On Error Resume Next
Set objSysInfo = CreateObject("ADSystemInfo")
Set WshShell = CreateObject("WScript.Shell")
strUser = objSysInfo.UserName
Set objUser = GetObject("LDAP://" & strUser)
strName = objUser.FullName
strTitle = objUser.Description
strCred = objUser.Info
Set objWord = CreateObject("Word.Application")
Set objDoc = objWord.Documents.Add()
Set objSelection = objWord.Selection
strFailas1 = "1.jpg"
strFailas2 = "2.jpg"
strFailas3 = "3.jpg"
strFailas4 = "4.jpg"
strSPath1 = CreateObject("WScript.Shell").ExpandEnvironmentStrings("%USERPROFILE%") & "\Appdata\Roaming\Microsoft\Signatures\" & strFailas1
strSPath2 = CreateObject("WScript.Shell").ExpandEnvironmentStrings("%USERPROFILE%") & "\Appdata\Roaming\Microsoft\Signatures\" & strFailas2
strSPath3 = CreateObject("WScript.Shell").ExpandEnvironmentStrings("%USERPROFILE%") & "\Appdata\Roaming\Microsoft\Signatures\" & strFailas3
strSPath4 = CreateObject("WScript.Shell").ExpandEnvironmentStrings("%USERPROFILE%") & "\Appdata\Roaming\Microsoft\Signatures\" & strFailas4
Set objEmailOptions = objWord.EmailOptions
Set objSignatureObject = objEmailOptions.EmailSignature
Set objSignatureEntries = objSignatureObject.EmailSignatureEntries
If (strCred) Then objSelection.TypeText strName & ", " & strCred Else objSelection.TypeText strName
objSelection.TypeParagraph()
Set adoStream = CreateObject("ADODB.Stream")
adoStream.Open
adoStream.Charset = "UTF-8"
adoStream.LoadFromFile "file.txt"
BodyTEXT = adoStream.ReadText(-1)
adoStream.TypeText BodyTEXT
adoStream.Close
Set adoStream = Nothing
Set objSelection = objDoc.Range()
objSignatureEntries.Add "Full Signature", objSelection
objSignatureObject.NewMessageSignature = "Full Signature"
objDoc.Saved = True
objWord.Quit
I'm trying to create a VBScript to automatically genarate email signature for all users in Active Directory, but I have a problem. I want to insert UTF8 *.txt file as email signature body but it's not displayed after I run this script. Maybe I need to set it as different variable or something?
VBScript troubleshooting 101: remove On Error Resume Next, so you can actually see what goes wrong. Contrary to popular belief the statement doesn't magically make errors disappear. It just prevents the interpreter from telling you about them.
Never ever use globel On Error Resume Next in production code.
*steps off soap box*
With that said, you read the text into the variable BodyTEXT, which works just fine. However, you then try to call adoStream.TypeText with it. Without the global On Error Resume Next that statement would have raised an error
Object doesn't support this property or method.
because ADODB.Stream objects don't have such a method.
You probably intended to write objSelection.TypeText BodyTEXT instead.
Related
I would like to write a program that outputs the email from the website "https://10minutemail.net/" in a message box. Unfortunately, I can't find any code that allows me to store the ID in a variable.
I have tried this already without any results:
Dim email
email = ""
set webbrowser = createobject("internetexplorer.application")
webbrowser.statusbar = false
webbrowser.menubar = false
webbrowser.toolbar = false
webbrowser.visible = false
webbrowser.navigate("10minutemail.net")
email = webbrowser.document.all.item("fe_text")
wscript.echo(email)
The code runs with the Error: [unknown error][1].
[1]: https://i.stack.imgur.com/m1yHF.png
How to fix that?
Vbscript use HTML DOM with this method getElementById to get the particular element in a HTML code source page
So in your case, you can give a try with this code :
Option Explicit
Dim IE,Email_Value
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = False
IE.navigate "https://10minutemail.net/"
Do While (IE.Busy)
WScript.Sleep 100
Loop
Email_Value = IE.document.getElementByID("fe_text").Value
wscript.echo(Email_Value)
IE.Quit()
I have a VBScript that re-runs the users login script, I use Task Scheduler to trigger the script to run whenever the user's network status changes. (to ensure drives are mapped when necessary). I'm looking to convert this into PowerShell but am getting stumped. How would you do it?
This is the VBScript I'm using:
Dim objNet
Dim wshShell
Dim wshProcess
Dim domain, username, dc
Set objNet = CreateObject("WScript.NetWork")
Set wshShell = CreateObject("Wscript.Shell")
Set wshProcess = wshShell.Environment("Process")
Domain = objNet.UserDomain
UserName = objNet.UserName
DC = wshProcess("LogonServer")
Set UserObj = GetObject("WinNT://" & domain & "/" & username)
loginScript = DC & "\netlogon\" & UserObj.LoginScript
On Error Resume Next
wshShell.Run(loginscript)
Set UserObj = Nothing
Set wshProcess = Nothing
Set wshShell = Nothing
Set objNet = Nothing
I want to run a VBScript file silently, because it is just a part of a hidden script.
I'm using the VBScript to export automatically documents out of SAP, that is working perfectly, unless showing each step in the SAP-GUI.
The VBScript file is started in a PowerShell, where I already tried to hide the process like:
$vbsPDPPath = "$env:userprofile\AppData\Roaming\KPIReport"
$vbsPDPName = "SAP-ExportPDP.vbs"
$processNamePDP = $vbsPDPPath + "\" + $vbsPDPName
Start-Process $processNamePDP -WindowStyle Hidden
Didn't work out though.
I'm looking for a solution like in VBA, where you can just add:
Application.ScreenUpdating = False
Still have no idea how to solve it. I thought it would be helpful to let you see the vbs-code, there must be the fault.
I noticed that I haven't mentioned to hide the SAP GUI as well as the Excel Application.
Dim Number_PDP
Dim testNode
Dim WshShell
Dim profile
Set WshShell = WScript.CreateObject("WScript.Shell")
profile = WshShell.ExpandEnvironmentStrings("%USERPROFILE%")
'read XML file
Set xmlDoc = CreateObject("MSXML.DomDocument")
xmlDoc.Load profile & "\AppData\Roaming\KPIReport\DIS.xml"
For Each testNode In xmlDoc.selectNodes("/Reports/Report")
Number_PDP = testNode.SelectSingleNode("DIS_PDP").Text
'connect to SAP GUI
If Not IsObject(application) Then
Set SapGuiAuto = GetObject("SAPGUI")
Set application = SapGuiAuto.GetScriptingEngine
End If
If Not IsObject(connection) Then
Set connection = application.Children(0)
End If
If Not IsObject(session) Then
Set session = connection.Children(0)
End If
If IsObject(WScript) Then
WScript.ConnectObject session, "on"
WScript.ConnectObject application, "on"
End If
SapGuiAuto.Visible = false
'not working, thought it is possible to hide SAP
session.findById("wnd[0]").resizeWorkingPane 132,31,false
session.findById("wnd[0]/tbar[0]/okcd").text = "/n cv04n"
session.findById("wnd[0]").sendVKey 0
...
'cutted a couple of rows, just opens a document in Excel with SAP
'after SAP opens Excel I used this code to save the documents
set objExcel = getobject(,"Excel.Application")
if err.number<>0 then
err.clear
end if
'this part should be hidden as well, not working
objExcel.Visible = false
objExcel.ActiveWorkbook.SaveAs profile & "\AppData\Roaming\KPIReport\" & Number_PDP
objExcel.ActiveWorkbook.Close
objExcel.Quit
Next
I would use a workaround in both cases.
For example:
. . .
'session.findById("wnd[0]").resizeWorkingPane 132,31,false
session.findById("wnd[0]").iconify
. . .
and
. . .
'objExcel.Visible = false
objExcel.WindowState = 2
. . .
Regards,
ScriptMan
im trying to send an email from a VBScript, it will eventually be added into a currently working script as an else if (if this is possible).
im getting an error at line 23 character 32?
Dim outobj, mailobj
Dim strFileText
Dim objFileToRead
Set outobj = CreateObject("Outlook.Application")
Set mailobj = outobj.CreateItem(0)
strFileText = GetText("C:\test\test 2.txt")
With mailobj
.To = "user#user.com"
.Subject = "Testmail"
.Body = strFileText
.Display
End With
Set outobj = Nothing
Set mailobj = Nothing
End Sub
Function GetText(sFile as String) As String
Dim nSourceFile As Integer, sText As String
nSourceFile = FreeFile
Open sFile For Input As #nSourceFile
sText = Input$(LOF(1), 1)
Close
GetText = sText
End Function
what do i need to add to get line 23 to work and the script to finally do what i need it to, i have copied most of this script from elsewhere due to a sincere lack of VBscripting knowledge?
Take a look at the Using Automation to Send a Microsoft Outlook Message article. It provides a sample code and describes all the required steps for sending emails.
Try this: remove the GetText function entirely, and replace the line
strFileText = GetText("C:\test\test 2.txt")
with
Set fso = CreateObject("Scripting.FileSystemObject")
strFileText = fso.OpenTextFile("C:\test\test 2.txt").ReadAll
I've got the code below, and I'm trying to set the from field to allow Unicode. Currently in my email client I get "??".
The subject line and any content shows the Unicode correctly. And looking at the MSDN, the property should be "urn:schemas:httpmail:from".
Anyone solved this issue?
Dim AC_EMAIL : AC_EMAIL = "test#test.com"
Dim AC_EMAIL_FROM : AC_EMAIL_FROM = "测试 <test#test.com>"
Dim strSubject : strSubject = """测试"" testing testing"
set oMessage = WScript.CreateObject("CDO.Message")
With oMessage
.BodyPart.charset = "utf-8" 'unicode-1-1-utf-8
.Fields("urn:schemas:httpmail:from") = AC_EMAIL_FROM
.Fields("urn:schemas:httpmail:to") = AC_EMAIL
.Fields("urn:schemas:httpmail:subject") = strSubject
.Fields.Update
.Send
End With
Set oMessage = Nothing
Found a work around. Not the prettiest, but it works. Basically I converted the string to Quoted-Printable.
.Fields("urn:schemas:httpmail:from") = "=?utf-8?Q?=E6=8F?= <test#test.com>"