I am fetching a stored procedure to the report having two columns as date and non business day. I need to create a year wise calendar for the year which is getting fetched from stored procedure. Each page will have a calendar of a year with 12 months along with days.
Well, you would need a dataset with a Date (Day and Year at least) and a corresponding value for this Day. Then simply add a matrix in your report. For the columns textbox chose the Date (Day) and for the rows textbox chose the Date (Year). In the data textbox use your value. If you load it, it will look like calender because the Days get brocke down by Year.
Related
I have a data set spanning 2 years and is updated daily, created a dashboard to give a view of incidents by date group. I have created a parameter using date trunc for Day/Week/Month/Quarter/Year. This is in Tableau.
I am trying to get the parameter to show a Week to date, Month to date and so on view. IE if on Weds 15th Dec I selected the weekly view, it would only show data for every week in the data set for Sat-Weds (My weeks go Sat-Fri) or the monthly view every month between 1st-15th
Ideally I am wanting this as a simple parameter for a drop down menu, I can do the week to date stuff as a rolling sum restarting every week in a separate table, but for ease I just need a date group function that will allow to do this.
Any suggestions would be appreciated.
Cheers
Pete
The solution is 5 parts:
Date Part Parameter
Max date [Max Date]
Dynamic date part of the Max date [Dynamic Date Part Max]
Dynamic date part of the historical dates [Dynamic Date Part]
Filter those date parts <= the Max date [Dynamic Date - Lass than Max]
Date Part Parameter
Max Date
This is the calculation you'd use with your dataset to find the max date.
{ MAX([Order Date]) }
In order to create a good example, I'm going to set my Max date to a specific date the falls in the middle of a week, in the middle of a month and middle of the year. I'm going use June 13th, 2018 as my Max Date.
So, if you want to follow along you can use the below date as your max date. You can also use this data set if you'd like.
DATE(#2018-06-13#)
Dynamic date part of the Max date
DATEPART([Select Date Part], [Max Date])
Dynamic date part of the Historical dates
DATEPART([Select Date Part], [Order Date])
Filter on Historical dates parts <= the Max Date
[Dynamic Date Part] <= [Dynamic Date Part Max]
Now that we have all the pieces we need let's check to make sure they are working as we would expect.
Looks like we're seeing all the days of the month that are <= the 13th.
When we change it to Day of the Week we see only the days of the week <= the 4th day of the week which is Wednesday when the week starts on Saturday.
Now let's calculate the running sum of sales along our dynamic date part to better help you with your example.
Drag the measure you want to calculate the running sum onto the label, then create a quick table calculation. We'll next need to edit this table calculation as so.
You'll then see your calculation working as you would expect.
Hope this was helpful. Happy vizzing!
I have a SSRS report that has typical Start Date / End Date parameters that will filter out Sales Order information based on the OrderDate field. With this report, I have a subreport. This subrebort is basically nothing more than an aggregation of the same info, by month. This aggregate information should be from the first day of the month, one year prior, through the last day of the End Date's parameters month. This does not take the main subreports Start Date parameter into consideration at all.
This is where it gets a little tricky. For example, lets say I made the start date / end date parameters on my main report:
10/15/2016 - 11/15/2016
(just remember, for this purpose, the start date is irrelevant)
I would want the subreport to show the sales totals, per month, for the ENTIRE month of December 2015 through the ENTIRE month of November 2016, even though my end date was 11/15/2016.
If I were to put in those same dates for my parameters in the report right now, for the aggregation of December 2015, I would only get sales from the 15th through the 31st. Currently I have my subreport to filter on the OrderDate by:
Fields!OrderDate.Value>= DateAdd(DateInterval.Month, -12,Parameters!EndDate.Value)
I know that this filter is not currently set up to have an end date for the parameter, just a greater than argument, which is wrong since I want the 12 month history to stop at the last day of the month for the month of my End Date parameter, but I don't know how to make that happen either.
I hope I have explained this well. Any help on this would be greatly appreciated.
You can set a filter to get only dates between a specific range in your subreport dataset, tablix and some visualizations:
In DataSet properties or Tablix Properties in the Filter tab use these settings:
In the Value textboxes you should use the expressions to calculate your date range.
StartDate
=DateSerial(Parameters!EndDate.Value.Year-1,Parameters!EndDate.Value.Month,1).AddMonths(1)
EndDate
=DateSerial(
Parameters!EndDate.Value.Year,Parameters!EndDate.Value.Month,1).AddMonths(1).AddDays(-1)
It should filter your data from 12/01/2015 to 11/30/2016 if your EndDate parameter is set to 11/15/2016
Let me know if this helps.
In any time series chart, it looks like Tableau defaults to the first day of the month on the tick marks.
Is there a way for Tableau to show the last day of the month instead?
You can sort of force it by going into "Edit Axis", starting it on a month end, and 1 as the monthly interval. However, this is not a dynamic process and would require that I update this every time I had new data.
Anyone have any ideas? Thank you!
If in your data series you want each data point to represent the whole month, and you just want to label it with the last date of that month, then this workaround might work:
use calculated field to coerce all dates in the month to the last date of that month: DATEADD('day',-1,DATEADD('month',1,DATETRUNC('month',[Order Date])))
use this field as date in your time series
use 'More -> Custom -> Month / Day /Year' as display option for this field
I am presently working on tableau worksheets, the data is based on sales and order, it contains months, year, KPI, data value as some of its corresponding fields , what I am trying to do is when any month is selected it should return all the measure and sum of data value of that month as well as all the months before that particular month.
I'm relatively new at Qlikview and wanted to compare some data from a selected year with its previous year.
In Qlikview I have a table in which i show the count of all the contacts there have been with the customer per mount [=count(contactsID)] with the dimension [contacts.month]
I want to show an other expression with the contacts with customers in the same month a year before.
So if my table shows all the contacts from jan-2014 until dec-2014 I want a bar next to every month with the months jan-2013 until dec-2013
for example jan-2013/jan-2014; feb-2013/feb-2014; etc
some extra information:
In the database is a date saved. In Qlikview i load that as:
load
date as contact.date,
Year(date) as contact.year,
Month(date) as contact.month,
Day(date) as contact.day;
If anybody could help i would be very grateful! Thanks to all of you in advance!
I got the answer on the Qlikview community!
Add expression as:
count({<contact.year={$(=contact.year-1)}>}ContactID)
http://community.qlik.com/message/517136#517136
You can solve this problem at the script side while loading data. So that you can compare year to date data with previous year with until corresponding month.
Transaction_Table:
LOAD date,productID,amount
FROM data.qvd;
concatenate
Load AddYears(date,1) as date,productID,amount_1
Resident data where date<=AddYears($(=max(date)),-1);
There will be two coloumns "amount" is current date's data and "amount_1" is previous year's same day data.