I am trying to install mongodb 4 into an amazonlinux:2018.03 docker container. I followed these instructions. I managed to install only one package: mongodb-org, but I failed to install the rest of it: mongos, server, shell, tools.
The error I am give is the following:
Error: Package: mongodb-org-mongos-4.0.2-1.amzn2.x86_64
(mongodb-org-4.0)
Requires: libc.so.6(GLIBC_2.18)(64bit)
There is a libc.so.6 in /lib64 pointing to /lib64/libc-2.17.so
Any help would be appreciated. Thank you.
It looks like you're using an AmazonLinux 2 MongoDB package within an AmazonLinux 1 container. You should try using the MongoDB 4.0.2 package for AmazonLinux 1.
Cloud9 runs on the old Amazon linux instance, so you may run into this problem using the IDE. This is how I got it working for myself on Cloud9 running in an Amazon Linux instance:
File named "mongodb-org-4.2.repo"
[mongodb-org-4.2]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/amazon/2013.03/mongodb-org/4.2/x86_64/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-4.2.asc
Then I ran the following in the same directory as that file:
sudo cp ./mongodb-org-4.2.repo /etc/yum.repos.d/mongodb-org-4.2.repo
sudo yum install -y mongodb-org
I had a similar issue but I followed this installation guide here; https://www.attosol.com/how-to-install-mongodb-in-aws-linux-step-by-step
You can get a more appropriate repo on this link https://www.mongodb.org/dl/linux/x86_64-amazon . My suggestion is that you experiment with the two most recent ones and see what works.
Related
After successfully installing postgresql from source code, I got an error while installing Apache AGE. I have attached a screenshot of the error below. It would be great if someone can help out.Terminal view of command and error
I am searching online to find a solution but haven't been able to found yet.
From the image, it looks like you are using postgres 12.13.
For postgres 12, you should checkout to age for pg12 branch by doing git checkout release/PG12/1.1.1 and then make install.
I was also getting errors in a configuration which were resolved by using this command first.
sudo apt-get install build-essential libreadline-dev zlib1g-dev flex bison
Try this and this will solve your problem too
In addition to installing the essential libraries before the actual installation using:
sudo apt-get install build-essential libreadline-dev zlib1g-dev flex bison (Note: The above command is for Ubuntu only. If you are not on Ubuntu, See here)
It is also recommended to install the postgreSQL development files using:
sudo apt install postgresql-server-dev-xx
This is not the exact command to be typed in the terminal. Check out the link
here to see the exact compatible command to execute according to the version of Linux you are currently using.
I want to install PostgreSQL 11 on an EC2 instance, based on the Amazon Linux AMI 2 image. Following posts, SO questions, and finding the latest Postgresl yum repository, I tried:
sudo yum install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
I get this error:
--> Processing Dependency: /etc/redhat-release for package: pgdg-redhat-repo-42.0-4.noarch
--> Finished Dependency Resolution
Error: Package: pgdg-redhat-repo-42.0-4.noarch (/pgdg-centos11-11-2.noarch)
Requires: /etc/redhat-release
I'm stuck.. is there a clean way to overcome this problem?
Aman,
It may help you: https://stackoverflow.com/a/55883490/7541412
Moreover, if you think PostgreSQL v10 can resolve your issues. You can try these commands:
sudo yum update -y
sudo amazon-linux-extras enable postgresql10
After having PostgreSQL in your repository, now you can install:
yum clean metadata
yum install postgresql
Thanks!
I successfully installed 11.5 on Amazon Linux using
sudo amazon-linux-extras install postgresql11
I had issues with the Amazon Linux 2 AMI for CodeBuild using Python 3 but amazon-linux-extras only using Python 2 (totally bizarre considering Python 2 has been sunset, I know). From this thread you can copy the amazon_linux_extras from the Python 2 site-packages to the Python 3 one.
To find the location of amazon-linux-extras use
find -type d -name "amazon_linux_extras" # note the underscore (_), not dash (-)
To find the Python 3 site-packages directory
find -type d -name "site-packages"
To copy across
cp -r /path/to/amazon_linux_extras /path/to/python3/site-packages
Once I had done that, I used #Hassan's answer to upgrade to PostgreSQL 11.
You can install PostgreSQL by running the following command:
$ sudo yum install postgresql postgresql-server postgresql-devel postgresql-contrib postgresql-docs
Out of curiosity why are you not using PostgreSQL on AWS RDS?
I'm working on an Ubuntu 16 server and I can't seem to get the mongodb driver for php 7 to work. I installed it successfully on my xampp on my windows machine but Ubuntu and php7 seemingly have vast differences.
I did try to install it via pecl install mongodb and used composer to put in the dependencies but it still does not work. I'm using the same php file from my windows Xampp and when I access the page it throws a 500 status code.
Could someone provide a definitive walkthrough on how to install this driver and maybe also how to revert any changes I made using composer and pecl?
Cool even I tried with pecl but didn't work as expected. It work with pecl7 Also, I received this warning along with error, WARNING: "pecl/mongo" is deprecated in favor of "channel:///mongodb" pecl/mongo requires PHP (version >= 5.3.0, version <= 5.99.99), installed version is 7.1.8. Also, got 500 Internal server error.
Before that MongoDB php7 driver, I needed the memcache and getting phphize error that I solved using this repo. Then finally I use this low level PHP driver for MongoDB.
$ git clone https://github.com/mongodb/mongo-php-driver.git
$ cd mongo-php-driver
$ git submodule sync && git submodule update --init
$ /usr/bin/phpize
$ ./configure
$ make all -j 5
$ sudo make install
You can confirm from the output that mongodb.so driver is installed.
;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;
extension=mongodb.so
Then only step remaining is make it available in your respective path. You can check your extensions_dir in php.ini with the following command,
$ php -i | grep extension_dir
extension_dir => /usr/lib64/php/7.0/modules => /usr/lib64/php/7.0/modules
And, I can verify that mongodb.so is present into the above directory. Then reload the composer and you are good to go ! Hope this helps as it work for me.
I am trying to install a package on CentOS, but it throws error when I run the "yum" command. The internet connection is working fine.
I try to yum clean all but problem persist.
Error:
[root#dcos-master3 ~]# yum install ntp
Loaded plugins: fastestmirror
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/$releasever/x86_64
My yum repolist is the next:
[root#dcos-master3 ~]# yum repolist list
Loaded plugins: fastestmirror
https://yum.dockerproject.org/repo/main/centos/%24releasever/repodata/repomd.xml: [Errno 14] HTTPS Error 403 - Forbidden
Trying other mirror.
To address this issue please refer to the below knowledge base article
https://access.redhat.com/solutions/69319
If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/
repolist: 0
If I list the repolist:
[root#dcos-master3 ~]# yum repolist
Loaded plugins: fastestmirror
https://yum.dockerproject.org/repo/main/centos/%24releasever/repodata/repomd.xml: [Errno 14] HTTPS Error 403 - Forbidden
Trying other mirror.
To address this issue please refer to the below knowledge base article
https://access.redhat.com/solutions/69319
If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/
repo id repo name status
base/$releasever/x86_64 CentOS-$releasever - Base 0
dockerrepo/$releasever Docker Repository 0
extras/$releasever/x86_64 CentOS-$releasever - Extras 0
updates/$releasever/x86_64 CentOS-$releasever - Updates 0
repolist: 0
BEFORE TRYING ANY OF THIS, HAVE A BACKUP OF YOUR MACHINE, YOU COULD DAMAGE YOUR OS MORE/COMPLETELY
It seems that your yum variable $releasever is somehow corrupt,
it usually is caused by missing centos-release package on the machine for some obscure reasons.
You can check if you have the package by:
rpm -qi centos-release
You will probably see:
"package centos-release is not installed"
First find out the exact centos version that you have by executing as root:
cat /etc/redhat-release
You will see something like this:
CentOS Linux release 7.3.1611 (Core)
You can fetch the centos-release package from repo by:
wget http://vault.centos.org/centos/7.3.1611/updates/x86_64/Packages/centos-release-7-3.1611.el7.centos.2.5.x86_64.rpm
Now run reinstall centos-release package via rpm:
sudo rpm -Uvh --replacepkgs centos-release-7-3.1611.el7.centos.2.5.x86_64.rpm
As next you can try to install something with yum and you might get:
[root#dcos-master3 ikerlan]# sudo yum install wget
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
error: cannot open Packages index using db5 - (-30969)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
Now you can try to reboot the machine or try to use the following command to rebuild the rpm db:
rpm --rebuilddb
I came across the same issue while downloading some packages in centos 7. After days of search, I found the solution:
Go to the yum repo directory.
cd /etc/yum.repos.d.
Make a copy of the CentOS-Base.repo file.
cp CentOS-Base.repo CentOS-Base.repo.old
Edit the CentOS-Base.repo file. Comment mirrorlist and uncomment baseurl.
vi CentOS-Base.repo
[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Now when you use yum, do the following.
sudo yum --disablerepo=* --enablerepo=base install httpd
Likewise for yum update.
sudo yum --disablerepo=* --enablerepo=base install httpd
It should work now.
I ran into this problem when attempting to install MariaDB on CentOS 7. I was super frustrated and after much searching found the answer at this link.
Here is what fixed this problem for me. Run as root.
# yum --disablerepo "*" --enablerepo epel install [package]
# yum clean all
"epel" can be whatever repo you like, but this one worked for me. Place [package] in the command just as written, not what package you are trying to install.
After you run the above, exit root and run whatever install you were attempting before encountering the error.
I noticed that in the failing url, your $releasever is %24releasever, but it should be 7 or 7.14.xx. Please check your yum config file at /etc/yum/var, or search in every .repo file, to see what is its value. It may be corrupted.
See Red Hat documentation for more information about how to set these variables.
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/deployment_guide/sec-using_yum_variables
yum install http://rpms.remirepo.net/enterprise/remi-release-7.rpm -y
yum -y install yum-utils
yum-config-manager --enable remi-php74
Then proceed to your installation/updates/etc
Always make sure NAT is active on your centos7. Specially when there is a VMnet2 for host. Because sometimes VMNet2 can be active instead of NAT and because of that you will not be able to connect to the internet through centos7. This is just a one reason for getting that error.
How I yum install postgres using rpm from http://yum.postgresql.org?
I followed these steps:
Install Centos 6.5 from Live DVD:
http://vault.centos.org/6.5/isos/x86_64
I google: Postgres 9.5 install on Centos 6.5
I run two shell commands:
wget https://download.postgresql.org/pub/repos/yum/9.5/redhat/rhel-6-x86_64/pgdg-centos95-9.5-2.noarch.rpm
yum install pgdg-centos95-9.5-2.noarch.rpm
I'm not sure what to do next.
I see this page:
http://yum.postgresql.org/repopackages.php
At the top of the page is a link: 'Yum Howto'
I click that link and see this page:
http://yum.postgresql.org/howtoyum.php
The first link there is this:
http://yum.postgresql.org/repopackages.php
So I am seeing circular documentation rather than helpful documentation.
I see a link to a pdf:
http://yum.postgresql.org/files/PostgreSQL-RPM-Installation-PGDG.pdf
I open the pdf and it lists packages that are available.
I surmise that I need these packages:
postgresql-libs, postgresql and postgresql-server
It does not say where they are.
Questions:
Where are the packages listed in PostgreSQL-RPM-Installation-PGDG.pdf ?
Assuming I want to install: postgresql-libs, postgresql and postgresql-server, How to?
At postgresql.org, I see this rpm : pgdg-centos95-9.5-2.noarch.rpm
What is the purpose of pgdg-centos95-9.5-2.noarch.rpm?
I figured this out.
The purpose of pgdg-centos95-9.5-2.noarch.rpm is to expose more packages to the yum-package-list on my host.
I can then see some of them with this command:
yum list postgresql95*
And I can install them with this command:
yum install postgresql95 postgresql95-server postgresql95-libs postgresql95-devel
I ran the above commands on my centos host and they worked perfectly.