I'm trying to create my own key shortcut to act as the arrow keys in Visual Studio Code.
When I hit "ctrl-p" it pops up a window that I can navigate. However, when I use my special keybinding, which I've set as
{
"key": "alt+i",
"command": "cursorUp",
"when": "textInputFocus"
}
it does not move up to the next option like pressing the up arrow does.
I'm guessing this is due to having either the wrong command or the wrong "when" for getting the keymap to trigger when that window is open.
Normally in Atom I'd just use the key-binding-resolver, but Visual Studio Code doesn't appear to have that yet.
What is the correct command and "when" to navigate through the panels such as the "ctrl-p" panel in Visual Studio Code?
When you click Ctrl-P you are in the file picker, so you need a command that then moves up and down the filepicker. It took a bit because I thought just searching for the UpArrow bindings would make it obvious. But it did not.
Looking again at what Ctrl-P is bound to revealed another command also bound to Ctrl-P : workbench.action.quickOpenNavigateNextInFilePicker so try:
{
"key": "alt+i",
"command": "workbench.action.quickOpenNavigateNextInFilePicker",
"when": "inFilesPicker && inQuickOpen"
},
{
"key": "ctrl+p",
"command": "-workbench.action.quickOpenNavigateNextInFilePicker",
"when": "inFilesPicker && inQuickOpen"
},
{
"key": "alt+j",
"command": "workbench.action.quickOpenNavigatePreviousInFilePicker",
"when": "inFilesPicker && inQuickOpen"
},
{
"key": "ctrl+shift+p",
"command": "-workbench.action.quickOpenNavigatePreviousInFilePicker",
"when": "inFilesPicker && inQuickOpen"
}
Now choosing Alt-I and Alt-J just happens to avoid the usual Alt key trigger of the menu bar opening items, like Alt-D will open the Debug menu. If you have a conflicting Alt-Something that you wanted to use, you can disable the menu bar Alt behavior with:
// If enabled, the main menus can be opened via Alt-key shortcuts. Disabling mnemonics allows to bind these Alt-key shortcuts to editor commands instead.
"window.enableMenuBarMnemonics": false
I'm looking to switch between terminals open in visual studio code.
With this "Switch focus between editor and integrated terminal in Visual Studio Code" question I correctly setup the focus, but I would like to switch between terminals, not only from code to terminal.
Is there a way to do it?
Go to File → Preferences → Keyboard Shortcuts or just press Ctrl + k + Ctrl + s.
Then click the icon in upper right corner, it opens keybindings.json file:
Try adding the following two entries to this file:
{
"key": "ctrl+pagedown",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
},
{
"key": "ctrl+pageup",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus"
}
Note: On Mac change ctrl to cmd
As of Release 1.56.0, there is inbuilt support for switching terminals in VS Code:
New keybindings
The terminal has several new default keybindings this release:
Move to previous terminal - Ctrl+PageUp (macOS Cmd+Shift+])
Move to next terminal - Ctrl+PageDown (macOS Cmd+shift+[)
Focus terminal tabs view - Ctrl+Shift+\ (macOS Cmd+Shift+\) - Terminal tabs preview
As always, these default keybindings can be removed or custom
keybindings can be added via the keybindings system.
Looking deeply I found it:
{
"key": "shift+cmd+]",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
}
:)
alt + up/down left/right arrows to switch between splitted terminals.
If alt unfocuses your terminal and focuses the menu, add this to the settings file
// settings.json
"window.titleBarStyle": "custom",
"window.customMenuBarAltFocus": false
Improving on #Serhii Popov's answer
Use up and down instead of pageup and pagedown
Go to File → Preferences → Keyboard Shortcuts or just press Ctrl + k + Ctrl + s.
Then click the icon in upper right corner to open the keybindings.json file:
Then add the objects below to the array in the file:
[
...
{
"key": "ctrl+down",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
},
{
"key": "ctrl+up",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus"
}
...
]
Note: On Mac change ctrl to cmd
On Windows
to switch terminal ctrl + ~
to switch back to code editor ctrl + 1
On Windows 10 (not sure about Linux and Mac):
To switch between split terminal windows in Visual Studio Code use
Alt + Right arrow / Left arrow
I believe the answer you are looking for is Cmd+Shift+[ (and Cmd+Shift+])
Ctrl+J can toggle(show/hide) the console.
Here is my approach, which provides a consistent way of navigating between active terminals as well as jumping between the terminal and editor panes. You can try adding this to your keybindings.json directly but I would recommend you go through the keybinding UI (cmd+K cmd+S on a Mac) so you can review/manage conflicts etc.
With this I can use ctrl+x <arrow direction> to navigate to any visible editor or terminal. Once the cursor is in the terminal section you can use ctrl+x ctrl+up or ctrl+x ctrl+down to cycle through the active terminals (note that moving between on-screen split terminals is done with ctrl+x left or ctrl+x right).
cmd-J is still used to hide/show the terminal pane.
{
"key": "ctrl+x right",
"command": "workbench.action.terminal.focusNextPane",
"when": "terminalFocus"
},
{
"key": "ctrl+x left",
"command": "workbench.action.terminal.focusPreviousPane",
"when": "terminalFocus"
},
{
"key": "ctrl+x ctrl+down",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
},
{
"key": "ctrl+x ctrl+up",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus"
},
{
"key": "ctrl+x up",
"command": "workbench.action.navigateUp"
},
{
"key": "ctrl+x down",
"command": "workbench.action.navigateDown"
},
{
"key": "ctrl+x left",
"command": "workbench.action.navigateLeft",
"when": "!terminalFocus"
},
{
"key": "ctrl+x right",
"command": "workbench.action.navigateRight",
"when": "!terminalFocus"
},
This is a work in progress as I'm trying to mimic my emacs behavior in VS Code, but some key elements are missing, like being able to navigate to a terminal buffer by name (without using a mouse/dropdown). Overall I'm pretty surprised by the poor editor group/pane navigation UX in an otherwise amazing product, but working on getting used to it.
I've got Ctrl+PageDown/Ctrl+PageUp in my IDE Keyboard Shortcut settings, which I believe is the default as I didn't change them.
To figure out the shortcuts on your machine, go to File>Preferences>Keyboard Shortcuts and in the search box paste workbench.action.terminal.focusNext or workbench.action.terminal.focusPrevious
This would only switch between terminal groups. So if 2 terminals were in the same group (that is there were split to display side-by-side), it wouldn't switch between those. To switch between terminals in the same group, use "Alt+LeftArrow" or "Alt+RightArrow".
Credits to #Victory Ifebhor for the side-by-side case, clarified in the comments.
Pay attention to the the VS Code concept of Group, as that can trip you up when reading some of the answers here.
i.e there are different default shortcuts to switch between terminals in the same group (CMD+OPT+up/down) or between different terminal groups (SHIFT+CMD+[ / ])
You can set up an easy custom keyboard shortcut in Vs Code for this
You can Ctrl-P and type Keyboard Shortcuts
search for "Terminal: switch active terminal"
set any key combination you want, mine is Ctrl+K since it wasn't used
Now you can switch to focus on the sidebar terminal without using your mouse but if you just want to switch to the main terminal Ctrl+J
I have been trying to find the same shortcut, I found with VS code what helps is to know how the different UI components and actions are called.
In this case once "Keyboard Shortcuts" tab (where you can view and customize shortcuts) is open search for "prev terminal group" or "next terminal group".
We can see that VS Code has default shortcuts for:
Terminal: Focus Previous Terminal Group
Terminal: Focus Previous Terminal in Terminal Group
See results for my search:
I am not sure which one you are the most interested in but, try each and once you found the shortcut you were looking for: use it or customize it to your likings.
Hope that helps 🙏
In current version of VSCode it is available like this. You can search this command in the Keyboard Shortcuts
workbench.action.terminal.focusNext
workbench.action.terminal.focusPrevious
If anyone else is so used to switching between tabs with ⌘+[0-9] this mapping in your keybindings.json might useful:
{
"key": "cmd+1",
"command": "workbench.action.terminal.focusAtIndex1",
"when": "terminalFocus"
},
{
"key": "cmd+2",
"command": "workbench.action.terminal.focusAtIndex2",
"when": "terminalFocus"
},
{
"key": "cmd+3",
"command": "workbench.action.terminal.focusAtIndex3",
"when": "terminalFocus"
},
You can also extend the conditional in case you're using the terminal editor (to avoid switching when focused).
{
"key": "cmd+1",
"command": "workbench.action.terminal.focusAtIndex1",
"when": "terminalFocus && !terminalEditorFocus"
},
I'm trying to figure out if there is a way to set up a key binding to allow a quick switch between the terminal windows I have open in the built in terminal rather than having to click on the drop down selector each time. Does anyone know the command for this when making a personal key binding or where I can see a list of all the possible commands for VSC? Thank you in advance!
If you want something that might feel a bit more fluid than using arbitrary key bindings, you can get Ctrl+Tab and Ctrl+Shift+Tab working for both editor switching and terminal switching.
Open your keybindings file with ctrl+shift+p search for Open Keyboard Shortcuts (JSON). Then add..
{
"key": "ctrl+tab",
"command": "workbench.action.openNextRecentlyUsedEditorInGroup",
"when": "editorFocus"
},
{ "key": "shift+ctrl+tab",
"command": "workbench.action.openPreviousRecentlyUsedEditorInGroup",
"when": "editorFocus"
},
{
"key": "ctrl+tab",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
},
{
"key": "ctrl+shift+tab",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus"
}
From Microsofts Documentation there is a tip:
Tip: If you use multiple terminals extensively, you can add key
bindings for the focusNext, focusPrevious and kill commands outlined
in the Key Bindings section to allow navigation between them using
only the keyboard.
From here:
Other terminal commands are available and can be bound to your
preferred keyboard shortcuts. They are:
workbench.action.terminal.focus: Focus the terminal. This is like
toggle but focuses the terminal instead of hiding it, if it is
visible.
workbench.action.terminal.focusNext: Focuses the next terminal instance.
workbench.action.terminal.focusPrevious: Focuses the previous terminal instance.
workbench.action.terminal.kill: Remove the current terminal instance.
workbench.action.terminal.runSelectedText: Run the selected text in the terminal instance.
Just assign these shortcuts to your preferred keybindings and you are good to go.
That might not be a solution for jumping directly to a terminal (e.g. like vims gt2) but it certainly is a start.
Edit: Just toyed around and found that you can also focus on a specific terminal. Just add any of these commands to your keybindings.json and you are good to go!
// - workbench.action.terminal.focusAtIndex1
// - workbench.action.terminal.focusAtIndex2
// - workbench.action.terminal.focusAtIndex3
// - workbench.action.terminal.focusAtIndex4
// - workbench.action.terminal.focusAtIndex5
// - workbench.action.terminal.focusAtIndex6
// - workbench.action.terminal.focusAtIndex7
// - workbench.action.terminal.focusAtIndex8
// - workbench.action.terminal.focusAtIndex9
e.g.
{ "key": "yourkeybinding", "command": "workbench.action.terminal.focusAtIndex1"}
Here's the solution I built that works well for me on OSX.
It mimics the same shortcuts used in the editor to open new files (cmd+n) and switch between tabs (cmd+left|right) and the same shortcuts work for terminals when that view is in focus.
Hit cmd+shift+p and type keyboard to find Preferences: Open Keyboard Shortcuts File
Add the following to the keybindings.json file and save it.
{
"key": "cmd+alt+right",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
},
{
"key": "cmd+alt+left",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus"
},
{
"key": "cmd+n",
"command": "workbench.action.terminal.new",
"when": "terminalFocus"
},
{
"key": "cmd+w",
"command": "workbench.action.terminal.kill",
"when": "terminalFocus"
}
It also does the same for closing terminals (cmd+w)
Based on Haini answer, Add the code below to your keybindings.json
{
"key": "shift+up",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus"
},
{
"key": "shift+down",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
}
Now, you can switch between terminals using shift + down or shift + up
on mac, ⇧⌘[ and ⇧⌘] worked for me.
this allows me to switch between different terminal instances when the terminal has focus. i use ⌘j to toggle focus between the terminal and editor.
source:
Navigate between terminal groups using focus next ⇧⌘] and focus previous ⇧⌘[.
https://code.visualstudio.com/docs/editor/integrated-terminal
As for now it already switches tabs on the editor and terminal, just try ctrl + page up or ctrl + page down.
To switch between terminal you can use below commands
On Mac
cmd + shift + [
cmd + shift + ]
This command will switch between terminal group. To find all commands:
command + shift + p (on mac)
Open keyboard shortcuts
Does anyone know the keyboard shortcut (Mac and Linux) to switch the focus between editor and integrated terminal in Visual Studio Code?
While there are a lot of modal toggles and navigation shortcuts for VS Code, there isn't one specifically for "move from editor to terminal, and back again". However you can compose the two steps by overloading the key and using the when clause.
Solution
You can achieve the desired effect by adding the appropriate settings to the keybindings.json file. Here are the required steps:
Open the Command Palette (Ctrl+Shift+P Windows/Linux or ⇧ ⌘ P Mac).
Type "Preferences: Open Keyboard Shortcuts (JSON)" and press Enter.
Add the following entries to the keybindings.json file:
// Toggle between terminal and editor focus
{
"key": "ctrl+`",
"command": "workbench.action.terminal.focus"
},
{
"key": "ctrl+`",
"command": "workbench.action.focusActiveEditorGroup",
"when": "terminalFocus"
}
With these shortcuts you can focus between the editor and the Integrated Terminal using the same keystroke.
NOTE
The key combination suggested here is now built into VSCode as a default (as of 1.72.2, maybe earlier) . See if ctrl + ` works before attempting to add it.
NOTE
In modern versions of VS Code (as of 2022) the Default Keyboard Shortcuts (JSON) file is read-only, so that is why for the custom settings you need to edit a separate dedicated file keybindings.json.
More info can be found on the official Visual Studio documentation page:
Key Bindings for Visual Studio Code: Advanced customization
ctrl+` : To Focus on Integrated Terminal
ctrl+1 : To Focus on Editor (If editor-2 command would be ctrl+2)
More Info : https://medium.com/p/21969576c09c
Ctrl+J works; but also shows/hides the console.
cmd+J for mac
A little late to the game but I configured mine as the following in the keybindings.json:
{
"key": "ctrl+`",
"command": "workbench.action.terminal.focus",
"when": "editorTextFocus"
},
{
"key": "ctrl+`",
"command": "workbench.action.focusActiveEditorGroup",
"when": "terminalFocus"
},
{
"key": "alt+`",
"command": "workbench.action.terminal.toggleTerminal"
}
I wanted separate keys for opening/closing terminal and switching focus back and forth between the windows.
As of version : 1.26.1 (linux), the shortcut is not set by default.
To set the shortcut
open keyboard shortcuts panel [ctrl + k , ctrl + s]
Search for Focus Terminal
Set your shortcut
For editor focus is already set by default.
I configured mine as following since I found ctrl+` is a bit hard to press.
{
"key": "ctrl+k",
"command": "workbench.action.focusActiveEditorGroup",
"when": "terminalFocus"
},
{
"key": "ctrl+j",
"command": "workbench.action.terminal.focus",
"when": "!terminalFocus"
}
I also configured the following to move between editor group.
{
"key": "ctrl+h",
"command": "workbench.action.focusPreviousGroup",
"when": "!terminalFocus"
},
{
"key": "ctrl+l",
"command": "workbench.action.focusNextGroup",
"when": "!terminalFocus"
}
By the way, I configured Caps Lock to ctrl on Mac from the System Preferences => keyboard =>Modifier Keys.
Another option is to use F6 and shift+F6.
F6 does "Focus Next Part", which will move focus from the editor to Panel below (Terminal, Output, Debug Console, etc).
shift+F6 does "Focus Previous Part", which will move focus from Terminal panel back to editor.
The advantage of this over ctrl + ` is that:
It does not hide the Terminal/Panel (if that's what you prefer. If you prefer to hide/unhide the Terminal, then just use ctrl + `).
This will work with any of the Panels (Terminal, Output, Debug Console, etc).
Hey my steps to make this work were:
ctrl + shift+ p and look for preferences: keyboard shortcuts
or you can use ctrl k + ctrl s to open it directly
Look in the search box for Terminal: Focus Terminal, I set up for myself alt + T alt + T but you can select the combination that you want
Look in the search box for View: Focus Active Editor Group, set up for myself alt + E alt + E but again you can select the combination that you want
That's it, I hope this help
The default keybinding to toggle the integrated terminal is "Ctrl+`" according to VS Code keyboard shortcuts documentation page. If you don't like that shortcut you can change it in your keybindings file by adding something similar to:
{ "key": "ctrl+l", "command": "workbench.action.terminal.toggleTerminal" }
There does not seem to be a default keybinding for simply focusing the bottom panel. So, if you do not want to toggle the bottom panel, you will need to add something similar to the following to your keybindings file:
{ "key": "ctrl+t", "command": "workbench.action.focusPanel" }
Try using ctrl+` to toggles the visibility of the terminal and as a result toggle the focus.
Generally, VS Code uses ctrl+j to open Terminal, so I created a keybinding to switch with ctrl+k combination, like below at keybindings.json:
[
{
"key": "ctrl+k",
"command": "workbench.action.terminal.focus"
},
{
"key": "ctrl+k",
"command": "workbench.action.focusActiveEditorGroup",
"when": "terminalFocus"
}
]
Here is a way to add your own keybinding for switching focus.
Open your VSCode
Press Ctrl+Shift+P and search for keyboard shortcuts and hit this (Preferences: Open Keyboard shortcuts).
Search for 'focus terminal' in the search panel and find this option (Terminal: Focus on Terminal View) and click on the plus icon.
Enter the shortcut as you like which is not used and hit Enter.
Go to Editor mode and try using your shortcut.
Now hit Alt+Shift+T to go to the terminal.
Want to go back to the editor? Just Hit Ctrl+tab
Tested on Windows 10 machine with VSCode(1.52.1)
What's working for my 1.56 VS Code is:
Ctrl + ~ to focus on terminal window from editor
Ctrl + 9 to focus back on editor from terminal
The answer by Shubham Jain is the best option now using the inbuilt keyboard shortcuts.
I mapped
to Ctrl + ;
and remapped
to Ctrl + L
This way you can have move focus between terminal and editor, and toggle terminal all in close proximity.
SIMPLE WINDOWS SOLUTION FOR ANY KEYBOARD LAYOUT (may work for other OS but not tested)
I use a Finnish keyboard so none of the above worked but this should work for all keyboards.
Terminal focus: Hover your mouse over the terminal text in the integrated terminal. The shortcut for focusing on the terminal will pop up - mine for example said CTRL+ö.
Editor focus: as mentioned above use CTRL+1.
It's not exactly what is asked, but I found it very useful and related.
If someone wants to change from one terminal to another terminal also open in the integrate terminal panel of Visual Studio, you can search for:
Terminal: Focus Next Terminal
Or add the following key shortcut and do it faster with keyboard combination.
{
"key": "alt+cmd+right",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
},
{
"key": "alt+cmd+left",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus"
},
100% Working Settings...
[
{ "key": "alt+right", "command": "workbench.action.terminal.focus"},
{ "key": "alt+left", "command": "workbench.action.focusActiveEditorGroup", "when": "terminalFocus"}
]
workbench.action.terminal.focus : To switch from editor to
terminal. workbench.action.focusActiveEditorGroup : To switch
from terminal to editor.
Actually, in VS Code 1.48.1, there is a toggleTerminal command; I don't know if it was available in previous versions ;) You can utilize it in the keybindings.json file.
This worked for me on Windows, and should also works on Linux.
{
"key": "ctrl+alt+right",
"command": "workbench.action.terminal.toggleTerminal",
"when": "editorTextFocus || terminalFocus"
}
For ctrl+` combination to switch between, I tried all of listed answers, but no luck. For those who has similar issue like mine, try the following shortcut within keybindings.json: Tested on VSCode 1.59+
[
{
"key": "ctrl+oem_8","command": "workbench.action.terminal.focus", "when": "!terminalFocus"
},
{
"key": "ctrl+oem_8","command": "workbench.action.focusActiveEditorGroup", "when": "terminalFocus"
}
]
Here is my approach, which provides a consistent way of navigating between active terminals as well as jumping between the terminal and editor panes without closing the terminal view. You can try adding this to your keybindings.json directly but I would recommend you go through the keybinding UI (cmd+K cmd+S on a Mac) so you can review/manage conflicts etc.
With this I can use ctrl+x <arrow direction> to navigate to any visible editor or terminal. Once the cursor is in the terminal section you can use ctrl+x ctrl+up or ctrl+x ctrl+down to cycle through the active terminals.
cmd-J is still used to hide/show the terminal pane.
{
"key": "ctrl+x right",
"command": "workbench.action.terminal.focusNextPane",
"when": "terminalFocus"
},
{
"key": "ctrl+x left",
"command": "workbench.action.terminal.focusPreviousPane",
"when": "terminalFocus"
},
{
"key": "ctrl+x ctrl+down",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus"
},
{
"key": "ctrl+x ctrl+up",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus"
},
{
"key": "ctrl+x up",
"command": "workbench.action.navigateUp"
},
{
"key": "ctrl+x down",
"command": "workbench.action.navigateDown"
},
{
"key": "ctrl+x left",
"command": "workbench.action.navigateLeft",
"when": "!terminalFocus"
},
{
"key": "ctrl+x right",
"command": "workbench.action.navigateRight",
"when": "!terminalFocus"
},
My solution:
has one key
if there's no terminal yet: opens a terminal and focuses on it
if the focus is on the terminal: hide the panel and switch back to editor
if the focus is on the editor and there's a terminal: unhides the terminal pane and focuses on it
{
"key": "ctrl+shift+alt+cmd+t",
"command": "workbench.action.terminal.new",
"when": "!terminalIsOpen"
},
{
"key": "ctrl+shift+alt+cmd+t",
"command": "terminal.focus",
"when": "terminalIsOpen && !terminalFocus"
},
{
"key": "ctrl+shift+alt+cmd+t",
"command": "workbench.action.closePanel",
"when": "terminalIsOpen && terminalFocus"
}
With the key bindings in your keybindings.json:
CTRL+j and CTRL+k shift focus between editors in an editor group and terminal windows in the terimal
CTRL+h and CTRL+l shift focus between editor groups including the terminal
(These key bindings should feel particularly natural to vim users. Others may wish to change exchange h/j/k/l for left/down/up/right)
// In an editor group, ctrl+j and ctrl+k jump between editor windows
{ "key": "ctrl+j", "command": "workbench.action.nextEditorInGroup" },
{ "key": "ctrl+k", "command": "workbench.action.previousEditorInGroup" },
// In the terminal, ctrl+j and ctrl+k jump between terminal windows
{
"key": "ctrl+j",
"command": "workbench.action.terminal.focusNext",
"when": "terminalFocus && terminalHasBeenCreated && !terminalEditorFocus || terminalFocus && terminalProcessSupported && !terminalEditorFocus"
},
{
"key": "ctrl+k",
"command": "workbench.action.terminal.focusPrevious",
"when": "terminalFocus && terminalHasBeenCreated && !terminalEditorFocus || terminalFocus && terminalProcessSupported && !terminalEditorFocus"
},
// In the work area, ctrl+j and ctrl+k jump between editor groups
{ "key": "ctrl+h", "command": "workbench.action.focusPreviousGroup" },
{ "key": "ctrl+l", "command": "workbench.action.focusNextGroup" },
// in the first editor group terminal, jump "back" to the terminal (if there is a terminal open)
{
"key": "ctrl+h",
"when": " terminalHasBeenCreated && terminalIsOpen && activeEditorGroupIndex == 1",
"command": "workbench.action.terminal.focus"
},
// in the last editor group terminal, jump "forward" to the terminal (if there is a terminal open)
{
"key": "ctrl+l",
"when": "terminalHasBeenCreated && terminalIsOpen && activeEditorGroupLast",
"command": "workbench.action.terminal.focus"
},
// in the terminal, jump "back" to the last editor group
{
"key": "ctrl+h",
"command": "workbench.action.focusLastEditorGroup",
"when": "terminalFocus"
},
// in the terminal, jump "forward" to the last first group
{
"key": "ctrl+l",
"command": "workbench.action.focusFirstEditorGroup",
"when": "terminalFocus"
},
I did this by going to setting>Keyboard Shortcuts then in the section where it give a search bar type focus terminal and select the option. It will ask to type the combination which you want to set for this action. DO it. As for editor focus type" editor focus" in the search bar and type your desired key. IF you excellently add a key . it can be removed by going to edit jason as mentioned in above comments
control + '~' will work for toggling between the two. and '`' is just above the tab button.
This shortcut only works in mac.
The shortuct changes based on the keyboard layout (QWERTY/QWERTZ/AZERTA etc.)
To find out your shortuct press Ctrl+Shift+P and go to Preferences: Keyboard Shortcuts.
From there search for View:Toggle Terminal
ctrl + - also works, it means to go back previous cursor position