I have installed email router server on production server where Dynamics crm has been installed but when try to reply any mail, the result shows pending send and an error shows in event viewer. I am trying to send mail using a SMTP Relay server. Although, the same application with in same domain and same settings on testing server is working fine.
The event viewer error log is as given below.
Description:
61042 - An error occurred while processing the outgoing email message with subject "RE: test " for SMTP: http://172.26.4.123/TESTCRM for
delivery through 172.26.4.124.
System.Security.Authentication.AuthenticationException: The remote
certificate is invalid according to the validation procedure.
Please suggest some solutions.
Welcome to StackOverFlow.
Hope you are doing well. Let try some steps to troubleshooting the issue:
Set the E-mail Router Outgoing profile to Anonymous.
a. Launch the Microsoft Dynamics CRM 2011 E-mail Router.
b. Open the Outgoing SMTP profile.
c. In the Authentication Type drop down, choose Anonymous.
d. Click Publish.
Updated the settings for the outgoing profile of the email router to use SSL and matched the name of the SMTP server with the name of the certificate. In this case, the proper name was the FQDN of the Exchange server.
** SSL for SMTP is not supported in Ex2010, so if this is your escenario then: unchecked “SSL” for SMTP, saved CRM router settings.
Please find below articles regarding your issue.
https://support.microsoft.com/en-us/help/954584/error-message-when-you-try-to-test-access-from-the-microsoft-dynamics
https://community.dynamics.com/crm/f/117/t/99471
https://community.dynamics.com/crm/f/117/t/231301
Dynamics CRM Email Router Troubleshooting 101 – Outgoing Emails
Related
I am using Umbraco Forms v.10 and I'm trying to set up a workflow of sending email (without template) when the form is submitted.
The form works, I can see the entries at Umbraco's backoffice but I did not get any email.
At Logs I get the following error at Logs:
"There was a problem sending an email to {Email} from Workflow for Form {FormName} with id {FormId} for Record with unique id {RecordId}","#l":"Error","#x":"MailKit.Net.Smtp.SmtpProtocolException: The SMTP server has unexpectedly disconnected."
The SMTP is the following:
SMPT
Did I miss something?
I cannot actually find any documentation about that at Umbraco.
Your SMTP settings are most likely incorrect. If you're running your site on your local computer, it's very unlikely you have an SMTP server on "localhost". If your Umbraco site is on a shared host, it's also unlikely the SMTP server is "localhost". So I think your SMTP settings are incorrect and that's why Umbraco is unable to send the email for you.
Find out your webhosts SMTP details, if your webhost was Simply.com, the credentials would be something along the lines of:
Host: smtp.simply.com
Port: 25
Can someone help me out to this below issue. We done change smtp to office365 but after change the smtp host, we start getting below issue
Transaction failed. The server response was: 5.2.0 STOREDRV.Submission.Exception:SendAsDeniedException.MapiExceptionSendAsDenied; Failed to process message due to a permanent exception with message Cannot submit message.
The email address used in the SMTP protocol (MAIL From:<salesperson1#contoso.com>) must be identical to your office365 account name, i.e. "salesperson1#contoso.com".
Source: check this Microsoft support page, related to printers and scanners:
"Your printer or application must send email from the same address that you entered logon credentials for during email setup. If the printer or application tries to send email from a different account, this results in an error similar to:
5.7.60 SMTP; Client does not have permissions to send as this sender.
For example, if you entered login credentials for sales#contoso.com in your application settings, but the application tries to send emails from salesperson1#contoso.com, this is not supported. For this scenario, use Microsoft 365 or Office 365 SMTP relay instead."
In our case, the address mismatch causes office365.com to reply with the following error message:
554 5.2.0 STOREDRV.Submission.Exception:SendAsDeniedException.MapiExceptionSendAsDenied; Failed to process message due to a permanent exception with message Cannot submit message.
and has been resolved as described.
If using Asp.net/c#, then ensure the sender id used in NetworkCredential is similar to the from email address as below:
MailServer.Credentials = new System.Net.NetworkCredential(SenderId, SenderPass);
MailAddress from = new MailAddress(SenderId);
I have installed smtp pro from mangento connect manager,configured for my general settings for custom smtp.
When I go to my sales > order and send order email, I get message "email sent", though I don't receive any email.
while I run the test I get the error message:
"Exception message was: 5.7.1 Client does not have permissions to send as this sender."
Is this message from the mail server? Or have I done something wrong with extension setup itself?
Help would be appreciated.
That's coming back from your SMTP server - looks like it's restricting the
"from:" header values.
You would need to configure "Send As" permission on your mail server to allow your agent accounts to send email as your outbound mailbox account.
Below are instructions on how to do it in some of the more common email server/providers.
Exchange 2007 &2010
http://technet.microsoft.com/en-us/library/bb676368%28v=exchg.141%29.aspx
Office365:
http://support.microsoft.com/kb/2572646
Google Apps:
https://sites.google.com/a/apu.edu/gmail-for-apu/executive-assistants/send-on-behalf
I have configured my sharepoint server for outgoing email. I used this tutorial
https://manojviduranga.wordpress.com/tag/configure-sharepoint-outgoing-email-step-by-step/
also tried this one:
https://technet.microsoft.com/en-us/library/cc288949(v=office.14).aspx#section5
to test if it's working, I created a simple list workflow to send email everytime a new item is created. when I create a new item in the list, the workflow progress is "Complete" but the email is not sent and there's a workflow error "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
I check all possible solutions I could find. checked the anti-virus, tried adding a pause in the workflow, restarted server and iis. I kept getting the same workflow error.
is there any other solution that could fix this problem?
First you need to be certain that Sharepoint can send emails. To do that just go to your list and in the top menu choose List and then "Alert me". Now set to receive new alerts on newly created items.
Now create new item and check if you received email. If not - your sharepoint or SMTP server is misconfigured.
You can diagnose your SMTP server by opening telnet client (start->run->cmd-> type "telnet").
in telnet client write:
open yoursmtpserveraddress:25
helo test
mail from:anyone#yourdomain.com
rcpt to:your_email#yourdomain.com
data
.
If this will succeed without errors, then your SMTP server is working. Then you should check Sharepoint configuration. Otherwise reconfigure your smtp server and/or firewall.
I have problem sending emails, i checked the email sending error logs, and I found this:
RCPT RCPT TO:
503 This mail server requires authentication when attempting to send to a non-local e-mail address. Please check your mail client settings or contact your administrator to verify that the domain or address is defined for this server.
And this:
Sending unsolicited commercial or bulk e-mail to Microsoft's computer network is prohibited. Other restrictions are found at http://privacy.msn.com/Anti-spam/. Violations will result in use of equipment located in California and other states.
And following I dont understand what it means:
DATA DATA 354+Start+mail+input;+end+with+.
RCPT RCPT TO: 250 Requested mail action okay, completed
and some others...
This SMTP server requires authentication. Depending on your provider, you either need to specify username/password or, if your host uses POP-before-SMTP auth, you need to check your email first and that action adds you to an authenticated list for some time so you can send replies.
This error means you need to authenticate against your SMTP server before sending out emails.