VBA Vlookup of range of dates in different sheets - date

I have zero coding experience and am new to VBA, so I don’t even know basics, but giving it a shot. I have a Workbook, with multiple sheet in it. The one that I care about are 2 sheets called DG, and Asp. DG has a button that grabs raw data from a server and populates the sheets ( multiple date columns with data value in adjacent cells). Asp has a button that grabs data as well but on a 30-day avg so every day in a month (columns A in Asp). This is the same case with DG sheet, but DG has data from different dates in a month, because it is not a 30 day pull. So that sets an image for you, now what I want to do is create a button, with a code that can go through a date column in DG and match it with a date from asp date and if there is a match, then copy and paste the adjacent cells values in DG to asp.
This is what I have so far with searches on the internet, showing just a vlookup for a single columns I want filled out in Asp, but its not working
Private Sub CommandButton2_Click()
Dim results As Double
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim lrow As Long
Dim i As Long
Set ws1 = Worksheets("DG")
Set ws2 = Worksheets("Asp")
lrow = Worksheets("Asp").Range("A5", ws2.Range("A5").End(xlUp)).Rows.Count
For i = 5 To lrow
On Error Resume Next
result = Application.WorksheetFunction.VLookup((ws2.Range("A5" & i)), (ws1.Range("A11:B200")), 2, True)
ws2.Range("AG5").Value = result
If Err.Number = 0 Then
End If
On Error GoTo 0
Next i
End Sub
DG [1]: https://i.stack.imgur.com/ZrwfZ.jpg
ASP [2]: https://i.stack.imgur.com/tTsl0.jpg

It's Friday, Here you go, something to look at and study.
I am sorry I didn't use Vlookup, I have spent too much time chasing ghosts with that.
Perhaps others have had better success, I think what I don't like is Vlookup if it fails an exact match sometimes it chooses an adjacent row and throws everything into turmoil.
Here it is:
Option Explicit
Private Sub CommandButton2_Click()
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim lrow2 As Long
Dim lrow1 As Long
Dim firstDataRow As Double
Dim matchRange As Range
Dim matchRow As Long
Dim i As Long
'Set up your Worksheet variables
Set ws1 = ThisWorkbook.Worksheets("DG")
Set ws2 = ThisWorkbook.Worksheets("Asp")
'You used A5 several times, so I will assume dates are in Col A and start at row 5
'Set your row with first data, maybe you need two, if they are the same on both sheets you don't
firstDataRow = 5
'find the last row on each sheet, using column A, the date col
lrow1 = ws1.Cells(ws1.Rows.Count, "A").End(xlUp).Row
lrow2 = ws2.Cells(ws2.Rows.Count, "A").End(xlUp).Row
'In your mind you now have two data ranges, one for each sheet, rows 5-last dat rows
'Pick one sheet, the one with less dates would be more efficient, you mention DG has less
'So this might be built backwards from what you are thinking, since we are iterating each row in the col
'You want to use the shrter call, IF you know its shorter (your comments)
'Loop through each row trying to find a match on your other sheet
For i = firstDataRow To lrow1
If ws1.Cells(i, "A") <> "" Then 'Test for empty
'Here is the premise of Find/Match over Vlookup
Set matchRange = ws2.Range("A" & firstDataRow & ":A" & lrow2).Find(ws1.Cells(i, "A"))
On Error Resume Next
matchRow = matchRange.Row 'Returns row number or nothing
If (Not matchRange Is Nothing) Then
'we have a row number matched on Asp, for our search item on DG
'perform the "Copy", this can be done differently but here I am going to introduce you to a way
'that can later be used with offsets and col #s, so that you may skip columns, data is not always adjacent
ws2.Cells(matchRow, "E") = ws1.Cells(i, "B")
ws2.Cells(matchRow, "F") = ws1.Cells(i, "C")
ws2.Cells(matchRow, "G") = ws1.Cells(i, "D")
Else 'DO NOTHING
End If
Else 'DO NOTHING
End If
Next i
MsgBox "Search and Copy is complete.", vbInformation, "Completed"
End Sub
There is so much more to talk about in even this simple project to make this more bullet proof. But this is a good start for where you are at.
Cheers! Happy Coding! - WWC

Related

VBA Autofilter subset contains extra row up top

The macro attempts to filter Sheet "Temp" for one Criteria at a time (PE, AR, DC,FI), and copy column 5 that contains non-duplicate data into another sheet "Detail". Please help me understand two issues. (1) The macro does correct filtering for each of the 4 criteria. However, the filtered list for each of the criteria always contains the first item from the filtered list of the very first criteria "PE". I.e. the filtered list for criteria 2, "AR", contains all items in AR, but starts with the first item in "PE". There's a header row, but it doesn't seem to make a difference. How can I get rid of that first item in all cases except when filtering for "PE" (where it belongs)? (2) I would like to be able to count and store the number of visible rows for each filtered list. I would like to be able to paste each filtered list into another spreadsheet ("Detail"), starting in cell A4. Each consecutive list should start two rows below the list that was just pasted. For example, if the first list contains 16 items, then the next list should start in cell A22 (A4+16+2). For some reason, copiedrows (used to remember number of rows in a filtered list) is correct the first time around (=16), but not the second time (=1?). It looks like q's 1 & 2 are related. Perhaps, if I figure out #1, I can do something about #2. I reviewed exiting posts on Autofiltering, but still feel a bit stuck here. Really appreciate your help!
Sub FilterCategories()
Dim LastRow As Long
Dim startpos As Integer
Dim k As Integer
Dim copiedrows(1 To 4) As Long
Dim AG(1 To 4) As String
Dim rng As Range
AG(1) = "PE"
AG(2) = "AR"
AG(3) = "DC"
AG(4) = "FI"
'Autofilter based on each AG and copy over to 'Detail'. Create temporary
sheet for filtering.
startpos = 4
For k = LBound(AG) To UBound(AG)
Application.DisplayAlerts = False
On Error Resume Next
Sheets("Temp").Delete
Sheets("Lookup").AutoFilterMode = False
Sheets("Lookup").Copy After:=Sheets("Lookup")
ActiveSheet.Name = "Temp"
With Sheets("Temp")
AutoFilterMode = False
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
With .Range("A2:E" & LastRow)
.AutoFilter Field:=4, Criteria1:=AG(k)
.RemoveDuplicates Columns:=5
.Columns(5).SpecialCells(xlCellTypeVisible).Copy
Destination:=Sheets("Detail").Range("A" & startpos)
copiedrows(k) = .SpecialCells(xlCellTypeVisible).Rows.Count
Debug.Print copiedrows(k)
startpos = copiedrows(k) + 6
Debug.Print startpos
End With
End With
Next
End Sub

SSRS Max date from Lookupset

I've spent a long time looking around for a solution for this and not found quite what I want. Efforts to adapt existing solutions for different problems have also not worked!
I am using LookupSet to return a list of dates, then joining them to return a list:
=Join(LookupSet(Fields!cPatSer.Value,Fields!cPatSer.Value,Fields!DDate.Value,"PatD"))
I want to only show the most recent date from that list. Here is what I have tried so far:
The above function wrapped in a Max function (doesn't work because Join returns a string)
Using a split function to split the resultant string looking for the commas then using the max function
Doing both of the above but converting the output to Date objects using CDate and DateTime.Parse first as follows...
=Join(LookupSet(Fields!cPatSer.Value,Fields!cPatSer.Value,CDate(Fields!DDate.Value),"PatD"))
=Join(LookupSet(Fields!cPatSer.Value,Fields!cPatSer.Value,DateTime.Parse(Fields!DDate.Value),"PatD"))
Can anybody provide any pointers please?
I've found a solution using Custom Code. Oz Locke made a function that does various aggregates for integer data (links below), and I've amended this to work for dates instead.
In the Code property of the report, paste in this:
'Amended from Oz Locke's code:
'https://github.com/OzLocke/SSRSAggLookup/blob/master/AggLookup.vb
'Allows users to adjust the aggregation type of lookupsets in a cell
Function AggLookup(ByVal choice As String, ByVal items As Object)
'Ensure passed array is not empty
'Return a zero so you don't have to allow for Nothing
If items Is Nothing Then
Return 0
End If
'Define names and data types for all variables
Dim current As Date
Dim count As Integer
Dim min As Date
Dim max As Date
Dim err As String
'Define values for variables where required
current = CDate("01/01/1900")
count = 0
err = ""
'Calculate and set variable values
For Each item As Object In items
'Calculate Count
count += 1
'Check value is a number
If IsDate(item) Then
'Set current
current = CDate(item)
'Calculate Min
If min = Nothing Then
min = current
End If
If min > current Then
min = current
End If
'Calculate the Max
If max = Nothing Then
max = current
End If
If max < current Then
max = current
End If
'If value is not a number return "NaN"
Else
err = "NaN"
End If
Next
'Select and set output based on user choice or parameter one
If err = "NaN" Then
If choice = "count" Then
Return count
Else
Return 0
End If
Else
Select Case choice
Case "count"
Return count
Case "min"
Return min
Case "max"
Return max
End Select
End If
End Function
Then in the cell of your report, use this expression:
=code.AggLookup("max", LookupSet(Fields!cPatSer.Value,Fields!cPatSer.Value,Fields!DDate.Value,"PatD"))
https://itsalocke.com/aggregate-on-a-lookup-in-ssrs/
https://github.com/OzLocke/SSRSAggLookup/blob/master/AggLookup.vb

Excel VBA DO loop to scan range of dates and fill in missing dates

I have a worksheet that has ~20,000 rows of data. Each row has a Transaction Date in Column C. Each worksheet will only include data from the previous month. What I am trying to have happen, is to have a loop run through each date and make sure there are no missing dates, if there is a missing date, I need the loop to insert the missing date into a new row. I have found this online and have tried to customize it to my worksheet but cannot get it to work:
Dim i As Long: i = 1
'Adds missing dates as new rows
Do
If Cells(i + 1, "C") > Cells(i, "C") + 1 Then
Rows(i + 1).Insert xlShiftDown
Cells(i + 1, "C") = Cells(i, "C") + 1
End If
i = i + 1
Loop Until Cells(i + 1, "C") = ""
I have a bunch of different macros that format the data into a table and then sort it by the transaction date. I'm not sure if the table creates another issue or not but I can't seem to get it to work.
Any tips are greatly appreciated!
Starting with data that looks like this:
Run this code to loop through the dates bottom up and insert missing rows.
Sub insertMissingDate()
Dim wks As Worksheet
Set wks = Worksheets("Sheet1")
Dim lastRow As Long
lastRow = wks.Range("C2").End(xlDown).Row
'Work bottom up since we are inserting new rows
For i = lastRow To 3 Step -1
curcell = wks.Cells(i, 3).Value
prevcell = wks.Cells(i - 1, 3).Value
'Using a loop here allows us to bridge a gap of multiple missing dates
Do Until curcell - 1 = prevcell Or curcell = prevcell
'Insert new row
wks.Rows(i).Insert xlShiftDown
'Insert missing date into new row
curcell = wks.Cells(i + 1, 3) - 1
wks.Cells(i, 3).Value = curcell
Loop
Next i
End Sub
Results:
A note to anyone using this code- you have to have your date formatted so that in single digit months, (i.e. January- example "1/1/17") you have a zero in front of the month, making it two digit (i.e. 01/1/17). The code will not work unless you do this. There is a data type under "more data formats" on the home page of excel that will include zeros in front of a single digit month. Thanks for the code, it's helping me tremendously!

MS Access 2010 Form Box Control Source IIF Statement

I am running into the Max Character Issue when trying to put my IIF statement into a box I have created for the calculation of a score on my form. The box code is:
=IIf([cbov1]="na" And [cbov2]="na" And [cbov3]="na" And [cbov4]="na" And [cbov5]="na" And [cboV6]="na" And [cboV7]="na" And [cboV8]="na" And [cboV9]="na" And [cboV10]="na" And [cboV11]="na" And [cboV12]="na" And [cboV13]="na" And [cboi1]="na" And [cboi2]="na" And [cboi3]="na" And [cboi4]="na" And [cbop1]="na" And [cbop2]="na" And [cbop3]="na" And [cbop4]="na" And [cbop5]="na" And [cbop6]="na" And [cbop7]="na" And [cbop8]="na" And [cbop9]="na" And [cbop10]="na" And [cbop11]="na" And [cbof1]="na" And [cbof2]="na" And [cbof3]="na" And [cbof4]="na" And [cbof5]="na" And [cbof6]="na" And [cbof7]="na" And [cbof8]="na" And [cbof9]="na" And [cbof10]="na" And [cbom1]="na" And [cbom2]="na" And [cbom3]="na" And [cbom4]="na" And [cbom5]="na" And [cbom7]="na" And [cbom8]="na" And [cbom9]="na" And [cbom10]="na" And [cbom6]="na",0,(IIf([cboV1]="yes",0,0)+IIf([cbov2]="yes",0,0)+IIf([cbov3]="yes",0,0)+IIf([cbov4]="yes",0,0)+IIf([cbov5]="yes",0,0)+IIf([cboV6]="yes",0,0)+ IIf([cboV7]="yes",0,0)+ IIf([cboV8]="yes",0,0)+ IIf([cboV9]="yes",0,0)+ IIf([cboV10]="yes",0,0)+ IIf([cboV11]="yes",0,0)+ IIf([cboV12]="yes",0,0)+ IIf([cboV13]="yes",0,0)+IIf([cboi1]="yes",5,0)+IIf([cboi2]="yes",3,0)+IIf([cboi3]="yes",3,0)+ IIf([cboi4]="yes",4,0)+IIf([cbop1]="yes",5,0)+IIf([cbop2]="yes",5,0)+IIf([cbop3]="yes",5,0)+IIf([cbop4]="yes",5,0)+ IIf([cbop5]="yes",5,0)+ IIf([cbop6]="yes",4,0)+ IIf([cbop7]="yes",4,0)+ IIf([cbop8]="yes",4,0)+ IIf([cbop9]="yes",4,0)+ IIf([cbop10]="yes",2,0)+IIf([cbop11]="yes",2,0)+IIf([cbof1]="yes",1,0)+IIf([cbof2]="yes",1,0)+IIf([cbof3]="yes",1,0)+IIf([cbof4]="yes",1,0)+ IIf([cbof5]="yes",1,0)+ IIf([cbof6]="yes",1,0)+ IIf([cbof10]="yes",0,0)+ IIf([cbof7]="yes",3,0)+ IIf([cbof8]="yes",3,0)+ IIf([cbof9]="yes",3,0)+IIf([cbom1]="yes",5,0)+IIf([cbom2]="yes",1,0)+IIf([cbom3]="yes",1,0)+IIf([cbom4]="yes",1,0)+IIf([cbom5]="yes",1,0)+IIf([cbom6]="yes",1,0) +IIf([cbom7]="yes",3,0) +IIf([cbom8]="yes",2,0) +IIf([cbom9]="yes",5,0) +IIf([cbom10]="yes",5,0))/(IIf([cboV1]="na",0,0)+IIf([cbov2]="na",0,0)+IIf([cbov3]="na",0,0)+IIf([cbov4]="na",0,0)+IIf([cbov5]="na",0,0)+IIf([cboV6]="na",0,0)+ IIf([cboV7]="na",0,0)+ IIf([cboV8]="na",0,0)+ IIf([cboV9]="na",0,0)+ IIf([cboV10]="na",0,0)+ IIf([cboV11]="na",0,0)+ IIf([cboV12]="na",0,0)+ IIf([cboV13]="na",0,0)+IIf([cboi1]="na",0,5)+IIf([cboi2]="na",0,3)+IIf([cboi3]="na",0,3)+ IIf([cboi4]="na",0,4)+IIf([cbop1]="na",0,5)+IIf([cbop2]="na",0,5)+IIf([cbop3]="na",0,5)+IIf([cbop4]="na",0,5)+ IIf([cbop5]="na",0,5)+ IIf([cbop6]="na",0,4)+ IIf([cbop7]="na",0,4)+ IIf([cbop8]="na",0,4)+ IIf([cbop9]="na",0,4)+ IIf([cbop10]="na",0,2)+ IIf([cbop11]="na",0,2)+IIf([cbof1]="na",0,1)+IIf([cbof2]="na",0,1)+IIf([cbof3]="na",0,1)+IIf([cbof4]="na",0,1)+ +IIf([cbof5]="na",0,1)+ +IIf([cbof6]="na",0,1)+ +IIf([cbof7]="na",0,3)+ +IIf([cbof8]="na",0,3)+ +IIf([cbof9]="na",0,3)+ +IIf([cbof10]="na",0,0)+IIf([cbom1]="na",0,5)+IIf([cbom2]="na",0,1)+IIf([cbom3]="na",0,1)+IIf([cbom4]="na",0,1)+IIf([cbom5]="na",0,1)+IIf([cbom6]="na",0,1) +IIf([cbom7]="na",0,3) +IIf([cbom8]="na",0,2) +IIf([cbom9]="na",0,5) +IIf([cbom10]="na",0,5)))*(IIf([cbov1]="no" Or [cbov2]="no" Or [cbov3]="no" Or [cbov4]="no" Or [cbov5]="no" Or [cboV6]="no" Or [cboV7]="no" Or [cboV8]="no" Or [cboV9]="no" Or [cboV10]="no" Or [cboV11]="no" Or [cboV12]="no" Or [cboV13]="no",0,1))
The purpose of the score is to score "Yes" with points, Score "No" as no points, and then have "NA" remove from the overall score. So if a person has 67 out of 67 points, they get a 100. The maximum points is 100 if all questions are answered "Yes" or "No". I need to have all portions of the calculation because CBOV1-13 have a stipulation of if they are "No" the score is automatically 0%.
I don't know of a work around for the MAX CHARACTER you get within the expression builder on the Control Source box via the properties sheet.
Any help on a work around for this issue or ways to make the code shorten and fit with the same end result would be a huge help.
First, I would be tempted to have my field as a numeric (0,1,2 instead of "na,Yes,No"
Then you could use addition...IIF{cvb01 + Cvb02 +cvb03 = 0, 0 ,...else
Using Strings
I can think of two ways. One in the formula using concatenation (ugly)
IIF[cvb01] & [cvb02] & [cvb03] = "NANANA", 0 , ...Else)
I would be more tempted to write a function to take care of it.
dim NAcount as integer
Dim YesCount as integer
Dim NoCount as integer
dim ctr as integer
dim StrAns as string
for ctr = 1 to 10
StrAns = Fields ("cvb" & Ctr)
Select case StrAns
Case "NA"
NaCount = NACount + 1
'...add values here
Case "Yes"
'...more values go here
Case "No"
'... more values
End Select
Next Ctr
...

sum two values from different datasets using lookups in report builder

I have a report that should read values from 2 dataset by Currency:
Dataset1: Production Total
Dataset2: Net Total
Ive tried to use:
Lookup(Fields!Currency_Type.Value,
Fields!Currency_Type1.Value,
Fields!Gross_Premium_Amount.Value,
"DataSet2")
This returns only the first amount from dataset 2.
I've tried Lookupset function as well but it didn't SUM the retrieved values.
Any help would be appreciated.
Thanks Jamie for the reply.
THis is what i have done and it worked perfect:
From Report Properties--> Code , write the below function:
Function SumLookup(ByVal items As Object()) As Decimal
If items Is Nothing Then
Return Nothing
End If
Dim suma As Decimal = New Decimal()
Dim ct as Integer = New Integer()
suma = 0
ct = 0
For Each item As Object In items
suma += Convert.ToDecimal(item)
Next
If (ct = 0) Then return 0 else return suma
End Function
Then you can call the function:
code.SumLookup(LookupSet(Fields!Currency_Type.Value, Fields!Currency_Type1.Value,Fields!Gross_Premium_Amount.Value, "DataSet2"))
Yes, Lookup will only return the first matching value. Three options come to mind:
Change your query, so that you only need to get one value: use a GROUP BY and SUM(...) to combine your two rows in the query. If you are using this query other places, then make a copy and change that.
Is there some difference in the rows? Such as one is for last year and one is for this year? If so, create an artificial lookup key and lookup the two values separately:
=Lookup(Fields!Currency_Type.Value & ","
& YEAR(DATEADD(DateInterval.Year,-1,today())),
Fields!Currency_Type1.Value & ","
& Fields!Year.Value,
Fields!Gross_Premium_Amount.Value,
"DataSet2")
+
Lookup(Fields!Currency_Type.Value & ","
& YEAR(today()),
Fields!Currency_Type1.Value & ","
& Fields!Year.Value,
Fields!Gross_Premium_Amount.Value,
"DataSet2")
Use the LookupSet function as mentioned. With this you'll get a collection of the values back, and then need to add those together. The easiest way to do this is with embedded code in the report. Add this function to the report's code:
Function AddList(ByVal items As Object()) As Double
If items Is Nothing Then
Return 0
End If
Dim Total as Double
Total = 0
For Each item As Object In items
Total = Total + CDbl(item)
Next
Return Total
End Function
Now call that with:
=Code.AddList(LookupSet(Fields!Currency_Type.Value,
Fields!Currency_Type1.Value,
Fields!Gross_Premium_Amount.Value,
"DataSet2"))
(Note: this code was not tested. I just composed it in the Stack Overflow edit window & I'm no fan of VB. But it should give you a good idea of what to do.)