Is it possible to expose a service on a specific port using minikube?
kubectl expose deployment my-deployment --type=NodePort --port=80 does not throw an error but when calling
minikube service my-deployment --url
it results in something like:
http://192.168.99.100:31512 and it is not available on port 80 but on port 31512 instead.
Valid ports for minikube of type nodePort by default are 30000-32767 according to https://kubernetes.io/docs/concepts/services-networking/service/#nodeport
I was able to specify a particular port (here: 30000 in that range using this services.yaml:
apiVersion: v1
kind: Service
metadata:
name: my-deployment
labels:
app: my-deployment
spec:
type: NodePort
ports:
- port: 80
targetPort: 80
nodePort: 30000
protocol: TCP
selector:
app: my-deployment
When starting minikube this way:
minikube start --extra-config=apiserver.service-node-port-range=80-30000, port 80 can be used as well:
apiVersion: v1
kind: Service
metadata:
name: my-deployment
labels:
app: my-deployment
spec:
type: NodePort
ports:
- port: 80
targetPort: 80
nodePort: 80
protocol: TCP
selector:
app: my-deployment
minikube service my-deployment --url now returns http://192.168.99.100:80 as expected and the application is available on port 80.
Related
I have a running pod that was created with the following pod-definition.yaml:
apiVersion: v1
kind: Pod
metadata:
name: microservice-one-pod-name
labels:
app: microservice-one-app-label
type: front-end
spec:
containers:
- name: microservice-one
image: vismarkjuarez1994/microserviceone
ports:
- containerPort: 2019
I then created a Service using the following service-definition.yaml:
kind: Service
apiVersion: v1
metadata:
name: microserviceone-service
spec:
ports:
- port: 30008
targetPort: 2019
protocol: TCP
selector:
app: microservice-one-app-label
type: NodePort
I then ran kubectl describe node minikube to find the Node IP I should be connecting to -- which yielded:
Addresses:
InternalIP: 192.168.49.2
Hostname: minikube
But I get no response when I run the following curl command:
curl 192.168.49.2:30008
The request also times out when I try to access 192.168.49.2:30008 from a browser.
The pod logs show that the container is up and running. Why can't I access my Service?
The problem is that you are trying to access your service at the port parameter which is the internal port at which the service will be exposed, even when using NodePort type.
The parameter you were searching is called nodePort, which can optionally be specified together with port and targetPort. Quoting the documentation:
By default and for convenience, the Kubernetes control plane will
allocate a port from a range (default: 30000-32767)
Since you didn't specify the nodePort, one in the range was automatically picked up. You can check which one by:
kubectl get svc -owide
And then access your service externally at that port.
As an alternative, you can change your service definition to be something like:
kind: Service
apiVersion: v1
metadata:
name: microserviceone-service
spec:
ports:
- port: 30008
targetPort: 2019
nodePort: 30008
protocol: TCP
selector:
app: microservice-one-app-label
type: NodePort
But take in mind that you may need to delete your service and create it again in order to change the nodePort allocated.
I think you missed the Port in your service:
apiVersion: v1
kind: Pod
metadata:
name: microservice-one-pod-name
labels:
app: microservice-one-app-label
type: front-end
spec:
containers:
- name: microservice-one
image: vismarkjuarez1994/microserviceone
ports:
- containerPort: 2019
and your service should be like this:
kind: Service
apiVersion: v1
metadata:
name: microserviceone-service
spec:
ports:
- port: 2019
targetPort: 2019
nodePort: 30008
protocol: TCP
selector:
app: microservice-one-app-label
type: NodePort
You can access to your app after enabling the Minikube ingress if you want trying Ingress with Minikube.
minikube addons enable ingress
my deployment yaml:
apiVersion: apps/v1
kind: Deployment
metadata:
name: nginx-deployment
labels:
app: nginx
spec:
selector:
matchLabels:
app: nginx
replicas: 3
template:
metadata:
labels:
app: nginx
spec:
containers:
- name: nginx
image: nginx:1.7.9
ports:
- containerPort: 80
my service yaml:
apiVersion: v1
kind: Service
metadata:
name: nginx-service
spec:
selector:
app: nginx
ports:
- protocol: TCP
port: 80
targetPort: 80
enter image description here
enter image description here
and then I curl 10.104.239.140, but get an error curl: (7) Failed connect to 10.104.239.140:80; Connection timed out
Who can tell me what's wrong?
welcome to SO. That service you've deployed is of type ClusterIP which means it can only be accessed from within the cluster. In your case, it seems you're trying to access it from outside the cluster and thus the connection timed out.
What you can do is, deploy a service of type NodePort or LoadBalancer to access it from outside the cluster. You can read more about different service types here.
You're service would end up something like this:
apiVersion: v1
kind: Service
metadata:
name: nginx-service
spec:
type: NodePort ## or LoadBalancer(supported by Cloud providers like AWS)
selector:
app: nginx
ports:
- protocol: TCP
port: 80
targetPort: 80
# Optional field
# By default and for convenience, the Kubernetes control plane will allocate a port from a range (default: 30000-32767)
nodePort: 30001
I want to deploy a custom nginx app on my kubernetes cluster.
I have three raspberry in a cluster. My deplotment file looks as follows
kubepodDeploy.yaml
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: my-nginx
spec:
selector:
matchLabels:
run: my-nginx
replicas: 2
template:
metadata:
labels:
run: my-nginx
spec:
containers:
- name: my-nginx
image: privateRepo/my-nginx
ports:
- containerPort: 80
---
apiVersion: v1
kind: Service
metadata:
name: my-nginx
labels:
run: my-nginx
spec:
type: NodePort
ports:
- port: 8080
targetPort: 80
protocol: TCP
name: http
- port: 443
protocol: TCP
name: https
selector:
run: my-nginx
How can I deploy it so that I can access my app by ipadress. Which service type do I need?
my service details are:
kubectl describe service my-nginx ~/Project/htmlBasic
Name: my-nginx
Namespace: default
Labels: run=my-nginx
Annotations: Selector: run=my-nginx
Type: NodePort
IP: 10.99.107.194
Port: http 8080/TCP
TargetPort: 80/TCP
NodePort: http 30488/TCP
Endpoints: 10.32.0.4:80,10.32.0.5:80
Port: https 443/TCP
TargetPort: 443/TCP
NodePort: https 32430/TCP
Endpoints: 10.32.0.4:443,10.32.0.5:443
Session Affinity: None
External Traffic Policy: Cluster
Events: <none>
You can not access the application on ipaddress:8080 without using a proxy server in front or changing IPtable rules(not good idea). NodePort service type will always expose service in port range 30000-32767
So at any point, your service will be running on ipaddress:some_higher_port
Running a proxy in front which, redirects the traffic to node port and since 8080 is your requirement so run proxy server also on 8080 port.
Just to add proxy server will not be part of Kubernetes cluster
If you are on cloud consider using LoadBalancer service and access you app on some DNS name.
I have a manifest as the following
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: my-redis
spec:
selector:
matchLabels:
app: my-redis
replicas: 1
template:
metadata:
labels:
app: my-redis
spec:
containers:
- name: my-redis
image: redis
ports:
- name: redisport1
containerPort: 6379
hostPort: 6379
---
apiVersion: v1
kind: Service
metadata:
name: redis-service
labels:
app: my-redis
spec:
type: NodePort
selector:
name: my-redis
ports:
- name: redisport1
port: 6379
targetPort: 6379
nodePort: 30036
protocol: TCP
This is a sample that reproduces my problem. My intention here is to create a simple cluster that has a pod with a redis container in it, and it should be exposed to my localhost. Still, get services gives me the following output:
redis-service NodePort 10.107.233.66 <none> 6379:30036/TCP 10s
If I swap NodePort with LoadBalancer, I get an external-ip but still port doesn't work.
Can you help me identify why I'm failing to map the 6379 port to my localhost, please?
Thanks,
In order to access your app through node port, you have to use this url
http://{node ip}:{node port}.
If you are using minikube, your minikube ip is the node ip. You can retrieve it using minikube ip command.
You can also use minikube service redis-service --url command to get the url to access your application through node port.
For anybody who's interested in the question, I found the problem. After Ijaz's fix, I also needed to change the selector to match the label in the pod, it was a typo on my end!
pod has "app=my-redis" tag, but Service selector had "name=my-redis". Matching them fixed the access problem.
Dont need the hostPort:
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: my-redis
spec:
selector:
matchLabels:
app: my-redis
replicas: 1
template:
metadata:
labels:
app: my-redis
spec:
containers:
- name: my-redis
image: redis
ports:
- name: redisport1
containerPort: 6379
---
apiVersion: v1
kind: Service
metadata:
name: redis-service
labels:
app: my-redis
spec:
type: NodePort
selector:
name: my-redis
ports:
- name: redisport1
port: 6379
targetPort: 6379
nodePort: 30036
protocol: TCP
now the nodePort 30036 can be used to access the service on any worker node.
If the cluster node is somewhere else and you want to make the port available on you local client , then just do kubectl port forward
kubectl port-forward svc/redis-service 6379:6379
https://kubernetes.io/docs/tasks/access-application-cluster/port-forward-access-application-cluster/
Notes:
On-prem installs of k8s dont support service type of load balancer
ClusterIP is the IP on the pod network
Node IP is the IP of some machine that is running the k8s cluster
My objective: To expose a pod's(running angular image) port so that I can access it from the host machine's browser.
service.yml:
apiVersion: v1
kind: Service
metadata:
name: my-frontend-service
spec:
selector:
app: MyApp
ports:
- protocol: TCP
port: 8000
targetPort: 4200
Pod's yml:
apiVersion: v1
kind: Pod
metadata:
name: angular.frontend
labels:
app: MyApp
spec:
containers:
- name: angular-frontend-demo
image: angular-frontend-image
ports:
- name: nodejs-port
containerPort: 4200
Weird thing is that doing kubectl port-forward pod/angular.frontend 8000:4200 works. However, my objective is to write that in service.yml
Use Nodeport:
apiVersion: v1
kind: Service
metadata:
name: my-frontend-service
spec:
selector:
app: MyApp
type: NodePort
ports:
- protocol: TCP
port: 8000
targetPort: 4200
nodePort: 30001
then you can access the service on nodeport 30001 on any node of the cluster.
For example the machine name is node01 , you can then do curl http://node01:30001
The service you've defined here is of type ClusterIP (since you haven't set a type in the spec). This means the service is only available and reachable within the cluster. You can use Ingress to make it accessible from outside the cluster, see for example this post showing how to do that for Minikube.