When I want to run my android app by emulator in the Android Studio 3.2, I have this error. I just want to run the Hello world example.
Emulator: Couldn't statvfs() path
i had the same issue and realized i forgot to install the official nvidia video card drivers.
Related
I'm on Ubuntu 20.04 LTE
My Android SDK Location (shown in Android studio) is /home/myuser/Android/Sdk
The error goes as follows:
✗] Android toolchain - develop for Android devices
✗ Unable to locate Android SDK.
Install Android Studio from: https://developer.android.com/studio/index.html
On first launch it will assist you in installing the Android SDK components.
(or visit https://flutter.dev/docs/get-started/install/linux#android-setup for detailed instructions).
If the Android SDK has been installed to a custom location, please use
`flutter config --android-sdk` to update to that location.
What I did to try to fix it:
Fresh installs of both Flutter (via snap) and Android studio (via apt, because when I install it also via snap, Flutter can't find even Android studio then).
Set configs:
flutter config --android-sdk="/home/myuser/Android/Sdk"
flutter config --android-studio-dir="/opt/android-studio-2021.1.1/android-studio"
Set paths in .bashrc:
export ANDROID_HOME=$HOME/Android/Sdk/
export PATH=$PATH:$ANDROID_HOME/tools/
export PATH=$PATH:$ANDROID_HOME/platform-tools/
In Android studio, I installed:
Dart and Flutter plugins.
SDK Platforms: 9.0(Pie), 10.0(Q), 11.0(R), 12.0(S), Android API 32
SDK Tools:
Android SDK Build-Tools 33-rc2
Android SDK Command-line Tools (latest)
Android Emulator 31.2.9
Android SDK PLatform-Tools 33.0.1
Trying to do flutter doctor --android-licenses doesn't do anything as it can't find Android SDK.
And I also can't run flutter doctor without adding sudo, because it stops after the first result and then runs for infinity.
Go to SDK tools and install all Support Repositories. Also check if there are any empty folders inside your SDK folder, if there are any empty folders, please delete them.Then follow the usual steps you mentioned,
Setting the config,
flutter config --android-sdk "/home/myuser/Android/Sdk"
Then finally run the flutter doctor again.
I use ubuntu too and the below is my environment.
Please try something like this in your vim ~./bashrc or vim ~/.zshrc
Change the paths as it is in your environment:
JAVA_HOME=/usr/lib/jvm/java-11-openjdk-amd64
PATH=$PATH:$HOME/bin:$JAVA_HOME/bin
export JAVA_HOME
export JRE_HOME
export PATH
export PATH=$PATH:~/development/flutter/bin
if it doesn't work try installing Flutter manually:
https://docs.flutter.dev/get-started/install/linux#install-flutter-manually
As the error message says, ANDROID_SDK_ROOT or previously known as ANDROID_HOME are not set in your environment variables.
To fix that, you will need to:
export ANDROID_SDK_ROOT=/path/to/android/studio/installation
export ANDROID_HOME=/path/to/android/studio/installation
export PATH=$PATH:/path/to/android/studio/installation
Due to some legacy reasons, there are a few variables pointing to the same thing. To make sure your Flutter SDK is getting it, you can set all of them.
Note: if you don't want to set them every time your laptop reboots, feel free to add them into ~/.bashrc.
Theoretically, during the installation of Android Studio, the variables above should be set for you, but, in reality, it doesn't always happen which is the reason you are seeing the error message.
Not sure but maybe the problem is caused by snap, since it was sandboxing the applications you install. I remember having a problem like this on something different. You can try installing flutter manually (downloading the zip and so on...) rather than using snap.
I am installing andoid sdk in Intelli idea the error occuring in installation is :
"java.io.IOException: Connection closed at byte 45350576. Expected 326723360 bytes.
Warning: An error occurred while preparing SDK package Android Emulator: Connection closed at byte 45350576. Expected 326723360 bytes.."
I have downloaded and installed Intelli Idea have also installed flutter and dart PLUGINS now for i need emulator for it which i think is inside android sdk but its giving this error while installing it, I am basically learning dart flutter app development . please guide here how to use emulator using android sdk or anyway other than android sdk,
I have already install flutter and android studio, but when I executed flutter doctor ,
doctor found issues
android sdk file not found in path
( AppDate\local\android\sdk\platform\android-29\android.jar)
You can enter the Virtual devices manager in the Android Studio emulator, and download android SDK versions from it, you will have the download options, and then it will work.
Click here:
After here:
Select any Device:
Choose which android version to download.
This will install the desired versions.
AppDate\local\android\sdk\platform\android-29\android.jar
Go to this path and make sure files are not deleted.
Folder should have such files
If It is empty then install it!
open android studio goto File>Settings>Appearance and Behaviour>System Setting>Android SDK
Click on api 29 and download
Make sure android api 29 is installed
I am attempting to run an AVD I have created for API 16 on a Galaxy Nexus:
emulator #Galaxy_Nexus_Jelly_Bean_API_16
which gives the error
PANIC: Missing emulator engine program for 'arm' CPU.
Attempting to start it by pressing the play button from the AVD Manager inside Android Studio bounces something briefly in the tool dock, but it quickly vanishes and nothing shows up and there are no obvious error messages.
I have looked through other posts with similar problems. Most cite Avast on Windows as causing the issue. I am running on a Mac. I do not have Avast installed.
The AVD has the following configuration:
Name: Galaxy_Nexus_Jelly_Bean_API_16
CPU/ABI: Google APIs ARM (armeabi-v7a)
Path: /Users/prisoner/.android/avd/Galaxy_Nexus_API_16.avd
Target: google_apis [Google APIs] (API level 16)
Skin: galaxy_nexus
SD Card: 100 MB
hw.dPad: no
hw.lcd.height: 1280
runtime.network.speed: full
hw.accelerometer: yes
hw.device.name: Galaxy Nexus
vm.heapSize: 80
skin.dynamic: yes
hw.device.manufacturer: Google
hw.lcd.width: 720
hw.gps: yes
hw.initialOrientation: Portrait
image.androidVersion.api: 16
hw.audioInput: yes
image.sysdir.1: add-ons/addon-google_apis-google-16/images/armeabi-v7a/
hw.cpu.model: cortex-a8
tag.id: google_apis
showDeviceFrame: yes
hw.camera.back: virtualscene
hw.mainKeys: no
AvdId: Galaxy_Nexus_Jelly_Bean_API_16
hw.camera.front: emulated
hw.lcd.density: 320
avd.ini.displayname: Galaxy Nexus Jelly Bean API 16
hw.arc: false
hw.gpu.mode: auto
hw.device.hash2: MD5:5c288d27461585ecc73a535555e7cf61
hw.ramSize: 1024
hw.trackBall: no
PlayStore.enabled: false
fastboot.forceColdBoot: no
hw.battery: yes
hw.cpu.ncore: 4
hw.sdCard: no
tag.display: Google APIs
runtime.network.latency: none
hw.keyboard: yes
hw.sensors.proximity: yes
disk.dataPartition.size: 800M
hw.sensors.orientation: yes
avd.ini.encoding: UTF-8
hw.gpu.enabled: yes
Android Studio environment:
Android Studio 3.1.4
Build #AI-173.4907809, built on July 23, 2018
JRE: 1.8.0_152-release-1024-b01 x86_64
JVM: OpenJDK 64-Bit Server VM by JetBrains s.r.o
Mac OS X 10.12.6
I have installed everything for this version of the SDK available in the SDK Manager:
I have the latest version of the emulator installed. I've tried uninstalling and re-installing it.
The ANDROID_HOME environment variable appears to be correctly set (it matches the Android SDK location in the SDK Manager. The emulator program appears to be the one under this home environment as well:
Mulan:~ prisoner$ echo $ANDROID_HOME
/Users/prisoner/Library/Android/sdk
Mulan:~ prisoner$ which emulator
/Users/prisoner/Library/Android/sdk/tools/emulator
As far as I can tell, the emulator and the architecture-specific emulators are also under ANDROID_HOME:
I'm at a loss about where else to look, either for error messages or the emulator that is there, but can't be found by the system, or how else to address the problem.
Update 1: Specify path explicitly.
Trying to specify the paths explicitly doesn't work either:
Mulan:~ prisoner$ /Users/prisoner/Library/Android/sdk/tools/emulator #Galaxy_Nexus_Jelly_Bean_API_16
PANIC: Missing emulator engine program for 'arm' CPU.
Mulan:~ prisoner$ /Users/prisoner/Library/Android/sdk/emulator/emulator #Galaxy_Nexus_Jelly_Bean_API_16
emulator: ERROR: This AVD's configuration is missing a kernel file! Please ensure the file "kernel-qemu" is in the same location as your system image.
emulator: ERROR: ANDROID_SDK_ROOT is undefined
Sure enough, ANDROID_SDK_ROOT isn't defined. Defining it to the same thing as ANDROID_HOME does the following:
Mulan:~ prisoner$ export ANDROID_SDK_ROOT="$ANDROID_HOME"
Mulan:~ prisoner$ /Users/prisoner/Library/Android/sdk/emulator/emulator #Galaxy_Nexus_Jelly_Bean_API_16
emulator: ERROR: This AVD's configuration is missing a kernel file! Please ensure the file "kernel-qemu" is in the same location as your system image.
emulator: ERROR: ANDROID_SDK_ROOT is defined (/Users/prisoner/Library/Android/sdk) but cannot find kernel file in /Users/prisoner/Library/Android/sdk/system-images/ sub directories
Looking underneath the system-images directory, we see a directory for each API platform:
Mulan:~ prisoner$ ls ~/Library/Android/sdk/system-images/
android-16 android-19 android-23 android-26
android-17 android-21 android-24 android-27
android-18 android-22 android-25 android-28
Looking just under the android-16 directory, we have
./default
./default/armeabi-v7a
./default/armeabi-v7a/build.prop
./default/armeabi-v7a/kernel-qemu
./default/armeabi-v7a/NOTICE.txt
./default/armeabi-v7a/package.xml
./default/armeabi-v7a/ramdisk.img
./default/armeabi-v7a/source.properties
./default/armeabi-v7a/system.img
./default/armeabi-v7a/userdata.img
./default/mips
./default/mips/build.prop
./default/mips/kernel-qemu
./default/mips/NOTICE.txt
./default/mips/package.xml
./default/mips/ramdisk.img
./default/mips/source.properties
./default/mips/system.img
./default/mips/userdata.img
./default/x86
./default/x86/build.prop
./default/x86/kernel-qemu
./default/x86/kernel-ranchu
./default/x86/NOTICE.txt
./default/x86/package.xml
./default/x86/ramdisk.img
./default/x86/source.properties
./default/x86/system.img
./default/x86/userdata.img
./google_apis
./google_apis/x86
./google_apis/x86/advancedFeatures.ini
./google_apis/x86/build.prop
./google_apis/x86/kernel-qemu
./google_apis/x86/kernel-ranchu
./google_apis/x86/NOTICE.txt
./google_apis/x86/package.xml
./google_apis/x86/ramdisk.img
./google_apis/x86/source.properties
./google_apis/x86/system.img
./google_apis/x86/userdata.img
Just tried and verified on my Mac, to solve this problem, you need to specify the -kernel path manually. i.e.
$ ~/Library/Android/sdk/emulator/emulator #Galaxy_Nexus_Jelly_Bean_API_16 -kernel ~/Library/Android/sdk/system-images/android-16/default/armeabi-v7a/kernel-qemu
Some references for you:
Emulator error: This AVD's configuration is missing a kernel file
https://developer.android.com/studio/run/emulator-commandline
--- Edit ---
To avoid typing the -kernel argument every time, you can also copy the ~/Library/Android/sdk/system-images/android-16/default/armeabi-v7a/kernel-qemu file to ~/Library/Android/sdk/add-ons/addon-google_apis-google-16/images/armeabi-v7a.
Maybe it is the emulator tool path issue. Try to specify the full path of your emulator path.
Try the answer from here. Windows emulator.exe PANIC: Missing emulator engine program for 'x86' CPU
[Partial answer - to a related issue on the IDE]
I have faced this problem also. My Android Studio couldn't even start the emulator, coming up with an error like "Emulator: Process finished with exit code 1". The fix there was to install/update the relevant system images under SDK Manager -> SDK Platforms (tab) -> Click "Show Package Details" and then "Apply".
However, this doesn't seem to make the CLI command emulator -avd <avd name> run, instead I see the PANIC error, but apparently it's related to the migration of the emulator from the SDK path /tools to /emulator
Android emulator won't start something not found:
21:40 Emulator: [4748]:ERROR:android/android-emu/android/qt/qt_setup.cpp:28:Qt library not found at C:\Android\android-sdk\emulator\lib64\qt\lib
21:40 Emulator: Could not launch 'C:\Android\android-sdk\emulator/qemu/windows-x86_64/qemu-system-aarch64.exe': No such file or directory
21:40 Emulator: Process finished with exit code 2
21:41 Emulator: [1456]:ERROR:android/android-emu/android/qt/qt_setup.cpp:28:Qt library not found at C:\Android\android-sdk\emulator\lib64\qt\lib
21:41 Emulator: Could not launch 'C:\Android\android-sdk\emulator/qemu/windows-x86_64/qemu-system-aarch64.exe': No such file or directory
21:41 Emulator: Process finished with exit code 2
I have gone to this issue and enable Android Emulator option in the Android Studio will fix it.
Could it help!
I can't run the Android Emulator
From your question I noticed the following error log:
21:41 Emulator: [1456]:ERROR:android/android-emu/android/qt/qt_setup.cpp:28:Qt library not found at C:\Android\android-sdk\emulator\lib64\qt\lib
21:41 Emulator: Could not launch 'C:\Android\android-sdk\emulator/qemu/windows-x86_64/qemu-system-aarch64.exe': No such file or directory
This tells us that there is an issue with your Android Virtual Devices SDK.
I suggest you completely uninstall and then reinstall the Android Virtual Devices SDK (AVD Manager).
You can use the following instructions to help you out:
To uninstall/install the AVD Manager, go to Tools > SDK Manager > Android SDK and select the SDK Tools Tab. Then scroll down until you find the Android AVD/Virtual Devices SDK.