I was playing around with my VSCode Settings Sync, and accidentally replaced my settings.json file with another one from a fresh install, as a consequence, I lost my entire settings.json configuration.
Is there a way to recover the lost settings.json file?
I checked my backups, however, it seems that I one cannot go back into the /Users/mf/Library/Application Support/Code/User/Sync folder.
Yes you can get them back.
They are saved on the hard-drive if your settings are set to their default values.
The universal method (works the same for all systems) is to hit the [F1] key, then type the command below into the input, until you see the option. When you do see the option click on it to open the directory.
Settings Sync: Open Backups Folder
The other option you have is to view the data in VSCode using the following VSCode command from your quick input using the [F1] key followed by the same instructions for the command above.
Settings Sync: Show Synced Data
There should be several saved versions of your settings, unless you have changed your configuration for settings sync in the settings menu, or in your user/workspace settings.json file.
Personally I like to just open backup folders and pullout what I need. If you are like me, and you use Ubuntu then the path below is the path used by VSCode to store backed-up keybindings & Settings.json instances. You can pullout what ever you need from that directory.
~/.config/Code/User/settings.json
If you need to restore the backed up files, you can visit this link, it demonstrates how to return to a previous editor configuration:
RESTORE PREVIOUS VS CODE CONFIGURATION:
https://code.visualstudio.com/docs/editor/settings-sync#_restoring-data
I have this problem with Visual Studio Code for Windows 10: I can't see the NPM scripts in the explorer sidebar.
I deleted all the extensions, uninstalled VS Code, and installed the latest version of VS Code again with no custom options and no extensions, but it didn't solve my problem; the NPM scripts menu does not appear.
How could I fix this so that the NPM Scripts menu option is shown again?
Few places to look for the NPM-Scripts explorer :
The npm-scripts explorer can be enabled or disabled with the below settings, in VSCode's settings.json:
"npm.enableScriptExplorer": false
Default value is false, change to true and it should work. Try restarting VSCode for changes to take effect(although a restart is not often required) if it doesn't show up.
Another very hard to notice place is the three dots ... in the top right corner of your project explorer (verify if NPM scripts is checked). This is something which I had experienced personally for a different extension.
Open "File > Preferences > Settings"
Search "npm script"
Toggle "Npm: Enable Script Explorer"
Close VSCode; reopen
Version 1.59.1
Go to View -> Open View and type: npm scripts:
Appreciate I may be a bit late to answer this question. For me, this was due to npm scripts not being selected to display in explorer. Once I had selected the box, the npm scripts window was available to view.
Hopefully, this has just been fixed - see https://github.com/microsoft/vscode/issues/120279#event-4631666095 and https://github.com/microsoft/vscode/issues/120279#issuecomment-824950294 seeking test verification.
It is in the Insiders now and in Stable early May, 2021. It fixed it for me.
View/Open View...
Type NPM
Click on NPM Scripts
If it still isn't working, see https://github.com/microsoft/vscode/issues/119868
Is your package.json at the root level? Does it make any difference if you open your package.json first, and then check for the view? Or try opening another .json file (or even the Release Notes has been reported as working) and then do a Reload. Otherwise, add your info to the issue.
Work around: If I leave an editor tab open with my package.json (I have one in the root, and in two other places), close and re-open VSC, then it seems to 'find' the NPM View.
TL;DR;
My VSC (1.55.2) is inconsistently showing / not showing the NPM View.
When it starts without the view, I cannot use View->Open "npm".
No option in Explorer options (...)
When it starts with the view, View->Open has a result for "npm".
Has option in Explorer options (...)
Bug report here: https://github.com/microsoft/vscode/issues/120279
Try to delete package-lock.json and restart VSCode.
In my case it worked.
It happens to me sometimes when I open VSCODE.
Whenever it happens I simply load a package.json file.
The NPM SCRIPTS menu still appears when I close the package.json file.
If that doesn't do the trick, try installing NPM-Scripts extension.
If it worked normally before but now it does not, and you have the extension installed and enabled. Then all you have to do is open your package.json file and it will be available again.
I guess this weird behavior happens when you disable all your extensions or may happen if you're installing/removing extensions from a remote container
You can install NPM-Scripts extension which does the same as npm scripts functionality which was build into vscode.
Visual Studio Code source control panel is empty when I click on it. Nothing to expand and nothing to click on.
Things I've tried:
Uninstalled/Reinstalled Git
Uninstall/Reinstalled VS Code
Removed extensions folder
Open your project with cmd.
> cd your-folder-location
> code . -n
It worked for me
Dude, just lost an hour because my SCM in VSCode randomly stopped showing anything today. I restarted everything, tried git init, everything on the forums. Made sure Git built in extension is enabled, mine was already enabled so I was totally lost.
All I had to do was disable and then reenable the built in Git extension. and it fixed it.
Go to Extensions.
Filter by "built in".
Click the gear icon by Git, and click disable.
Then click it again, and click enable.
Here is a screenshot reference
In my case, somehow, the Source Control Repositories option, available under the 3 dots ... on the SOURCE CONTROL tab, was no longer selected.
All I had to do was press the ... and select Source Control Repositories, then select the correct repo, and all the changes were again listed.
I had a similar issue. It seems vs code has two source control extensions. When I clicked View -> SCM it opened an extension with changes displaying.
source control extension 1
source control extension 2
I had this problem 2-3 times for the last 2 years (OS -> Linux Mint). The changes on any file didn't appear to the source control nor have they been marked on the line I've edited. When manually go to "Source control" and click on the refresh button they appear but the lines that I had change didn't light up (there were no visual marking on the files after editing them). This happened when I switched to a different branch while the workspace was open to the 2 monitors at the same time. Or when working on several projects (opened 2-3 or more VS Code instances). The scariest thing was that it didn't work not only for one repository(project) but for all of them. I've read alot on the subject and tried everything that I found and think of. There is some issue with git path mapping or something.
The thing that I tried:
reload VS Code
restarting VS Code
disable all extensions
enable/disable all git related options in (file -> preferences -> settings)
deleting (folders and files) and cloning the repository
updating git
removing and installing git
restarting PC (don't judge me I was desperate)
But the only solution that worked for me was:
open VS Code (if open, don't close it)
go to the directory where you keep your repositories (not from VS Code but from you file explorer).
go one folder above it (if you are in .../{{some folder}}/{{you repos}}, go to ../{{some folder}})
then open you repositories containing folder (/{{you repos}}) by right click -> open with VS Code
wait until everything loads. The Source Control will mark alot of changes, don't worry about it.
then close VS Code (all windows (instances), because it will open a new instance)
after that go to the directory where you keep your repositories again and right click and open with VS code the repository of you choice. Now at this point the Source control will start working properly.
What worked for me was going to my "code" folder where I keep all my repos, right-clicking on the folder containing the repo I want and opening that folder with VS Code.
The VS Code window for this specific repo was closed. I did have another window for a different repo open. As soon as the window opened, the changes showed up in source control and I was able to commit, push and everything else like normal.
I faced this problem when I opened a repo in a directory inside symlink.
My solution: just open this directory in original destination without any symlinks
I had this problem in a repository not as a problem from config but because I had a coverage folder with thousands of files not tracked and it seemed to slow the process of checking that out too much.
So I added that folder to .gitignore and it started working again.
Restating my Vscode And Giving time to load properly Solved my Problem
I had the same problem. What I did was:
Open another folder with File -> Open Folder...
Close the VSC
Open VSC
Open the original folder with File -> Open Folder...
After this I saw that the source control started loading and my changes came back.
Hope this works for you.
I couldn't see any changes in while trying git status. I opened changed files in text editor and they were not changed either. That lead me to conclusion that changes can't be seen by the system (and therefore by git).
The Autosave option was disabled, simply saving the changes helped.
That was my beginning with VSC, in Pycharm never had such problem.
I had this problem, because I was changing files one folder down from where I opened Visual Studio Code.
Solution- open Visual Studio Code without a location, File/Open Folder - open the folder I am directly working out of.
Unstaged changes now show in the direct folder I'm working in. Unstage changes previously auto-staged by Visual Studio Code when working on a nested project directory to see them (open a Terminal and run git reset).
I encountered the same issue, and I fixed that by removing the files.watcherExclude property in settings.json file.
Because the value of files.watcherExclude became { "**/**/*": true } somehow.
// settings.json
// remove or comment next line
// files.watcherExclude: { "**/**/*": true }
For me, the files were in WSL (Windows subsystem for linux) but I was not opening the folder as such.
in the bottom left, click the green >< symbol, then click "reopen folder in WSL"
VSC remote mode image
presto.
Go to View -> Terminal
cd to root folder, and run git status and see if you have any errors
I had a unsafe repository fatat error, as my repo was on a network drive. Did as suggested by git to add an exception and it fixed the issue.
close vscode
moved local Code config folder as backup (~/.config/Code/)
reopen vscode (this will still show problem)
close and reopen vscode (this will show db re-write issue but it will re-create config folder.)
this solved my problem. this reset many of my settings but It can be checked from config backup.
In setting check Git: Autorefresh
I experience this problem when I right click a folder and open it up with VS code. Instead now I start VS code from the start menu and after that I use File -> Open Folder option.
I experienced this issue with VSCode V1.70.1, all I did is just closing VSCode completely and open a new instance and I could find git changes appears simultaneously as expected.
If running into this issue on a Mac, make sure you are running your instance of Visual Studio Code from your Applications folder and not your Downloads folder. I managed to fire up an instance from the wrong folder and this prevented my Source Control from being able to properly load git info and also caused Visual Studio updates to fail. More on the issue can be found here.
Here is another possible solution for Linux users:
In my case, it was only not showing lines changed with the file open. Source control tab was showing fine.
I have a symlink from /var/www to /mnt/{hdd-uuid}/www. When I created my workspace, it was using the path /var/www/project-folder, instead of the full path, and this was giving me the error.
I opened my .code-workpsace file in another text editor and changed the references in the JSON from ../../../../var/www/project-folder to /mnt/{hdd-uuid}/www/project-folder, then reopen VS Code. Close all file tabs open and, when you open again a modified file it will show the lines changed.
It is possible that you need to trust the repo again.
Try opening project or folder which contains git files. Later try opening your wanted folder. This sorted the issue for me.
Double-check git is actually installed on your system. I just did a fresh install of Windows 11 the other day, and although one of the development tools I installed thereafter downloaded and supposedly installed git in Windows, actually, it never installed it. Fail!
I fixed this issue by toggled-on the AutoSave feature in VSCode via File > AutoSave. I noticed that the badge on the github does not show up until the file is actually saved first.
What worked for me was that I was forgetting to save, so just enabled autosave option.
File > Auto Save (check)
Open Visual Studio code -> View -> Appearance -> Show activity bar
Is it possible to write a python or bash script such that when I run it from the integrated terminal in vscode it closes the current window?
This may sound useless, so let me explain one use case in case you're wondering why I need to do this, and maybe you also have other suggestions to achieve it. I have a python script that allows me to easily rename a github repo name using github's api: something like rename-github-repo newname, which automatically detects the git project directory, makes the changes on github via the api, and renames the directory in my local filesystem as well. After the directory rename, my current vscode window is messed up because it references the old directory, so I'd like to close it and open a new one with the new directory as part of the script rename-github-repo so I don't have to do it manually.
I work in multiple projects spread in multiple folders on macOS.
I usually start working on them by running:
cd ~/workspace/project-a
code .
That always causes a new window to be open with the last files I worked on that project. My next move is to close all tabs, if the editor was split I have to do that as many times as split editors I had.
Is there a setting that would allow me to always start on a clean state?
My settings that I believe are related to this issue are the following:
"window.restoreWindows": "none",
"files.hotExit": "onExitAndWindowClose",
I tried off for files.hotExit but the behaviour remained the same.
Also if possible, where is this information stored (open files for given folders)? Is that a dot file inside the folder or elsewhere inside Visual Studio Code installation?
Make sure you are on the latest VSCode (1.24.1 as on 18-Jun-18)
Then make sure you have below in your settings
"window.restoreWindows": "none",
Make sure there are no JSON errors in your custom settings file. This also could cause the settings to be not loaded at all.
Next try launching the folder using
code -n .
Also $HOME/Library/Application Support/Code/Backups/workspaces.json contains the information of open workspaces
Also refer to below thread
Visual Studio Code always reopens previous file or folder
You could try, in addition of the setting "window.restoreWindows": "none" to start with:
code -n
That would force a new VSCode Window to be opened.
Also if possible, where is this information stored (open files for given folders)?
See issue 3884
# Windows
%APPDATA%\Code\Workspaces
# Mac
$HOME/Library/Application Support/Code
$HOME/Library/Application Support/Code/Workspaces
$HOME/Library/Application Support/Code/Backups/workspace.json
Window > Open Folders In New Window
set it to off