I am trying to create a powershell script that changes a single port on a computer.
I have 10 machines, each have 4 ports with one port out the four having a specific Interface Description "Intel(R) 82579LM Gigabit Network Connection". This is constant throughout all the machines. The other 3 ports are just “Intel(R) 82574L Gigabit Network Connection” ports.
I only care for the 82579LM port. I want a script that will set a static IP to this one interface that I can run on each machine after a reinstall. I already have a script that is able to use the hostname to set the IP but I cannot figure a way to change the IP using the Interface Description from get-netadapter to select the adapter.
I can't get my head around this, any input would be amazing!
Quick/easy method would be to hold the object from your Get-NetAdapter -InterfaceDescription results in a variable
PS> $INTEL82579LM=Get-NetAdapter -InterfaceDescription "Intel(R) 82579LM Gigabit Network Connection"
You can access individual attributes of the object as $variable.attribute -- so the interface ID is $INTEL82579LM.ifIndex
PS> echo $INTEL82579LM.ifIndex
19
The object held in the variable is used to insert the interface index number on subsequent commands:
PS>Set-NetIPAddress -InterfaceIndex $INTEL82579LM.ifIndex -IPAddress 10.1.2.3 -PrefixLength 24
Set-NetIPAddress is for updating existing IP address config. New-NetIPAddress creates a new one.
Related
I am trying to determine the physical network adapter in use through powershell.
I have some of the pieces for a function I am creating but have issues to determine the actual physical adapter in use:
With Get-NetAdapter -Physical | Select-Object Name, InterfaceDescription, ifIndex, Status I can get the physical network adapters, and if they are up:
Here I get also the interface index (relevant later):
Name
InterfaceDescription
IfIndex
Status
Ethernet
Intel(R) Ethernet Connection (4) I219-V
23
Up
Wi-Fi
Intel(R) Dual Band Wireless-AC 8265
8
Up
With Get-NetRoute -InterfaceIndex <interface index> | Where-Object {$_.AddressFamily -eq 'IPV4'} I can get the routes for all interfaces (2 in this case)
The problem is that both interfaces have a 0.0.0.0/0 route for their respective gateway, so any of them can route me to the "regular" internet (let's say, google.com).
So how do I determine the actual interface in use?. I think that the interface metric in both cases can help me:
ifIndex
DestinationPrefix
NextHop
RouteMetric
ifMetric
8
0.0.0.0/0
192.168.3.1
256
40
23
0.0.0.0/0
192.168.1.1
256
25
So the Ethernet interface (IfIndex = 23) has an IfMetric of 25. As RouteMetric is the same for both, Ethernet Interface will take precedence, in theory.
This shall apply to connections with or without VPN clients (indeed for these tests I am connected through a VPN client) but:
a. I am not 100% sure that this may work every time.
b. What if the Route Metric is different for the interfaces?. What takes precedence: the ifMetric, the RouteMetric or a combination of both?.
Will be glad to read your comments or experiences about this.
Thanks!
It is a combination of the metrics from my experience, however the way I usually get a definitive answer is to run the Test-NetConnection command to a URL or IP and the output of that command will list the interface it used. I use it to ensure traffic goes over our VPN adapter but in your case if you did a Test-NetConnection -ComputerName www.google.com it will return the interface alias of the interface used which you can use to find the ifindex and map it back to the adapter if you have multiple adapters
Using PowerShell, we can easily set a static IP address on an adapter where the InterfaceIndex is known like this:
New-NetIPAddress -InterfaceIndex 17 -IPAddress 192.168.0.1 -PrefixLength 24 -DefaultGateway 192.168.0.254
We would like to be able to set the static IP address on any physical wired adapter. We can get the physical adapters like this:
Get-NetAdapter –Physical
That will return something like this:
Name InterfaceDescription ifIndex Status MacAddress LinkSpeed
---- -------------------- ------- ------ ---------- ---------
Ethernet Intel(R) Ethernet Connection (5) 17 Disconnected 00-11-22-33-44-55 1 Gbps
Wi-Fi Intel(R) Wireless LAN 7 Disconnected 00-11-22-33-44-56 72 Mbps
Is there any way to get only the wired adapters and not the wireless
adapters, other than by name (which could be anything)?
Since there may be multiple wired adapters (however rare), and
since we don't know which physical adapter might be used, we would
like to set the static IP address to each wired adapter. What can
we do (something like a "for/each" loop) to set the IP address on
each wired adapter on the PC?
EDIT: In reading some more, it seems that since Windows 8 that the wired adapter may be configured to be statically-named "Ethernet". Since we're only targeting Windows 10, can we really just add a query to get only adapters whose name is like 'Ethernet%?
I would use
Get-NetAdapter -Physical | Where-Object { $_.PhysicalMediaType -eq "802.3" }
This seems to be a good indicator of physical ethernet only adapters, and it will get adapters that don't have "Ethernet" in the Description/DisplayName. WLAN devices will have Native 802.11 (or otherwise indicative of a Wireless Adapter).
Do Get-NetAdapter | Export-CSV C:\Path\To\CSV to get all properties for all adapters on the system. You may find more properties to leverage in your filtering.
As for setting the IP Address on all ethernet adapters, this should work fine (although I caution that setting the same IP Address on multiple adapters may cause trouble in the however unlikely event that multiple ethernet adapters are in use simultaneously):
$ethernetAdapters = #(Get-NetAdapter -Physical | Where-Object {$_.PhysicalMediaType -eq "802.3"})
$staticIPAddress = "0.0.0.0"
$gateway = "0.0.0.0"
$prefixLength = "24"
foreach ($adapter in $ethernetAdapters) {
New-NetIPAddress -IPAddress $staticIPAddress -AddressFamily IPV4 -DefaultGateway $gateway -PrefixLength $prefixLength -InterfaceIndex $adapter.InterfaceIndex
}
Remember to replace the variables with information for your environment, and specifically the IP address you'll use for the adapters.
You may wish to figure a way to generate a new IP Address for each $adapter, maybe in succession (*.200, *.201 etc.), with a portion that calls out to a centralized file with ip addresses, mac addresses and serial numbers for record keeping.
Have you tried something like
Get-NetAdapter -Physical | Where-Object { $_.Name -match "^Ethernet" }
I'll have some computers with 8 network adapters, but only one is configured with the routed VLAN.
To identify it, I wrote a little powershell script that is a loop that assigns the IP address, test the Gateway connectivity until it founds the correct interface.
But when I try to release the IP address using enableDHCP method it will never clears the IP Address nor the Gateway.
I already tried releaseDhcpLease, for individual or for ALL interfaces, but without result ...
I've tried some tricks published here -> https://social.technet.microsoft.com/Forums/ie/en-US/94f0f04a-1669-4276-b529-e68edffd9aff/how-to-remove-default-gateway?forum=winserverpowershell
But none works..
the only effective method for to release the IP configuration was using "netsh command", for example:
netsh int ipv4 -name='Ethernet 3' addr=172.22.33.123 gateway=all
How can I do the same using Powershell + WMI commands? I may invoke "netsh", but script becomes little more complex than I desire.
Regards
In my home network , I have to set IP address and DNS server. In Office network that settings to be removed .
Daily i am doing this activity manually. Though powershell automate so many things ,I am not finding any cmdlet for this in Windows 7.
I am doing the procedure manually . Is there any way to solve this using powershell? Even if batch file is there for it , I can use it
Here is a script that I use for that.
$wmi = Get-WmiObject win32_networkadapterconfiguration -filter "ipenabled = 'true'"
if($wmi.count -eq 1)
{
$wmi.EnableStatic("10.0.0.2", "255.255.255.0")
$wmi.SetGateways("10.0.0.1", 1)
$wmi.SetDNSServerSearchOrder(#("10.0.0.3","10.0.0.4"))
}
An an even better option for most situation (especially home networks) is to use DHCP. If you have a wireless router, It should have that option.
Isn't PowerShell a bit of overkill?
You can use simple NETSH command from command line.
To check config:
netsh interface ip show config
To turn on DHCP:
netsh interface ip set address name="Local Area Connection" source=dhcp
To setup static address:
netsh interface ip set address name="Local Area Connection" source=static addr=192.168.0.100 mask=255.255.255.0 gateway=192.168.0.1
I am using Windows XP Sp3. We are having both wired network and wireless network.
Both will have different IP address range .
Is there any way to find which IP address/Gateway is used to communicate?
i.e. We are having permission to wired network IP range to rdp to our lab machines. But with wireless connection we can't.
Often people forget that and asking me.
If the wireless network is active channel , then it should either try to connect through wired network or it should intimate them. How to achieve this using powershell?
You can get the same information route print shows like this:
Get-WmiObject -Class Win32_IP4RouteTable | select Destination, Mask, NextHop, Metric1
If your network address is 10.0.0.0 you can get the NextHop IP like this:
Get-WmiObject -Class Win32_IP4RouteTable | ? {$_.Destination -eq "10.0.0.0"} | select NextHop
As I understand you should manually add routes to lab machines for wired interface. And you could detemine current route settings with command:
route print
running from windows console (cmd )
Guess this links could be also helpfull to you:
Configure default gateway
Usage route command
Adding static IP route