I am not able to no. the figures automatically in MS word.
Its showing me a code like- Figure { SEQ Figure \* ARABIC }:
Please help me in how can I change this to no. format.
Thanks
You have Word's field code display toggled 'on'. Pressing Alt-F9 toggles it on/off.
Related
Please tell me how to display in the result sheet the full string of the word you are looking for, and not in pieces as in default in Recoll,I'll try in more detail:
I have recoll installed on my computer (which uses Xapian).
There are so many files.
I want to use recall as an alternative to grep
I indexed my data and search, but in the resultant window I do not like the output:
I want the whole row to be highlighted as if in a grepe, where I have the search word and output it immediately to the Result Sheet.
And now it looks like it gives out a piece of text where the searched word is found, but only partially, then it is divided by several points and again a piece of text, and again. You can see an example in the image, for example here (default settings) https://i0.wp.com/www.linuxlinks.com/wp-content/uploads/2018/01/Screenshot-Recoll.jpg?resize=768%2C596&ssl=1
This is how recoll works. It shows you "snippets" of text around the search hits. You can adjust the snippets parameters (size and number of context words) in the preferences Gui Configuration, Search Parameters section. You can also hit Preview, and then shift down/up arrows, to browse the result documents previews, for a more complete view.
So I am having a problem. This is what I can create on one of my laptop:
On another, when I created something that has {TC} in it, the whole field code disappeared.
For the example above, if on the other computer, both are running Office 2010,
I can input the code to create the table of content from:
{TOC \f \h \z \f 1\t "Heading 1,1,Heading 2,2,Heading 3,3,Title,1}
to
{TC}
The moment I type in TC, the whole {} disappears.
Other field codes work just fine, except for {TC}. So my question is how do I get {TC} to show on my other laptop?
Thank you for your time.
Apparently, I found my answer.
When I searched google for my answer, most sites give this as a solution:
For Word 2010, go to File->Options->Advanced
Under Show document contents: Select "Show field code instead of their values"
This is the equivalent of pressing Alt+F9, which DID NOT solve my problem.
Apparently, the solution to get {TC} to show in your document is in:
go to File->Options->Display
and check to always show HIDDEN TEXT.
I hope this helps someone in the future.
Yeah, the disappearing TC code is annoying at first -- seems like it's broken. Other codes work, but why does that disappear, even if entering manually? Word instantly sets TC code to Hidden, even the field code itself.
To temporarily toggle this visible without permanently changing your display to show Hidden Text, you can use the normal Ctrl-Shift-8, which toggles display of spaces, paragraph marks, tabs, and Hidden Text, on and off. This is a good keyboard shortcut to have in your standard back of tricks anyway. It is frequent in Word that you need to toggle paragraph marks on and off, because paragraph formatting is attached to the Paragraph mark, and when they're hidden, it can be tricky to fix various formatting issues.
The original post was a few years ago, but I fear things have gotten worse since then, not better. I am using Word 365 v2201, which should be up to date. The other day, I wasted hours on trying to resolve this issue with TC field codes.
First I tried entering them using Insert > Quick Parts > Field. Word creates what looks like a field code, but it behaves as normal text. Messing around with the various controls to toggle field display and hidden text etc etc, has absolutely no effect. It is basically a faux field. And of course, it is completely ignored when compiling the TOC.
Next, I tried entering it manually, by using Ctrl + F9 to either create a blank field or convert some existing text into a field. Same result as above.
As with the original post, this seems to afflict only the TC field code. Other codes work fine, including TOC. And if I create a TOC field, then edit the code to TC, it immediately loses its properties as a field. If I then put the O back in, it immediately behaves as a field once again. Unlike in the original post, adjusting the settings for field display and/or hidden text, have no impact.
In the end, the only solution was to create the field using Alt + Shift + o to open the Mark Table of Contents Entry dialog box. And finally, this works!
I am an Autohotkey user. How can I make some text in clipboard having bold style. Actually, I want to get some text as input from clipboard and then change style (bold or unbold) of some words in there and eventually to paste the enhanced text to where it was previously copied. Also notice that the existing format of the text is important (thus using ClipboardAll) and I don't want to lose the original format; just to change / modify style of some words in there.
Any idea / clue to accomplish this?
Thanks
I assume you're working in word or some other text editor that allows Ctrl+B to bold highlighted text. Something like this should work.
clipboard =
ClipWait,,
OutVar := StrLen(clipboard)
;put code for navigating to your paste place here
send,^v
send,{Shift Down}
send,{Left %OutVar%}
send,{Shift Up}
send,^b
send,{end}
;send,%OutVar%
I'm kind of an amateur at this, but I tested it and it seems to work if you want to bold the entire clipboard. If you're bolding only certain words within a clipboard... I'm not sure. Personally, I would create a script that transfers the clipboard to Word or some other rich text editor, then use ^f to find the words I'm looking for (using input or InputBox), and then bolding those words in the style used above, and then copy/pasting the finished work to the final destination.
But there's probably an easier way to do it...
EDIT: InStr() might help you there... check the AutoHotkey help for more info about InStr().
I think it should be pretty simple what I want to do, basically I have one edit box that displays a value in percentages and another that I want to update to display raw values. I've tried using the following code under the edit1 (percent) callback:
currentKey = str2num(get(gcf,'CurrentKey'));
percent = str2num(get(handles.edit1,'String'));
if ~isnan(currentKey) && ~isnan(percent) && 0<=percent && percent<=100
set(handles.edit2,'String',num2str(2*percent))
end
But it will only update the second edit box if I first click outside of the first one. Anyone have an idea of what I should be doing?
Thanks!
I think this link should help you:
How can I make the text that I enter into an edit text box update dynamically?
Solution:
This enhancement has been incorporated in Release 2011a (R2011a). For previous product releases, read below for any possible workarounds:
This is expected behavior of the Edit Box UICONTROL in MATLAB.
You can try using the 'keypressfcn' to grab the keyboard input. The attached two files demonstrate the ability of real-time text update. As you enter text into the upper edit box, the text will be copied to the edit box beneath it as you enter.
Please download the following two files:
test_keypressfcn.m
test_keypressfcn.fig
Execute the program.
A GUI will appear. Enter text in the upper edit box displayed in the GUI.
Observe the text in the lower editbox is updated dynamically or in real-time as you enter test in the upper edit box.
Please note that this will work only for text that is continuously entered in the editbox. If you type in between words already entered in the editbox the gui will not perform as expected. You will need to implement logic similar to the one in this example to get the behavior that you desire.
I can change the style of a cell using conditional formatting. But there I would be limited to a maximum of 3 cases it can handle.
What I want to do is to get the value of a cell, convert it in a certain way and set the result as the cells background-color.
The simplest example would be cells with values between 0 and 10, resulting in gray-steps between white and black.
Is this possible? Are there ways to set the background-color of a cell automatically?
Thx!
This has been implemented in libreoffice 3.6 (see the release notes)
Format one cell how you want (not one you want to conditionally format).
Press F11 to get the Styles dialogue box
Use the button one from the top right, which is "New Style From Selection"
Type the name you want, e.g. BlackBack
Then do the conditional formatting of the relevant cells, choosing BlackBack
Source: http://www.oooforum.org/forum/viewtopic.phtml?t=61294
Note that you can find "Conditional Formatting" under the Format menu in OOo Calc.
As Joey said: "As far as I can see conditional formatting in OOo cannot do that. Excel has no problems there, though."
It's simply not possible... :-/