Related
This question already has answers here:
What makes Lisp macros so special?
(15 answers)
Closed 3 months ago.
I keep reading that Lisp macros are one of the most powerful features of the language. But reading over the specifications and manuals, they are just functions whose arguments are unevaluated.
Given any macro (defmacro example (arg1 ... argN) (body-forms)) I could just write (defun example (arg1 ... argN) ... (body-forms)) with the last body-form turned into a list and then call it like (eval (example 'arg1 ... 'argN)) to emulate the same behavior of the macro. If this were the case, then macros would just be syntactic sugar, but I doubt that syntactic sugar would be called a powerful language feature. What am I missing? Are there cases where I cannot carry out this procedure to emulate a macro?
I can't talk about powerful because it can be a little bit subjective, but macros are regular Lisp functions that work on Lisp data, so they are as expressive as other functions. This isn't the case with templates or generic functions in other languages that rely more on static types and are more restricted (on purpose).
In some way, yes macros are simple syntactic facilities, but you are focused in your emulation on the dynamic semantics of macros, ie. how you can run code that evaluates macros at runtime. However:
the code using eval is not equivalent to expanded code
the preprocessing/compile-time aspect of macros is not emulated
Lexical scope
Function, like +, do not inherit the lexical scope:
(let ((x 30))
(+ 3 4))
Inside the definition of +, you cannot access x. Being able to do so is what "dynamic scope" is about (more precisely, see dynamic extent, indefinite scope variables). But nowadays it is quite the exception to rely on dynamic scope. Most functions use lexical scope, and this is the case for eval too.
The eval function evaluates a form in the null lexical environment, and it never has access to the surrounding lexical bindings. As such, it behaves like any regular function.
So, in you example, calling eval on the transformed source code will not work, since arg1 to argnN will probably be unbound (it depends on what your macro does).
In order to have an equivalent form, you have to inject bindings in the transformed code, or expand at a higher level:
(defun expand-square (var)
(list '* var var))
;; instead of:
(defun foo (x) (eval (expand-square 'x))) ;; x unbound during eval
;; inject bindings
(defun foo (x) (eval `(let ((z ,x)) (expand-square z))))
;; or expand the top-level form
(eval `(defun foo (x) ,(expand-square 'x)))
Note that macros (in Common Lisp) also have access to the lexical environment through &environment parameters in their lambda-list. The use of this environment is implementation dependent, but can be used to access the declarations associated with a variable, for example.
Notice also how in the last example you evaluate the code when defining the function, and not when running it. This is the second thing about macro.
Expansion time
In order to emulate macros you could locally replace a call to a macro by a form that emulates it at runtime (using let to captures all the bindings you want to see inside the expanded code, which is tedious), but then you would miss the useful aspect of macros that is: generating code ahead of time.
The last example above shows how you can quote defun and wrap it in eval, and basically you would need to do that for all functions if you wanted to emulate the preprocessing work done by macros.
The macro system is a way to integrate this preprocessing step in the language in a way that is simple to use.
Conclusion
Macros themselves are a nice way to abstract things when functions can't. For example you can have a more human-friendly, stable syntax that hides implementation details. That's how you define pattern-matching abilities in Common Lisp that make it look like they are part of the language, without too much runtime penalty or verbosity.
They rely on simple term-rewriting functions that are integrated in the language, but you can emulate their behavior either at compile-time or runtime yourself if you want. They can be used to perform different kinds of abstraction that are usually missing or more cumbersome to do in other languages, but are also limited: they don't "understand" code by themselves, they don't give access to all the facilities of the compiler (type propagation, etc.). If you want more you can use more advanced libraries or compiler tools (see deftransform), but macros at least are portable.
Macros are not just functions whose arguments are unevaluated. Macros are functions between programming languages. In other words a macro is a function whose argument is a fragment of source code of a programming language which includes the macro, and whose value is a fragment of source code of a language which does not include the macro (or which includes it in a simpler way).
In very ancient, very rudimentary, Lisps, before people really understood what macros were, you could simulate macros with things called FEXPRs combined with EVAL. A FEXPR was simply a function which did not evaluate its arguments. This worked in such Lisps only because they were completely dynamically scoped, and the cost of it working was that compilation of such things was not possible at all. Those are two enormous costs.
In any modern Lisp, this won't work at all. You can write a toy version of FEXPRs as a macro (this may be buggy):
(defmacro deffex (fx args &body body)
(assert (every (lambda (arg)
(and (symbolp arg)
(not (member arg lambda-list-keywords))))
args)
(args) "not a simple lambda list")
`(defmacro ,fx ,args
`(let ,(mapcar (lambda (argname argval)
`(,argname ',argval))
',args (list ,#args))
,#',body)))
So now we could try to write a trivial binding construct I'll call with using this thing:
(deffex with (var val form)
(eval `(let ((,var ,val)) ,form)))
And this seems to work:
> (with a 1 a)
1
Of course, we're paying the cost that no code which uses this construct can ever be compiled so all our programs will be extremely slow, but perhaps that is a cost we're willing to accept (it's not, but never mind).
Except, of course, it doesn't work, at all:
> (with a 1
(with b 2
(+ a b)))
Error: The variable a is unbound.
Oh dear.
Why doesn't it work? It doesn't work because Common Lisp is lexically scoped, and eval is a function: it can't see the lexical bindings.
So not only does this kind of approach prevent compilation in a modern Lisp, it doesn't work at all.
People often, at this point, suggest some kind of kludge solution which would allow eval to be able to see lexical bindings. The cost of such a solution is that all the lexical bindings need to exist in compiled code: no variable can ever be compiled away, not even its name. That's essentially saying that no good compilers can ever be used, even for the small part of your programs you can compile at all in a language which makes extensive use of macros like CL. For instance, if you ever use defun you're not going to be able to compile the code in its body. People do use defun occasionally, I think.
So this approach simply won't work: it worked by happenstance in very old Lisps but it can't work, even at the huge cost of preventing compilation, in any modern Lisp.
More to the point this approach obfuscates the understanding of what macros are: as I said at the start, macros are functions between programming languages, and understanding that is critical. When you are designing macros you are implementing a new programming language.
Say I have macros foo and bar. If I write (foo (bar)) my understanding is that in most (all?) lisps foo is going to be given '(bar), not whatever bar would have expanded to had it been expanded first. Some lisps have something like local-expand where the implementation of foo can explicitly request the expansion of its argument before continuing, but why isn't that the default? It seems more natural to me. Is this an accident of history or is there a strong reason to do it the way most lisps do it?
I've been noticing in Rust that I want the macros to work this way. I'd like to be able to wrap a bunch of declarations inside a macro call so that the macro can then crawl the declarations and generate reflection information. But if I use a macro to generate the definitions that I want crawled, my macro wrapping the declarations sees the macro invocations that would generate the declarations rather than the actual declarations.
If I write (foo (bar)) my understanding is that in most (all?) lisps foo is going to be given '(bar), not whatever bar would have expanded to had it been expanded first.
That would restrict Lisp such that (bar) would need to be something that can be expanded -> probably something which is written in the Lisp language.
Lisp developers would like to see macros where the inner stuff can be a completely new language with different syntax rules. For example something, where FOO does not expand it's subforms, but transpiles/compiles a fully/partially different language to Lisp. Something which does not have the usual prefix expression syntax:
Examples
(postfix (a b +) sin)
-> (sin (+ a b))
Here the + in the macro form is not the infix +.
or
(query-all (person name)
where (person = "foo") in database DB)
Lisp macros don't work on language parse trees, but arbitrary, possibly nested, s-expressions. Those don't need to be valid Lisp code outside of that macro -> don't need to follow the usual syntax / semantics.
Common Lisp has the function MACROEXPAND and MACROEXPAND-1, such that the outer macro can expand inner code if it wants to do it during its own macro expansion:
CL-USER 26 > (defmacro bar (a) `(* ,a ,a))
BAR
CL-USER 27 > (bar 10)
100
CL-USER 28 > (defmacro foo (a &environment e)
(let ((f (macroexpand a e)))
(print (list a '-> f))
`(+ ,(second f) ,(third f))))
FOO
CL-USER 29 > (foo (bar 10))
((bar 10) -> (* 10 10))
20
In above macro, if FOO would see only an expanded form, it could not print both the source and the expansion.
This works also with scoped macros. Here the BAR macro gets locally redefined and the MACROEXPAND generates different code inside FOO for the same form:
CL-USER 30 > (macrolet ((bar (a)
`(expt ,a ,a)))
(foo (bar 10)))
((bar 10) -> (EXPT 10 10))
20
If foo is a macro then (foo (bar)) must pass the raw syntax (bar) to the foo macro expander. This is absolutely essential.
This is because foo can give any meaning whatsoever to bar.
Consider the defmacro macro itself:
(defmacro foo (bar) body)
Here, the argument (bar) is a parameter list ("macro lambda list") and not a form (Common Lisp jargon for to-be-evaluated expression). It says that the macro shall have a single parameter called bar. Therefore it is nonsensically wrong to try to expand (bar) before handing it to defmacro's expander.
Only if we know that an expression is going to be evaluated is it legitimate to expand it as a macro. But we don't know that about an expression which is the argument to a macro.
Other counterexamples are easy to come up with. (defstruct point (x 0) (y 0)): (x 0) isn't a call to operator x, but a slot x whose default value is 0. (dolist (x list) ...): x is a variable to be stepped over list.
That said, there are implementation choices regarding the timing of macro expansion.
A Lisp implementation can macro-expand an entire top-level form before evaluating or compiling any of it. Or it can expand incrementally, so that for instance when (+ x y) is being processed, x is macro-expanded and evaluated or compiled into some intermediate form already before y is even looked at.
A pure syntax tree interpreter for Lisp which always keeps the code in the original form and always expands (and re-expands) the code as it is evaluating has certain interactivity advantages. Any macro that you rewrite goes instantly "live" in all the existing code that you have input into the REPL, like existing function definitions. It is obviously quite inefficient in terms of execution speed, but any code that you call uses the latest definition of your macros without any hassle of telling the system to reload that code to have it expanded again. That also eliminates the risk that you're testing something that is still based on the old, buggy version of some macro that you fixed. If you're ever writing a Lisp, the range of timing choices for expansion is good to keep in mind, so that you consciously reject the choices you don't go with.
In turn, that said, there are some constraints on the timing of macro expansion. Conceivably, a Lisp interpreter or compiler, when processing an entire file, could go through all the top level forms and expand all of them at once before processing any of them. The implementor will quickly learn that this is bad, because some of the later forms depend on the side effects of the earlier forms. Such as, oh, macros being defined! If the first form defines a macro, which the second one uses, then we cannot expand the second form without evaluating the effect of the first.
It makes sense, in a Lisp, to split up physical top-level forms into logical ones. Suppose that someone writes (or uses a macro to generate) codde like (progn (defmacro foo ...) (foo)). This entire progn cannot be macro expanded up-front before evaluation; it won't work! There has to be a rule such as "whenever a top-level form is based on the progn operator, then the children of the progn operator are considered top-level forms by all the processing which treats top-level forms specially, and this rule is recursively applied." The top-level entry point into the macro-expanding code walker then has to contain special case hacks to do this recognition of logical top-level forms, breaking them up and recursing into a lower level expander which doesn't do those checks any more.
I've been noticing in Rust that I want the macros to work this way.
I'd like to be able to wrap a bunch of declarations inside a macro
call so that the macro can then crawl the declarations and generate
reflection information.
It does sound like local-expand is the right tool for that job.
However, an alternative approach would be something like this:
Suppose that wrapper is our outer macro, and that the intended
syntax is:
(wrapper decl1 decl2 ...)
where decl is a declaration that potenteally uses some standard form declare.
We can let
(wrapper decl1 decl2 ...)
expand to
(let-syntax ([declare our-declare])
decl1 decl2 ...
(post-process-reflection-information))
where our-declare is a helper macro that expands both to the standard declaration as well as some form that stores the reflection information,
also post-process-reflection-information is another macro that
does any needed post processing.
I think you are trying to use macros for something they are not designed to solve. Macros are primarily a text/code substitution mechanism, and in the case of Lisp this looks a lot like a simplified term-rewriting system (see also How does term-rewriting based evaluation work?). There are different strategies possible for how to substitute a pattern of code, and in which order, but in C/C++ preprocessor macros, in LaTeX, and in Lisp, the process is typically done by computing the expansion until the form is no longer expandable, starting from the topmost terms. This order is quite natural and because it is distinct from normal evaluation rules, it can be used to implement things the normal evaluation rules cannot.
In your case, you are interested in getting access to all the declarations of some object/type, something which falls under the introspection/reflection category (as you said yourself). But implementing reflection/introspection with macros doesn't look totally doable, since macros work on abstract syntax trees and this might be a poor way to access the metadata you want.
Typically the compiler is going to parse/analyze the struct definitions and build the definitive, canonical representation of the struct, even if there are different way to express that syntactically; it may even use prior information not available directly as source code to compute more interesting metadata (e.g. if you had inheritance, there could be a set of properties inherited from a type defined in another module (I don't think this applies to Rust)).
I think currently Rust does not offer compile-time or runtime introspection facilities, which explains why are you going with the macro route. In Common Lisp macros are definitely not used for introspection, the actual values obtained after evaluation (at different times) is used to gain information about an object. For example, defclass expands as a set of instructions that register a class in the language, but in order to get all the slots of a class, you ask the language to give it to you, e.g:
(defclass foo () (x)) ;; define class foo with slot X
(defclass bar () (y)) ;; define class bar with slot Y
(defclass zot (foo bar) ()) ;; define class zot with foo and bar as superclasses
USER> (c2mop:class-slots (find-class 'zot))
(#<SB-MOP:STANDARD-EFFECTIVE-SLOT-DEFINITION X>
#<SB-MOP:STANDARD-EFFECTIVE-SLOT-DEFINITION Y>)
I don't know what the solution for your problem is, but in addition to the other answers, I think it is not specifically a fault of the macro system. If a macro is defined as done usually as only a term rewriting system, it will always have difficulties to perform some tasks on the semantic level. But Rust is still evolving so there might be better ways to do things in the future.
Are there any practical differences between special forms and macros? In what do they differ?
The terms aren't quite synonymous, but they aren't exclusive either (this answer assumes Scheme):
A special form (also known as a syntax in the Scheme Reports) is an expression that's not evaluated according to the default rule for function application. (The default rule, just to be explicit, is to eval all of the subexpressions, and then apply the result of the first one to the list of the results of the others.)
The macro system is a language feature that allows definition of new special forms within the language itself. A macro is a special form defined using the macro system.
So you could say that "special form" is a term that pertains to interface or semantics, whereas "macro" is a term that pertains to implementation. "Special form" means "these expressions are evaluated with a special rule," while "macro" means "here's an implementation of a special rule for evaluating some expressions."
Now one important thing is that most Scheme special forms can be defined as macros from a really small core of primitives: lambda, if and macros. A minimal Scheme implementation that provides only these can still implement the rest as macros; recent Scheme Reports have made that distinction by referring to such special forms as "library syntax" that can be defined in terms of macros. In practice, however, practical Scheme systems often implement a richer set of forms as primitives.
Semantically speaking, the only thing that matters about an expression is what rule is used to evaluate it, not how that rule is implemented. So in that sense, it's not important whether a special form is implemented as a macro or a primitive. But on the other hand, the implementation details of a Scheme system often "leak," so you may find yourself caring about it...
Lisp has certain language primitives, which make up Lisp forms:
literal data: numbers, strings, structures, ...
function calls, like (sin 2.1) or like ((lambda (a b) (+ a b 2)) 3 4)
special operators used in special forms. These are the primitive built-in language elements. See Special Operators in Common Lisp. These need to be implemented in the interpreter and compiler. Common Lisp provides no way for the developer to introduce new special operators or to provide your own version of these. A code parsing tool will need to understand these special operators; these tools are usually called 'code walkers' in the Lisp community. During the definition of the Common Lisp standard, it was made sure that the number is very small and that all extensions otherwise are done via new functions and new macros.
macros: macros are functions which are transforming source code. The transformation will happen recursively until no macro is left in the source code. Common Lisp has built-in macros and allows the user to write new ones.
So the most important practical difference between special forms and macros is this: special operators are built-in syntax and semantics. They can't be written by the developer. Macros can be written by the developer.
In contrast to special forms, macro forms can be macroexpanded:
CL-USER(1): (macroexpand '(with-slots (x y z)
foo
(format t "~&X = ~A" x)))
(LET ((#:G925 FOO))
(DECLARE (IGNORABLE #:G925))
(DECLARE (SB-PCL::%VARIABLE-REBINDING #:G925 FOO))
#:G925
(SYMBOL-MACROLET ((X (SLOT-VALUE #:G925 'X))
(Y (SLOT-VALUE #:G925 'Y))
(Z (SLOT-VALUE #:G925 'Z)))
(FORMAT T "~&X = ~A" X)))
T
For me the most practical difference has been in the debugger: Macros don't show up in the debugger; instead, the (typically) obscure code from the macro's expansion shows up in the debugger. It is a real pain to debug such code and a good reason to ensure your macros are rock solid before you start relying upon them.
the super short answer for the lazy
You can write your own macroes any time you want, though you can't add special forms without recompiling clojure.
Why is the function/macro dichotomy present in Common Lisp?
What are the logical problems in allowing the same name representing both a macro (taking precedence when found in function position in compile/eval) and a function (usable for example with mapcar)?
For example having second defined both as a macro and as a function would allow to use
(setf (second x) 42)
and
(mapcar #'second L)
without having to create any setf trickery.
Of course it's clear that macros can do more than functions and so the analogy cannot be complete (and I don't think of course that every macro shold also be a function) but why forbidding it by making both sharing a single namespace when it could be potentially useful?
I hope I'm not offending anyone, but I don't really find a "Why doing that?" response really pertinent... I'm looking for why this is a bad idea. Imposing an arbitrary limitation because no good use is known is IMO somewhat arrogant (sort of assumes perfect foresight).
Or are there practical problems in allowing it?
Macros and Functions are two very different things:
macros are using source (!!!) code and are generating new source (!!!) code
functions are parameterized blocks of code.
Now we can look at this from several angles, for example:
a) how do we design a language where functions and macros are clearly identifiable and are looking different in our source code, so we (the human) can easily see what is what?
or
b) how do we blend macros and functions in a way that the result is most useful and has the most useful rules controlling its behavior? For the user it should not make a difference to use a macro or a function.
We really need to convince ourselves that b) is the way to go and we would like to use a language where macros and functions usage looks the same and is working according to similar principles. Take ships and cars. They look different, their use case is mostly different, they transport people - should we now make sure that the traffic rules for them are mostly identical, should we make them different or should we design the rules for their special usage?
For functions we have problems like: defining a function, scope of functions, life-time of functions, passing functions around, returning functions, calling functions, shadowing of functions, extension of functions, removing the definition a function, compilation and interpretation of functions, ...
If we would make macros appear mostly similar to functions, we need to address most or all above issues for them.
In your example you mention a SETF form. SETF is a macro that analyses the enclosed form at macro expansion time and generates code for a setter. It has little to do with SECOND being a macro or not. Having SECOND being a macro would not help at all in this situation.
So, what is a problem example?
(defmacro foo (a b)
(if (and (numberp b) (zerop b))
a
`(- ,a ,b)))
(defun bar (x list)
(mapcar #'foo (list x x x x) '(1 2 3 4)))
Now what should that do? Intuitively it looks easy: map FOO over the lists. But it isn't. When Common Lisp was designed, I would guess, it was not clear what that should do and how it should work. If FOO is a function, then it was clear: Common Lisp took the ideas from Scheme behind lexically scoped first-class functions and integrated it into the language.
But first-class macros? After the design of Common Lisp a bunch of research went into this problem and investigated it. But at the time of Common Lisp's design, there was no wide-spread use of first-class macros and no experience with design approaches. Common Lisp is standardizing on what was known at the time and what the language users thought necessary to develop (the object-system CLOS is kind of novel, based on earlier experience with similar object-systems) software with. Common Lisp was not designed to have the theoretically most pleasing Lisp dialect - it was designed to have a powerful Lisp which allows the efficient implementation of software.
We could work around this and say, passing macros is not possible. The developer would have to provide a function under the same name, which we pass around.
But then (funcall #'foo 1 2) and (foo 1 2) would invoke different machineries? In the first case the function fooand in the second case we use the macro foo to generate code for us? Really? Do we (as human programmers) want this? I think not - it looks like it makes programming much more complicated.
From a pragmatic point of view: Macros and the mechanism behind it are already complicated enough that most programmers have difficulties dealing with it in real code. They make debugging and code understanding much harder for a human. On the surface a macro makes code easier to read, but the price is the need to understand the code expansion process and result.
Finding a way to further integrate macros into the language design is not an easy task.
readscheme.org has some pointers to Macro-related research wrt. Scheme: Macros
What about Common Lisp
Common Lisp provides functions which can be first-class (stored, passed around, ...) and lexically scoped naming for them (DEFUN, FLET, LABELS, FUNCTION, LAMBDA).
Common Lisp provides global macros (DEFMACRO) and local macros (MACROLET).
Common Lisp provides global compiler macros (DEFINE-COMPILER-MACRO).
With compiler macros it is possible to have a function or macro for a symbol AND a compiler macro. The Lisp system can decide to prefer the compiler macro over the macro or function. It can also ignore them entirely. This mechanism is mostly used for the user to program specific optimizations. Thus it does not solve any macro related problems, but provides a pragmatic way to program global optimizations.
I think that Common Lisp's two namespaces (functions and values), rather than three (macros, functions, and values), is a historical contingency.
Early Lisps (in the 1960s) represented functions and values in different ways: values as bindings on the runtime stack, and functions as properties attached to symbols in the symbol table. This difference in implementation led to the specification of two namespaces when Common Lisp was standardized in the 1980s. See Richard Gabriel's paper Technical Issues of Separation in Function Cells and Value Cells for an explanation of this decision.
Macros (and their ancestors, FEXPRs, functions which do not evaluate their arguments) were stored in many Lisp implementations in the symbol table, in the same way as functions. It would have been inconvenient for these implementations if a third namespace (for macros) had been specified, and would have caused backwards-compatibility problems for many programs.
See Kent Pitman's paper Special Forms in Lisp for more about the history of FEXPRs, macros and other special forms.
(Note: Kent Pitman's website is not working for me, so I've linked to the papers via archive.org.)
Because then the exact same name would represent two different objects, depending on the context. It makes the programme unnecessarily difficult to understand.
My TXR Lisp dialect allows a symbol to be simultaneously a macro and function. Moreover, certain special operators are also backed by functions.
I put a bit of thought into the design, and haven't run into any problems. It works very well and is conceptually clean.
Common Lisp is the way it is for historic reasons.
Here is a brief rundown of the system:
When a global macro is defined for symbol X with defmacro, the symbol X does not become fboundp. Rather, what becomes fboundp is the compound function name (macro X).
The name (macro X) is then known to symbol-function, trace and in other situations. (symbol-function '(macro X)) retrieves the two-argument expander function which takes the form and an environment.
It's possible to write a macro using (defun (macro X) (form env) ...).
There are no compiler macros; regular macros do the job of compiler macros.
A regular macro can return the unexpanded form to indicate that it's declining to expand. If a lexical macrolet declines to expand, the opportunity goes to a more lexically outer macrolet, and so on up to the global defmacro. If the global defmacro declines to expand, the form is considered expanded, and thus is necessarily either a function call or special form.
If we have both a function and macro called X, we can call the function definition using (call (fun X) ...) or (call 'X ...), or else using the Lisp-1-style dwim evaluator (dwim X ...) that is almost always used through its [] syntactic sugar as [X ...].
For a sort of completeness, the functions mboundp, mmakunbound and symbol-macro are provided, which are macro analogs of fboundp, fmakunbound and symbol-function.
The special operators or, and, if and some others have function definitions also, so that code like [mapcar or '(nil 2 t) '(1 0 3)] -> (1 2 t) is possible.
Example: apply constant folding to sqrt:
1> (sqrt 4.0)
2.0
2> (defmacro sqrt (x :env e :form f)
(if (constantp x e)
(sqrt x)
f))
** warning: (expr-2:1) defmacro: defining sqrt, which is also a built-in defun
sqrt
3> (sqrt 4.0)
2.0
4> (macroexpand '(sqrt 4.0))
2.0
5> (macroexpand '(sqrt x))
(sqrt x)
However, no, (set (second x) 42) is not implemented via a macro definition for second. That would not work very well. The main reason is that it would be too much of a burden. The programmer may want to have, for a given function, a macro definition which has nothing to do with implementing assignment semantics!
Moreover, if (second x) implements place semantics, what happens when it is not embedded in an assignment operation, such that the semantics is not required at all? Basically, to hit all the requirements would require concocting a scheme for writing macros whose complexity would equal or exceed that of existing logic for handling places.
TXR Lisp does, in fact, feature a special kind of macro called a "place macro". A form is only recognized as a place macro invocation when it is used as a place. However, place macros do not implement place semantics themselves; they just do a straightforward rewrite. Place macros must expand down to a form that is recognized as a place.
Example: specify that (foo x), when used as a place, behaves as (car x):
1> (define-place-macro foo (x) ^(car ,x))
foo
2> (macroexpand '(foo a)) ;; not a macro!
(foo a)
3> (macroexpand '(set (foo a) 42)) ;; just a place macro
(sys:rplaca a 42)
If foo expanded to something which is not a place, things would fail:
4> (define-place-macro foo (x) ^(bar ,x))
foo
5> (macroexpand '(foo a))
(foo a)
6> (macroexpand '(set (foo a) 42))
** (bar a) is not an assignable place
I've heard that Lisp's macro system is very powerful. However, I find it difficult to find some practical examples of what they can be used for; things that would be difficult to achieve without them.
Can anyone give some examples?
Source code transformations. All kinds. Examples:
New control flow statements: You need a WHILE statement? Your language doesn't have one? Why wait for the benevolent dictator to maybe add one next year. Write it yourself. In five minutes.
Shorter code: You need twenty class declarations that almost look identical - only a limited amount of places are different. Write a macro form that takes the differences as parameter and generates the source code for you. Want to change it later? Change the macro in one place.
Replacements in the source tree: You want to add code into the source tree? A variable really should be a function call? Wrap a macro around the code that 'walks' the source and changes the places where it finds the variable.
Postfix syntax: You want to write your code in postfix form? Use a macro that rewrites the code to the normal form (prefix in Lisp).
Compile-time effects: You need to run some code in the compiler environment to inform the development environment about definitions? Macros can generate code that runs at compile time.
Code simplifications/optimizations at compile-time: You want to simplify some code at compile time? Use a macro that does the simplification - that way you can shift work from runtime to compile time, based on the source forms.
Code generation from descriptions/configurations: You need to write a complex mix of classes. For example your window has a class, subpanes have classes, there are space constraints between panes, you have a command loop, a menu and a whole bunch of other things. Write a macro that captures the description of your window and its components and creates the classes and the commands that drive the application - from the description.
Syntax improvements: Some language syntax looks not very convenient? Write a macro that makes it more convenient for you, the application writer.
Domain specific languages: You need a language that is nearer to the domain of your application? Create the necessary language forms with a bunch of macros.
Meta-linguistic abstraction
The basic idea: everything that is on the linguistic level (new forms, new syntax, form transformations, simplification, IDE support, ...) can now be programmed by the developer piece by piece - no separate macro processing stage.
Pick any "code generation tool". Read their examples. That's what it can do.
Except you don't need to use a different programming language, put any macro-expansion code where the macro is used, run a separate command to build, or have extra text files sitting on your hard disk that are only of value to your compiler.
For example, I believe reading the Cog example should be enough to make any Lisp programmer cry.
Anything you'd normally want to have done in a pre-processor?
One macro I wrote, is for defining state-machines for driving game objects. It's easier to read the code (using the macro) than it is to read the generated code:
(def-ai ray-ai
(ground
(let* ((o (object))
(r (range o)))
(loop for p in *players*
if (line-of-sight-p o p r)
do (progn
(setf (target o) p)
(transit seek)))))
(seek
(let* ((o (object))
(target (target o))
(r (range o))
(losp (line-of-sight-p o target r)))
(when losp
(let ((dir (find-direction o target)))
(setf (movement o) (object-speed o dir))))
(unless losp
(transit ground)))))
Than it is to read:
(progn
(defclass ray-ai (ai) nil (:default-initargs :current 'ground))
(defmethod gen-act ((ai ray-ai) (state (eql 'ground)))
(macrolet ((transit (state)
(list 'setf (list 'current 'ai) (list 'quote state))))
(flet ((object ()
(object ai)))
(let* ((o (object)) (r (range o)))
(loop for p in *players*
if (line-of-sight-p o p r)
do (progn (setf (target o) p) (transit seek)))))))
(defmethod gen-act ((ai ray-ai) (state (eql 'seek)))
(macrolet ((transit (state)
(list 'setf (list 'current 'ai) (list 'quote state))))
(flet ((object ()
(object ai)))
(let* ((o (object))
(target (target o))
(r (range o))
(losp (line-of-sight-p o target r)))
(when losp
(let ((dir (find-direction o target)))
(setf (movement o) (object-speed o dir))))
(unless losp (transit ground)))))))
By encapsulating the whole state-machine generation in a macro, I can also ensure that I only refer to defined states and warn if that is not the case.
With macros you can define your own syntax, thus you extend Lisp and make it
suited for the programs you write.
Check out the, very good, online book Practical Common Lisp, for practical examples.
7. Macros: Standard Control Constructs
8. Macros: Defining Your Own
Besides extending the language's syntax to allow you to express yourself more clearly, it also gives you control over evaluation. Try writing your own if in your language of choice so that you can actually write my_if something my_then print "success" my_else print "failure" and not have both print statements get evaluated. In any strict language without a sufficiently powerful macro system, this is impossible. No Common Lisp programmers would find the task too challenging, though. Ditto for for-loops, foreach loops, etc. You can't express these things in C because they require special evaluation semantics (people actually tried to introduce foreach into Objective-C, but it didn't work well), but they are almost trivial in Common Lisp because of its macros.
R, the standard statistics programming language, has macros (R manual, chapter 6). You can use this to implement the function lm(), which analyzes data based on a model that you specify as code.
Here's how it works: lm(Y ~ aX + b, data) will try to find a and b parameters that best fit your data. The cool part is, you can substitute any linear equation for aX + b and it will still work. It's a brilliant feature to make statistics computation easier, and it only works so elegantly because lm() can analyze the equation it's given, which is exactly what Lisp macros do.
Just a guess -- Domain Specific Languages.
Macros are essential in providing access to language features. For instance, in TXR Lisp, I have a single function called sys:capture-cont for capturing a delimited continuation. But this is awkward to use by itself. So there are macros wrapped around it, such as suspend, or obtain and yield which provide alternative models for resumable, suspended execution. They are implemented here.
Another example is the complex macro defstruct which provides syntax for defining a structure type. It compiles its arguments into lambda-s and other material which is passed to the function make-struct-type. If programs used make-struct-type directly for defining OOP structures, they would be ugly:
1> (macroexpand '(defstruct foo bar x y (z 9) (:init (self) (setf self.x 42))))
(sys:make-struct-type 'foo 'bar '()
'(x y z) ()
(lambda (#:g0101)
(let ((#:g0102 (struct-type #:g0101)))
(unless (static-slot-p #:g0102 'z)
(slotset #:g0101 'z
9)))
(let ((self #:g0101))
(setf (qref self x)
42)))
())
Yikes! There is a lot going on that has to be right. For instance, we don't just stick a 9 into slot z because (due to inheritance) we could actually be the base structure of a derived structure, and in the derived structure, z could be a static slot (shared by instances). We would be clobbering the value set up for z in the derived class.
In ANSI Common Lisp, a nice example of a macro is loop, which provides an entire sub-language for parallel iteration. A single loop invocation can express an entire complicated algorithm.
Macros let us think independently about the syntax we would like in a language feature, and the underlying functions or special operators required to implement it. Whatever choices we make in these two, macros will bridge them for us. I don't have to worry that make-struct is ugly to use, so I can focus on the technical aspects; I know that the macro can look the same regardless of how I make various trade-offs. I made the design decision that all struct initialization is going to be done by some functions registered to the type. Okay, that means that my macro has to take all the initializations in the slot-defining syntax, and compile the anonymous functions, where the slot initialization is done by code generated in the bodies.
Macros are compilers for bits of syntax, for which functions and special operators are the target language.
Sometimes people (non-Lisp people, usually) criticize macros in this way: macros don't add any capabilities, only syntactic sugar.
Firstly, syntactic sugar is a capability.
Secondly, you also have to consider macros from a "total hacker perspective": combining macros with implementation-level work. If I'm adding features to a Lisp dialect, such as structures or continuations, I am actually extending the power. The involvement of macros in that enterprise is essential. Even though macros aren't the source of the new power (it doesn't emanate from the macros themselves), they help tame and harness it, giving it expression.
If you don't have sys:capture-cont, you can't just hack up its behavior with a suspend macro. But if you don't have macros, then you have to do something awfully inconvenient to provide access to a new feature that isn't a library function, namely hard-coding some new phrase structure rules into a parser.