I have bought, downloaded and then installed uFlex for Unity. The install seemed to go without any errors, but when I try to run any of the example scenes I get lots of errors. The first and most serious sounding of which is:
DllNotFoundException: flexRelease_x64
uFlex.FlexSolver.Start () (at Assets/uFlex/Scripts/Solver/FlexSolver.cs:102)
Also the scenes don't seem to run/work. Have tried googling to see if it's a common error but that didn't show up anything. Tried finding the missing DLL but not sure where to put it, or whether it's platform/version specific?
Any thoughts on how to troubleshoot this
Anyone else have similar issues?
Not sure if it's relevant but I'm running Unity Version 2017.2.ob11 Personal, and my OS is Ubuntu 16.04.5 LTS. I have windows installed as well - is switching to running Unity under Windows likely to help?
It won't and shouldn't work on Linux at this point.
Read the requirement from the plugin page:
NVidia GPU with at least CUDA 3.0 compute capability
Windows 64 bit (Win 32bit experimental, Android and Linux support planned)
The support is currently for Windows. You get the exception because the dll for Linux has not been provided. It can't load Windows dll on Linux. If the native side (C++) of the plugin is open-source, you can compile it for Linux and include it in your project then it should work. Since it's not, your only option at this moment is to switch to Windows.
Related
We’ve been trying to get SikuliX 2.0.5 to run on a RHEL 8 system, and not having much luck.
We went through the instructions on this webpage:
https://sikulix-2014.readthedocs.io/en/latest/newslinux.html#newslinux
We started on RHEL 7, but the OpenCV shared library required a newer version of GLIBC than is standard on RHEL 7 (version ‘GLIBC_2.27’ not found (required by ~/.Sikulix/SikuliLibs/libopencv_java430.so)), so we moved up to RHEL 8. We had to build OpenCV (v4.3.0) from source because we could not find a java companion package for RHEL 8, which required quite a few other dependencies, but in the end we got it built with most options enabled, and installed as root on the system. We also got Tesseract installed via a package, as well as xdotool and wmctrl.
We are setting LD_LIBRARY_PATH to ensure that the OpenCV libs are picked up, and when we run with the “-v -c” options to the IDE, there are no obvious problems reported. It seems to believe it is moving the mouse, though we can see that it is not, and when we try to capture a screenshot, the “canvas” from which to capture is either uninitialized/garbage frame buffer memory, or a totally black screen. On rare occasions we have seen the actual desktop, but most times we do not.
Originally the system had 2 monitors, but was subsequently reconfigured to a single display system. We were originally running remotely over NoMachine, but have also tried running locally and observed no difference in behavior.
Any pointers or suggestions would be most welcome. Given that no error messages are being reported, we are out of ideas for how to proceed in debugging the problem. It appears that more native support is provided for Debian-based systems, but we’re attempting to validate a product which only advertises support for RHEL systems, so we’d prefer to get it working in this environment if at all possible.
I am trying to run EasyPHP on Windows 10 (64 bit) system. Initially the error was regarding msvcr110.dll missing, which I resolved somehow. Now its showing the error of 0xc00007b unable to start program correctly. I have tried to run the compatibility troubleshoot as well as run as administrator option. Its just not working. Any other effective solutions ?
This usually happens when you have mix of x86 and x64 libraries installed. You should probably uninstall all x86 versions of Microsoft Visual C++ Redistributables and install their x64 bit counterparts (just google them and make sure you download 64 bit version of that library).
So I will start off by saying that I do NOT want know how to setup or run QT on the pi. I am specifically trying to setup Qt Creator 4.0.3 (Based on Qt 5.7.0 (MSVC 2013, 32 bit)) to write and compile C++ and the run it on the Raspberry pi 2. I have found that running qt on the pi is far to slow.
I have searched for two days to find the right toolchain download for qt/raspberry and its corresponding qt configuration. Nothing seems to work. I have found what seems like a thousand dead ends searching the web. I can write and compile apps for windows console fine. But finding information to cross compile for raspberry seems to be an elusive Unicorn!
Does anyone have this working??? If so which of the many toolchains did you use? And please help me replicate your QT configuration. The closest I have come is using the GCC ARM Embedded toolchain but I cant seem to get the QT options set correctly and I believe that only gets me part of the way there. My ultimate goal is to control GPIO and use the RadioHead library.
Thanks in advance!
I also wanted to do that, and I actually achieved it, It's called "cross-compilation", you build on the Main PC and then compile it to the target.
Initially I wanted to use my main PC with windows 10, but I ended creating a linux partition on my pc to do it since I didn't found any way to do it with windows.
Qt has a very comprehensive tutorial with Qt5 and RaspberryPi2 (both with linux), the only problem is you need linux on your pc to do it. If you want to do this I would suggest following this steps:
Create a linux partition with the same os as in the pi (for example raspbian and debian) and name the username (in linux) "pi" and the password "raspberry". This will help you with external libraries.
Install Qt for Linux on your new partition
Follow Qt's tutorial on https://wiki.qt.io/RaspberryPi2EGLFS
The tutorial is really straightforward, I really recommend it.
Good Luck.
I'm using Ubuntu 14.04 (64 bit). After installing leJOS_NXJ_0.9.1beta-3, I was able to flash the NXT device. However, when I tried to upload a program, it showed a message "Found NXT: NXT 0016530CDF15" and then just stuck there.
I also tried Eclipse with leJOS plugin, and got the same problem. It showed
Program has been linked successfully
Uploading ...
Found NXT: NXT 0016530CDF15
and it got stucked there.
Can anybody help me with this issue?
Thanks,
Thuy
This site might be able to help, it provides the information to install and configure correctly all the software necessary for you to develop Java programs for the NXT, maybe by following this site it will hopefully fix the problem.
This tutorial will show you how to install and configure all the software necessary for you to develop Java programs for the LEGO Mindstorms NXT. Java is much more powerful and flexible than the original NXT-G software that LEGO provides. We will be using the Eclipse editor to write the actual Java code and to download this into the NXT. This combination enables you to conveniently write software and to quickly test it on the NXT. Of course there are many other Java editors, but we consider this combination to be particularly convenient. This tutorial focuses on the Windows XP platform, A Mac OS X tutorial is also available. We have two additional steps for Windows Vista. You will work through the following five steps - See more at: http://www.bartneck.de/2008/03/04/java-lego-nxt-eclipse-tutorial/#sthash.h1ZOZvlX.dpuf
all, I implemented an application in my laptop (vista) with PyQt and it worked quite well. But if I want to run it in a desktop of Windows XP system, an error occured! It says the configuration was wrong. What is the reason (by this i mean does it matter which system I used??)and how to solve it please? thanks!!!
More info would be useful, but this sounds familiar to a problem I had when freezing apps using py2exe. Is this your exact error message?:
The application has failed to start because the application configuration is incorrect.
Reinstalling the application may fix the problem.
I managed to get around this by installing the Microsoft Visual C++ 2008 SP1 Redistributable Package from http://download.microsoft.com.
This was an error I had when using py2exe. After switching over to PyInstaller, which bundles the runtimes during freezing, the problems went away without having to install the C++ runtimes on an XP machine. There may even be a way to bundle the runtimes using py2exe, but I've not looked.