Hello everyone when i wanted to run blinking_led.py in python-opencv in windows 10 i faced this problem:
Traceback (most recent call last): File
"C:\Users\LifeSTYLE\AppData\Local\Programs\Python\Python36\TEST\blinking_led.py",
line 1, in
import RPi.GPIO as GPIO #Import raspberry Pi GPIO library ModuleNotFoundError: No module named 'RPi'
After that i have tried to install RPi.GPIO i faced this problem too:
error: command 'C:\Program Files (x86)\Microsoft Visual
Studio\2017\Community\VC\Tools\MSVC\14.16.27023\bin\HostX86\x64\cl.exe'
failed with exit status 2
[error: command 'C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Tools\MSVC\14.16.27023\bin\HostX86\x64\cl.exe' failed with exit status 2
Command "c:\users\lifestyle\appdata\local\programs\python\python36\python.exe
-u -c "import setuptools, tokenize;file='C:\Users\LIFEST~1\AppData\Local\Temp\pip-install-8sq29xb7\rpi.gpio\setup.py';f=getattr(tokenize,
'open', open)(file);code=f.read().replace('\r\n',
'\n');f.close();exec(compile(code, file, 'exec'))" install
--record C:\Users\LIFEST~1\AppData\Local\Temp\pip-record-t7ye6d1q\install-record.txt
--single-version-externally-managed --compile" failed with error code 1 in
C:\Users\LIFEST~1\AppData\Local\Temp\pip-install-8sq29xb7\rpi.gpio]1
If anyone could help please help!
I could not find any useful suggestion.
Thanks beforehand!!!
You can not use module RPi.GPIO on Windows machine, because there is no GPIO interface.
It will only works with Raspberry Pi.
Related
ERROR: Command errored out with exit status 1:
command: 'C:\Users\panda\anaconda3\envs\dmodel\python.exe' -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\Users\panda\AppData\Local\Temp\pip-req-build-0lhigfqj\bindings/torch\setup.py'"'"'; file='"'"'C:\Users\panda\AppData\Local\Temp\pip-req-build-0lhigfqj\bindings/torch\setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(file) if os.path.exists(file) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' egg_info --egg-base 'C:\Users\panda\AppData\Local\Temp\pip-pip-egg-info-h3yznucj'
cwd: C:\Users\panda\AppData\Local\Temp\pip-req-build-0lhigfqj\bindings/torch
Complete output (6 lines):
Traceback (most recent call last):
File "", line 1, in
File "C:\Users\panda\AppData\Local\Temp\pip-req-build-0lhigfqj\bindings/torch\setup.py", line 41, in
raise RuntimeError("Could not locate a supported Microsoft Visual C++ installation")
RuntimeError: Could not locate a supported Microsoft Visual C++ installation
Building PyTorch extension for tiny-cuda-nn version 1.6
----------------------------------------
WARNING: Discarding git+https://github.com/NVlabs/tiny-cuda-nn/#subdirectory=bindings/torch. Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
I am trying to install ruamel.yaml on a raspberry Pi system without a C compiler and encounter a build error installing ruamel.yaml.clib (pasted below).
I see this was previously addressed for ruamel.yaml>=0.15.41, <0.16.0 (How to install ruamel.yaml w/o native extension).
Note in the output below that the path from buildroot is not valid on the device running pip install but is from the device that built the image.
$ pip install ruamel.yaml~=0.16
Defaulting to user installation because normal site-packages is not writeable
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting ruamel.yaml~=0.16
Using cached ruamel.yaml-0.17.10-py3-none-any.whl (108 kB)
Collecting ruamel.yaml.clib>=0.1.2; platform_python_implementation == "CPython" and python_version < "3.10"
Using cached ruamel.yaml.clib-0.2.6.tar.gz (180 kB)
ERROR: Command errored out with exit status 1:
command: /usr/bin/python -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-2t0ptfu4/ruamel-yaml-clib/setup.py'"'"'; __file__='"'"'/tmp/pip-install-2t0ptfu4/ruamel-yaml-clib/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-zdtfb19x
cwd: /tmp/pip-install-2t0ptfu4/ruamel-yaml-clib/
Complete output (3 lines):
sys.argv ['/tmp/pip-install-2t0ptfu4/ruamel-yaml-clib/setup.py', 'egg_info', '--egg-base', '/tmp/pip-pip-egg-info-zdtfb19x']
test compiling /tmp/tmp_ruamel_5les1064/test_ruamel_yaml.c -> test_ruamel_yaml compile error: /tmp/tmp_ruamel_5les1064/test_ruamel_yaml.c
Exception: command '{path from buildroot}/aarch64-buildroot-linux-gnu-gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
A preferred solution would be to have a ruamel.yaml.clib wheel for ARM architectures or to make clib dependency optional (pip install ruamel.yaml[clib])
I'm not sure why this broke after 0.16, but I'll try to have a look as to why this fails again (it might be that setuptools now throws a different Exception that is not caught).
Wheels for ruamel.yaml.clib in aarch64 architecture are availalbe on piwheels.
You should be able to install those after adding:
[global]
extra-index-url=https://www.piwheels.org/simple
to /etc/pip.conf.
Disclaimer: I have no control over how wheels on piwheels are generated.
I tried setting up virtual environment for Python 3.9 using virtualenvwrapper and got this error.
➜ mkvirtualenv env --python=$(which python3.9)
RuntimeError: failed to query /usr/bin/python3.9 with code 1 err: 'Traceback (most recent call last):\n File "/home/sid/.local/lib/python3.6/site-packages/virtualenv/discovery/py_info.py", line 16, in <module>\n from distutils import dist\nImportError: cannot import name \'dist\' from \'distutils\' (/usr/lib/python3.9/distutils/__init__.py)\n'
What am I missing?
apt-get install -y python3.9-distutils
then it should work fine.
I'm trying to install a private python module with command: "pip install . -i "private url" "
I had this error:
Command "python setup.py egg_info" failed with error code 1 in
C:\Users\hwi_pi\AppData\Local\Temp\pip-req-build-rnoryb6e\
I uninstall Python 38 and reinstall it.
Pip is updated and setup_tools is also updated.
And now I have this error:
D:\L1\onelib\trx-5g>D:\L1\onelib\venv\Scripts\pip.exe install . -i https://artifactory-espoo1..com/artifactory/api/pypi/ulphy-pypi-prod-virtual/simple
Looking in indexes:
https://artifactory-espoo1..com/artifactory/api/pypi/ulphy-pypi-prod-virtual/simple,
https://artifactory-espoo2.***********.com/artifactory/ap
i/pypi/mn-l1-pz-int-lib-local/simple Processing d:\l1\onelib\trx-5g
ERROR: Command errored out with exit status 1:
command: 'd:\l1\onelib\venv\scripts\python.exe' -c 'import sys, setuptools, tokenize; sys.argv[0] =
'"'"'C:\Users\hwi_pi\AppData\Local\Temp\pip-req-build-_4yae_lz\se
tup.py'"'"';
file='"'"'C:\Users\hwi_pi\AppData\Local\Temp\pip-req-build-_4yae_lz\setup.py'"'"';f=getattr(tokenize,
'"'"'open'"'"', open)(file);code=f.read().repla ce('"'"'\r\n'"'"',
'"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))'
egg_info --egg-base
'C:\Users\hwi_pi\AppData\Local\Temp\pip-pip-egg-info-zvlq1hsf'
cwd: C:\Users\hwi_pi\AppData\Local\Temp\pip-req-build-_4yae_lz
Complete output (15 lines):
Traceback (most recent call last):
File "", line 1, in
File "C:\Users\hwi_pi\AppData\Local\Temp\pip-req-build-_4yae_lz\setup.py",
line 23, in
version=os.environ.get('CI_COMMIT_TAG', f'0.0.0+{get_local_version_label()}'),
File "C:\Users\hwi_pi\AppData\Local\Temp\pip-req-build-_4yae_lz\setup.py",
line 17, in get_local_version_label
commit_hash = subprocess.check_output(COMMAND.split()).decode('utf-8').strip()
File "C:\Users\hwi_pi\AppData\Local\Programs\Python\Python38\lib\subprocess.py",
line 411, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "C:\Users\hwi_pi\AppData\Local\Programs\Python\Python38\lib\subprocess.py",
line 489, in run
with Popen(*popenargs, **kwargs) as process:
File "C:\Users\hwi_pi\AppData\Local\Programs\Python\Python38\lib\subprocess.py",
line 854, in init
self._execute_child(args, executable, preexec_fn, close_fds,
File "C:\Users\hwi_pi\AppData\Local\Programs\Python\Python38\lib\subprocess.py",
line 1307, in _execute_child
hp, ht, pid, tid = _winapi.CreateProcess(executable, args,
FileNotFoundError: [WinError 2] The system cannot find the file specified
---------------------------------------- ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for
full command output.
Where the logs are located ?
I'm on Windows 10.
Python 3.8.5.
I launched this command via Pycharm and via cmd windows and same result.
I tried to run the command in administration mode; and same result.
I have tried every solution available on stackoverflow and nothing solves my error.
I tried to find C:\Users\hwi_pi\AppData\Local\Temp\pip-req-build-_4yae_lz\setup.py to see the file setup.py but foled pip-req-build-_4yae_lz doesn't exist.
I can access to https://artifactory-espoo1.************.com/artifactory/api/pypi/ulphy-pypi-prod-virtual/simple via firefox; but I can't download it in .zip for example
Someone to help please ?
I need to install robotframework-autoitlibrary to use on my test cases.
My problem is when I try to install AutoIt Library through command line with the following command:
pip install -U robotframework-autoitlibrary --no-cache-dir --pre
I have this error:
C:\windows\system32>pip install -U robotframework-autoitlibrary --no-cache-
dir --pre
Collecting robotframework-autoitlibrary
Downloading
https://files.pythonhosted.org/packages/4e/a4/9e51fe35b1da7a006b773c9c234f78e89bcc4f267152c4e9fa8260631fa8/robotframework-autoitlibrary-1.2.2.zip (701kB)
100% |################################| 706kB 1.6MB/s
Complete output from command python setup.py egg_info:
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "c:\users\user-a~1\appdata\local\temp\pip-install-
oro1ov\robotframework-autoitlibrary\setup.py", line 93, in <module>
destPath = os.path.normpath(os.path.join(os.getenv("HOMEDRIVE"),
r"\RobotFramework\Extensions\AutoItLibrary"))
File "c:\python27\lib\ntpath.py", line 65, in join
result_drive, result_path = splitdrive(path)
File "c:\python27\lib\ntpath.py", line 115, in splitdrive
if len(p) > 1:
TypeError: object of type 'NoneType' has no len()
----------------------------------------
Command "python setup.py egg_info" failed with error code 1 in
c:\users\user-a~1\appdata\local\temp\pip-install-oro1ov\robotframework-
autoitlibrary\
My currently installed python packages and their versions are:
Pillow==5.3.0
Pygments==2.3.1
pypiwin32==223
Pypubsub==4.0.0
pywin32==224
robotframework==3.1
robotframework-ride==1.5.2.1
robotframework-selenium2library==3.0.0
robotframework-seleniumlibrary==3.3.0
selenium==3.141.0
six==1.12.0
typing==3.6.6
urllib3==1.24.1
wxPython==4.0.3
I already try this command:
pip install --upgrade setuptools
When input echo %HOMEDRIVE%, the output is:
C:\Users\cmpeixoto>echo %HOMEDRIVE%
C:
Thanks for your help,
The error looks like the environment variable HOMEDRIVE is not set, even though it has a value according to your test (the library installer uses it to copy some files).
Can you try this - manually set it, and straight after that run the pip - in the same Command Prompt (cmd) session:
set HOMEDRIVE=C:
pip install -U robotframework-autoitlibrary --no-cache-dir --pre