I was creating a basic scenario in Unity. Thi scene have 1 cube in the center of the room, and 1 camera(player).
I need to move the player around the cube like if was flying ( with movements at the top, bottom, left, right, inside and outside), very similar to when we move freely with the mouse on the development screen.
I need make this movement with the touch.
How can i to do?
Thanks!!
You can achieve almost all movements you want using a standard fps mobile controller: 1 joystick and a slide area for rotation. Your forward movement will be your player's forward direction(with W in unity you move always forward) and of course transform's left/right for strafe.
The tricky part is move up/down part(even in Unity editor you have to use 2 extra keys, Q&E) but you can always move up/down just looking in that direction.
if u use the unity standard asset 'cross platform input' (which is available in the standard asset pack for free,) then anything you program with a mouse event or click, will automatically call the corresponding touch event if use on a phone.
Related
I would like to move a tile with drag and drop in Unity 2D. The tile is a sprite. The scene is an 'Unblock me' or 'Blocked in' like gameplay.
Because the tiles in real life correspond to physical objects it seemed be to a good idea to model them with colliders and rigidbody. The border of the table surrunded with invisible colliders. I hoped these will constrain the moves of the tiles realistic, when the player moves them.
Then I implemented a simple (mouse based) drag and drop behavior which is worked perfectly except the moved tile penetrates to other tiles and the border, and sometimes jumps over them. Then I learned if I am overriding physics by explicitly setting transforms position (which I do exactly in my drag and drop implementation), this will happen. OK I accept, I should set only forces, ect. on rigidbody never directly the position.
Now the question:
I am stuck here. I still want to drag and drop like user experience, and some realistic visual result. When in the real life a player moves a tile, it seems it is "glued" to its finger. How can I achieve this (ot at least similar) with just applying forces? Any suggestions or point similar existing sample/blog code?
(I know as a backup plan I can omit all the physics and constrain the tile positions by code, and create some tweens to move the tiles. Is the real solution (what I am asking for) so complicated I should vote on this backup plan?)
Edit
According to comments I've added a video:
There is nothing wrong with the way you are manipulating your dragging. The beauty of developing is being able to do things in your own way. If it works for your game, then don't fret.
Now, i recommend:
Create a new physic material. Assets > Create > Physic Material
Set your new physic material inspector settings both to 0
Attach the physic material to all your wall object colliders. This should allow for your object being dragged to move smoothly against the walls without chopping.
Do a check to see if your mouse is over another collider. If so, then stop the movement in that direction.
Since your movements seem to always be on a single axis, on collision, tell your object to snap to the edge of the wall object. You know the Wall position and scales, also you have the position and scales of the object being dragged. with that you can write a function that will offset it to the correct position when the collision occurs.
Let me know if any of that works out :P
I’m starting a learning project. The idea is that you have an archer character that is static, that has a bow attached to it that shoots arrows to targets of varying difficulty.
Turns out that right at the start I’m stuck. How do I make it so that the bow rotates when the player clicks and holds the mouse anywhere on the screen? So I click+hold and move left/right and the bow rotates left/right to aim the shot. I’d like to also eventually make it portable to phones (so you’d tap+hold etc).
Stack Overflow isnt a code writing service but i will explain what you must do:
Method 1 (Exact Aiming):
For every frame the mouse is down:
Make a Ray from a screen point... hint (use
camera.ScreenPointToRay).
Get a far point along the Ray using ray.GetPoint(distance);.
Bow.Transform.LookAt(newPoint, Vector3.Up);.
Method 2 (Continuous Movement):
Make a variable oldMousePos to store a Vector2 location.
Record your initial screen click position into that variable on a
mouse down event.
Have a function that runs once every frame the mouse stays down.
For the direction of the rotation of the bow, you can use
(newMousePos - oldMousePos).normalized;.
For the speed of rotation for your bow, you can use (newMousePos -
oldMousePos).sqrMagnitude;.
I'm new to Unity and the is working on a personal project. In the following picture, you can see a blue plane in the middle, I want to use it as a ice plane and there should be no friction when user is walking on it. In another way, if I press 'w', the object should move forward until it hits an object. I know there's a built-in function called physic material, but it works only when the plane is tilt at some angle so that the object will slide down from the top to the bottom, but if the plane is placed in a horizontal level it will not work. Anybody has any suggestions for it, thanks.
Answering from my phone and off the top of my head, but look at using input.getaxisraw() to get your direction data then add forces. use triggers to stop the movement when you reach a trigger on another object. There were some good tutorials on Collisions and triggers on unity tutorials. To elaborate more, you can add colliders to the objects that you want your player object to interact with physically. So for your player object you can add code like:
OnTriggerEnter(collider c) {
// stop movement
}
I am working on a tabletop game that user controls using accelerometer in the phone. It is pretty similar to Labyrinth on iOS.
The scene contains a tabletop created using planes and cubes, and a sphere as a ball. As it works in Labyrinth game, on tilting phone ball should drop to the tilted side, while the camera stays centered to table. I am trying to do similar thing where user tilts the phone, and objects on table move to tilted side.
Currently, I add the x and z component to Physics.gravity on tilt. Sadly, this change in gravity does not affect the ball which stays put on the table. Use gravity is selected for the ball, and it drop down from height to the tabletop initially and then comes to halt. After the initial drop, ball does not react to any gravity change.
I have also tried rotating the whole table, but using transform.rotate does not work either. The table rotates perfectly, alongwith the camera, but the ball stays put hanging in the air. So, currently I am out of my depth about the issue.
Is there any other way to allow tilt action registered, so that ball moves to the tilted direction? I cannot use addforce function, as there are multiple objects which need to react to tilt, and it will be difficult to keep track of that many addforce calls. How else can I get it working?
See this post for some related information.
As for why your sphere is sticking to the table, can I assume your sphere has a rigidbody? If so, you need need to wake it up:
if (rigidbody.IsSleeping())rigidbody.WakeUp();
Ideally you would make that call only after detecting a change in orientation/gravity, not every frame.
I have a simple project built with Cocos2D and Chipmunk. So far it's just a Ball (body, shape & sprite) bouncing on the Ground (a static line segment at the bottom of the screen).
I implemented the ccTouchesBegan/Moved/Ended methods to drag the ball around.
I've tried both:
cpBodySlew(ballBody, touchPoint, 1.0/60.0f);
and
ballBody->p = cgPointMake(touchPoint.x,touchPoint.y);
and while the Ball does follow my dragging, it's still being affected by gravity and it tries to go down (which causes velocity problems and others).
Does anyone know of the preferred way to Drag an active Body while the physics simulation is going on?
Do I need somehow to stop the simulation and turn it back on afterwards?
Thanks!
Temporarily remove the body from the space.
If you want the object to have inertia when you release it, that's a different story. The cleanest way is to attach a fairly stiff spring between the ball and a temporary sensor body that moves under the control of your finger. When you let go with your finger, the ball will retain whatever kinematics it had while you were dragging it. Be sure not to remove the ball from the space in this case.
You aren't updating the velocity of the object when you aren't using cpBodySlew(). That is why it falls straight down.
A better way to do it is to use a force clamped pivot joint like the official demos do to implement mouse control. http://code.google.com/p/chipmunk-physics/source/browse/trunk/Demo/ChipmunkDemo.c#296