I have just installed Kubernetes on my MacOS using homebrew.
Now, in the terminal, I ran kubectl version command and the error message reads Unable to connect to the server: dial tcp 35.225.115.157:443: i/o timeout
How to solve this issue?
kubectl version makes a connection to both client and server (kubernetes master) in order to print the versions.
Run kubectl cluster-info and check if the server is up.
Related
I´m running windows 10 with WSL1 and ubuntu as distrib.
My windows version is Version 1903 (Build 18362.418)
I´m trying to connect to kubernetes using kubectl proxy within ubuntu WSL. I get a connection refused when trying to connect to the dashboard with my browser.
I have checked in windows with netstat -a to see active connections.
If i run kubectl within the windows terminal i have no problem to connect to kubernetes, so the problem is only happening when i try to connect with ubuntu WSL1.
I have also tried to run the following command
kubectl proxy --address='0.0.0.0' --port=8001 --accept-hosts='.*'
... but the connection is refused although i see that windows is listening to the port. Changing port to another port didn´t fix the proble. Disabling the firewall didnt´fix the problem as well.
Any idea ?
First thing to do would be to check if you able to safely talk to your cluster: (kubectl get svc -n kube-system, kubectl cluster-info)
If not check if $HOME/.kube folder was created. If not, run:
gcloud container clusters get-credentials default --region=<your_region>
I recently installed kubernetes on VMware and also configured few pods , while configuring those pods , it automatically used IP of the VMware and configured. I was able to access the application during that time but then recently i rebooted VM and machine which hosts the VM, during this - IP of the VM got changed i guess and now - I am getting below error when using command kubectl get pod -n <namspaceName>:
userX#ubuntu:~$ kubectl get pod -n NameSpaceX
Unable to connect to the server: dial tcp 192.168.214.136:6443: connect: no route to host
userX#ubuntu:~$ kubectl version
Client Version: version.Info{Major:"1", Minor:"14", GitVersion:"v1.14.1", GitCommit:"b7394102d6ef778017f2ca4046abbaa23b88c290", GitTreeState:"clean", BuildDate:"2019-04-08T17:11:31Z", GoVersion:"go1.12.1", Compiler:"gc", Platform:"linux/amd64"}
Unable to connect to the server: dial tcp 192.168.214.136:6443: connect: no route to host
kubectl cluster-info as well as other related commands gives same output.
in VMware workstation settings, we are using network adapter which is sharing host IP address setting. We are not sure if it has any impact.
We also tried to add below entry in /etc/hosts , it is not working.
127.0.0.1 localhost \n
192.168.214.136 localhost \n
127.0.1.1 ubuntu
I expect to run the pods back again to access the application.Instead of reinstalling all pods which is time consuming - we are looking for quick workaround so that pods will get back to running state.
If you use minikube sometimes all you need is just to restart minikube.
Run:
minikube start
I encountered the same issue - the problem was that the master node didn't expose port 6443 outside.
Below are the steps I took to fix it.
1 ) Check IP of api-server.
This can be verified via the .kube/config file (under server field) or with: kubectl describe pod/kube-apiserver-<master-node-name> -n kube-system.
2 ) Run curl https://<kube-apiserver-IP>:6443 and see if port 6443 is open.
3 ) If port 6443 you should get something related to the certificate like:
curl: (60) SSL certificate problem: unable to get local issuer certificate
4 ) If port 6443 is not open:
4.A ) SSH into master node.
4.B ) Run sudo firewall-cmd --add-port=6443/tcp --permanent (I'm assuming firewalld is installed).
4.C ) Run sudo firewall-cmd --reload.
4.D ) Run sudo firewall-cmd --list-all and you should see port 6443 is updated:
public
target: default
icmp-block-inversion: no
interfaces:
sources:
services: dhcpv6-client ssh
ports: 6443/tcp <---- Here
protocols:
masquerade: no
forward-ports:
source-ports:
icmp-blocks:
rich rules:
The common practice is to copy config file to the home directory
sudo cp /etc/kubernetes/admin.conf ~/.kube/config && sudo chown $(id -u):$(id -g) $HOME/.kube/config
Also, make sure that api-server address is valid.
server: https://<master-node-ip>:6443
If not, you can manually edit it using any text editor.
You need to export the admin.conf file as kubeconfig before running the kubectl commands. You may put this as your env variable
export kubeconfig=<path>/admin.conf
after this you should be able to run the kubectl command. I am hoping that your setup of K8S cluster is proper.
Last night I had the exact same error installing Kubernetes using this puppet module: https://forge.puppet.com/puppetlabs/kubernetes
Turns out that it is an incorrect iptables setting in the master that blocks all non-local requests towards the api.
The way I solved it (bruteforce solution) is by
completely remove alle installed k8s related software (also all config files, etcd data, docker images, mounted tmpfs filesystems, ...)
wipe the iptables completely https://serverfault.com/questions/200635/best-way-to-clear-all-iptables-rules
reinstall
This is what solved the problem in my case.
There is probably a much nicer and cleaner way to do this (i.e. simply change the iptables rules to allow access).
if you getting the below error then you also check once the token validity.
Unable to connect to the server: dial tcp 192.168.93.10:6443: connect: no route to host
Check your token validity by using the command kubeadm token list if your token is expired then you have to reset the cluster using kubeadm reset and than initialize again using command kubeadm init --token-ttl 0.
Then again check the status of the token using kubeadm token list. Note here the TTL value will be <forever> and Expire value will be <never>.
example:-
[root#master1 ~]# kubeadm token list
TOKEN TTL EXPIRES USAGES DESCRIPTION EXTRA GROUPS
nh48tb.d79ysdsaj8bchms9 <forever> <never> authentication,signing The default bootstrap token generated by 'kubeadm init'. system:bootstrappers:kubeadm:default-node-token
Ubuntu 22.04 LTS Screenshot
Select docker-desktop and run again your command, e.g kubectl apply -f <myimage.yaml>
Run minikube start command
The reason behind that is your minikube cluster with driver docker stopped
when you shutdown the system
To all those who are trying to learn and experiment kubernetes using Ubuntu on Oracle VM:
IP address is assigned to Guest OS/VM based on the network adapter selection. Based on your network adapter selection, you need to configure the settings in Oracle VM network section or your router settings.
See the link for most common Oracle VM network adapter.
https://www.nakivo.com/blog/virtualbox-network-setting-guide/
I was using bridge adapter which put VM and host OS in parallel. So the my router was randomly assigning IP to my VM after every restart and my cluster stopped working and getting the same exact error message posted in the question.
> k get pods -A
> Unable to connect to the server: dial tcp 192.168.214.136:6443: connect: no route to host
> systemctl status kubelet
> ........
> ........ "Error getting node" err="node \"node\" not found"
Cluster started working again after reserving static IP address to my VM in router settings.(if you are using NAT adapter, you should configure it in VM network settings)
When you are reserving IP address to your VM, make sure to assign the same old IP address which was used for configuring kubelet.
I had a working kops cluster. I deleted some unneeded igs and updated the cluster. Now kubectl won't connect to the cluster. I get the following error: Unable to connect to the server: dial tcp {ip} i/o timeout.
How do I go about debugging the issue?
as a first step I would try to run it again with higher log level, there logs are really good.
Note you probably want to redirect to a file ...
kops <whatever> -v 10 &> log.txt
I've installed docker on Debian 9.3 and created a swarm using 4 computers.
Now I am trying to install Kubernetes locally and am having some trouble getting things to work.
$ uname -a
Linux tma 4.9.0-4-amd64 #1 SMP Debian 4.9.65-3 (2017-12-03) x86_64 GNU/Linux
I'm trying to follow this guide:
https://kubernetes.io/docs/getting-started-guides/minikube/
I want to use Deb9 since that is what I use in our lab.
I am using KVM as the hypervisor.
Has anyone installed Kubernetes locally via Minikube successfully?
I get the following error: when I issue kubectl cluster-info as sudo and non-sudo
$kubectl cluster-info
Kubernetes master is running at localhost:8080 To further debug and diagnose cluster problems, use kubectl cluster-info dump. The connection to the server localhost:8080 was refused - did you specify the right host or port?
I have Minikube running on Debian.
I can reproduce your error if I don't have anything running. Most probably your cluster didn't start, you'll need to debug more.
This is a great Debian 9 + Minikube resource: https://medium.com/linagora-engineering/install-k8s-minikube-on-top-of-kvm-on-debian-9-9cd5b646063c
I got Kubernetes Minikube on my laptop (4cores, 8 GB RAM). I just performed the basic installation steps (got miniKube and kubectl, enabled the BIOS virtualization) and I am able to start the cluster:
C:\Users\me>minikube start
Starting local Kubernetes cluster...
Starting VM...
SSH-ing files into VM...
Setting up certs...
Starting cluster components...
Connecting to cluster...
Setting up kubeconfig...
Kubectl is now configured to use the cluster.
However, when I try to interact with the cluster, I allways get the same error, sample:
C:\Users\me>kubectl get pods --context=minikube
Unable to connect to the server: dial tcp 192.168.99.100:8443: connectex: A connection attempt failed because the connected party
did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
I execute minikube ip and I ping the result IP and I get a response. Also I tried to give more memory (3Gb vs the standard 2Gb) and nothing changed.
Am I doing something wrong here?
Thanks!
I had same issue as above. I found out that kubectl couldn't connect to the cluster and would throw up the error when i'm on a VPN connection. When I turned off my VPN client, it started working as fine.
I think it could be some problem with the cluster, when I run minikube status I've got the mixed results of cluster running and cluster stopped:
First run:
c:\> minikube status
minikube: Running
cluster: Stopped
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
Second run:
minikube: Running
cluster: Running
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
Third run:
minikube: Running
cluster: Stopped
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
The service is flapping.
UPDATED:
Connecting to the minikube vm using minikube ssh I realized the kubeconfig file have wrong path separator for certificates generated by minikube automatic configuration. The path on kubeconfig file stands for \var\lib\localkube\certs\ca.cert and it have to be /var/lib/localkube/certs/ca.cert and so on...
To update the file I have to copy the content of the orignal file to my desktop, fix the directory separators and save the correct file to /var/lib/localkube/kubeconfig and restart the service using:
sudo systemclt restart localkube.
I hope everyone can use minikube with this tip.
If it keep to hit 8443 connection issue when changed work environment, would simplify turn off TLS verification for minikube local cluster if there is not clue.
https://github.com/robertluwang/docker-hands-on-guide/blob/master/minikube-no-tls-verify.md
Hope it is helpful for you.
BR/
Robert
from the documentation:
for Troubleshooting
Run minikube start --alsologtostderr -v=7 to debug crashes
I had the same problem:
check if a some service of a VPN is running by checking the task management, for me, I had a running service of my VPN, so kill the task and try to run the command showed above