neworexisting
first call:
id|other_key|created |existed|
--|---------|-------------------|-------|
6|hello 1 |2019-09-11 11:39:29|false |
second call:
id|other_key|created |existed|
--|---------|-------------------|-------|
6|hello 1 |2019-09-11 11:39:29|true |
First create your table ;-)
CREATE TABLE mytable (
id serial NOT NULL,
other_key text NOT NULL,
created timestamptz NOT NULL DEFAULT now(),
existed bool NOT NULL DEFAULT false,
CONSTRAINT mytable_pk PRIMARY KEY (id),
CONSTRAINT mytable_uniq UNIQUE (other_key) --needed for on conflict
);
you can use a stored procedure
IF (SELECT id FROM mytable WHERE other_key = 'SOMETHING' LIMIT 1) < 0 THEN
INSERT INTO mytable (other_key) VALUES ('SOMETHING')
END IF
I have an alternative to Denis answer, that I think is less database-intensive, although a bit more complex:
create table mytable (id serial primary key, other_key varchar not null unique);
WITH table_sel AS (
SELECT id
FROM mytable
WHERE other_key = 'test'
UNION
SELECT NULL AS id
ORDER BY id NULLS LAST
LIMIT 1
), table_ins AS (
INSERT INTO mytable (id, other_key)
SELECT
COALESCE(id, NEXTVAL('mytable_id_seq'::REGCLASS)),
'test'
FROM table_sel
ON CONFLICT (id) DO NOTHING
RETURNING id
)
SELECT * FROM table_ins
UNION ALL
SELECT * FROM table_sel
WHERE id IS NOT NULL;
In table_sel CTE I'm looking for the right row. If I don't find it, I assure that table_sel returns at least one row, with a union with a SELECT NULL.
In table_ins CTE I try to insert the same row I was looking for earlier. COALESCE(id, NEXTVAL('mytable_id_seq'::REGCLASS)) is saying: id could be defined, if so, use it; whereas if id is null, increment the sequence on id and use this new value to insert a row. The ON CONFLICT clause assure
that if id is already in mytable I don't insert anything.
At the end I put everything together with a UNION between table_ins and table_sel, so that I'm sure to take my sweet id value and execute both CTE.
This query needs to search for the value other_key only once, and is a "search this value" not a "check if this value not exists in the table", that is very heavy; in Denis alternative you use other_key in both types of searches. In my query you "check if a value not exists" only on id that is a integer primary key, that, for construction, is fast.
Minor tweak a decade late to Denis's excellent answer:
-- Create the table with a unique constraint
CREATE TABLE mytable (
id serial PRIMARY KEY
, other_key varchar NOT NULL UNIQUE
);
WITH new_row AS (
-- Only insert when we don't find anything, avoiding a table lock if
-- possible.
INSERT INTO mytable ( other_key )
SELECT 'SOMETHING'
WHERE NOT EXISTS (
SELECT *
FROM mytable
WHERE other_key = 'SOMETHING'
)
RETURNING *
)
(
-- This comes first in the UNION ALL since it'll almost certainly be
-- in the query cache. Marginally slower for the insert case, but also
-- marginally faster for the much more common read-only case.
SELECT *
FROM mytable
WHERE other_key = 'SOMETHING'
-- Don't check for duplicates to be removed
UNION ALL
-- If we reach this point in iteration, we needed to do the INSERT and
-- lock after all.
SELECT *
FROM new_row
) LIMIT 1 -- Just return whatever comes first in the results and allow
-- the query engine to cut processing short for the INSERT
-- calculation.
;
The UNION ALL tells the planner it doesn't have to collect results for de-duplication. The LIMIT 1 at the end allows the planner to short-circuit further processing/iteration once it knows there's an answer available.
NOTE: There is a race condition present here and in the original answer. If the entry does not already exist, the INSERT will fail with a unique constraint violation. The error can be suppressed with ON CONFLICT DO NOTHING, but the query will return an empty set instead of the new row. This is a difficult problem because getting that info from another transaction would violate the I in ACID.