[Windows 10] I have "Microsoft VS Code (User Setup)" installed in a custom directory and whenever I try to update it this shows up:
and then this
Log Info
Dec 23 11:42:40.673 INFO Starting: C:\Users\jeremy\AppData\Local\Programs\Microsoft VS Code\Code.exe, false
Dec 23 11:42:40.674 ERRO Bad arguments: Code path doesn't seem to exist: C:\Users\jeremy\AppData\Local\Programs\Microsoft VS Code\Code.exe
How do I change the path to point it to the right directory where "Code.exe" exists?
I had the same problem recently. I ended up reinstalling VS Code.
Do I lose my settings?
No. Note that I did not uninstall VS Code, I just downloaded the installer from the website and installed VSCode. This won't hurt, as it does not touch your settings and extensions.
What I tried
I first tried to visit the path mentioned in the error log, and I noticed that the folder _ within that directory contained the new VS Code version, downloaded by the updater.
So the path should have been C:\Users\myusername\AppData\Local\Programs\Microsoft VS Code\_\Code.exe instead, perhaps.
I tried to move all files from _ to their parent directory, and then, in VS Code, Help » Restart to update. This opened the new version of VS Code, but after closing it and starting it from the original install location (or through a shortcut I have always been using), the old version was still loaded. So apparently, this "trick" didn't work.
Then I tried to make a symbolic link to Code.exe within the _ directory, so the VS Code updater would find Code.exe. This caused roughly the same things to happen. So, this didn't work either.
At last, I decided to just download VS Code from their website, and simply install it. This seemed the most simple option to me.
Create a hard link for Code.exe using mklink, works for me.
Command should look like this (depends where your custom installation is, my in C:/Program Files/Microsoft VS Code/):
mklink /H "C:/Users/$username/AppData/Local/Programs/Microsoft VS Code/Code.exe" "C:/Program Files/Microsoft VS Code/Code.exe"
Related
I've put Visual Studio Code on OneDrive, for the purpose of syncing it with its settings across my devices.
However, extensions are stored in %USERPROFILE%\.vscode\extensions on Windows.
Is it possible to change this folder's location so I can put it in the main Visual Studio Code folder?
At first I thought that copying the extensions in the resources\app\extensions of Visual Studio Code folder will be a nice workaround, but that doesn't work.
I've also searched for a solution on the documentation page and in the user settings, with no results.
What I did - after installing Visual Studio Code for the first time, I checked the documentation and added at the end of 'Target' field of editor's shortcut the following (there's a space before the two dashes):
--extensions-dir="DRIVELETTER:\VSCODE\extensions"
--user-data-dir="DRIVELETTER:\VSCODE\settings"
where DRIVERLETTER and VSCODE are the corresponding drive and directory where Visual Studio Code is installed. So mine looks like this:
"D:\Microsoft VS Code\Code.exe" --extensions-dir="D:\Microsoft VS Code\extensions"
Here is for the user data directory:
"D:\Microsoft VS Code\Code.exe" --user-data-dir="D:\Microsoft VS Code\settings"
Accessing the 'Target' field is done by right-clicking the shortcut and choosing 'Properties'
Anyway, there's a simpler solution to that problem - just use the portable version of Visual Studio Code. It works under Windows, Linux, and macOS:
Enable Portable Mode
Windows and Linux
After unzipping the Visual Studio Code download, simply create a data folder within Visual Studio Code's folder:
|- VSCode-win32-x64-1.25.0-insider
| |- Code.exe (or code executable)
| |- data
| |- ...
From then on, that folder will be used to contain all Visual Studio Code data, including session state, preferences, extensions, etc.
The data folder can be moved to other Visual Studio Code installations. This is useful for updating your portable Visual Studio Code version: simply move the data folder to a newer extracted version of Visual Studio Code.
macOS
On macOS, you need to place the data folder as a sibling of the application itself. Since the folder will be alongside the application, you need to name it specifically so that Code can find it. The default folder name is code-portable-data:
|- Visual Studio Code.app
|- code-portable-data
Portable mode won't work if your application is in quarantine, which happens by default if you just downloaded Visual Studio Code. Make sure you remove the quarantine attribute, if portable mode doesn't seem to work:
xattr -dr com.apple.quarantine Visual\ Studio\ Code.app
Note: On Insiders, the folder should be named code-insiders-portable-data.
UPDATE 14.12.2021
From Visual Studio Docs
Note: Do not attempt to configure portable mode on an installation from the Windows User or System installers. Portable mode is only supported on the Windows ZIP (.zip) archive. Note as well that the Windows ZIP archive does not support auto update.
A little hack:
Create a symbolic link to the folder %USERPROFILE%\.vscode\extensions under the Visual Studio Code install path.
https://code.visualstudio.com/docs/editor/extension-gallery
code --extensions-dir 'new_directory_to_set'
Set the root path for extensions.
Follow the below steps for changing the extension path in VS.
Set "code" path in environment variable.
path = VS_CODE_INSTALL_DIRECTORY/bin;
Open VS , in VS terminal execute the below command.
code --extensions-dir "new_directory_path"
Install the required extension.
All Done.
Note:Dont forget to vote the answer
According to this page, after installing VS Code we should make a language profilers folder like this:
mkdir code_profiles
cd code_profiles
mkdir code-ruby
cd code-ruby
mkdir exts
mkdir data
For Windows, I prepared a batch file (.bat) for each language I work on, it contains this line:
Start "" "D:\programs\VSCode\code.exe" --extensions-dir D:\programs\VSCode\code_profiles\code-python\exts --user-data-dir D:\programs\VSCode\code_profiles\code-python\data .
This is for Python. If I work on PHP, I will make code-php folder, then make exts and data folders in it and prepare another batch file for PHP, just like the one I made for python.
I put this batch file on the main project folder then double click on it to run VS Code with the preferred profile.
I have installed visual studio 2019 which works fine for c++ but unable to create folders and sections to store multiple code files. So thought of switching to visual studio code and followed all tutorials available on youtube and documentation. But Visual studio IDE has got nothing showing up when Run Build task is initiated, which is expected to show the c++ extension downloaded. Mingw64 is installed and checked in the terminal too.
no output or terminal opened on Run
compiler installation checked
From the image attached regarding no output in the terminal or terminal opened, it looks like the exe is made because it says 'Build finsihed succesfully'. You'll need to run this executable from the terminal.
For this, if youre in the same directory all you have to do is type the filename. helloworld.exe in the cmd, if its powershell, then ./helloworld.exe. (Also note that for exe files you dont need to explicitly mention .exe at the end of the file name)
The powershell method should work on cmd too.
And if youre not in the same directory as the executable, you can either change directory by typing cd path/to/file and proceed as above, or run directly by typing path/to/file/helloworld.exe. where path/to/file is the directory of your helloworld.exe file
I am trying to update my VS Code but am getting an error message: Updates may fail due to anti virus software and/or runaway processes.
A log file stemming from my Users was attached, but I am not sure what to check for. I am still new to computers and programming.
I copied the Code.exe file from where my program was installed and pasted it to the temp map: C:\Users\YOUR_USERNAME\AppData\Local\Programs\Microsoft VS Code
I reran the update and it works.
Run the update setup file, with a name like "CodeSetup-stable-...exe", in the following location:
C:\Users\<:User>\AppData\Local\Temp\vscode-update-system-x64
Replace <:User> with your username. And make sure VS Code is closed.
The same problem happened to me as well. It was because I installed VS Code in another directory other than the default location. The problem happened because after downloading the update in the Temp directory, VS Code tried to locate the previous installation in the default location to update it. As it failed, the update setup file remained with the temporary files. The problem was solved by manually installing the update.
This is how I resolved the problem:
Close VSCode.
Run VSCode AS ADMINISTRATOR by right clicking in the VS Code icon. This process opens VScode.
Now run the same VSCODE update as usual from inside VSCode.
VSCode closes after the update process and the latest VSCODE version is installed.
This happens because you installed VSCode in a specific directory, delete and download again but leave the default directory. This is because the update file looks for the default directory
This problem appeared to me because I moved the files of the setup of the vscode from Partition to another, and the solution was very simple. I opened the file that was in the path that appeared in the alert, and the problem was solved.
Just make sure any instance vscode was closed!
I have just started with löve because of an internet course I'm on, and I'm using Visual studio code as my editor. The course recommends that I use the "Love2D Support" extension with Visual Studio. It allows me to run the code directly from VS by pressing Command + L.
Although when I do it, VS outputs me this error:
The setting specified in pixelbyte.love2d.path must be an executable file, not a directory. Check your settings.
The path I have input in the settings is /Users/My_Username/Desktop/love.app
I am 100% sure that it is the correct directory. What is the problem?
Thanks for answering!
The actual executable file in Mac is /Applications/love.app/Contents/MacOS/love so put this in your pixelbyte.love2d.path command in vscode and you are good to go.
I know I can use command "code" to open VS code or file, but I don't know what should I do to make it possible after I install VS code in Ubuntu.Thanks.
Launching from the Command Line
You can launch VS Code from the command line to quickly open a file, folder, or project. Typically, you open VS Code within the context of a folder. We find the best way to do this is to simply type:
code .
Tip: We have instructions for Mac users in our Setup topic that enable you to start VS Code from within a terminal. We add the VS Code executable to the PATH environment variable on Windows and Linux automatically during installation.
Sometimes you will want to open or create a file. If the specified files does not exist, VS Code will create them for you:
code index.html style.css readme.md
Tip: You can have as many file names as you want separated by spaces.
Source: https://code.visualstudio.com/Docs/editor/codebasics
So, there are a couple of solutions for this.
I've linked a video that shows you how to add vscode to $PATH
(which didn't work for me because I couldn't find the "shell:install path" command)
I uninstalled the vscode from my ubuntu and re-installed using sudo snap install --classic code
(This method worked for me)
Tell me which one works for you... and if you have extensions installed to your vscode then i guess you ought to make a backup or something.
Link to the video: https://youtu.be/iP5FKZXtDBs