After doing C-c / to create a sparse tree, move the cursor to some interesting place and C-c C-c to remove highlights I'd like to be able to collapse all levels but the current one.
Is there some way doing it? I'd like to maintain the cursor positioned in the same place.
You can call org-cycle with a C-u prefix to collapse all trees and
then call org-reveal: C-u <TAB> C-c C-r. (The prefix actually
cycles the whole buffer between 3 states, but after creating a sparse
tree, this seems to always go to overview state first.) Since you'll
be adding a C-c C-c at either end to remove the highlights, you
could wrap all of this into a single command that you give a shorter
keybinding.
(defun org-sparse-finish ()
(interactive)
(org-remove-occur-highlights)
(org-overview)
(org-reveal))
Is there a way in org-mode to mark region (one or few words) and make them bold/italic?
Currently, if I want to turn bar into bold face, I have to move the point before the b add * and then navigate the point right after r and add another *. I want to be able to mark the whole word bar, hit something like C-c C-f C-b (did someone said AUCTeX?) and obtain *bar*.
org-emphasize does what you need. It is bound to C-c C-x C-f and then you suppy either the marker (* or _) or the first letter of the corresponding HTML tag (e.g. e for <em>).
Documentation here: http://orgmode.org/worg/doc.html#org-emphasize
I've noticed that C-e <END> or M-x move-end-of-line doesn't always move the cursor to the end of the line.
Specifically this happens lines wider than the current window, it appears to move to some arbitrary point midway along the line.
Does anyone know if this is expected and more importantly, how to switch it off and make move-end-of-line, really move to the END of the line?
(Note: this is also happening in regular non-macro use.)
Emacs version in this example is GNU Emacs 23.1.97.1 (i386-mingw-nt6.1.7601)
Update.
The cursor is moving to the char that is on the edge of the window, (the display then re-centers around the cursor.)
Make sure visual-line-mode is off for the buffer.
Agree with #Slomojo here (it seems I cannot comment yet).
To add, here is the quote from the Emacs manual:
In Visual Line mode, some editing commands work on screen lines instead of logical lines: C-a (beginning-of-visual-line) moves to the beginning of the screen line, C-e (end-of-visual-line) moves to the end of the screen line, and C-k (kill-visual-line) kills text to the end of the screen line.
C-e is mapped to end-of-visual-line, the best solution isn't to deactivate visual-line-mode (don't do that especially if you're coding) but to remap C-e to end-of-line in your init file like this:
(global-set-key (kbd "C-e") 'end-of-line)
Of course I advise you to do the same for C-a and to remap it to beginning-of-line.
If you think you need to use end-of-visual-line and beginning-of-visual-line they're still mapped to end and home buttons respectively.
I know how to go to a variable definition in Emacs using semantic-mode. It works well in a single file (I think it doesn't work if the definition is in another file). Using C-c , j, I can go to the definition of the variable, but, how do I jump back to the previous line? Currently I use display Symref C-c , g, and select the displayed symref.
Is there any straight method?
Use:
C-u C-space or C-u C-#
If you want to navigate back between buffers, you can use:
C-x C-space or C-x C-#
This makes Emacs jump to the mark (and set the mark from position popped off the local mark ring) which has usually been set by a previous jump command.
Notepad++ has a convenient feature: if you select a word in your text (not necessarily a keyword), the word is highlighted throughout the text. Can this be done in Emacs as well? And if so, how?
It doesn't necessarily have to work exactly like Notepad++ (i.e., via selection); ideally, I would like to set up a key binding that causes all occurrences of the word under cursor to be highlighted.
It would be great if the highlights were permanent, i.e., moving point away from a highlighted word should not cause the highlight to be removed.
Also, it would be useful if there was a solution that made it possible to navigate between highlights (using custom key bindings).
The hi-lock suggestions are good. I think it's easier to use the M-x versions, though:
M-x highlight-regexp RET <REGEXP>
M-x highlight-phrase RET <REGEXP>
highlight-phrase is just a bit of sugar around highlight-regexp that ignores case and translates a space in the regex to match arbitrary whitespace. Handy.
Maybe highlight-symbol.el at http://nschum.de/src/emacs/highlight-symbol/ is what you are looking for:
Type C-s, then type the current word or type C-w. As a bonus, you can now hit C-s again to search for the word.
This is called incremental search.
What I use is idle-highlight
http://www.emacswiki.org/emacs/IdleHighlight
M-x idle-highlight sets an idle timer that highlights all occurences in the buffer of the word under the point.
To enable it for all programming modes, in ~/.emacs.d/init.el:
;; highlight words
(add-hook 'prog-mode-hook (lambda () (idle-highlight-mode t)))
Light-symbol will highlight whatever symbol point is over.
Alternately, you can use occur, which lists all lines matching a regexp. It's useful to quickly see all functions in a class.
Nobody mentioned symbol-overlay mode. It's basically a better rewrite of highlight-symbol-mode. "Better" as in, lacks bugs of original highlight-symbol (such as, temporary highlight getting stuck, or the temporary highlight disappearing for moving inside the highlighted word; or not being able to highlight symbols like *), better integrated, and maintained. See "Advantages" paragraph of its README.
You can install it as usual, with M-xpackage-install (make sure to update package list beforehand with package-list-packages). For reference, at the bottom I attached code I use to enable the mode and disable a few of the more advanced features which you may or may not want.
Notepad++ has a convenient feature: if you select a word in your text (not necessarily a keyword), the word is highlighted throughout the text. Can this be done in Emacs as well? And if so, how?
Once you enable overlay-symbol, occurrences on the screen will be shown for every word that you put cursor upon after a timeout (timeout by default is 0.5s, can be configured with symbol-overlay-idle-time variable). If a word don't get highlighted, this means there's just one match on the screen (the one you put cursor upon), hence there's no need to highlight it.
It would be great if the highlights were permanent, i.e., moving point away from a highlighted word should not cause the highlight to be removed.
To highlight the word under cursor permanently there's a function symbol-overlay-put. To unhighlight call it once again.
In my config example it's bound to Logo+` key.
(require 'symbol-overlay)
(defun enable-symbol-overlay-mode ()
(unless (or (minibufferp)
(derived-mode-p 'magit-mode)
(derived-mode-p 'xref--xref-buffer-mode))
(symbol-overlay-mode t)))
(define-global-minor-mode global-symbol-overlay-mode ;; name of the new global mode
symbol-overlay-mode ;; name of the minor mode
enable-symbol-overlay-mode)
(global-symbol-overlay-mode) ;; enable it
(global-set-key (kbd "s-`") 'symbol-overlay-put)
(setq symbol-overlay-ignore-functions nil) ;; don't ignore keywords in various languages
(setq symbol-overlay-map (make-sparse-keymap)) ;; disable special cmds on overlays
This may not be as nice as what you were hoping but if you put
(global-hi-lock-mode 1)
in your .emacs file then you can type C-x w h REGEX <RET> <RET> to highlight all occurances of REGEX, and C-x w r REGEX <RET> to unhighlight them again. Again, not as elegant as you'd probably like, but it'll work.
Try http://www.emacswiki.org/emacs/msearch.el
All occurences of the text selected with the cursor are highlighted.
You have to drag over the string which you want to highlight. That enables you to easily change the selection without changing the highlight.
If you want to preserve the highlighting of a string you can freeze it.
You can enslave a buffer to another buffer. Text selected in the master buffer will also be highlighted in the slave buffer. That is useful for comparing buffers.
It is also useful for taking notes in one buffer while you investigate the text in another one. You can have a collection of keywords in the notes buffer. Drag over such a keyword and its occurences in the investigated text will be highlighted.
I am using this stuff for years now. I added the freezing quite recently. So, maybe something is broken. If this is the case leave me a note on http://www.emacswiki.org/emacs/msearch or here.
Check Interactive Highlighting
Should be:
C-x w h word <RET> <RET>
Try iedit. It highlights the word at point and lets you edit all occurrences of it easily. With an additional keystroke (C-'), it hides all the lines without that word in it. Very handy!
Commands in library highlight.el
let you (un)highlight text matching a regexp (in this case a symbol), using overlays or text properties. You can cycle among the occurrences. Highlighting can be temporary or persistent. (more info).
This maybe won't highlight but will search for a word without you needing to type it...
when you've reached the word you wanted to search, C-S, then read the full word with C-W then you can C-S and it will search for it. In my Emacs it also highlights all instances in the document.
This package available in Melpa works, you can customize the highlight style as well.
https://github.com/ignacy/idle-highlight-in-visible-buffers-mode