My setup
HoloLens
Windows 10 October 2018 Update (10.0.17763.134)
Desktop
Windows 10 Enterprise
Visual Studio Community 2017 Version
Unity 2018.2.19f1 (Latest 7th December 2018 Update)
The Problem
I am unable to deploy any application to the HoloLens, but able to deploy it on hololens-emulator. I'm attempting with the Origami application exported from Unity as in the tutorial.I always get the same error "
DEP6953: Failed to launch remote debugger with the following error:
'Command failed: 0x80070020'
I'm at a loss for what else to try, or what setting I've missed. I've reset the HoloLens several times and reinstalled Visual Studio only to get the same thing.
I have already tried the solution mentioned on Windows Mixed Reality Developer Forum https://forums.hololens.com/discussion/7361/deployment-error-dep6953 but it didn't work for me.
For whom it may be usefull.
I got this error deploying and debugging windows iot on a raspberry pi.
I fixed this by changing the authentication mode to 'none'. then deployment succeeded.
It could be anything. You need to investigate the Hololens logs. Open "Windows Device Portal"/System/Logging.
Then you need to select some providers with severity by choosing them in box and clicking "Enable". I usually begin from "Microsoft-Windows-WinRT-Error" ETW provider.
DO NOT CLOSE THE LOGGING PAGE!!!!!
Start the debugger with app, see the error and go to Logging page. Try to find out the root of issue.
Related
I've been working in a Unity app with Hololens emulator in Visual Studio 2017 in Windows Pro, and it was working great until last night where I started to get the following issue every time that I try to deploy my application into the Hololens emulator:
Error DEP6957 : Failed to connect to device '[device_ip]' using Universal Authentication. Please verify the correct remote authentication mode is specified in the project debug settings.
I've tried to do the following things without success:
Clean/rebuild solution
Checked 'uninstall/install' checkbox in the UWP project settings
Deleted Hololens virtual machine
Uncheck/check Hyper-v feature (and restart PC after each try)
Restarted computer
No luck. Sometimes, I am able to make it work, but after 30 seconds to 1 minute, the hololens emulator gets frozen and then it closes itself; again, this was working fine until last night, and I have not installed anything different, unless an automatic windows update did something. This happens with all the applications, and they run just fine in the Unity player.
I would appreciate your help on this, I just don't think the only solution is to uninstall/install Visual studio and all its components, it makes no sense, since everything was ok.
Thank you.
UPDATE
I've just noticed that if I connect the laptop to the internet by using an ethernet cable, it works, it only fails in WIFI, have you seen that before? I also have another UWP that I deploy remotely to a raspberry and it also works only with ethernet, but both of them were used to work in wifi? any idea?
My setup
HoloLens
Windows 10 October 2018 Update (10.0.17763.134)
Desktop
Windows 10 Enterprise
Visual Studio Community 2017 Version
Unity 2018.2.19f1 (Latest 7th December 2018 Update)
The Problem
I am unable to deploy any application to the HoloLens, but able to deploy it on hololens-emulator. I'm attempting with the Origami application exported from Unity as in the tutorial. I'm able to pair with the HoloLens easily and I have developer mode on. Visual Studio also does auto-detect the device as a remote machine. But when I attempt to deploy it, I always get the same "DEP0100" error, that the device is not in developer mode though the device is already in a developer mode. I'm at a loss for what else to try, or what setting I've missed. I've reset the HoloLens several times and reinstalled Visual Studio only to get the same thing.
I have already tried the solution mentioned here Unable to deploy HoloLens application but it didn't work for me.
It is not clear what you got. But I have couple ideas:
You connected to HL as Remote Machine, but HL is Device.
You built an appx as x64, but HL is x86.
You didn't install a proper runtime, debug or release.
You use older SDK than HL platform version.
You minimal target platform is higher then HL platform version.
Maybe something else. You need to investigate the Hololens logs. Open "Windows Device Portal"/System/Logging.
Then you need to select some providers with severity by choosing them in box and clicking "Enable". I usually begin from "Microsoft-Windows-WinRT-Error" ETW provider.
DO NOT CLOSE THE LOGGING PAGE!!!!!
Start the debugger with app, see the error and go to Logging page. Try to find out the root of issue.
I've read every StackOverflow that I could find on this issue, but I still can't work it out.
I'm trying to deploy an app to actual device (NOT emulator). But I receive the following error when i try to build:
Severity Code Description Project File Line
Error Error : DEP6100 : The following unexpected error occurred during bootstrapping stage 'Connecting to the device '30F105C9-681E-420b-A277-7C086EAD8A4E'.':
SEHException - External component has thrown an exception. App1
and
Severity Code Description Project File Line
Error Error : DEP6200 : Bootstrapping 'Device' failed. Device cannot be found. App1
It's worth mentioning that I went from Windows 7 to Windows 10. It's also worth mentioning that my computer was missing the IpOverUsbSvc.exe (not just the registry post, but the actual service was missing). Couldn't find any way to get this back so, so my colleague sent over the .exe and the DLLs and I placed it in it's location. And the service is now running and no longer gives any errors. My device is recognized by the PC, it's running Windows 10 Mobile (but I've also tried with a device running Windows 8.1).
Specs on PC:
Windows 10 Pro (Build 10240)
Using Visual Studio 2015
UWP Tools
Any suggestions to fix my nightmare? Thanks!
Steps that helped me. I have windows 10 mobile build 10581 (and now 10586) installed on phone
Turn off Developer mode on your phone.
Deploy app (UWP or SL) by VS2015 -> Error.
Turn on Developer mode on your phone.
Deploy app (UWP or SL) by VS2015 -> Working.
If you change another device or re-connect you must close VS2015, re-launch and do again!
Finally managed to find a solution to this illusive bug.
It seems that if I didn't have the Windows Phone 8.1 Tools installed I couldn't build to an ARM device (not even Windows 10 Mobile).
So my step to solve this was:
Go to Control Panel -> Programs and Features -> Microsoft Visual Studio ... 2015 -> Modify. And then select the Windows Phone 8.1 Tools.
Pretty pissed that one can't get a reasonable error message when things like this is missing.
I had this issue after updating my device to win10 ver:10.0.10581.0. I tried many things but finally after installing latest sdk and emulators i got it working. You may try installing from this page sdk and emulator:
https://dev.windows.com/en-us/downloads/windows-10-developer-preview
Somehow the new emulators were not visible in vs, they got visible after few restarts and then on device debugging started to work.
But one problem still remain from me that vs crashes after ending debug session with device.
desktop-->my computer--> right click--> management--> service--> start the service Windows Phone IP over USB Transport (IpOverUsbSvc) although maybe the starttype is set as automatic
Seems like there are many issues causing the same error message.
This one worked for me Windows Phone deploy Issue
Essentially you need to remove/uninstall the device from Windows. Then after unplugging and plugging back in, the device and drivers are reinstalled.
I tried many of the suggested solutions to no avail.
After changing the USB-C cable from a USB 3.1 port to a USB 2.0 port on my computer, the error goes away. YMMV
I see it is quite an old post...but I still get this problem. In my case, this happened after I deployed to a second phone I had for testing. After that, VS 2017 now only wants to deploy to that phone and not to the other phone no more. If I start another project, the other phone is recognized and deployable to (listed as device under debug).
Restarting system fixes this...
Also, if I add another project as reference (like a background task) to my project, I will loose the ability to select the devices and emulators under debug. VS 2017 simply then seems to deploy to the last device selected...(really no clue what this is). I have not been able to get the selection of emulators and devices back yet on this one. I only will have the "Start" and "Download new emulators" options. I think this has to do with the fact that VS maybe doesn't know the type (like arm/86/64) of the reference project because it is not set (not needed as this defies the purpose of referencing a project for dynamic references and not the compiled device specific file...)
Hope it helps someone ....
I uninstalled the existing version of the app in device and re-ran it and it worked for me
I got that error for a really simple reason...just opened a new solution I downloaded from GitHub, pressed F5, and got it!
I had left my build configuration in the default "Debug - ARM" setting, when I changed to "Debug - x64" it worked fine!
(Just adding another reason for completeness, not likely to affect your case!)
In case it's helpful for others... I got: DEP6701 bootstrapping failed ... access denied.
Thanks to comments here, I only dev-locked then dev-unlocked my phone (was originally dev-unlocked). Totally works now (took some time installing missing frameworks at first). All good.
Thanks
One more thing could be tried.
Uninstall the existing app if any and then deploy from Visual Studio.
Try on another usb port. It worked
I have a problem with the Visual Studio 2015 RC Emulator for Android. The emulator is not starting when I'm starting debugging (F5) nor from "Tools > Visual Studio Emulator for Android...". The process is stuck on "Preparing virtual machine" and there is a "Xde.exe" process with 0% CPU usage in Task Manager. This happens for all virtual machines. Previous emulators (pre-RC) were working just fine.
The necessery APIs (19 and 21) are installed according to SDK manager.
I have tried re-installing Visual Studio and also repairing it but it didn't help.
How can I fix that?
Update:
Here are logs: http://pastebin.com/xgyTNkJ9 . The [Critical] The operation was canceled. lines are self explenatory. [Critical] Could not launch 'VS Emulator 5.5" KitKat (4.4) HDPI Phone' device.occured when I killed xde.exe in Task manager.
What's weird is a fact that when I import VHD file from %localappdata%\Microsoft\VisualStudioEmulator\Android\Containers\Local\Devices into Hyper-V manager it works just fine and I can even start it and use it. Unfortunately, I still can't debug application from Visual Studio that way.
Update 2:
So I've reinstalled the Windows on my notebook and same thing happens after installing Visual Studio 2015 RC. So two different hardware, one clean Windows installation and same effect.
This might be a duplicate of Visual studio (2015) emulator for android not working - XDE.exe - Exit Code 3.
I was having the same issue as yourself and this was solved by following the steps provided in this answer: https://stackoverflow.com/a/31698124/1010492.
The key for me was to disable the Network Sharing I had set on my Wi-fi adapter.
You are probably not a member of the Hyper-V Admins group on the computer. Do this:
Open Control Panel > Administrative Tools > Computer Management.
Expand "Local Users and Groups" and then click on "Groups."
Double click on "Hyper-V Administrators" group.
Click "Add" and add your username to the group.
If the group doesn't exist, you can create it using the PowerShell script in this blog post: http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/09/28/creating-a-hyper-v-administrators-local-group-through-powershell.aspx
It may be that you do not have enough memory available to start the Hyper-V VM. If you go to Hyper-V Manager and attempt to start the emulator image, you'll be able to see if it starts at all or if you don't have enough free RAM on the machine.
I came up with a very genuine solution that can fulfill your basic need of running the emulator. All you need to do is follow these steps:
Sign in to https://www.genymotion.com/account/login/
Download Genymotion from there.
First Download and run the Emulator of your own choice from Genymotion.
[Start the Emulator From Start Button][2]
Then Keep it running and Open the Visual Studio.
Open your Solution,and while your Genymotion Emulator Running,You will see that at Play option,you will be having new Emulator device which will be Genymotion Device.
Deploy using that device.
Hurray!! Your Solution is Successful.
I tried to run the directx samples from ..\Windows Mobile 6 SDK\Samples\PocketPC\CPP\win32\directx\d3dm\tutorials on a Samsung Omnia and on the emulator and it doesn't work because of a deployment error.
I am using Microsoft Visual Studio 2008 and have installed Windows Mobile SDK Standard and Professional refresh.
The device is correctly plugged in and set up for active sync (I know this because other samples work, also a creating Win32 smart device application and running it works).
When I try to run a directx sample application it compiles without errors but the message:
" There were deployment errors, Continue? Yes/No" appears
If I manually copy the application from the debug folder to the device and run it from there, it works.
The same deployment error message appears if I try it on an emulator. Other applications are deploying successfully.
Is there any way to make the deployment work? Maybe there is an obscure option I need to set...
What I do is:
Connect the Mobile device to the PC,
Open Visual Studio 2008,
Open a directx sample project,
Click Run (in Debug or Release mode).
The problem with the deployment is that the file msvcr80.dll could not be found.
It was specified at the deployment options as an additional file "Project->Properties->Configuration Properties->Deployment" then "General->Additional files"
with the paths msvcr80.dll|$(BINDIR)\$(INSTRUCTIONSET)\|%CSIDL_WINDOWS%|0;
Removing it makes the deployment successful. I have only tested this on a Windows Mobile 6.1 device and with the D3DM reference driver on an WM6.1/WM6 emulator.
What I haven't figured out is where does $(BINDIR)\$(INSTRUCTIONSET) point to.
Also I don't know why msvcr80.dll is in the addition files if it is not actually needed.
Is there actually a msvcr80.dll compiled for Windows Mobile platform on an ARM cpu?
I was able to resolve this issue after doing some low-level Sysinternals Debugging. It was trying to deploy NETCFv35.Messages.EN.cab to the device and in my case it was deleted for some reason. Re-installing .NET CF fixed the issue for me. Wish VS 2008 said what file was missing instead of a generic message. Hope this helps you too.