Hello! I'm trying to set up a CollectionView, that scrolls only when user scrolls another element (view with arrows on the image). Also, depending on which cell is in the middle of the screen, text in label should change to match this cell.
I've done the scrolling part this way: when user pans view with arrows, collection also moves, but not scrolls:
else if sender.state == .changed {
if scrollButtonImageView.frame.maxY < scrollRangeView.frame.maxY {
scrollButtonImageView.center = CGPoint(x: originalPosition.x, y: originalPosition.y + translation.y)
collectionView.center.y = scrollButtonImageView.center.y
My question is: Which is the proper way to scroll CollectionView without touching it and how to observe which cell is in the center of the screen and change data in labels instantly, when another cell got into center?
UPD: Now I'm using UISlider with same number of values as collection. But it is not very smooth. My code:
let currentValue = Int(sender.value)
collectionView.scrollToItem(at: IndexPath(row: currentValue, section: 0), at: .top, animated: true)
One plan might be to describe a rectangle for the area that you'd like to consider as in view (maybe as a fixed rectangle above the collection view) and then use the CGRect functions contains or intersection to identify when a child view of the collection is within the target area.
I have got an UIButton on a storyboard ViewController. When I load data into the form and the layout is significantly changing the button does not recognise the touch action.
I have figured out that when button is visible on the scrollview right after it if filled with data, the touch action works.
If the data too long and the button is not visible at first, just when it is scrolled into the display, the touch action does not work.
I was checking if something is above the button, but nothing. I have tried to change the zPosition of the button, not solved the problem.
What can be the issue?
I have made custom classes from the UIScrollView and the UIButton to check how the touches event triggered. It is showing the same behaviour, which is obvious. If the button is visible right at the beginning, the UIButton's touchesBegan event is triggered. If the button moves down and not visible at the beginning, it is never triggered, but the scrollview's touchesBegan is called instead.
Depending on the size of the data I load into the page sometimes the button is visible at the beginning, but the form can be still scrolled a bit. In this case the button still work, so it seems that this behaviour is not depending on if the scrollview is scrolled before or not, just on the initial visibility of the button.
Is there any layout or display refresh function which should be called to set back the behaviour to the button?
The code portion which ensures that the contentview is resized for the scroll if the filled data requires bigger space.
func fillFormWithData() {
dispDescription.text = jSonData[0]["advdescription"]
dispLongDescription.text = jSonData[0]["advlongdesc"]
priceandcurrency.text = jSonData[0]["advprice"]! + " " + jSonData[0]["advpricecur"]!
validitydate.text = jSonData[0]["advdate"]!
contentview.layoutIfNeeded()
let contentRect = CGRect(x: 0, y: 0, width: scrollview.frame.width, height: uzenetbutton.frame.origin.y+uzenetbutton.frame.height+50)
contentview.frame.size.height = contentRect.size.height
scrollview.contentSize = contentview.bounds.size
}
Ok, so another update. I have coloured the contentview background to blue and the scrollview background to white. When I load the data and resize the layout constraints, the contentview is resizing as expected, however now the scrollview is going to the bottom. After I scroll the view it is resizing to the original size which fits the screen. Now the button is only recognised when I touch the are which is blue behind. With the white background it is not recognised anymore, so it seems that the scrollview is hiding the button.
Let me get this clear the button is added in storyboard and it is a spritekit project?? If you are using zPosition?? Why don’t u connect the UIButton via the assistant editor as an IBAction then the action is always tied to the button.
You can also do it differently
Create an SKLabelNode and put it on the screen where you want to have the button and then set a name to it as myButton
override func touchesBegan(_ touches: Set<UITouch>, with event:
UIEvent?) {
if let touch = touches.first {
let location = touch.location(in: self)
let tappedNodes = nodes(at: location)
for node in tappedNodes {
if node.name == "myButton" {
// call your action here
}
}
}
}
EDIT 1:
You could also try auto resizing your scrollView.content this works also if you are adding any views via the app or programmatically
private func resizeScrollView(){
print("RESIZING THE SCROLLVIEW from \(scrollView.contentSize)")
for view in scrollView.subviews {
contentRect = contentRect.union(view.frame)
}
scrollView.contentSize = CGSize(width: contentRect.size.width, height: contentRect.size.height + 150)
print("THE CONTENT SIZE AFTER RESIZING IS: \(scrollView.contentSize)")
}
EDIT 2: I think I found the issue with your project. You need to move the MessageButton(UzenetButton) above DispDescription label in the object inspector in that way it will always be above your message textView.
At the moment the UzeneButton is at the very far back in your view hierarchy so if your textView is resizing whilst editing it covers the button that is why you cannot click on it.
See #Endre Olah,
To make situation more clear do one more thing, set clipToBound property of contentview to true.
you will notice that after loading of data your button not fully visible, it means it is shifting out of bound of its parentView (ContentView)
And that's why button is not taking your touch. However, if you carefully touch upper part of button it still do its job. Because upper part is still in bound of ContentView
Solution :
After loading of data you have to make sure that you increase height of ContentView such that button should never go out of bound of its parentView(ContentView).
FOR EXAMPLE
#IBOutlet var heightConstraintOfContentView : NSLayoutConstraint!
After loading of data
let contentRect = CGRect(x: 0, y: 0, width: scrollview.frame.width, height: uzenetbutton.frame.origin.y+uzenetbutton.frame.height+50)
heightConstraintOfContentView.constant = contentRect.size.height
contentView.layoutIfNeeded()
I use following steps when I need to use scrollview with dynamic content:
1) Firstly add a scrollView with top, bottom, trailing and leading is 0 to super view.
2) Add a view to scrollView and view's trailing, leading bottom and top space to scrollView can be set to 0 (or you can add margin optionally).
3) Now, you should add UI elements like buttons, labels with appropriate top, bottom, trailing and leading margins to each other.
4) Lastly, add equal height and equal width constraint to view with Safe Area:
and change equal height priority of view to 250:
It should solve your problem with UIScrollView.
Finally, I have found the solution in another chain, once it became clear that the scrollview's contentview is resizing on scroll event to the original size. (Not clear why this is like this, but that is the fact.)
So I had to add a height constraint to the contentview in the storyboard and create an outlet to it and adjust this constraint when the content size is changing, like this:
#IBOutlet weak var ContentViewHeight: NSLayoutConstraint!
func fillFormWithData() {
dispDescription.text = jSonData[0]["advdescription"]
dispLongDescription.text = jSonData[0]["advlongdesc"]
priceandcurrency.text = jSonData[0]["advprice"]! + " " + jSonData[0]["advpricecur"]!
validitydate.text = jSonData[0]["advdate"]!
contentview.layoutIfNeeded()
let contentRect = CGRect(x: 0, y: 0, width: scrollview.frame.width, height: uzenetbutton.frame.origin.y+uzenetbutton.frame.height+50)
contentview.bounds = contentRect
scrollview.contentSize = contentRect.size
----------- This is the key line to the success ----------
ContentViewHeight.constant = contentRect.size.height
----------------------------------------------------------
}
After this is added, it works perfectly.
When a user selects the bottom text field all elements in the view move up by the height of the keyboard until the user dismisses the keyboard.
The problem occurs after the user selects the bottom text field. Initially the elements all move up correctly. However, when the first character is typed by the user all of the elements move back down to the original position. As a result, the user can no longer see the text field they are editing. Once the user dismisses the keyboard they see the elements go up where they should have been, and then come right back down to the original position.
I have narrowed down what is causing the issue, but I do not understand why it is happening. My project can be found on GitHub at https://github.com/JMNolan/memesicle
I am still very new to Swift and fairly new to coding in general, so all help is really appreciated. I have also included the code snippets below that are relevant to this process for anyone who does not want to use GitHub
This is what moves the elements up the height of the keyboard
//moves the view up when the keyboard appears to keep the text field
visible
#objc func keyboardWillShow (notification: NSNotification){
if bottomTextFieldActive == true{
keyboardHeight = getKeyboardHeight(notification:
notification)
imagePickerView.frame.origin.y -= keyboardHeight
topText.frame.origin.y -= keyboardHeight
bottomText.frame.origin.y -= keyboardHeight
toolbar.frame.origin.y -= keyboardHeight
}
}
This is what moves the elements back down the height of the keyboard when the keyboard is dismissed
//moves the view down when the keyboard is dismissed to show the full view again
#objc func keyboardWillHide (notification: NSNotification){
imagePickerView.frame.origin.y += keyboardHeight
topText.frame.origin.y += keyboardHeight
bottomText.frame.origin.y += keyboardHeight
toolbar.frame.origin.y += keyboardHeight
//shareButton.frame.origin.y += keyboardHeight
print("keyboard just hid")
}
This is what calls the function above
func subscribeToKeyboardNotifications(){
NotificationCenter.default.addObserver(self, selector:
#selector(keyboardWillShow), name:
NSNotification.Name.UIKeyboardWillShow, object: nil)
NotificationCenter.default.addObserver(self, selector:
#selector(keyboardWillHide), name:
NSNotification.Name.UIKeyboardWillHide, object: nil)
}
This is how I get the keyboardHeight used when moving the elements up and down the height of the keyboard.
//get the height of the keyboard to determine how far up to move the view when editing the bottom text field
func getKeyboardHeight(notification: NSNotification) -> CGFloat {
let userinfo = notification.userInfo
let keyboardSize = userinfo![UIKeyboardFrameEndUserInfoKey] as!NSValue
return keyboardSize.cgRectValue.height
}
The reason your screen elements are jumping around when you type in the UITextField is because of your view constraints. When you add constraints to your view, you kind of forfeit the ability to later move the subviews around by altering their frames - each time the view recalculates the location of its subviews, it will go back to using the original values as provided by the constraints and ignore the frame changes you made.
Since you've got a few different screen elements you want to move, the easiest way to solve this is to put all your subviews (text field, image view, etc) inside a UIScrollView and then resize the scroll view's content inset property when the keyboard comes up. This would completely replace your code that changes the frame sizes. Apple has a help document about how to do this, but the important parts are below:
Adjusting your content typically involves temporarily resizing one or more views and positioning them so that the text object remains visible. The simplest way to manage text objects with the keyboard is to embed them inside a UIScrollView object or one of its subclasses, like UITableView. Note that UITableViewController automatically resizes and repositions its table view when there is inline editing of text fields (to learn more, see View Controllers and Navigation-Based Apps).
When the keyboard is displayed, all you have to do is reset the content area of the scroll view and scroll the desired text object into position. Thus, in response to a UIKeyboardDidShowNotification, your handler method would do the following:
Get the size of the keyboard.
Adjust the bottom content inset of your scroll view by the keyboard height.
Scroll the target text field into view.
// Called when the UIKeyboardDidShowNotification is sent.
- (void)keyboardWasShown:(NSNotification*)aNotification
{
NSDictionary* info = [aNotification userInfo];
CGSize kbSize = [[info objectForKey:UIKeyboardFrameEndUserInfoKey] CGRectValue].size;
UIEdgeInsets contentInsets = UIEdgeInsetsMake(0.0, 0.0, kbSize.height, 0.0);
scrollView.contentInset = contentInsets;
scrollView.scrollIndicatorInsets = contentInsets;
// If active text field is hidden by keyboard, scroll it so it's visible
// Your app might not need or want this behavior.
CGRect aRect = self.view.frame;
aRect.size.height -= kbSize.height;
if (!CGRectContainsPoint(aRect, activeField.frame.origin) ) {
[self.scrollView scrollRectToVisible:activeField.frame animated:YES];
}
}
// Called when the UIKeyboardWillHideNotification is sent
- (void)keyboardWillBeHidden:(NSNotification*)aNotification
{
UIEdgeInsets contentInsets = UIEdgeInsetsZero;
scrollView.contentInset = contentInsets;
scrollView.scrollIndicatorInsets = contentInsets;
}
I faced the same issue, and after read shocking's answer, I found a solution. Thank shocking
I overrode updateViewConstraints() method, and inside, I updated constraint for TextView bottom to View bottom, with constant = keyboard height.
override func updateViewConstraints() {
writeCommentView.autoPinEdge(toSuperviewEdge: .bottom, withInset: keyboardHeight) //I use PureLayout library
super.view.updateConstraints()
}
And then, I call updateViewConstraints() in keyboardWillShow(), keyboardWillHide()
#objc func keyboardWillShow(notification: NSNotification) {
//Code for move up textview here
self.updateViewConstraints()
}
My search bar is at the top of the screen, hiding underneath the navigation bar. I'd like to show the search bar when the user is panning, only when the table view is at the top (at row 0). Can someone explain this?
I've tried using the pan gesture, but then the search bar will show every time I pan downwards.
func showSearchBar(recognizer: UIPanGestureRecognizer) {
if recognizer.state == .Changed {
let translation = recognizer.translationInView(view)
if searchBarConstraint.constant < searchBar.bounds.height {
searchBarConstraint.constant += translation.y
}
}
}
As UITableView is a subclass of UIScrollView you can use its contentOffset to determine whether the table view is at the top or not:
let isAtTop = tableView.contentOffset.y == 0
Of course this only works it you have not set the default contentOffset to another point. Otherwise you would have to check for the y value of your default contentOffset.
I need to do this app that has a weird configuration.
As shown in the next image, the main view is a UIScrollView. Then inside it should have a UIPageView, and each page of the PageView should have a UITableView.
I've done all this so far. But my problem is that I want the scrolling to behave naturally.
The next is what I mean naturally. Currently when I scroll on one of the UITableViews, it scrolls the tableview (not the scrollview). But I want it to scroll the ScrollView unless the scrollview cannot scroll cause it got to its top or bottom (In that case I'd like it to scroll the tableview).
For example, let's say my scrollview is currently scrolled to the top. Then I put my finger over the tableview (of the current page being shown) and start scrolling down. I this case, I want the scrollview to scroll (no the tableview). If I keep scrolling down my scrollview and it reaches the bottom, if I remove my finger from the display and put it back over the tebleview and scroll down again, I want my tableview to scroll down now because the scrollview reached its bottom and it's not able to keep scrolling.
Do you guys have any idea about how to implement this scrolling?
I'm REALLY lost with this. Any help will be greatly appreciate it :(
Thanks!
The solution to simultaneously handling the scroll view and the table view revolves around the UIScrollViewDelegate. Therefore, have your view controller conform to that protocol:
class ViewController: UIViewController, UIScrollViewDelegate {
I’ll represent the scroll view and table view as outlets:
#IBOutlet weak var scrollView: UIScrollView!
#IBOutlet weak var tableView: UITableView!
We’ll also need to track the height of the scroll view content as well as the screen height. You’ll see why later.
let screenHeight = UIScreen.mainScreen().bounds.height
let scrollViewContentHeight = 1200 as CGFloat
A little configuration is needed in viewDidLoad::
override func viewDidLoad() {
super.viewDidLoad()
scrollView.contentSize = CGSizeMake(scrollViewContentWidth, scrollViewContentHeight)
scrollView.delegate = self
tableView.delegate = self
scrollView.bounces = false
tableView.bounces = false
tableView.scrollEnabled = false
}
where I’ve turned off bouncing to keep things simple. The key settings are the delegates for the scroll view and the table view and having the table view scrolling being turned off at first.
These are necessary so that the scrollViewDidScroll: delegate method can handle reaching the bottom of the scroll view and reaching the top of the table view. Here is that method:
func scrollViewDidScroll(scrollView: UIScrollView) {
let yOffset = scrollView.contentOffset.y
if scrollView == self.scrollView {
if yOffset >= scrollViewContentHeight - screenHeight {
scrollView.scrollEnabled = false
tableView.scrollEnabled = true
}
}
if scrollView == self.tableView {
if yOffset <= 0 {
self.scrollView.scrollEnabled = true
self.tableView.scrollEnabled = false
}
}
}
What the delegate method is doing is detecting when the scroll view has reached its bottom. When that has happened the table view can be scrolled. It is also detecting when the table view reaches the top where the scroll view is re-enabled.
I created a GIF to demonstrate the results:
Modified Daniel's answer to make it more efficient and bug free.
#IBOutlet weak var scrollView: UIScrollView!
#IBOutlet weak var tableView: UITableView!
#IBOutlet weak var tableHeight: NSLayoutConstraint!
override func viewDidLoad() {
super.viewDidLoad()
//Set table height to cover entire view
//if navigation bar is not translucent, reduce navigation bar height from view height
tableHeight.constant = self.view.frame.height-64
self.tableView.isScrollEnabled = false
//no need to write following if checked in storyboard
self.scrollView.bounces = false
self.tableView.bounces = true
}
func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
return 20
}
func tableView(_ tableView: UITableView, viewForHeaderInSection section: Int) -> UIView? {
let label = UILabel(frame: CGRect(x: 0, y: 0, width: tableView.frame.width, height: 30))
label.text = "Section 1"
label.textAlignment = .center
label.backgroundColor = .yellow
return label
}
func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
let cell = tableView.dequeueReusableCell(withIdentifier: "cell", for: indexPath)
cell.textLabel?.text = "Row: \(indexPath.row+1)"
return cell
}
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView == self.scrollView {
tableView.isScrollEnabled = (self.scrollView.contentOffset.y >= 200)
}
if scrollView == self.tableView {
self.tableView.isScrollEnabled = (tableView.contentOffset.y > 0)
}
}
Complete project can be seen here:
https://gitlab.com/vineetks/TableScroll.git
After many trials and errors, this is what worked best for me. The solution has to solve two needs 1) determine who's scrolling property should be used; tableView or scrollView? 2) make sure that the tableView doesn't give authority to the scrollView until it has reached the top of it's table/content.
In order to see if the scrollview should be used for scrolling vs the tableview, i checked to see if the UIView right above my tableview was within frame. If the UIView is within frame, it's safe to say the scrollView should have authority to scroll. If the UIView is not within frame, that means that the tableView is taking up the entire window, and therefor should have authority to scroll.
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView.bounds.intersects(UIView.frame) == true {
//the UIView is within frame, use the UIScrollView's scrolling.
if tableView.contentOffset.y == 0 {
//tableViews content is at the top of the tableView.
tableView.isUserInteractionEnabled = false
tableView.resignFirstResponder()
print("using scrollView scroll")
} else {
//UIView is in frame, but the tableView still has more content to scroll before resigning its scrolling over to ScrollView.
tableView.isUserInteractionEnabled = true
scrollView.resignFirstResponder()
print("using tableView scroll")
}
} else {
//UIView is not in frame. Use tableViews scroll.
tableView.isUserInteractionEnabled = true
scrollView.resignFirstResponder()
print("using tableView scroll")
}
}
hope this helps someone!
None of the answers here worked perfectly for me. Each one had it's owned nuanced problem (needing to do a repeated swipe when one scrollview hit it's bottom, or the scroll indicator not looking correct, etc), so figured I'd throw in another answer.
Ole Begemann has a great write up on doing this exactly https://oleb.net/blog/2014/05/scrollviews-inside-scrollviews/
Despite being an old post, the concepts still apply to the current APIs. Additionally, there is a maintained (Xcode 9 compatible) Objective-C implementation of his approach https://github.com/eyeem/OLEContainerScrollView
If you are facing problem with the nested scrolling issue , here tis the simplest solution for it .
go to your design screen
select your scroll view and then disable bounce on scroll
if your view uses table view inside scroll view then disable bounce on scroll of the table view as well
run and check it is solved
check how to disable bounce on scroll of a scroll view
check how to disable bounce on scroll of a tableview view
I was struggling with this problem, too. There is a very simple solution.
In interface builder:
create simple ViewController
add a simple View, it will be our header, and constrain it to superview
it's the red view on the example below
I have added 12px from top, left and right, and set fixed height to 128px
embed a PageViewController, making sure it is constrained to the superview, and not the header
Now, here comes the fun part: for each page you add, make sure its tableView has an offset from top. Thats it. You can do if with this code, for example (assuming you use UITableViewController as a page):
override func viewDidLayoutSubviews() {
super.viewDidLayoutSubviews()
let tables = viewControllers.compactMap { $0 as? UITableViewController }
tables.forEach {
$0.tableView.contentInset = UIEdgeInsets(top: headerView.bounds.height, left: 0, bottom: 0, right: 0)
$0.tableView.contentOffset = CGPoint(x: 0, y: -headerView.bounds.height)
}
}
No messy scroll inside scroll inside table view, no mangling with delegates, no duplicated scrolls, perfectly natural behavior. If you can't see the header, it is probably because of the tableView background color. You have to set it to clear, for the header to be visible from under the tableView.
I think there are two options.
Since you know the size of the scroll view and the main view, you are unable to tell whether the scroll view hit the bottom or not.
if (scrollView.contentOffset.y >= (scrollView.contentSize.height - scrollView.frame.size.height)) {
// reach bottom
}
So when it hit; you basically set
[contentScrollView setScrollEnabled:NO];
and other way around for your tableView.
The other thing, which is more precise I think, is to add Gesture to your views.
UITapGestureRecognizer *tapRecognizer = [[UITapGestureRecognizer alloc]
initWithTarget:self action:#selector(respondToTapGesture:)];
// Specify that the gesture must be a single tap
tapRecognizer.numberOfTapsRequired = 1;
// Add the tap gesture recognizer to the view
[self.view addGestureRecognizer:tapRecognizer];
// Do any additional setup after loading the view, typically from a nib
So when you add Gesture, you can simply control the active view by changing setScrollEnabled in the respondToTapGesture.
I found an awesome library
MXParallaxHeader
In Storyboard just set UIScrollView class to MXScrollView then magic happens.
I used this class to handle my UIScrollView when I embed a UIPageViewController container view. even you can insert a parallax header view for more detail.
Also, this library provides Cocoapods and Carthage
I attached an image below which represent UIViewHierarchy.
MXScrollView Hierarchy
SWIFT 5
I had some trouble using Vineet's answer for when I could not guarantee the scrollView content offset (Y) due to various different screen sizes. To resolve this, I changed the first trigger event of when the tableView's scroll gets enabled.
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView.bounds.contains(button.frame) {
tableView.isScrollEnabled = true
}
if scrollView == tableView {
self.tableView.isScrollEnabled = (tableView.contentOffset.y > 0)
}
}
The scrollView.bounds.contains will check if a given element's frame is FULLY within the scrollView's visible content. I set this to a button that I have below the tableView. You could set this to your tableVIew's frame instead if your only condition is that your tableView is fully visible.
I left the original implementation of when to disable the tableView's scroll and it works very well.
I tried the solution marked as the correct answer, but it was not working properly. The user need to click two times on the table view for scroll and after that I was not able to scroll the entire screen again. So I just applied the following code in viewDidLoad():
tableView.addGestureRecognizer(UISwipeGestureRecognizer(target: self, action: #selector(tableViewSwiped)))
scrollView.addGestureRecognizer(UISwipeGestureRecognizer(target: self, action: #selector(scrollViewSwiped)))
And the code below is the implementation of the actions:
func tableViewSwiped(){
scrollView.isScrollEnabled = false
tableView.isScrollEnabled = true
}
func scrollViewSwiped(){
scrollView.isScrollEnabled = true
tableView.isScrollEnabled = false
}
One easy trick, if you want to achieve it is replacing parent scrollview with normal container view.
Adding a pan gesture on container view, you can play with top constraint of first view to assign negative values. You can keep a check of page View's origin if it achieves to top you can start assigning that value on content offset of the pageView's child view. Until user achieves the table view in a state of top most view in container view, you can keep page tableView's scrolling disabled and allow scrolling manually by setting content offset.
So initially the page view height will be collapsed (or say out of screen) or less at bottom. Later on scrolling down it will expand to take more space.
Gesture will automatically stop responding if out of frames say on nav bar or other view outside container view.
Gestures are a key to user interactive transitions used in many apps. You can mimic scroll for a certain time with it.
In my case I'm using constraint for height like that:
self.heightTableViewConstraint.constant = self.tableView.contentSize.height
self.scrollView.contentInset.bottom = self.tableView.contentSize.height
Below code works great for me
As I wanted to show some header after some scroll and table view supposed to scroll
And in ViewDidLoad add
override func viewDidLoad() {
super.viewDidLoad()
mainScrollView.delegate = self
}
Change 265 to whatever number you want to stop upper scroll
extension AccountViewController: UIScrollViewDelegate {
func scrollViewDidScroll(_ scrollView: UIScrollView) {
print(notebookTableView.contentOffset.y)
if notebookTableView.contentOffset.y < 265 {
if notebookTableView.contentOffset.y > 0 {
mainScrollView.setContentOffset(notebookTableView.contentOffset, animated: false)
} else {
mainScrollView.setContentOffset(CGPoint(x: 0.0, y: 0.0), animated: false)
}
} else {
mainScrollView.setContentOffset(CGPoint(x: 0.0, y: 265), animated: false)
}
}
}
CGFloat tableHeight = 0.0f;
YourArray =[response valueForKey:#"result"];
tableHeight = 0.0f;
for (int i = 0; i < [YourArray count]; i ++) {
tableHeight += [self tableView:self.aTableviewDoc heightForRowAtIndexPath:[NSIndexPath indexPathForRow:i inSection:0]];
}
self.aTableviewDoc.frame = CGRectMake(self.aTableviewDoc.frame.origin.x, self.aTableviewDoc.frame.origin.y, self.aTableviewDoc.frame.size.width, tableHeight);
Maybe brute-force, but working perfectly if cell heights are the same: by the way, I use auto layout.
for the tableView (or collectionView or whatever), set an arbitrary height in storyboard, and make an outlet to class. Wherever appropriate, (viewDidLoad() or...) set the tableView's height big enough so that tableView doesn't need to scroll. (need to know the number of rows in advance) Then only the outer scrollView will scroll nicely.