I need to Know the query to fetch SMA of a stock for a specific date range.
I don't see anything about data range in API document.
I was having the same issue, but decided to go with IEXFinance instead. It doesn't seem like Alpha Advantage is quite there yet. As you can see from the screenshot, they understood the importance of this feature and made it extremely simple. No API key or anything needed too, which is nice.Directions
Related
is there any possibility to get exact time spent on a certain level in a game via firebase analytics? Thank you so much 🙏
I tried to use logEvents.
The best way to do so would be measuring the time on the level within your codebase, then have a very dedicated event for level completion, in which you would pass the time spent on the level.
Let's get to details. I will use Kotlin as an example, but it should be obvious what I'm doing here and you can see more language examples here.
firebaseAnalytics.setUserProperty("user_id", userId)
firebaseAnalytics.logEvent("level_completed") {
param("name", levelName)
param("difficulty", difficulty)
param("subscription_status", subscriptionStatus)
param("minutes", minutesSpentOnLevel)
param("score", score)
}
Now see how I have a bunch of parameters with the event? These parameters are important since they will allow you to conduct a more thorough and robust analysis later on, answer more questions. Like, Hey, what is the most difficult level? Do people still have troubles on it when the game difficulty is lower? How many times has this level been rage-quit or lost (for that you'd likely need a level_started event). What about our paid players, are they having similar troubles on this level as well? How many people have ragequit the game on this level and never played again? That would likely be easier answer with sql at this point, taking the latest value of the level name for the level_started, grouped by the user_id. Or, you could also have levelName as a UserProperty as well as the EventProperty, then it would be somewhat trivial to answer in the default analytics interface.
Note that you're limited in the number of event parameters you can send per event. The total number of unique parameter names is limited too. As well as the number of unique event names you're allowed to have. In our case, the event name would be level_completed. See the limits here.
Because of those limitations, it's important to name your event properties in somewhat generic way so that you would be able to efficiently reuse them elsewhere. For this reason, I named minutes and not something like minutes_spent_on_the_level. You could then reuse this property to send the minutes the player spent actively playing, minutes the player spent idling, minutes the player spent on any info page, minutes they spent choosing their upgrades, etc. Same idea about having name property rather than level_name. Could as well be id.
You need to carefully and thoughtfully stuff your event with event properties. I normally have a wrapper around the firebase sdk, in which I would enrich events with dimensions that I always want to be there, like the user_id or subscription_status to not have to add them manually every time I send an event. I also usually have some more adequate logging there Firebase Analytics default logging is completely awful. I also have some sanitizing there, lowercasing all values unless I'm passing something case-sensitive like base64 values, making sure I don't have double spaces (so replacing \s+ with " " (space)), maybe also adding the user's local timestamp as another parameter. The latter is very helpful to indicate time-cheating users, especially if your game is an idler.
Good. We're halfway there :) Bear with me.
Now You need to go to firebase and register your eps (event parameters) into cds (custom dimensions and metrics). If you don't register your eps, they won't be counted towards the global cd limit count (it's about 50 custom dimensions and 50 custom metrics). You register the cds in the Custom Definitions section of FB.
Now you need to know whether this is a dimension or a metric, as well as the scope of your dimension. It's much easier than it sounds. The rule of thumb is: if you want to be able to run mathematical aggregation functions on your dimension, then it's a metric. Otherwise - it's a dimension. So:
firebaseAnalytics.setUserProperty("user_id", userId) <-- dimension
param("name", levelName) <-- dimension
param("difficulty", difficulty) <-- dimension (or can be a metric, depends)
param("subscription_status", subscriptionStatus) <-- dimension (can be a metric too, but even less likely)
param("minutes", minutesSpentOnLevel) <-- metric
param("score", score) <-- metric
Now another important thing to understand is the scope. Because Firebase and GA4 are still, essentially just in Beta being actively worked on, you only have user or hit scope for the dimensions and only hit for the metrics. The scope basically just indicates how the value persists. In my example, we only need the user_id as a user-scoped cd. Because user_id is the user-level dimension, it is set separately form the logEvent function. Although I suspect you can do it there too. Haven't tried tho.
Now, we're almost there.
Finally, you don't want to use Firebase to look at your data. It's horrible at data presentation. It's good at debugging though. Cuz that's what it was intended for initially. Because of how horrible it is, it's always advised to link it to GA4. Now GA4 will allow you to look at the Firebase values much more efficiently. Note that you will likely need to re-register your custom dimensions from Firebase in GA4. Because GA4 is capable of getting multiple data streams, of which firebase would be just one data source. But GA4's CDs limits are very close to Firebase's. Ok, let's be frank. GA4's data model is almost exactly copied from that of Firebase's. But GA4 has a much better analytics capabilities.
Good, you've moved to GA4. Now, GA4 is a very raw not-officially-beta product as well as Firebase Analytics. Because of that, it's advised to first change your data retention to 12 months and only use the explorer for analysis, pretty much ignoring the pre-generated reports. They are just not very reliable at this point.
Finally, you may find it easier to just use SQL to get your analysis done. For that, you can easily copy your data from GA4 to a sandbox instance of BQ. It's very easy to do.This is the best, most reliable known method of using GA4 at this moment. I mean, advanced analysts do the export into BQ, then ETL the data from BQ into a proper storage like Snowflake or even s3, or Aurora, or whatever you prefer and then on top of that, use a proper BI tool like Looker, PowerBI, Tableau, etc. A lot of people just stay in BQ though, it's fine. Lots of BI tools have BQ connectors, it's just BQ gets expensive quickly if you do a lot of analysis.
Whew, I hope you'll enjoy analyzing your game's data. Data-driven decisions rock in games. Well... They rock everywhere, to be honest.
Is it possible to set the value of count to zero when the result to which count is applied is null.
SELECT count(status) FROM ( SELECT last("P-status") AS "status" FROM "autogen"."Pl" WHERE ("Platform" = 'Database-plat' AND "P-status" = 'ERROR') AND time >= now() - 1m GROUP BY time(500ms), "Node" fill(0) )
In this case if the inner query returns null (for all the Node), count doesnt give any value , since fill will be ignored. I need the value to be zero, so that if i have to perform any other operation on the returned result, it can be done.
If possible, how can it be done?
I know this is an old question, but as it still is very relevant and I have been struggling with this problem for over a year now, I'd like to answer to this unanswered question with the current status of this issue according to my research:
The Github issues here and here imply that this problem is known since 2016 and not really understood by the contributers as a problem, as there are questionable rationales for the implementation (like "it's not a bug, it's a feature, because ambiguities of multiple series") that can easily be answered with special rules for unique series identification, but there has not been much activity any more despite heavy interest of the user community. Another point is that they have published version 2.x, which relies more on their new querying language (Flux), so it is very likely they have more or less practically abandoned the 1.x branch with InfluxQL (maybe except for QL backwards compatibility in 2.x and some minor updates, not sure).
Meanwhile I updated Grafana several times, but I had to stick with InfluxDB 1.x for a couple of reasons and the Flux support changed at some point (deprecated Flux plugin, but Flux included in standard InfluxDB plugin, but latter doesn't really work), so that Flux in Grafana is basically not working any more for a while now. I hoped for a better handling of the counting problem there, but now I'm out of luck regarding counting anything in InfluxDB reliably. I even tried some tricks with sum() function, fancy grouping and dummy values that I need to resubtract again and whatnot, but it always boiled down to the same conclusion: InfluxDB can do a lot, but counting just doesn't work.
It's very unsatisfying, but there doesn't seem to be a way to achieve the "eager" goal of counting data points without a system of bloated queries, excessive use of strange rules, dummy values and an insecurity that any query might break any time or break if you need to query only a specific time frame (where any dummy value workaround might not work). And regarding the priority given, this might not be fixed in the near future.
The usecase
We got multiple changelogs stored in the database, and want to create a histogram monitoring the duration between changes.
The problem
There doesn't seem to be a way to set the start time of a Historgram.Timer, e.g we want to set it to lastUpdated given the current changelog.
Avenues of approach
1 Subclassing Histogram
Should work. However the java-lib use protected/package-private extensively, thus making it hard without copying large portions of the library.
2 Using reflection
After a Histogram.Timer is created it should be possible to use reflection to set the start field. The field is marked as private final, and thus a SecurityManager could stop us in some environments.
Ideas?
Neither of the solutions seems like the correct way to go, and I suspect that I'm overlooking a simpler solution (but could find anything at SO or google). We're using grafana to visualize our metrics, if thats at all helpful in this scenario.
You don't need to subclass Histogram, as you don't need to use Histogram.Timer only because your histogram is measuring times.
Simply call myHistogram.observe(System.now() - lastUpdated) every time you record a new change in the database.
I am still very new to Retrieve and Rank, and Document Conversion services, so I have been playing around with that lately.
I encountered a problem where when I upload a large document (100+ pages) - Retrieve and Rank would help me automatically break it up into answer units, which is great and helpful.
However, some questions only require ONE small line in the big chunks of answer units, is there a way that I can manually break further down the answer units that Retrieve and Rank service has provided me?
I heard that you can do it through JavaScript, but is there a way to do it through the UI?
I am contemplating to manually break up the huge doc into multiple smaller documents, but that could potentially lead to 100s of them - which is probably the last option that I'd resort to.
Any help or suggestions is greatly appreciated!
Thank you all!
First off, one clarification:
Retrieve and Rank does not break up your documents into answer units. That is something that the Document Conversion Service does when your conversion target is ANSWER_UNITS.
Regarding your question:
I don't fully understand exactly what you're trying to do, but if the answer units that are produced by default don't meet your requirements, you can customize different steps of the conversion process to adjust the produced answer units. Take a look at the documentation here.
Specifically, you want to make sure that the heading levels (for Word, PDF or HTML, depending on your document type) are defined in a way that
they detect the start of each answer unit. Then, make sure that the heading levels that you defined (h1, h2, h3, etc.) are included in the selector_tags list within the answer_units section.
Once your custom Document Conversion Service configuration produces the answer units you are looking for, you will be ready to send them to Retrieve and Rank to be indexed.
So I am working on a webservice to access our weather forecast data (10000 locations, 40 parameters each, hourly values for the next 14 days = about 130 million values).
So I read all about RESTful services and its ideology.
So I understand that an URL is adressing a ressource.
But what is a ressource in my case?
The common use case is that you want to get the data for a couple of parameters over a timespan at one or more location. So clearly giving every value its own URL is not pratical and would result in hundreds of requests. I have the feeling that my specific problem doesn't excactly fit into the RESTful pattern.
Update: To clarify: There are two usage patterns of the service. 1. Raw data; rows and rows of data for several locations and parameters.
Interpreted data; the raw data calculated into symbols (Suns & clouds, for example) and other parameters.
There is not one 'forecast'. Different clients have different needs for data.
The reason I think this doesn't fit into the REST-pattern is, that while I can actually have a 'forecast' ressource, I still have to submit a lot of request parameters. So a simple GET-request on a ressource doesn't work, I end up POSTing data all over the place.
So I am working on a webservice to access our weather forecast data (10000 locations, 40 parameters each, hourly values for the next 14 days = about 130 million values). ... But what is a ressource in my case?
That depends on the details of your problem domain. Simply having a large amount of data is not a good reason to avoid REST. There are smart ways and dumb ways to model and expose that data.
As you rightly see, your main goal at this point should be to understand what exactly a resource is. Knowing only enough about weather forecasting to follow the Weather Channel, I won't be much help here. It's for domain experts like yourself to make that call.
If you were to explain in a little more detail the major domain concepts you're working with, it might make it a little easier to give specific advice.
For example, one resource might be Forecast. When weatherpeople talk about Forecasts, what words keep coming up? When you think about breaking a forecast down into smaller elements, what words do you use to describe the pieces?
Do this process recursively, and you'll probably be able to make a list of important terms. Don't forget that these terms can describe things or actions. Think about what these terms really mean, what data you can use to model them, how they can be aggregated.
At this point you'll have the makings of something you can start building a RESTful system around - but not before.
Don't forget that a RESTful system is not a data dump wrapped in HTTP - it's a hypertext-driven system.
Also don't forget that media types are the point of contact between your server and its clients. A media type is only limited by your imagination and can model datasets of any size if you're clever about it. It can contain XML, JSON, YAML, binary elements such as a Bloom Filter, or whatever works for the problem.
Firstly, there is no once-and-for-all right answer.
Each valid url is something that makes sense to query, think of them as equivalents to providing query forms for people looking for your data - that might help you narrow down the scenarios.
It is a matter of personal taste and possibly the toolkit you use, as to what goes into the basic url path and what parameters are encoded. The debate is a bit like the XML debate over putting values in elements vs attributes. It is not always a rational or logically decided issue nor will everybody be kind in their comments on your decisions.
If you are using a backend like Rails, that implies certain conventions. Even if you're not using Rails, it makes sense to work in the same way unless you have a strong reason to change. That way, people writing clients to talk to Rails-based services will find yours easier to understand and it saves you on documentation time ;-)
Maybe you can use forecast as the ressource and go deeper to fine grained services with xlink.
Would it be possible to do something like this,Since you have so many parameters so i was thinking if somehow you can relate it to a mix of id / parameter combo to decrease the url size
/WeatherForeCastService//day/hour
www.weatherornot.com/today/days/x // (where x is number of days)
www.weatherornot.com/today/9am/hours/h // (where h is number of hours)