I have exported a list of 270 user accounts from O365, all my shared mailboxes, what I want to do is pull the department field of each of those accounts.
But the output from cmdlet Get-Mailbox which I used to get my sharedlist.csv doesn't include the department information.
I know AzureADUser does, so, I am trying to loop through the sharedlist.csv and pull the displayname, UPN, and Department for each addresses listed in the sharedlist.csv
What I'm trying to figure out is how to have Get-AzureADUser pull only the information on the users I have listed in my CSV file.
Here is the command that I have so far:
Import-Csv 'C:\PowerShell Scripts\sharedlist.csv' | ForEach {Get-AzureADUser -All $True | Select-Object DisplayName,UserPrincipalName,Department}
This is obviously not working for what I'm trying to do. It outputs in the format I want and shows the data, but it is pulling every Azure Ad User and then looping over and over. If someone can point me to the proper syntax needed to get this job done I'd appreciate it.
TIA
As Lee_Daily already explained in his comment, you are using the Get-AzureADUser cmdlet without any parameter, so it returns info about any user, not only the ones you have defined in the CSV file.
If your file (I peeked in the original question) looks like this:
"UserPrincipalName"
"user1#domain.com"
"user2#domain.com"
"user270#domain.com"
Then this should work for you:
$data = Import-Csv 'C:\PowerShell Scripts\sharedlist.csv'
$data | ForEach-Object {
Get-AzureADUser -ObjectId $_.UserPrincipalName | Select-Object DisplayName,UserPrincipalName,Department
}
Related
very new to heavier powershell and I've been hacking at this all day and can't figure it out.
I need to get a list of UPNs from office 365 accounts. I have the names in a CSV file. It has one column, with a long list of names. Heading is "name"
I want to run the get-user command against every name with the pipe format-list name, universalprincipalname and then output it to a new file.
I tried this:
get-content "m:\filename.csv" |
foreach {get-user '$_.user' -identity -resultsize unlimited} |
format-list name, userprincipalname |
out-file -FilePath m:\newfilename.csv
But it did not work (I also tried it with import-csv). It seemed to instead of pulling from my list, pull right from the office365 exchange server and when it finally finished had way more names in it than I have in my list.
My overall goal is to generate a list of upns of all the people who do not have mobile devices with their account so I can use a powershell command to disable active sync and OWA for mobile devices. Unfortunately, the command I used to generate my list of users produced the list in first name, last name format...and we have so many users I can't just concatenate the thing in excel, because there would be a ton of mistakes.
CSV is laid out like this:
Column1
name
first last
first last
first last
first last
Assuming the CSV's header is Name, the code should look like this:
Import-Csv "m:\filename.csv" | ForEach-Object {
Get-User -Identity $_.Name.Trim() -ResultSize Unlimited
} | Select-Object Name, UserPrincipalName |
Export-Csv "m:\newfilename.csv" -NoTypeInformation
Note that I'm using Select-Object instead of Format-Table. You should only use Format-Table to display your output to the PowerShell host, objects passed through the pipeline to this cmdlet will be recreated into a new object of the type FormatEntryData which you do not want if your intent is to export the data.
I am trying to get a list of all the subfolders for a list of users from importing a CSV. Here is the code I have:
Import-Csv "C:\Users\177626\Desktop\Calendar.csv" | foreach {Get-MailboxFolder -identity "$($_.CalendarUsers):\Calendar" -GetChildren}
$_.CalendarUsers is what I am using as the column in the CSV for the user email addresses.
The issue is whenever I run the script, it reads the first users but then tell me any user after that, that the mailbox does not exist. See attached:
Any help would be much appreciated to figure this out...also, is it possible to also list the User's Name and PrimarySMTP from the output of this script?
Thanks!
Please check if all the mailboxes and the calendars in the .csv file are provisioned.
Import-Csv "C:\Users\177626\Desktop\Calendar.csv" | foreach {Get-Mailbox -identity $_.CalendarUsers}
Import-Csv "C:\Users\177626\Desktop\Calendar.csv" | foreach {Get-MailboxCalendarFolder -Identity "$($_.CalendarUsers):\Calendar"}
ref: https://learn.microsoft.com/en-us/powershell/module/exchange/get-mailboxcalendarfolder?view=exchange-ps
I am attempting to run a script against our AD that spits out the AD Users in a group, for all the groups in a list. Essentially attempting to audit the groups to find the users. I have a functioning script, except I have no way to determine when the output of one group ends, and where the output of the next begins.
I have tried looking for previous examples, but nothing fits exactly the method I am using, and with me just dipping my toes into powershell I have not been able to combine other examples with my own.
$groups = Get-Content "C:\Folder\File_with_lines_of_ADGroup_Names.txt"
foreach ($group in $groups) { Get-ADGroupMember -Identity "$group" | Where-Object { $_.ObjectClass -eq "user" } | Get-ADUser -Property Description,DisplayName | Select Name,DisplayName,Description,$group | Export-csv -append -force -path "C:\Folder\File_of_outputs.csv" -NoTypeInformation }
Right now the problem lies with getting the $group variable to be exported along with the Name, DisplayName, and Description of each user returned. This is the best way I can think of to tag each user's group and keep all the results in a single file. However, only the first line of results works which is the HEADERS of the CSV, and everything after it is either listed as "Microsoft.ActiveDirectory.Management.ADPropertyValueCollection"or simply blank after the first group of results.
Hoping someone can show me how to easily add my variable $group to the output for each user found for filtering/pivoting purposes.
Thanks and let me know if you have questions.
I believe what you are after are calculated properties on your select statement.
Select Name,DisplayName,Description,$group
Should Probably be something like
Select Name,DisplayName,Description,#{n='Group'; e={$group};}
See also https://serverfault.com/questions/890559/powershell-calculated-properties-for-multiple-values
I would like to write a PS script that exports a .csv for all users that are specified in a separate .txt file. So, for instance, I could create a text file that has
Timmy Turner
Silly Sally
Then, when the script is ran, it searches AD for those two users and exports a CSV with their first name, last name, and email address.
I originally got hung up a bit on how the "Get-ADUser" filter worked, but I produced something semi-usable. However, what I've come up with just asks who you are searching for and then uses that. I think it would be much easier to just have it reference a pre-made text file, especially when searching for a large number of users. Or, there may be an even easier way to do this that I am not thinking of. Here is what I currently have:
$SamAc = Read-Host 'What is the first and last name of the person you would like to search for?'
$filter = "sAmAccountname -eq ""$SamAc"""
Get-ADUser -Filter $filter -Properties FirstName, LastName, EmailAddress | select FirstName, LastName, EmailAddress | Export-CSV "C:\Scripts\PS_ADQuery\Email_Addresses.csv"
I feel like the "Get-Content" cmdlet is close to what I am looking for, but I can't seem to get it to function correctly. I may be going in the totally wrong direction, though.
I found the answer. It turns out I even had the AD properties totally wrong. Take my comments with a grain of salt since I may not fully understand the processes behind each line of code, but this does exactly what I was looking to do.
#creates a $users variable for each username listed in the users.txt file. the ForEach
#command allows you to loop through each item in the users.txt array. the scriptblock
#nested into the ForEach command queries each username for specific properties.
$users = ForEach ($user in $(Get-Content C:\Scripts\PS_ADQuery\users.txt)) {
Get-AdUser $user -Properties GivenName,sn,mail
}
#takes the $users variable defined by the ForEach command and exports listed properties
#to a csv format.
$users |
Select-Object GivenName,sn,mail |
Export-CSV -Path C:\Scripts\PS_ADQuery\output.csv -NoTypeInformation
I am using ActiveRoles Management Shell under Windows XP , Powershell ver 2 for retreiving Group data from AD and exporting it to csv file.Everything works well apart from getting member list it is so long that the program is writing in excel cells under member column System.String[] each time.How can I make it write whole list there , is it possible ? I could actually have only the name of the member don't need whole connection path.Is there a possibility to get from group field member only name ?
get-QADGroup -SearchRoot 'ou=User,ou=Groups,ou=PL,dc=test,dc=com'| Select-Object -property name,sAMAccountName,description,groupType,member|Export-Csv -path Y:\csv\groups.csv
Ok, as Matt suggested you want an expression in your Select statement. I would use something like this:
#{l="Members";e={$_.Members -join ", "}}
Which when inserted into your one-liner looks like:
get-QADGroup -SearchRoot 'ou=User,ou=Groups,ou=PL,dc=test,dc=com'| Select-Object -property name,sAMAccountName,description,groupType,#{l='Members';e={$_.member -join ", "}}|Export-Csv -path Y:\csv\groups.csv -NoTypeInfo
I also added -NoTypeInfo to the export to skip the annoying lead line telling you it's a PSCustomObject or some such and actually just get your data (and headers).
I don't have access to the quest cmdlets so I will provide a solution based on cmdlets from the activedirectory
Get-ADUser -Filter * -SearchBase "OU=Employees,DC=Domain,DC=Local" -Properties memberof |
Select-Object name,#{Name="Groups";Expression={$_.MemberOf |
ForEach-Object{(Get-ADGroup -Identity $_).Name + ";"}}} |
Export-Csv C:\temp\TEST.CSV -Append
To make sense of this by line:
Should be self explanatory. Get all users in the OU defined. You would need to change this to suit your needs.
The select statement appears normal until you reach the calculated property Groups.
What continues from the previous line is cycling through every group that an individual user is a memberof and get the friendly name of the group (MemberOf returns DistinguishedName's). At the end of every group add a ";" as to not interfere with the CSV that will be made later.
Append to a csv file.
For brevity I didnt include all the extra properties that you included in your Select-Object statement. You would obviously need to add those back as the need fits.
Since you have the use the Quest cmdlets you could just change member in your select statement to the following:
#{Name="Groups";Expression={$_.member | ForEach-Object{"$_;"}}}
I cannot test if this will work. It is based on the assumption that member contains a simple name as supposed to a distinguishedname